Spelling suggestions: "subject:"adaptive meshrefinement"" "subject:"adaptive resultrefinement""
41 |
Incompressible Flow Simulations Using Least Squares Spectral Element Method On Adaptively Refined Triangular GridsAkdag, Osman 01 September 2012 (has links) (PDF)
The main purpose of this study is to develop a flow solver that employs triangular grids to solve two-dimensional, viscous, laminar, steady, incompressible flows. The flow solver is based on Least Squares Spectral Element Method (LSSEM). It has p-type adaptive mesh refinement/coarsening capability and supports p-type nonconforming element interfaces. To validate the developed flow solver several benchmark problems are studied and successful results are obtained. The performances of two different triangular nodal distributions, namely Lobatto distribution and Fekete distribution, are compared in terms of accuracy and implementation complexity. Accuracies provided by triangular and quadrilateral grids of equal computational size are compared. Adaptive mesh refinement studies are conducted using three different error indicators, including a novel one based on elemental mass loss. Effect of modifying the least-squares functional by multiplying the continuity equation by a weight factor is investigated in regards to mass conservation.
|
42 |
Least-squares Finite Element Solution Of Euler Equations With Adaptive Mesh RefinementAkargun, Yigit Hayri 01 February 2012 (has links) (PDF)
Least-squares finite element method (LSFEM) is employed to simulate 2-D and axisymmetric flows governed by the compressible Euler equations. Least-squares formulation brings many advantages over classical Galerkin finite element methods. For non-self-adjoint systems, LSFEM result in symmetric positive-definite matrices which can be solved efficiently by iterative methods. Additionally, with a unified formulation it can work in all flight regimes from subsonic to supersonic. Another advantage is that, the method does not require artificial viscosity since it is naturally diffusive which also appears as a difficulty for sharply resolving high gradients in the flow field such as shock waves. This problem is dealt by employing adaptive mesh refinement (AMR) on triangular meshes. LSFEM with AMR technique is numerically tested with various flow problems and good agreement with the available data in literature is seen.
|
43 |
Coupled flow systems, adjoint techniques and uncertainty quantificationGarg, Vikram Vinod, 1985- 25 October 2012 (has links)
Coupled systems are ubiquitous in modern engineering and science. Such systems can encompass fluid dynamics, structural mechanics, chemical species transport and electrostatic effects among other components, all of which can be coupled in many different ways. In addition, such models are usually multiscale, making their numerical simulation challenging, and necessitating the use of adaptive modeling techniques. The multiscale, multiphysics models of electrosomotic flow (EOF) constitute a particularly challenging coupled flow system. A special feature of such models is that the coupling between the electric physics and hydrodynamics is via the boundary. Numerical simulations of coupled systems are typically targeted towards specific Quantities of Interest (QoIs). Adjoint-based approaches offer the possibility of QoI targeted adaptive mesh refinement and efficient parameter sensitivity analysis. The formulation of appropriate adjoint problems for EOF models is particularly challenging, due to the coupling of physics via the boundary as opposed to the interior of the domain. The well-posedness of the adjoint problem for such models is also non-trivial. One contribution of this dissertation is the derivation of an appropriate adjoint problem for slip EOF models, and the development of penalty-based, adjoint-consistent variational formulations of these models. We demonstrate the use of these formulations in the simulation of EOF flows in straight and T-shaped microchannels, in conjunction with goal-oriented mesh refinement and adjoint sensitivity analysis. Complex computational models may exhibit uncertain behavior due to various reasons, ranging from uncertainty in experimentally measured model parameters to imperfections in device geometry. The last decade has seen a growing interest in the field of Uncertainty Quantification (UQ), which seeks to determine the effect of input uncertainties on the system QoIs. Monte Carlo methods remain a popular computational approach for UQ due to their ease of use and "embarassingly parallel" nature. However, a major drawback of such methods is their slow convergence rate. The second contribution of this work is the introduction of a new Monte Carlo method which utilizes local sensitivity information to build accurate surrogate models. This new method, called the Local Sensitivity Derivative Enhanced Monte Carlo (LSDEMC) method can converge at a faster rate than plain Monte Carlo, especially for problems with a low to moderate number of uncertain parameters. Adjoint-based sensitivity analysis methods enable the computation of sensitivity derivatives at virtually no extra cost after the forward solve. Thus, the LSDEMC method, in conjuction with adjoint sensitivity derivative techniques can offer a robust and efficient alternative for UQ of complex systems. The efficiency of Monte Carlo methods can be further enhanced by using stratified sampling schemes such as Latin Hypercube Sampling (LHS). However, the non-incremental nature of LHS has been identified as one of the main obstacles in its application to certain classes of complex physical systems. Current incremental LHS strategies restrict the user to at least doubling the size of an existing LHS set to retain the convergence properties of LHS. The third contribution of this research is the development of a new Hierachical LHS algorithm, that creates designs which can be used to perform LHS studies in a more flexibly incremental setting, taking a step towards adaptive LHS methods. / text
|
44 |
Parallel Anisotropic Block-based Adaptive Mesh Refinement Algorithm For Three-dimensional FlowsWilliamschen, Michael 11 December 2013 (has links)
A three-dimensional, parallel, anisotropic, block-based, adaptive mesh refinement (AMR) algorithm is proposed and described for the
solution of fluid flows on body-fitted, multi-block, hexahedral meshes. Refinement and de-refinement in any grid block computational direction, or combination of directions, allows the mesh to rapidly adapt to anisotropic flow features such as shocks, boundary layers, or flame fronts, common to complex flow physics. Anisotropic refinements and an efficient and highly scalable parallel implementation lead to a potential for significant reduction in computational cost as compared to a more typical isotropic approach. Unstructured root-block topology allows for greater flexibility in the treatment of complex geometries. The AMR algorithm is coupled with an upwind finite-volume scheme for the solution of the Euler equations governing inviscid, compressible, gaseous flow. Steady-state and time varying, three-dimensional, flow problems are investigated for various geometries, including the cubed-sphere mesh.
|
45 |
Parallel Anisotropic Block-based Adaptive Mesh Refinement Algorithm For Three-dimensional FlowsWilliamschen, Michael 11 December 2013 (has links)
A three-dimensional, parallel, anisotropic, block-based, adaptive mesh refinement (AMR) algorithm is proposed and described for the
solution of fluid flows on body-fitted, multi-block, hexahedral meshes. Refinement and de-refinement in any grid block computational direction, or combination of directions, allows the mesh to rapidly adapt to anisotropic flow features such as shocks, boundary layers, or flame fronts, common to complex flow physics. Anisotropic refinements and an efficient and highly scalable parallel implementation lead to a potential for significant reduction in computational cost as compared to a more typical isotropic approach. Unstructured root-block topology allows for greater flexibility in the treatment of complex geometries. The AMR algorithm is coupled with an upwind finite-volume scheme for the solution of the Euler equations governing inviscid, compressible, gaseous flow. Steady-state and time varying, three-dimensional, flow problems are investigated for various geometries, including the cubed-sphere mesh.
|
46 |
Simulation de l'atomisation d'une goutte par un écoulement à grande vitesse / Simulation of the atomization of a droplet by a high-speed flowSchmidmayer, Kevin 12 October 2017 (has links)
Depuis le début du millénaire, la simulation numérique directe est apparue comme un outil précieux capable d'étudier l’atomisation d’une goutte isolée par un écoulement à grande vitesse. L’atomisation peut être divisée en deux phases distinctes : l'éclatement se produit d'abord sous la forme d'aplatissement de la goutte, formant également des filaments, puis il se poursuit via l'obtention d'une multitude de gouttes de tailles réduites ce qui complète le processus d’atomisation. Les principaux objectifs pour le présent travail étaient donc d’établir un modèle et une méthode numérique capables d’étudier au mieux ces phénomènes. L'atomisation d’une goutte isolée est présentée et est accompagnée d’une comparaison avec l’expérience qui confirme les capacités du modèle et de la méthode à simuler numériquement les différents processus physiques mis en jeu. Des informations essentielles quant aux mécanismes d’atomisation, non exploitables avec l’expérience, sont décrites et l’objectif d’obtenir des gouttes de tailles réduites est atteint. / Only at the beginning of the millennium, direct numerical simulation has emerged as a valuable tool capable of studying the atomization of an isolated droplet by a high-speed flow. The atomization can be divided into two distinct phases: the aerobreakup occurs first in the form of flattening of the droplet, also forming filaments, and then it continues via the obtaining of a multitude of reduced sizes droplets what completes the process of atomization. The main objectives of this work were therefore to establish a model and a numerical method able to study these phenomena as well as possible. The atomization of an isolated droplet is presented and is accompanied by a comparison with the experiment which confirms the capacities of the model and the method to numerically simulate the different physical processes involved. Essential information on atomization mechanisms, which cannot be exploited with experiments, is described and the objective of obtaining droplets of reduced sizes is achieved.
|
47 |
Direct Numerical Simulation of bubbles with Adaptive Mesh Refinement with Distributed Algorithms / Simulation numérique directe de bulles sur maillage adaptatif avec algorithmes distribuésTalpaert, Arthur 24 February 2017 (has links)
Ce travail de thèse présente l'implémentation de la simulation d'écoulements diphasiques dans des conditions de réacteurs nucléaires à caloporteur eau, à l'échelle de bulles individuelles. Pour ce faire, nous étudions plusieurs modèles d'écoulements thermohydrauliques et nous focalisons sur une technique de capture d'interface mince entre phases liquide et vapeur. Nous passons ainsi en revue quelques techniques possibles de maillage adaptatif (AMR) et nous fournissons des outils algorithmiques et informatiques adaptés à l'AMR par patchs dont l'objectif localement la précision dans des régions d'intérêt. Plus précisément, nous introduisons un algorithme de génération de patchs conçu dans l'optique du calcul parallèle équilibré. Cette approche nous permet de capturer finement des changements situés à l'interface, comme nous le montrons pour des cas tests d'advection ainsi que pour des modèles avec couplage hyperbolique-elliptique. Les calculs que nous présentons incluent également la simulation du système de Navier-Stokes incompressible qui modélise la déformation de l'interface entre deux fluides non-miscibles. / This PhD work presents the implementation of the simulation of two-phase flows in conditions of water-cooled nuclear reactors, at the scale of individual bubbles. To achieve that, we study several models for Thermal-Hydraulic flows and we focus on a technique for the capture of the thin interface between liquid and vapour phases. We thus review some possible techniques for Adaptive Mesh Refinement (AMR) and provide algorithmic and computational tools adapted to patch-based AMR, which aim is to locally improve the precision in regions of interest. More precisely, we introduce a patch-covering algorithm designed with balanced parallel computing in mind. This approach lets us finely capture changes located at the interface, as we show for advection test cases as well as for models with hyperbolic-elliptic coupling. The computations we present also include the simulation of the incompressible Navier-Stokes system, which models the shape changes of the interface between two non-miscible fluids.
|
48 |
A Graphics Processing Unit Based Discontinuous Galerkin Wave Equation Solver with hp-Adaptivity and Load BalancingTousignant, Guillaume 13 January 2023 (has links)
In computational fluid dynamics, we often need to solve complex problems with high precision and efficiency. We propose a three-pronged approach to attain this goal. First, we use the discontinuous Galerkin spectral element method (DG-SEM) for its high accuracy. Second, we use graphics processing units (GPUs) to perform our computations to exploit available parallel computing power. Third, we implement a parallel adaptive mesh refinement (AMR) algorithm to efficiently use our computing power where it is most needed. We present a GPU DG-SEM solver with AMR and dynamic load balancing for the 2D wave equation. The DG-SEM is a higher-order method that splits a domain into elements and represents the solution within these elements as a truncated series of orthogonal polynomials. This approach combines the geometric flexibility of finite-element methods with the exponential convergence of spectral methods. GPUs provide a massively parallel architecture, achieving a higher throughput than traditional CPUs. They are relatively new as a platform in the scientific community, therefore most algorithms need to be adapted to that new architecture. We perform most of our computations in parallel on multiple GPUs. AMR selectively refines elements in the domain where the error is estimated to be higher than a prescribed tolerance, via two mechanisms: p-refinement increases the polynomial order within elements, and h-refinement splits elements into several smaller ones. This provides a higher accuracy in important flow regions and increases capabilities of modeling complex flows, while saving computing power in other parts of the domain. We use the mortar element method to retain the exponential convergence of high-order methods at the non-conforming interfaces created by AMR. We implement a parallel dynamic load balancing algorithm to even out the load imbalance caused by solving problems in parallel over multiple GPUs with AMR. We implement a space-filling curve-based repartitioning algorithm which ensures good locality and small interfaces. While the intense calculations of the high order approach suit the GPU architecture, programming of the highly dynamic adaptive algorithm on GPUs is the most challenging aspect of this work. The resulting solver is tested on up to 64 GPUs on HPC platforms, where it shows good strong and weak scaling characteristics. Several example problems of increasing complexity are performed, showing a reduction in computation time of up to 3× on GPUs vs CPUs, depending on the loading of the GPUs and other user-defined choices of parameters. AMR is shown to improve computation times by an order of magnitude or more.
|
49 |
Numerical investigation of field-scale convective mixing processes in heterogeneous, variable-density flow systems using high-resolution adaptive mesh refinement methodsCosler, Douglas Jay 14 July 2006 (has links)
No description available.
|
50 |
[pt] OTIMIZAÇÃO TOPOLÓGICA COM REFINAMENTO ADAPTATIVO DE MALHAS POLIGONAIS / [en] TOPOLOGY OPTIMIZATION WITH ADAPTIVE POLYGONAL MESH REFINEMENTTHOMÁS YOITI SASAKI HOSHINA 03 November 2016 (has links)
[pt] A otimização topológica tem como objetivo encontrar a distribuição mais
eficiente de material (ótima topologia) em uma determinada região, satisfazendo
as restrições de projeto estabelecidas pelo usuário. Na abordagem
tradicional atribui-se uma variável de projeto, constante, denominada densidade,
para cada elemento finito da malha. Dessa forma, a qualidade da representação
dos novos contornos da estrutura depende do nível de discretização
da malha: quanto maior a quantidade de elementos, mais bem definida
será a topologia da estrutura otimizada. No entanto, a utilização de malhas
super-refinadas implica em um elevado custo computacional, principalmente
na etapa de solução numérica das equações de equilíbrio pelo método dos elementos
finitos. Este trabalho propõe uma nova estratégia computacional para
o refinamento adaptativo local de malhas utilizando elementos finitos poligonais
em domínios bidimensionais arbitrários. A ideia consiste em realizar um
refinamento da malha nas regiões de concentração de material, sobretudo nos
contornos internos e externos, e um desrefinamento nas regiões de baixa concentração
de material, como por exemplo, nos furos internos. Desta forma, é
possível obter topologias ótimas, com alta resolução e relativamente baixo custo
computacional. Exemplos representativos são apresentados para demonstrar a
robustez e a eficiência da metodologia proposta por meio de comparações com
resultados obtidos com malhas super-refinadas e mantidas constantes durante
todo o processo de otimização topológica. / [en] Topology optimization aims to find the most efficient distribution of
material (optimal topology) in a given domain, subjected to design constraints
defined by the user. The quality of the new boundary representation depends
on the level of mesh refinement: the greater the number of elements in the mesh,
the better will be the representation of the optimized structure. However, the
use of super refined meshes implies in a high computational cost, especially
regarding the numerical solution of the linear systems of equations that arise
from the finite element method. This work proposes a new computational
strategy for adaptive local mesh refinement using polygonal finite elements in
arbitrary two-dimensional domains. The idea is to perform a mesh refinement
in regions of material concentration, mostly in inner and outer boundaries,
and a mesh derefinement in regions of low material concentration such as
the internal holes. Thus, it is possible to obtain optimal topologies with high
resolution and relatively low computational cost. Representative examples
are presented to demonstrate the robustness and efficiency of the proposed
methodology by comparing the results obtained herein with the ones from the
literature where super refined meshes are held constant throughout all topology
optimization process.
|
Page generated in 0.0949 seconds