Spelling suggestions: "subject:"baseball""
51 |
Equalization of Non-linear Satellite Communication Channels using Echo State NetworksBauduin, Marc 28 October 2016 (has links)
Satellite communication system designers are continuously struggling to improve the channel capacity. A critical challenge results from the limited power available aboard the satellite.Because of this constraint, the onboard power amplifier must work with a small power supply which limits its maximum output power. To ensure a sufficient Signal-to-Noise power Ratio (SNR) on the receiver side, the power amplifier must work close to its saturation point. This is power efficient but unfortunately adds non-linear distortions to the communication channel. The latters are very penalizing for high order modulations.In the literature, several equalization algorithms have been proposed to cope with the resulting non-linear communication channel. The most popular solution consists in using baseband Volterra series in order to build non-linear equalization filters. On the other hand, the Recurrent Neural Networks (RNNs), which come from the artificial neural network field, are also interesting candidates to generate such non-linear filters. But they are difficult to implement in practice due to the high complexity of their training. To simplify this task, the Echo State Network (ESN) paradigm has been proposed. It has the advantage of offering performances similar to classical RNNs but with a reduced complexity.The purpose of this work is, first, to compare this solution to the state-of-the-art baseband Volterra filters. We show that the classical ESN is able to reach the same performances, evaluated in terms of Bit Error Rate (BER), and has similar complexity. Secondly, we propose a new design for the ESN which achieves a strong reduction in complexity while conserving a similar BER.To compensate for the channel, the literature proposes to adapt the coefficients of these equalizers with the help of a training sequence in order to recover the transmitted constellation points. We show that, in such a case, the usual symbol detection criterion, based on Euclidean distances, is no longer optimal. For this reason, we first propose a new detection criterion which meets the Maximum Likelihood (ML) criterion. Secondly, we propose a modification of the equalizers training reference points in order to improve their performances and make the detection based on Euclidean distances optimal again. This last solution can offer a significant reduction of the BER without increasing the equalization and detection complexity. Only the new training reference points must be evaluated.In this work, we also explore the field of analog equalizers as different papers showed that the ESN is an interesting candidate for this purpose. It is a promising approach to reduce the equalizer complexity as the digital implementation is very challenging and power-hungry, in particular for high bandwidth communications. We numerically demonstrate that a dedicated analog optoelectronic implementation of the ESN can reach the state-of-the-art performance of digital equalizers. In addition, we show that it can reduce the required resolution of the Analog-to-Digital Converters (ADCs).Finally, a hardware demonstration of the digital solutions is proposed. For this purpose, we build a physical layer test bench which depicts a non-linear communication between two radios. We show that if we drive the transmitter power amplifier close to its saturation point, we can improve the communication range if the non-linear distortions are compensated for at the receiver. The transmitter and the receiver are implemented with Software Defined Radios (SDRs). / Doctorat en Sciences de l'ingénieur et technologie / info:eu-repo/semantics/nonPublished
|
52 |
Unified Framework for Multicarrier and Multiple Access based on Generalized Frequency Division MultiplexingNimr, Ahmad 08 July 2021 (has links)
The advancements in wireless communications are the key-enablers of new applications with stringent requirements in low-latency, ultra-reliability, high data rate, high mobility, and massive connectivity. Diverse types of devices, ranging from tiny sensors to vehicles, with different capabilities need to be connected under various channel conditions. Thus, modern connectivity and network techniques at all layers are essential to overcome these challenges. In particular, the physical layer (PHY) transmission is required to achieve certain link reliability, data rate, and latency. In modern digital communications systems, the transmission is performed by means of a digital signal processing module that derives analog hardware. The performance of the analog part is influenced by the quality of the hardware and the baseband signal denoted as waveform. In most of the modern systems such as fifth generation (5G) and WiFi, orthogonal frequency division multiplexing (OFDM) is adopted as a favorite waveform due to its low-complexity advantages in terms of signal processing. However, OFDM requires strict requirements on hardware quality.
Many devices are equipped with simplified analog hardware to reduce the cost. In this case, OFDM does not work properly as a result of its high peak-to-average power ratio (PAPR) and sensitivity to synchronization errors. To tackle these problems, many waveforms design have been recently proposed in the literature. Some of these designs are modified versions of OFDM or based on conventional single subcarrier. Moreover, multicarrier frameworks, such as generalized frequency division multiplexing (GFDM), have been proposed to realize varieties of conventional waveforms. Furthermore, recent studies show the potential of using non-conventional waveforms for increasing the link reliability with affordable complexity. Based on that, flexible waveforms and transmission techniques are necessary to adapt the system for different hardware and channel constraints in order to fulfill the applications requirements while optimizing the resources.
The objective of this thesis is to provide a holistic view of waveforms and the related multiple access (MA) techniques to enable efficient study and evaluation of different approaches. First, the wireless communications system is reviewed with specific focus on the impact of hardware impairments and the wireless channel on the waveform design. Then, generalized model of waveforms and MA are presented highlighting various special cases. Finally, this work introduces low-complexity architectures for hardware implementation of flexible waveforms. Integrating such designs with software-defined radio (SDR) contributes to the development of practical real-time flexible PHY.:1 Introduction
1.1 Baseband transmission model
1.2 History of multicarrier systems
1.3 The state-of-the-art waveforms
1.4 Prior works related to GFDM
1.5 Objective and contributions
2 Fundamentals of Wireless Communications
2.1 Wireless communications system
2.2 RF transceiver
2.2.1 Digital-analogue conversion
2.2.2 QAM modulation
2.2.3 Effective channel
2.2.4 Hardware impairments
2.3 Waveform aspects
2.3.1 Single-carrier waveform
2.3.2 Multicarrier waveform
2.3.3 MIMO-Waveforms
2.3.4 Waveform performance metrics
2.4 Wireless Channel
2.4.1 Line-of-sight propagation
2.4.2 Multi path and fading process
2.4.3 General baseband statistical channel model
2.4.4 MIMO channel
2.5 Summary
3 Generic Block-based Waveforms
3.1 Block-based waveform formulation
3.1.1 Variable-rate multicarrier
3.1.2 General block-based multicarrier model
3.2 Waveform processing techniques
3.2.1 Linear and circular filtering
3.2.2 Windowing
3.3 Structured representation
3.3.1 Modulator
3.3.2 Demodulator
3.3.3 MIMO Waveform processing
3.4 Detection
3.4.1 Maximum-likelihood detection
3.4.2 Linear detection
3.4.3 Iterative Detection
3.4.4 Numerical example and insights
3.5 Summary
4 Generic Multiple Access Schemes 57
4.1 Basic multiple access and multiplexing schemes
4.1.1 Infrastructure network system model
4.1.2 Duplex schemes
4.1.3 Common multiplexing and multiple access schemes
4.2 General multicarrier-based multiple access
4.2.1 Design with fixed set of pulses
4.2.2 Computational model
4.2.3 Asynchronous multiple access
4.3 Summary
5 Time-Frequency Analyses of Multicarrier
5.1 General time-frequency representation
5.1.1 Block representation
5.1.2 Relation to Zak transform
5.2 Time-frequency spreading
5.3 Time-frequency block in LTV channel
5.3.1 Subcarrier and subsymbol numerology
5.3.2 Processing based on the time-domain signal
5.3.3 Processing based on the frequency-domain signal
5.3.4 Unified signal model
5.4 summary
6 Generalized waveforms based on time-frequency shifts
6.1 General time-frequency shift
6.1.1 Time-frequency shift design
6.1.2 Relation between the shifted pulses
6.2 Time-frequency shift in Gabor frame
6.2.1 Conventional GFDM
6.3 GFDM modulation
6.3.1 Filter bank representation
6.3.2 Block representation
6.3.3 GFDM matrix structure
6.3.4 GFDM demodulator
6.3.5 Alternative interpretation of GFDM
6.3.6 Orthogonal modulation and GFDM spreading
6.4 Summary
7 Modulation Framework: Architectures and Applications
7.1 Modem architectures
7.1.1 General modulation matrix structure
7.1.2 Run-time flexibility
7.1.3 Generic GFDM-based architecture
7.1.4 Flexible parallel multiplications architecture
7.1.5 MIMO waveform architecture
7.2 Extended GFDM framework
7.2.1 Architectures complexity and flexibility analysis
7.2.2 Number of multiplications
7.2.3 Hardware analysis
7.3 Applications of the extended GFDM framework
7.3.1 Generalized FDMA
7.3.2 Enchantment of OFDM system
7.4 Summary
7 Conclusions and Future works
|
53 |
Terahertz-Band Ultra-Massive MIMO Data Detection and DecodingJemaa, Hakim 04 April 2022 (has links)
As the quest for higher data rates continues, future generations of wireless communications are expected to concur even higher frequency bands, particularly at terahertz (THz) frequencies. Even though the vast bandwidths at the THz band promise terabit-per-second (Tbps) data rates, current baseband technologies do not support such high rates. In particular, the complexities of Tbps channel code decoding and ultra-massive multiple-input multiple-output data detection are prohibitive.
This work addresses the efficient data detection and channel-code decoding problem under THz-band channel conditions and Tbps baseband processing limitations. We propose ultra-massive multiple-input multiple-output THz channel models, then investigate the corresponding performance of several candidate data detection and coding schemes. We further investigate the complexity of different detectors and decoders, motivating parallelizability at both levels. We recommend which detector to combine best with which channel code decoder under specific THz channel characteristics.
|
54 |
DISTRIBUTED ARCHITECTURE FOR A GLOBAL TT&C NETWORKMartin, Fredric W. 10 1900 (has links)
International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California / Use of top-down design principles and standard interface
techniques provides the basis for a global telemetry data
collection, analysis, and satellite control network with a
high degree of survivability via use of distributed
architecture. Use of Commercial Off-The-Shelf (COTS)
hardware and software minimizes costs and provides for easy
expansion and adaption to new satellite constellations.
Adaptive techniques and low cost multiplexers provide for
graceful system wide degradation and flexible data
distribution.
|
55 |
Design and implementation of adaptive baseband predistorter for OFDM nonlinear transmitter : simulation and measurement of OFDM transmitter in presence of RF high power amplifier nonlinear distortion and the development of adaptive digital predistorters based on Hammerstein approachSadeghpour Ghazaany, Tahereh January 2011 (has links)
The objective of this research work is to investigate, design and measurement of a digital predistortion linearizer that is able to compensate the dynamic nonlinear distortion of a High Power Amplifier (PA). The effectiveness of the proposed baseband predistorter (PD) on the performance of a WLAN OFDM transmitter utilizing a nonlinear PA with memory effect is observed and discussed. For this purpose, a 10W Class-A/B power amplifier with a gain of 22 dB, operated over the 3.5 GHz frequency band was designed and implemented. The proposed baseband PD is independent of the operating RF frequency and can be used in multiband applications. Its operation is based on the Hammerstein system, taking into account PA memory effect compensation, and demonstrates a noticeable improvement compared to memoryless predistorters. Different types of modelling procedures and linearizers were introduced and investigated, in which accurate behavioural models of Radio Frequency (RF) PAs exhibiting linear and nonlinear memory effects were presented and considered, based on the Wiener approach employing a linear parametric estimation technique. Three new linear methods of parameter estimation were investigated, with the aim of reducing the complexity of the required filtering process in linear memory compensation. Moreover, an improved wiener model is represented to include the nonlinear memory effect in the system. The validity of the PA modelling approaches and predistortion techniques for compensation of nonlinearities of a PA were verified by several tests and measurements. The approaches presented, based on the Wiener system, have the capacity to deal with the existing trade-off between accuracy and convergence speed compared to more computationally complex behavioural modelling algorithms considering memory effects, such as those based on Volterra series and Neural Networks. In addition, nonlinear and linear crosstalks introduced by the power amplifier nonlinear behaviour and antennas mutual coupling due to the compact size of a MIMO OFDM transmitter have been investigated.
|
56 |
Baseband Processing in Analog Combining MIMO Systems: From Theoretical Design to FPGA ImplementationElvira Arregui, Víctor 21 July 2011 (has links)
In this thesis, we consider an analog antenna combining architecture for a MIMO wireless transceiver, while pointing out its advantages with respect to the traditional MIMO architectures. In the first part of this work, we focus on the transceiver design, especially the calculation of the beamformers that must be applied at the RF. This analysis is performed in an OFDM system under different assumptions on the channel state information. As a result, several criteria and algorithms for the selection of the beamformers are proposed. In the second part, we address the FPGA design and implementation of a baseband processor for this architecture. This baseband processor is based on the standard IEEE 802.11a. Finally, some real-time tests of the implemented baseband processor are carried out both in stand-alone configuration and also with the whole physical layer setup. / En esta tesis consideramos una arquitectura de combinación analógica de antenas para una estación inalámbrica MIMO, señalando las ventajas de ésta con respecto a la arquitectura tradicional MIMO. En la primera parte de este trabajo analizamos el cálculo de los pesos que se deben aplicar en RF. Este análisis es realizado para un sistema OFDM bajo diferentes suposiciones sobre el conocimiento del canal en el transmisor. Como resultado, se ofrecen varios criterios y algoritmos para el cálculo de los pesos. La segunda parte se centra en el diseño y la implementación FPGA de un procesador banda base para esta arquitectura. Este procesador está basando en el estándar IEEE 802.11a. Finalmente se llevan a cabo algunos experimentos en tiempo-real del procesador banda base. Estos experimentos se han realizado tanto con el procesador aislado como integrado en el resto de la capa física del sistema.
|
57 |
Efficient digital baseband predistortion for modern wireless handsetsBa, Seydou Nourou 10 November 2009 (has links)
This dissertation studies the design of an efficient adaptive digital baseband predistorter for modern cellular handsets that combines low power consumption, low implementation complexity, and high performance. The proposed enhancements are optimized for hardware implementation. We first present a thorough study of the optimal spacing of linearly-interpolated lookup table predistorters supported by theoretical calculations and extensive simulations. A constant-SNR compander that increases the predistorter's supported input dynamic range is derived. A corresponding low-complexity approximation that lends itself to efficient hardware design is also implemented in VHDL and synthesized with the Synopsys Design Compiler. This dissertation also proposes an LMS-based predistorter adaptation that is optimized for hardware implementation and compares the effectiveness of the direct and indirect learning architectures. A novel predistorter design with quadrature imbalance correction capability is developed and a corresponding adaptation scheme is proposed. This robust predistorter configuration is designed by combining linearization and I/Q imbalance correction into a single function with the same computational complexity as the widespread complex-gain predistorter.
|
58 |
Design and implementation of adaptive baseband predistorter for OFDM nonlinear transmitter. Simulation and measurement of OFDM transmitter in presence of RF high power amplifier nonlinear distortion and the development of adaptive digital predistorters based on Hammerstein approach.Ghazaany, Tahereh S. January 2011 (has links)
The objective of this research work is to investigate, design and measurement of a digital
predistortion linearizer that is able to compensate the dynamic nonlinear distortion of a High
Power Amplifier (PA). The effectiveness of the proposed baseband predistorter (PD) on the
performance of a WLAN OFDM transmitter utilizing a nonlinear PA with memory effect is
observed and discussed. For this purpose, a 10W Class-A/B power amplifier with a gain of 22
dB, operated over the 3.5 GHz frequency band was designed and implemented.
The proposed baseband PD is independent of the operating RF frequency and can be used in
multiband applications. Its operation is based on the Hammerstein system, taking into account
PA memory effect compensation, and demonstrates a noticeable improvement compared to
memoryless predistorters.
Different types of modelling procedures and linearizers were introduced and investigated, in
which accurate behavioural models of Radio Frequency (RF) PAs exhibiting linear and
nonlinear memory effects were presented and considered, based on the Wiener approach
employing a linear parametric estimation technique. Three new linear methods of parameter
estimation were investigated, with the aim of reducing the complexity of the required filtering
process in linear memory compensation. Moreover, an improved wiener model is represented to
include the nonlinear memory effect in the system. The validity of the PA modelling approaches
and predistortion techniques for compensation of nonlinearities of a PA were verified by several
tests and measurements. The approaches presented, based on the Wiener system, have the
capacity to deal with the existing trade-off between accuracy and convergence speed compared
to more computationally complex behavioural modelling algorithms considering memory
effects, such as those based on Volterra series and Neural Networks.
In addition, nonlinear and linear crosstalks introduced by the power amplifier nonlinear
behaviour and antennas mutual coupling due to the compact size of a MIMO OFDM transmitter
have been investigated.
|
59 |
Interface radio IR-UWB reconfigurable pour les réseaux de microsystèmes communicants / Reconfigurable IR-UWB radio interface for wireless sensor networksLecointre, Aubin 01 October 2010 (has links)
Les travaux présentés lors de cette thèse s’inscrivent dans le cadre des réseaux de microsystèmes communicants dont les réseaux de capteurs sont l’exemple le plus connu. La problématique adressée est la conception d’une interface radio communicante répondant aux besoins spécifiques des microsystèmes communicants : simplicité, faible coût, faible consommation, faible encombrement, haut débit et reconfigurabilité. Les technologies actuelles sans fil comme le WiFi, le Bluetooth, et Zigbee ne sont pas en mesure de répondre à ces contraintes spécifiques. L’étude se focalise sur la technologie IR-UWB (Impulse Radio Ultra-WideBand). Dans un premier temps, une étude conjointe sur la capacité du canal et l’implémentation matérielle est menée pour déterminer l’architecture optimale des émetteurs-récepteurs en IR-UWB. Cette étude propose l’utilisation d’une architecture multi bandes IR-UWB (MB-IR-UWB) à implémentation mixte à 60 GHz avec des antennes directives. Cette solution est optimisée sur les critères de débit et puissance consommée. Afin de supporter l’ensemble des besoins des applications des réseaux de microsystèmes communicants et l’évolution de l’environnement d’opération, la reconfigurabilité doit être implémentée dans les émetteur-récepteurs proposés. Ces travaux présentent une proposition de reconfigurabilité par paramètres, qui permet de supporter la plus grande gamme de reconfigurabilités multi propriétés (débit, taux d’erreur, portée, puissance consommée, …) de l’état de l’art. Enfin, pour valider par la mesure les travaux sur la reconfigurabilité et sur les architectures d’émetteur-récepteurs IR-UWB, des implémentations FPGA et ASIC sont réalisées. Un nouveau procédé de synchronisation et démodulation conjointe reconfigurable est proposé dans le récepteur IR-UWB BPSK S-Rake. Les mesures montrent que le circuit de traitement proposé améliore les performances en synchronisation, démodulation, efficacité, débit du réseau, consommation et complexité du circuit. L’émetteur-récepteur IR-UWB reconfigurable proposé atteint un débit et une gamme de reconfigurabilité supérieure à l’état de l’art. / The research work presented in this thesis is situated in the framework of wireless sensor networks (WSNs). The issue addressed is the design of a radio interface answering the specific needs of WSNs: simplicity, low cost, low power, small size, high data rate and reconfigurability. Current wireless technologies like WiFi, Bluetooth, and Zigbee are not able to respond to these requirements. Thus this study focuses on Impulse Radio Ultra-WideBand (IR-UWB) technology. At first, a joint study of the channel capacity and the hardware implementation is carried out to determine the optimal architecture of IR-UWB transceivers. This study proposes an architecture using multi-band IR-UWB (MB-UWB-IR) with a mixed implementation at 60 GHz with directional antennas. This solution is optimized according to the criteria of data rate and power consumption. To support the all the needs of WSN applications and to adapt to the evolution of the WSN’s environment, reconfigurability must be implemented in the proposed IR-UWB transceiver. This thesis presents a new solution: the reconfigurability by parameters. It supports the widest range of multi-property reconfigurability (with respect to data rate, bit error rate, radio range, power consumption, ...) of the state of the art. Finally, to validate these techniques by measurements, FPGA and ASIC implementations are realized by using the reconfigurability and the IR-UWB transceiver architecture proposed. A new method for joint synchronization and demodulation is proposed for a reconfigurable IR-UWB BPSK S-Rake receiver. The measurements show that the proposed technique improves the circuit performance: synchronization, demodulation, efficiency, network throughput, power consumption and complexity of the circuit. The proposed IR-UWB reconfigurable transceiver achieves a data rate and a wider range of reconfigurability compared to the state of the art
|
Page generated in 0.0573 seconds