Les futurs systèmes de radiocommunications devront proposer des services nécessitant des transferts de données à haut débit, tout en garantissant une grande mobilité aux utilisateurs. Pour y parvenir, de nouvelles techniques de traitement de signal doivent être mises en oeuvre. Une de ces approches constituant actuellement un axe important de la recherche dans ce domaine est la technique MC-CDMA. Cette dernière repose sur la combinaison de deux techniques : les modulations à porteuses multiples et l'étalement de spectre. Les travaux de recherche présentés dans cette thèse ont pour buts l'étude et l'optimisation des systèmes de communications mettant en oeuvre cette technique MC-CDMA.<br /><br />Après une présentation générale des différentes façons de combiner les techniques de modulations à porteuses multiples et d'étalement de spectre, les performances des systèmes MC-CDMA sont présentées sur des canaux de Rayleigh et BRAN dans le cas de détection mono-utilisateur et multi-utilisateur.<br /><br />Puis, l'influence des codes d'étalement sur la variation de la dynamique de l'enveloppe du signal émis, et sur l'interférence produite par la cohabitation des données de plusieurs utilisateurs sur les mêmes ressources fréquentielles et temporelles est étudiée. Pour cela, nous nous sommes intéressés aux variations de l'enveloppe des sisgnaux MC-CDMA à travers l'étude du facteur de crête et du facteur de crête global. Ces quantités permettent d'estimer les fluctuations du signal transmis respectivement en voie montante et descendante. En ce qui concerne la minimisation de l'interférence d'accès multiple, une technique reposant sur l'allocation des séquences d'étalement est décrite et plusieurs critères de sélection des codes d'étalement sont proposés.<br /><br />Enfin, une attention particulière est portée à l'optimisation de la voie montante des systèmes MC-CDMA. Afin d'éviter l'insertion de Nu jeux de sous-porteuses pilotes servant à estimer les Nu canaux de la voie montante, une solution reposant sur le principe de la réciprocité du canal radiomobile est ici proposée. Cette alternative consiste à effectuer une prédistorsion du signal utile dans le terminal avant son émission. Deux variantes sont envisagées, la première repose sur un multiplexage temporel des voies montante et descendante alors que la seconde repose sur un multiplexage fréquentiel de ces deux voies.

Orthogonal frequency division multiplexing (OFDM) systems with cyclic prefix (CP) can be used to protect signal from the time-variant multipath channel induced distortions. However, the presence of CP could greatly decrease the effective data rate, thus many recent research works have been focused on the multiple-input multiple-output (MIMO) OFDM systems without CP (CP-free), equipped with the space-time block codes (ST-BC). The constraint of the conventional MIMO-OFDM (without using the ST-BC) system is that the number of receive-antenna has to be greater than the transmit-antenna. In this thesis, we first consider the ST-BC MIMO-OFDM system and show that the above-mentioned constraint can be removed, such that the condition become that the receive antenna should be greater than one, that is the basic requirement for MIMO system. It is particular useful and confirm to the recently specification, e.g., 3GPP LTE (Long Term Evolution) where the system deploy the 2¡Ñ2 or 4¡Ñ4 antennas systems. This thesis also considers the effects of peak-to-average power ratio (PAPR) in the transmitter and In-phase/ Quadrature-phase (IQ) imbalance in the receiver, and solves them by using the adaptive Volterra predistorter and blind adaptive filtering approach of the nonlinear parameters estimation and compensation, along with the power measurement, respectively. After the compensator of IQ imbalance in the receiver, an equalizer under the framework of generalized sidelobe canceller (GSC) is derived for interference suppression. To further reduce the complexity of receiver implementation, the partially adaptive (PA) scheme is applied by exploiting the structural information of the signal and interference signature matrices. As demonstrated from computer simulation results, the performance of the proposed CP-free ST-BC MIMO-OFDM receiver is very similar to that obtained by the conventional CP-based ST-BC MIMO-OFDM system under either the predistortion or compensation scenario.

Selected mapping (SLM) is a well-known technique used to reduce the peak-to-average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) systems. Although SLM scheme can reduce PAPR efficiently, the side information (SI) must be transmitted to the receiver to indicate the candidate signal that generates the OFDM signal with the lowest PAPR. Robust channel coding schemes are typically adopted to prevent erroneous decoding of SI, leading to the lower bandwidth efficiency. To reduce PAPR efficiently and avoid the bandwidth efficiency loss caused by the transmission of SI, two novel PAPR reduction methods are proposed in SFBC MIMO-OFDM systems with two transmitter antennas that employs the Alamouti coding. The candidate signals are constructed in the frequency-domain and time-domain in the first proposed scheme and the second proposed scheme, respectively. In addition, the orthogonality of the space frequency block code is preserved resulting in the data recovery and the corresponding SI can be easily obtained from the conventional Alamouti detection method for both transmission methods. Simulation results show that the BER performance of a SFBC MIMO-OFDM system with the proposed SI detection algorithm is very close to that of perfect SI detection if the extension factor is larger than 1.3.

In multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) system which was used space frequency block coding (SFBC) method. It order to reduce the peak-to-average power ratio in several transmit antennas. We proposed two new architectures to simply the computational complexity on transmitter. According to the characteristics of SFBC structure which have M transmitter antennas. We can decomposed the interleaving subcarrier groups by used conversion vector to circular convolution with signal vector and shrink the inverse fast Fourier transform (IFFT) points. Therefore it can do the SFBC coding operation in time domain. By using combination of different cyclic shifts and phase rotations in U subcarrier groups can generate the P candidate signals. And it wouldn¡¦t increase the number of IFFT. The proposed transmitter architectures can improve the major drawback of high computational complexity in traditional selected mapping (SLM). The traditional SLM generate the P candidate signals needs MP IFFT units. Then in the condition of lose a little PAPR reduction performance, we can save the most of computational complexity.

Includes vita. / Title from PDF of title page. / Document formatted into pages; contains 289 pages. / Thesis (Ph.D.)--University of South Florida, 2003. / Includes bibliographical references. / Text (Electronic thesis) in PDF format. / ABSTRACT: The proliferation of portable systems and mobile computing platforms has increased the need for the design of low power consuming integrated circuits. The increase in chip density and clock frequencies due to technology advances has made low power design a critical issue. Low power design is further driven by several other factors such as thermal considerations and environmental concerns. In low-power design for battery driven portable applications, the reduction of peak power, peak power differential, average power and energy are equally important. In this dissertation, we propose a framework for the reduction of these parameters through datapath scheduling at behavioral level. Several ILP based and heuristic based scheduling schemes are developed for datapath synthesis assuming : (i) single supply voltage and single frequency (SVSF), (ii) multiple supply voltages and dynamic frequency clocking (MVDFC), and (iii) multiple supply voltages and multicycling (MVMC). / ABSTRACT: The scheduling schemes attempt to minimize : (i) energy, (ii) energy delay product, (iii) peak power, (iv) simultaneous peak power and average power, (v) simultaneous peak power, average power, peak power differential and energy, and (vi) power fluctuation. A new parameter called "Cycle Power Function" CPF) is defined which captures the transient power characteristics as the equally weighted sum of normalized mean cycle power and normalized mean cycle differential power. Minimizing this parameter using multiple supply voltages and dynamic frequency clocking results in the reduction of both energy and transient power. The cycle differential power can be modeled as either the absolute deviation from the average power or as the cycle-to-cycle power gradient. The switching activity information is obtained from behavioral simulations. Power fluctuation is modeled as the cycle-to-cycle power gradient and to reduce fluctuation the mean power gradient MPG is minimized. / ABSTRACT: The power models take into consideration the effect of switching activity on the power consumption of the functional units. Experimental results for selected high-level synthesis benchmark circuits under different constraints indicate that significant reductions in power, energy and energy delay product can be obtained and that the MVDFC and MVMC schemes yield better power reduction compared to the SVSF scheme. Several application specific VLSI circuits were designed and implemented for digital watermarking of images. Digital watermarking is the process that embeds data called a watermark into a multimedia object such that the watermark can be detected or extracted later to make an assertion about the object. / ABSTRACT: A class of VLSI architectures were proposed for various watermarking algorithms : (i) spatial domain invisible-robust watermarking scheme, (ii) spatial domain invisible-fragile watermarking scheme, (iii) spatial domain visible watermarking scheme, (iv) DCT domain invisible-robust watermarking scheme, and (v) DCT domain visible watermarking scheme. Prototype implementation of (i), (ii) and (iii) are given. The hardware modules can be incorporated in a "JPEG encoder" or in a "digital still camera". / System requirements: World Wide Web browser and PDF reader. / Mode of access: World Wide Web.

Orthogonal Frequency Division Multiplexing (OFDM) and Single Carrier Block Transmissions (SCBT) are located at the two opposite edges of block transmission concept. In this thesis a system which lies between OFDM and SCBT is proposed. The new system, namely Block Transmissions on Orthogonal Carriers (BTOC), can be considered as a hybrid form of OFDM and SCBT. BTOC system is investigated under the redundant filterbank precoders and equalizers framework. Peak to average power ratio (PAPR) of BTOC is formulated and compared with the PAPRs of OFDM and SCBT. Effect of frequency offset for BTOC is investigated and comparison between OFDM, SCBT, and BTOC is presented. Simulation results of Zero Padded OFDM (ZP-OFDM), SCBT, and BTOC are included.

Distortion-based crest factor reduction (CFR) algorithms were studied in orthogonal frequency division multiplexing (OFDM) and multiple-input multiple-output (MIMO) OFDM systems to reduce the nonlinear distortion and improve the power efficiency of the transmitter front-end. First, definitions of peak-to-average-power ratio (PAR) were clarified based on the power efficiency improvement consideration in the MIMO-OFDM systems. Next, error vector magnitude (EVM) was used as the in-band performance-evaluating metric. Statistical analysis of EVM was performed to provide concrete thresholds for the amount of allowable distortions from each source to meet EVM requirements in the standard. Furthermore, an effective CFR technique, constrained clipping, was proposed to drastically reduce the PAR while satisfying any given in-band EVM and out-of-band spectral mask constraints. Constrained clipping has low computational complexity and can be easily extended to the multiple-user OFDM environment. Finally, signal-to-noise-and-distortion ratio (SNDR) analysis for transceiver nonlinearities in the additive white Gaussian noise channel was investigated. An analytical solution was presented for maximizing the transceiver SNDR for any given set of nonlinear transmitter polynomial coefficients. Additionally, mutually inverse pair of transceiver nonlinearities was shown to be SNDR-optimal only in the noise-free case.

L’imagerie effectuée avec des rayons X est largement utilisée de nos jours dans de nombreuses disciplines telles que la physique du solide, les sciences du vivant et la médecine. Les sources de rayons X basées sur la diffusion Thomson d’un faisceau laser par des paquets d’électrons permettent d’obtenir des faisceaux de bonnes qualités pour un faible coût et un faible encombrement. Plusieurs instituts de recherche académiques se sont récemment lancés dans la construction de telles sources qui sont constituées d’un anneau des stockage d’électrons et d’un résonateur optique. Le résonateur optique permet de stocker des impulsions laser focalisées au point d’interaction laser-électron à des fréquences de plusieurs dizaines de méga Hertz. Des flux de rayons X dépassants 10^{11} ph/s peuvent ainsi être obtenus. Dans ce travail de thèse un modèle de stockage d’impulsion a été développé. Ce modèle prend en compte les effets de la phase CEP (carrier-envelope phase) et des décalages temporels permettant d’obtenir des résonances secondaires. Ces résonances sont observées couramment et nous avons pu calculer les gains et finesses équivalentes. Nous avons aussi calculé les corrections non-paraxiales des modes propres d’une cavité non-planaires. Nous avons résolu les équations perturbatives de Lax pour des faisceaux gaussiens elliptiques généralisés. Nous avons pu ainsi décrire qualitativement des résultats expérimentaux obtenus avec une cavité non-planaire constituée de quatre miroirs. Nous avons aussi modélisé l’effet des déformations thermoélastiques des miroirs de cavité en utilisant le modèle simplifié de Winkler. Sur le plan expérimental, nous avons effectué des études sur le résonateur optique prototype du projet EQUIPEX THOMX. Nous avons tout d’abord proposé une nouvelle méthode d’asservissement laser-cavité basée sur l’utilisation d’une possible différence de phase induite par la réflexion des ondes s et p. Comparée à la méthode de Pound-Drever-Hall, notre méthode ne nécessite pas de modulation et démodulation de fréquence. Nous avons effectué les calculs de modélisation ainsi qu’une démonstration expérimentale. En parallèle, nous avons effectué des expériences de stockage de puissance dans la cavité prototype de finesse 26000 et nous avons obtenu une puissance moyenne de 383 kW correspondant à un gain de 10000. Nous avons atteint un niveau de puissance pour laquelle des instabilités modales induites par les déformations thermoélastiques des miroirs de notre cavité deviennent dominantes et perturbent l’asservissement laser-cavité. Une machine à rayon X Thomson, TTX, existe aussi à l’université de Tsinghua. Celle-ci est basée sur un accélérateur linéaire et une source laser femtoseconde terawatt. Un nouveau projet basé sur un anneau de stockage compact d’électrons, TTX2, voit actuellement le jour à l’université de Tsinghua. Nous présentons le design du système optique de ce futur projet. / At present, X-rays imaging is widely applied in solid-state physics, in the life sciences, in medical applications and in other disciplines. An X-ray source based on laser-electron interaction, that is, a Thomson scattering X-ray source, can be used to produce high-quality X-rays at a low cost and small footprint. The construction of compact laser electron sources, consisting of an electron storage ring and an optical enhancement cavity, has recently attracted the interest of many institutions. The optical enhancement cavity is mainly used to amplify the injected power, circulate the pulses at a high repetition frequency (tens of megahertz) and produce a beam with a small waist at the interaction point. When introduced into the electron storage ring, the laser pulses produced in the high-average-power cavity scatter off high-energy electrons at a high repetition frequency. Thus, a high X-ray flux of more than 10^{11} ph/s can be obtained.In order to study the physical process inside a high-power resonator a model has been developed. As a first step, we establish a precise transient model of the laser pulse stacking technique considering the CEP (carrier-envelope phase) effect and time detuning leading to secondary resonances. The results of this model in the time and frequency domains match very well. A cavity with a given finesse and no detuning has a narrower linewidth than a detuned cavity with a higher finesse if both cavities have the same gain; consequently, it is easier to lock a laser to the latter cavity. Next, for the first time, we derived the non-paraxial corrections for general astigmatic beams so as to explain the S-shaped cavity mode observed in a non-planar four-mirror cavity. We solved Lax perturbation series of the wave equation for general elliptic Gaussian beams and S-shaped beam modes appear as the beam propagates away from the cavity symmetry point. This feature agrees qualitatively with observations made on a highly divergent non-planar four-mirror cavity. In addition, we study the thermal effect by using Winkler’s deformation model. The cavity gain is very sensitive to the mirror deformation in open loop. A strong feedback and ultra-low expansion mirrors are indispensable to reach a high power stored in the cavity.Several significant experiments were performed on a prototype cavity of the EQUIPEX project THOMX. Firstly, we proposed a new frequency stabilization method based on the polarization of a folded cavity and tuning of the cavity mirror reflectivity. Sufficient s- and p-wave phase detuning can be obtained by special design of the cavity mirrors’ coatings, which gives rise to an error signal that can be used for locking. Compared to the traditional Pound-Drever-Hall method, this technique is simpler without need for frequency modulation and demodulation. Theoretical calculations and experimental results demonstrate the feasibility of the proposed method. Meanwhile, high-power experiments on the prototype cavity for ThomX were demonstrated. A cavity finesse of approximately 26,000 is measured using four different methods, and the deposition of dust on the cavity mirrors is found to have an enormous effect on the finesse. We achieved a stable average power as high as 383 kW with a cavity gain of 10,000. In addition, modal instabilities which limit this power were observed. We believe that this effect originates from cavity modal frequency degeneracy induced by thermal effect.Tsinghua University hosts a compact, low-repetition-frequency X-ray source knownas TTX, which is based on a linac system and a terawatt femtosecond laser system. The next step is to upgrade TTX to a high-repetition-frequency X-ray machine called TTX2, consisting of an optical cavity and an electron storage ring. We present the complete design of a prototype optical cavity for TTX2.

Cette thèse a été effectuée dans le cadre du projet européen FP7 EMPHATIC (Enhanced Multicarrier Techniques for Professional Ad-Hoc and Cell-Based Communications). Plusieurs universités européennes et deux partenaires industriels: THALES Communications Security et CASSIDIAN ont participé à ce projet. L'objectif de ce projet est de développer, d'évaluer et de démontrer les apports des techniques multi-porteuses avancées, permettant une meilleure utilisation des bandes de fréquences radio existantes en fournissant des services de données à large bande, en coexistence avec les services traditionnels à bande étroite. Le projet porte sur l'application de radiocommunications mobiles professionnelles (Professional Mobile Radio : PMR). L'idée principale de ce projet est d'analyser la viabilité des systèmes à large bande utilisant des bancs de filtres (Filter Bank Multi Carrier : FBMC) conjointement avec une modulation d'amplitude en quadrature avec décalage (Offset Quadrature Amplitude Modulation : OQAM) dans le cadre de la 5ème génération (5G) des systèmes radio-mobiles. La modulation FBMC-OQAM se positionne comme candidate potentielle pour les futurs systèmes de communication. Cette modulation avancée offre de nombreux avantages tels que l’excellente localisation fréquentielle de sa densité spectrale de puissance (DSP), une robustesse au bruit de phase, aux décalages de fréquence ainsi qu’à l’asynchronisme entre les utilisateurs. Ces atouts, la rendent plus attrayant qu’OFDM pour l’application PMR, la radio cognitive (CR) et la 5G. Cependant, comme toute autre technique de modulation muti-porteuses, FBMC-OQAM souffre d’un facteur de crête ou d’un PAPR (pour Peak to Average Power Ratio) élevé. Lorsque l'amplificateur de puissance (AP), utilisé au niveau de l’émetteur, est opéré proche de sa zone non-linéaire (NL), ce qui est le cas dans la pratique, la bonne localisation fréquentielle de la DSP du système FBMC/OQAM est sérieusement compromise, en raison des remontées spectrales. Le premier objectif de cette thèse est de prédire l'étendue des remontées spectrales dans les systèmes FBMC-OQAM, introduites par la non-linéarité AP. Le deuxième objectif de ce travail est de proposer des techniques, pour les systèmes FBMC-OQAM, permettant la réduction du PAPR et la linéarisation de l’AP, afin d'atténuer les effets NL. L’utilisation des cumulants, a permis de prédire les remontées spectrales pour les signaux FBMC-OQAM après amplification NL. En outre, certains algorithmes de réduction du PAPR, basées sur des approches probabilistes et des techniques d'ajout de signaux, ont été proposés. La capacité de coexistence du système à large bande utilisant FBMC-OQAM avec des systèmes PMR à bande étroite en présence de PA a été analysée et il a été démontré que la coexistence est possible, à condition qu'il y est une bonne combinaison entre le recul du signal à l’entrée de l’AP (Input Back-Off : IBO), la réduction du PAPR et la linéarisation de l’AP. Enfin, une nouvelle technique de linéarisation de l’AP a été proposée pour le système FBMC-OQAM. / This thesis is part of the European FP7 EMPHATIC project (Enhanced Multicarrier Techniques for Professional Ad-Hoc and Cell-Based Communications) including various European universities and two main industrial partners: THALES Communications Security and CASSIDIAN. The EMPHATIC objective is to develop, evaluate and demonstrate the capability of enhanced multi-carrier techniques to make better use of the existing radio frequency bands in providing broadband data services in coexistence with narrowband legacy services. The project addresses the Professional Mobile Radio (PMR) application. The main idea is to analyze the viability of broadband systems based on filter-bank multi-carrier (FBMC) clubbed with o ffset quadrature amplitude modulation (OQAM) in the context of the future 5th Generation (5G) radio access technology (RAT). Increasingly, the FBMC-OQAM systems are gaining appeal in the probe for advanced multi-carrier modulation (MCM) waveforms for future communication systems. This advanced modulation scheme o ers numerous advantages such as excellent frequency localization in its power spectral density (PSD), a robustness to phase noise, frequency off sets and also to the multi-user asynchronism; making it more appealing than OFDM for PMR, cognitive radio (CR) and 5G RAT. However, like any other MCM technique, FBMC-OQAM suff ers from high PAPR. When the power amplifi er (PA) non-linearity, which is realistic radio-frequency impairment, is taken into account; the good frequency localization property is severely compromised, due to the spectral regrowth. The first objective of this PhD thesis is, to predict the extent of the spectral regrowth in FBMC-OQAM systems, due to the PA non-linearity. The second objective is to probe techniques for FBMC-OQAM systems, such as PAPR reduction and PA linearization, in order to mitigate the NL eff ects of PA. By cumulant analysis, spectral regrowth prediction has been done for FBMC-OQAM systems. Also, some algorithms for PAPR reduction, which are based on probabilistic approach and adding signal methods, have been proposed. The coexistence capability of the FBMC-OQAM based broadband system with the narrowband PMR systems in the presence of PA has been analyzed and it has been found that coexistence is possible, provided there is a symbiotic combination of PA Input Back-off (IBO), PAPR reduction and PA linearization. Finally, a novel PA linearization technique has been proposed for FBMC-OQAM.

It is well known that communication systems employing multiple transmit and multiple receive antennas provide high data rates along with increased reliability. Some of the design criteria of the space-time block codes (STBCs) for multiple input multiple output (MIMO)communication system are that these codes should attain large transmit diversity, high data-rate, low decoding-complexity, low decoding –delay and low peak-to-average power ratio (PAPR). STBCs based on real orthogonal designs (RODs) and complex orthogonal designs (CODs) achieve full transmit diversity and in addition, these codes are single-symbol maximum-likelihood (ML) decodable. It has been observed that the data-rate (in number of information symbols per channel use) of the square CODs falls exponentially with increase in number of antennas and it has led to the construction of rectangular CODs with high rate. We have constructed a class of maximal-rate CODs for n transmit antennas with rate if n is even and if n is odd. The novelty of the above construction is that they 2n+1 are constructed from square CODs. Though these codes have a high rate, this is achieved at the expense of large decoding delay especially when the number of antennas is 5or more. Moreover the rate also converges to half as the number of transmit antennas increases. We give a construction of rate-1/2 CODs with a substantial reduction in decoding delay when compared with the maximal- rate codes. Though there is a significant improvement in the rate of the codes mentioned above when compared with square CODs for the same number of antennas, the decoding delay of these codes is still considerably high. For certain applications, it is desirable to construct codes which are balanced with respect to both rate and decoding delay. To this end, we have constructed high rate and low decoding-delay RODs and CODs from Cayley-Dickson Algebra. Apart from the rate and decoding delay of orthogonal designs, peak-to-average power ratio (PAPR) of STBC is very important from implementation point of view. The standard constructions of square complex orthogonal designs contain a large number of zeros in the matrix result in gin high PAPR. We have given a construction for square complex orthogonal designs with lesser number of zero entries than the known constructions. When a + 1 is a power of 2, we get codes with no zero entries. Further more, we get complex orthogonal designs with no zero entry for any power of 2 antennas by introducing co- ordinate interleaved variables in the design matrix. These codes have significant advantage over the existing codes in term of PAPR. The only sacrifice that is made in the construction of these codes is that the signaling complexity (of these codes) is marginally greater than the existing codes (with zero entries) for some of the entries in the matrix consist of co-ordinate interleaved variables. Also a class of maximal-rate CODs (For mathematical equations pl see the pdf file)