Le manuscrit porte sur l'élaboration de couches minces ayant des propriétés barrières aux liquides, aux gaz et aux ultra-violets. Pour réaliser nos différents systèmes, la technologie plasma à décharge à barrière diélectrique à la pression atmosphérique (DBD) a été utilisée. Dans la première partie, des films polymère plasma à base de 1H, 1H, 2H, 2H, Perfluorodecyl acrylate ont été développé. En fonction des paramètres plasma une surface dîtes superhydrophobe en une étape a été obtenue grâce à l'obtention d'un film composé de nanoparticules fluorés. La seconde partie des travaux a consisté à développer des films barrières aux gaz à partir de l'hexamethyldisiloxane. Ainsi, des films minces SiOx et multicouches SiOxHyCz/SiOx ont pu être obtenue afin d'améliorer les performances barrières de substrat PET et PEN. Enfin, l'obtention de film barrière aux UV a consisté à une croissance in-situ de nanoparticules de dioxyde de titane (TiO2) à partir du film polymère plasma. La matrice polymère constitué d'une structure siloxane et aminée plasma joue le rôle de nano-réacteur pour la croissance de cristaux de TiO2. / This works presents the development of plasma-polymrized surfaces for superhydrophobic, gas barrier and UV attenuation properties. These functional coatings have been deposited by means of atmospheric pressure dielectric barrier discharge (DBD). The first part deals on the plasma polymerization of the de 1H, 1H, 2H, 2H, Perfluorodecyl acrylate. According to the plasma parameters, surperhydrophobic coatings have obtained on several substrates. Morphologies analysis have shown the formation of fluorinate nanoparticles. The second part of the work was to develop gas barrier films from hexamethyldisiloxane. Thus, SiOx thin films and SiOxHyCz / SiOx multilayers have been obtained in order to improve the barrier performance of PET and PEN substrate. Finally, obtaining UV barrier film was to an in-situ growth of nanoparticles of titanium (TiO2) dioxide from the plasma polymer filin. The plasma polymer acts as a nano-reactor for the growth of TiO2 nanoparticles

Es wird gezeigt, dass mit dem Fluoreszenzmesssystem sowohl die Schichtdicke als auch die Aushärtung detektiert werden kann. Durch das Erstellen von Eichkurven ist es so möglich, vollflächig, die genaue Schichtdicke der Beschichtung im laufenden Prozess inline zu bestimmen und Abweichungen in Echtzeit entgegenzuwirken. Zudem können so Unregelmäßigkeiten bei der Aushärtung der Lacke direkt erkannt und bei unzureichender Aushärtung der Anteil von Fehlproduktionen minimiert werden. Auch bei hochvernetzten Acrylatklebstoffen konnte gezeigt werden, dass mit dem System eine genaue Analyse der inneren Festigkeit vorgenommen werden kann. Diese Klebstoffe, mit teilweise unterschiedlichem chemischen Aufbau, aber gleichem E-Modul, emittieren dasselbe Maß an Fluoreszenz. Somit konnte gezeigt werden, dass mit der Fluoreszenzmessung, unabhängig von der chemischen Struktur, gleichbleibende Intensitäten gemessen und damit der Aushärtegrad bestimmt werden kann. Zur genauen Bestimmung der Schichtdicken mit dem Fluoreszenzmesssystem ist es notwendig genaue Eichkurven für jedes einzelne System zu erstellen. Auch ist es, im Falle der Molkeprotein Beschichtungen notwendig weitere Formulierungen zu testen um eine exakte Vorhersage des Vernetzungsgrads zu gewährleisten. Durch die Ergebnisse die mit den Acrylatklebstoffen erzielt wurden stellt sich die Frage, inwieweit eine Korrelation zwischen der chemischen Struktur des untersuchten Materials und der gemessenen Fluoreszenz dabei besteht. Es sollte die Fluoreszenz von weiteren Materialien, unterschiedlicher chemischer Struktur, gemessen und überprüft werden, ob ein Zusammenhang zu deren E-Modul besteht. Außerdem sind Materialien wie z.B. Klebstoffe und Lacke auf Polyurethanbasis, deren Aushärtung erst nach mehreren Tagen oder Wochen abgeschlossen ist, interessant. Dabei stellt sich die Frage, ob Abweichungen der Aushärtung schon direkt nach der Beschichtung, durch das Fluoreszenzmesssystem, detektiert und somit Fehlproduktionen schon frühzeitig erkennt werden können. [... aus Zusammenfassung und Ausblick]

Copolímeros casca-núcleo de poli(acrilato de butila) (núcleo) e poliestireno (casca) foram sintetizados por meio de polimerização em emulsão, conduzida em duas etapas. A adição de ácido itacônico como monômero funcional na polimerização do núcleo foi realizada para verificar seu efeito sobre suas propriedades mecânicas e de processamento. Os copolímeros foram caracterizados por espalhamento dinâmico de luz (DLS), microscopia eletrônica de transmissão (MET), cromatografia de exclusão por tamanho (SEC), espectrometria na região do infravermelho (FTIR) e calorimetria diferencial por varredura (DSC). A incorporação do monômero funcional foi confirmada por DSC e quantificada por titulação. A proporção de poli(acrilato de butila) e poliestireno influenciou diretamente o processamento e as propriedades mecânicas do polímero. Os copolímeros com teores de poliestireno acima de 50% foram processados por compressão e extrusão a temperatura ambiente, apresentando comportamento baroplástico. A presença do monômero funcional não alterou o processamento do polímero e melhorou significativamente sua resistência à tração, aumentando sua tenacidade / Core shell copolymers of poly(butyl acrylate) cores and polystyrene shells were synthesized in a two-stage emulsion polymerization. The addition of itaconic acid as functional monomer in the core polymerization was carried out in order to study its influence on polymer processing and mechanical properties. The copolymers were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The functional monomer incorporation was confirmed by DSC and quantified by titration. The poly(butyl acrylate) and polystyrene proportions had a direct influence on the polymer processing and mechanical properties. Copolymers with polystyrene contents higher than 50% presented baroplastic behavior and they could be processed at room temperature by compression molding and extrusion. The presence of itaconic acid did not affect polymer processing and significantly improved tensile resistance, increasing its toughness

Made available in DSpace on 2015-05-14T13:21:42Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 2308276 bytes, checksum: 30fe5bd9f0346db5777a9c5983218c0f (MD5) Previous issue date: 2014-08-29 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / Sulfites are chemical additives major role in the beverage industry, however, the excessive use of these additives can cause disease and its limit is a maximum of 0,7 mg/kg of body weight per day SO2. This study proposes a micro-batch-flow analyser (μFBA) for photometric determination of sulphites in beverages. The μFBA was built from the commercial urethane-acrylate resin and polymerized exhibiting photo of ultra-violet radiation. The photometric method for the determination of sulfites in beverages based on the reaction of salts of sulfites in an acid medium with formaldehyde solution subsequently reacted with pararosaniline hydrochloride solution giving finally, a complex of violet color with maximum absorption at 565 nm. The linear model of the calibration curve was validated by ANOVA, residual plot and left by the F test model. The detection limit was 0,08 mg L-1 and the relative standard deviation less than 1,5% (n = 3). A test precision assessed by recovery test (96,8% to 102,6%) was performed. The μFBA is potentially useful as an alternative to sulfites photometric determinations as parameters of quality of beverage and yield of 240 samples per hour, producing low consumption of sample and reagents. The results obtained by the proposed μFBA compared to the conventional method, no statistically significant differences in applying paired with a confidence level of 95% t-test / Os sulfitos são aditivos químicos com grande atuação na indústria de bebidas, entretanto o uso desses aditivos em excesso podem causar patologias e seu limite encontra-se no máximo de 0,7 mg/kg de SO2 peso corpóreo por dia. Esse estudo propõe um microanalisador em fluxo batelada (μFBA) para determinação fotométrica de sulfitos em bebidas. A microcâmara do μFBA foi construído a partir da resina comercial uretana-acrilato e polimerizado em fotoexpositora de radiação ultra-violeta. O método fotométrico para determinação de sulfitos em bebidas baseou-se na reação dos sais de sulfitos, em meio ácido, com solução de formaldeído que posteriormente reagiu com a solução de cloridrato de pararosanilina originando, por fim, um complexo de cor violeta com absorção máxima em 565 nm. O modelo linear da curva analítica foi validada através da ANOVA, gráfico dos resíduos e teste F deixados pelo modelo. O limite de detecção foi de 0.08 mg L-1 e o desvio padrão relativo inferior a 1,5% (n = 3). Foi realizado um teste de precisão avaliada através do teste de recuperação (96,8% a 102,6%). O μFBA é potencialmente útil como uma alternativa para determinações fotométricas de sulfitos como parâmetros de qualidade de bebidas e rendimento de 240 amostras por hora, gerando baixo consumo de amostra e reagentes. Os resultados obtidos pelo μFBA proposto comparado ao método convencional, não apresentou diferenças estatisticamente significativas na aplicação do teste t pareado com nível de confiança de 95%

This thesis is aimed at a very detailed process of a transparent plexiglass used for manufacturing an upstand of a gramophone. The diploma work is mainly focused on various types of the plexiglass, its attributes and the gramophone’s upstand production. Several manufacturing technologies of a plexiglass such as division of a board-type semi product, precise milling, grinding, polishing and thermal treatment are provided in this diploma work through a very detailed description of a production process of a gramophone’s deck. The outcome of this thesis is a description of individual technologies and the economic evaluation within the real business environment of AZ Plastik company.

Homopolymers and copolymers produced from aromatic based methacrylates, acrylates, and dimethacrylates are excellent materials with many applications in dentistry, microelectronics, and optics, including optical eye wear, fiber optics, and non-linear optics, such as holography. Carbazole based polymers have demonstrated good optical, photo-refractive, and charge-transporting properties, combined with ease of processing. The objective of this research was to design, synthesize, and characterize high refractive index polymers and copolymers for use in optical spectacle lenses of eyeglasses. Additionally, other interesting attributes were observed for selected carbazole based polymers, such as high thermal stability and birefringence, which could lend these materials to other uses, such as non-linear optics and electronic data storage. A family of novel, high refractive index homopolymers and copolymers were synthesized by incorporating carbazole, along with other aromatic substituents, into methacrylates, acrylates, and dimethacrylates. Subsequent free radical polymerizations provided for high refractive index materials well suited for lightweight optical spectacles and other applications. The refractive index of materials can be increased by increasing the polarizability of substituent groups. By incorporating oxygen, sulfur, or sulfoxide groups into polymers, high refractive index polymers have been attained. By reacting the phenol, aromatic diols, or aromatic thiols with 9-(2,3-epoxypropyl)-carbazole, the refractive index of the final polymer can be increased further. The reaction of the carbazole based intermediate with methacryloyl chloride or methacrylic anhydride eliminated any hydroxyl groups in the final methacrylate or dimethacrylate. Hydroxyl groups undergo intermolecular hydrogen bonding, which increases viscosity. The absence of hydrogen bonding in the final methacrylated monomers reduces viscosity, which is desirable for processing. Novel carbazole based monomers and polymers were characterized in terms of molecular composition and molecular weight, thermal properties, such as melting point, glass transition temperature, and decomposition, and in terms of optical properties, such as refractive index. The AIBN initiated carbazole-phenoxy based methacrylate polymerization was followed using in-situ FTIR, which showed the reaction to be completed within 40 minutes in DMAC at 90°C. Photo-DSC was used to determine the heat of polymerization (DHp) for the carbazole-phenoxy based methacrylate, which was found to be -39.4 kJ/mole. One and two dimensional 1H NMR was used to characterize the molecular structure of the carbazole-phenoxy based methacrylate monomer. The carbazole-phenoxy based methacrylate homopolymer had a surprisingly high decomposition temperature. 13C NMR spectroscopy experiments and molecular modeling were employed to explore the configuration of the polymerized carbazole-phenoxy based methacrylate. The lack of head-to-head linkages due to steric considerations could explain the higher thermal stability observed for the carbazole-phenoxy based methacrylate polymer. Refractive indices of these carbazole based methacrylates, acrylates, and dimethacrylate polymers ranged from 1.53 to 1.63. Statistical copolymers of carbazole based methacrylates with methyl methacrylate were also produced by solution polymerization in DMAC, and characterized. Using free radical polymerization techniques, homopolymers and copolymers of the carbazole functionalized methacrylates, acrylates, and dimethacrylates were readily obtained. This research demonstrated a variety of carbazole based chemistries which could produce controlled linear and cross-linked materials with high refractive index values and other interesting features. / Ph. D.

Es wird gezeigt, dass mit dem Fluoreszenzmesssystem sowohl die Schichtdicke als auch die Aushärtung detektiert werden kann. Durch das Erstellen von Eichkurven ist es so möglich, vollflächig, die genaue Schichtdicke der Beschichtung im laufenden Prozess inline zu bestimmen und Abweichungen in Echtzeit entgegenzuwirken. Zudem können so Unregelmäßigkeiten bei der Aushärtung der Lacke direkt erkannt und bei unzureichender Aushärtung der Anteil von Fehlproduktionen minimiert werden. Auch bei hochvernetzten Acrylatklebstoffen konnte gezeigt werden, dass mit dem System eine genaue Analyse der inneren Festigkeit vorgenommen werden kann. Diese Klebstoffe, mit teilweise unterschiedlichem chemischen Aufbau, aber gleichem E-Modul, emittieren dasselbe Maß an Fluoreszenz. Somit konnte gezeigt werden, dass mit der Fluoreszenzmessung, unabhängig von der chemischen Struktur, gleichbleibende Intensitäten gemessen und damit der Aushärtegrad bestimmt werden kann. Zur genauen Bestimmung der Schichtdicken mit dem Fluoreszenzmesssystem ist es notwendig genaue Eichkurven für jedes einzelne System zu erstellen. Auch ist es, im Falle der Molkeprotein Beschichtungen notwendig weitere Formulierungen zu testen um eine exakte Vorhersage des Vernetzungsgrads zu gewährleisten. Durch die Ergebnisse die mit den Acrylatklebstoffen erzielt wurden stellt sich die Frage, inwieweit eine Korrelation zwischen der chemischen Struktur des untersuchten Materials und der gemessenen Fluoreszenz dabei besteht. Es sollte die Fluoreszenz von weiteren Materialien, unterschiedlicher chemischer Struktur, gemessen und überprüft werden, ob ein Zusammenhang zu deren E-Modul besteht. Außerdem sind Materialien wie z.B. Klebstoffe und Lacke auf Polyurethanbasis, deren Aushärtung erst nach mehreren Tagen oder Wochen abgeschlossen ist, interessant. Dabei stellt sich die Frage, ob Abweichungen der Aushärtung schon direkt nach der Beschichtung, durch das Fluoreszenzmesssystem, detektiert und somit Fehlproduktionen schon frühzeitig erkennt werden können. [... aus Zusammenfassung und Ausblick]

No description available.

Tesis por compendio / [EN] The development of new and more complex polymeric materials involves challenging problems to basic sciences. The relationship between structure and molecular dynamics assumes great importance for the future development of novel technologies based on such polymers. Thus, the understanding of how small changes in the chemical structure affect the properties of the material is essential to progress in the technological and scientific area. An in-depth analysis of the molecular mobility leads to establish the structure-properties relationships. On this basis, the main aim of the present work is to study the molecular mobility of two different families of polymeric materials. For this purpose, the experimental techniques mainly used were Differential Scanning Calorimetry (DSC) and Dielectric Relaxation Spectroscopy (DRS). The first family of polymers characterized was a series of chemically cross-linked copolymers composed by Vinylpyrrolidone (VP) and Butyl Acrylate (BA) monomers. In the first place, the influence of the monomer molar ratio (XVP/YBA) on the copolymer properties was studied. Thus, a Fourier Transform Infrared Spectroscopy (FTIR) analysis verified dipole-dipole interactions between amide groups. The influence of these interactions on several parameters related to the molecular mobility was evidenced by the DSC, DRS and Dynamic Mechanical Analysis (DMA) techniques. Secondly, the effect of the cross-link density on the molecular dynamics of 60VP/40BA copolymers was analyzed using DSC and DRS. One single glass transition was detected by DSC measurements. The DRS analysis showed that an increase of the cross-linking produced a typical effect on the alpha process dynamics. However, the beta process, which possessed typical features of pure JG relaxation, unexpectedly lost the intermolecular character for the highest cross-linker content. The fastest gamma process was relatively unaffected. The second family of polymeric materials studied was a series of segmented polycarbonatediol polyurethane (PUPH) modified with different amounts of expanded graphite (EG) conductive filler. Scanning Electron Microscopy (SEM), X-ray diffraction measurements and FTIR analysis demonstrated a homogeneous dispersion of the EG filler in the matrix. DRS was used to study the dielectric properties of the PUPH/EG composites. The dielectric permittivity of the composites showed an insulator to conductor percolation transition with the increase of the EG content (2030 wt%). The addition of expanded graphite to the matrix caused a dramatic increase in the electrical conductivity of ten orders of magnitude, which is an indication of percolative behavior. / [ES] El desarrollo de nuevos materiales poliméricos de mayor complejidad produce un desafío cada vez mayor en el área de las ciencias básicas. La relación entre la estructura y la dinámica molecular resulta de gran importancia para el desarrollo de nuevas tecnologías basadas en estos materiales poliméricos. Así, una mayor comprensión de cómo pequeños cambios en la estructura química afectan a las propiedades de los materiales resulta esencial para el progreso científico y tecnológico. Un análisis en profundidad de la movilidad molecular permite establecer las relaciones estructura-propiedades. Partiendo de esta base, el principal objetivo del presente trabajo es el estudio de la movilidad molecular de dos familias diferentes de materiales poliméricos. Para ello, las técnicas experimentales utilizadas fueron principalmente la Calorimetría Diferencial de Barrido (DSC) y la Espectroscopia de Relajación Dieléctrica (DRS). La primera familia de polímeros caracterizada fue una serie de copolímeros entrecruzados químicamente compuestos por los monómeros Vinilpirrolidona (VP) y Acrilato de Butilo (BA). En primer lugar, se estudió la influencia de la proporción molar de monómero (XVP/YBA) en las propiedades del copolímero. A través de un análisis por Espectroscopia de Infrarrojo por Transformada de Fourier (FTIR), se verificó la existencia de interacciones dipolo-dipolo entre los grupos amida. Mediante el análisis por DSC, DRS y Análisis Dinamomecánico (DMA), se evidenció la influencia de estas interacciones en diferentes parámetros relacionados con la movilidad molecular. En segundo lugar, se analizó el efecto de la densidad de entrecruzamiento en la dinámica molecular de los copolímeros 60VP/40BA usando DSC y DRS. A través de las medidas de DSC se observó una única transición vítrea para todos los entrecruzamientos. El análisis por DRS mostró como el incremento en entrecruzante produjo el típico efecto en la dinámica del proceso alpha, pero sin embargo, el proceso beta, que tenía las características típicas de una relajación JG, perdió de forma inesperada su carácter intermolecular para el mayor contenido en entrecruzante. El proceso gamma no se vio afectado. La segunda familia de materiales poliméricos estudiada fue una serie de poliuretanos segmentados (PUPH) modificados con diferentes cantidades de grafito expandido (EG), utilizado como relleno conductivo (desde 0 a 50% en peso). El análisis de los resultados obtenidos mediante Microscopía Electrónica de Barrido (SEM), Difracción de Rayos X y FTIR demostró la homogénea dispersión del relleno de EG en la matriz de PUPH. La técnica DRS se usó para estudiar las propiedades dieléctricas de los materiales compuestos PUPH/EG. La permitividad dieléctrica de los materiales mostró una transición de percolación desde aislante a conductor al incrementarse el contenido en EG (rango de 20-30% en peso). La adición de grafito expandido a la matriz de PUPH causó un incremento significativo en la conductividad dieléctrica de diez órdenes de magnitud, lo que indica el comportamiento de percolación. / [CA] El desenvolupament de nous materials polimèrics de major complexitat produeix un desafiament cada vegada major en l'àrea de les ciències bàsiques. La relació entre l'estructura i la dinàmica molecular resulta de gran importància per al desenrotllament de noves tecnologies basades en aquests materials polimèrics. Així, una major comprensió de com petits canvis en l'estructura química afecten a les propietats dels materials, resulta essencial per al progrés científic i tecnològic. Un anàlisis en profunditat de la mobilitat molecular permet establir les relacions estructura-propietats. Partint d'aquesta base, el principal objectiu del present treball és l'estudi de la mobilitat molecular de dues famílies diferents de materials polimèrics. Per a això, les tècniques experimentals utilitzades van ser principalment la Calorimetria Diferencial de Rastreig (DSC) i l'Espectroscòpia de Relaxació Dielèctrica (DRS). La primera família de polímers caracteritzada va ser una sèrie de copolímers entrecreuats químicament compostos pels monòmers Vinilpirrolidona (VP) i Acrilat de Butilo (BA) . En primer lloc, es va estudiar la influència de la proporció molar de monòmer (XVP/YBA) en les propietats del copolímer. A través d'una anàlisi per Espectroscòpia d'Infraroig per Transformada de Fourier (FTIR), es va verificar l'existència d'interaccions dipol-dipol entre els grups amida. Mitjançant l'anàlisi per DSC, DRS i Anàlisi Dinamomecánico (DMA), es va evidenciar la influència d'aquestes interaccions en diferents paràmetres relacionats amb la mobilitat molecular. En segon lloc, es va analitzar l'efecte de la densitat d'entrecreuament en la dinàmica molecular dels copolímers 60VP/40BA mitjançant DSC i DRS. A través de les mesures de DSC es va observar una única transició vítria per a tots els continguts d'agent entrecreuant . L'anàlisi per DRS va mostrar com l'increment en agent entrecreuant va produir l'efecte esperat en la dinàmica del procés alfa. En canvi, el procés beta, que tenia les característiques típiques d'una relaxació JG, va perdre de forma inesperada el seu caràcter intermolecular per al major contingut en agent entrecreuant. El procés més ràpid gamma no es va veure afectat. La segona família de materials polimèrics estudiada va ser una sèrie de poliuretans segmentats (PUPH) modificats amb diferents quantitats de grafit expandit (EG) , utilitzat com a farcit conductiu (des de 0 a 50% en pes). L'anàlisi dels resultats obtinguts per mitjà de Microscòpia Electrònica de Rastreig (SEM), Difracció de Rajos X i FTIR va mostrar la dispersió homogènia del EG en la matriu de PUPH. La tècnica DRS es va utilitzar per a estudiar les propietats dielèctriques dels materials compostos PUPH/EG. La permitivitat dielèctrica dels materials va mostrar una transició de percolació des d'aïllant a conductor amb l'increment de contingut en EG (20-30% en pes). L'addició d'EG a la matriu de PUPH va causar un increment significatiu en la conductivitat dielèctrica, de deu ordes de magnitud. / Redondo Foj, MB. (2015). A contribution to the study of the molecular mobility in polymeric materials by Thermal and Dielectric Analysis [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/59457 / Compendio

No description available.