The exploitation of the relationship between the chemical and physical properties of materials is the hallmark of advancing science throughout the world. The basic understanding of how and why molecules react and interact with each other in different environments allows for the discovery and implementation of new materials and devices that not only advance the state of human life but continually change the planet. The work described in this dissertation generally falls under three diverse categories: functionalization of fullerenes, investigation of host/guest interactions in solution, and the synthesis and characterization of ion containing polymers. The separation and functionalization of fullerenes is a recent and exciting area of research. The separation methods outlined are intended to increase the availability of endohedral metallofullerenes by decreasing their cost of production. Functionalized fullerene species were achieved through Bingel and Prato reactions to provide materials with novel functional groups. These materials may be further utilized in photovoltaic or other organic electronic devices. The characterization of noncovalent interactions between different molecules in solution is the focus of supramolecular chemistry. Isothermal Titration Calorimetry stands out as one of the best, among the many methods used to elucidate the characteristics of these systems. The binding of bis- imidazolium and paraquat guests with macrocyclic host molecules has been explored in this work. The measurements of the association constants for these systems will aid in the ongoing synthesis of new host/guest systems. Ion containing polymers were synthesized and characterized for their use in electroactive devices. Imidazolium containing polymers with bulky anions were synthesized on low glass transition polymer chains. These materials had enhanced ion conductivity and may eventually be used in electronic actuator materials. / Ph. D.

Advanced analytical techniques were utilized to investigate the intermolecular forces in several nanostructured materials. Techniques including, but not limited to, isothermal titration calorimetry (ITC), variable temperature Fourier transform infrared (FTIR) spectroscopy, and ultraviolet-visible (UV-Vis) thermal curves were used to study the fundamental interactions present in various nanomaterials, and to further probe the influence of these interactions on the overall behavior of the material. The areas of focus included self-assembly of surfactant micelles, polycation complexation of DNA, and temperature-dependent hydrogen bonding in polymeric systems. ITC was successfully used to determine the low critical micelle concentration (CMC) for a novel gemini surfactant with limited water solubility. CMCs were measured at decreasing methanol molar fractions (xMeOH) in water and the resulting linear relationship between CMC and methanol concentration was used to mathematically extrapolate to a predicted CMC at xMeOH = 0. Using this technique, the CMC value for the novel gemini surfactant was predicted to be 0.037 ± 0.004 mM. This extrapolation technique was also validated with surfactant standards. ITC was also used to investigate the binding thermodynamics of polyplex formation with polycations and DNA. The imidazolium-containing and trehalose-based polycations were both found to have endothermic, entropically driven binding with DNA, while the adenine-containing polycation exhibited exothermic DNA binding. In addition, ITC was also used to confirm the stoichiometric binding ratio of linear polyethylenimine and DNA polyplexes as determined by a novel NMR method. Dynamic light scattering (DLS) and zeta potential measurements were also performed to determine the size and surface charge of polyplexes. Circular dichroism (CD) and FTIR spectroscopies provided information regarding the structural changes that may occur in the DNA upon complexation with polymers. UV-Vis thermal curves indicated that polyplexes exhibit a greater thermal stability than DNA by itself. Variable temperature FTIR spectroscopy was used to quantitatively compare the hydrogen bonding behavior of multi-walled carbon nanotube (MWCNT)-polyurethane composites. Spectra were collected from 35 to 185 deg C for samples containing various weight percent loadings of MWCNTs with different hydrogen bonding surface functionalities. Peak fitting analysis was performed in the carbonyl-stretching region for each sample, and the hydrogen-bonding index (Rindex) was reported. Rindex values were used to quantitatively compare all of the composite samples in regards to temperature effects, weight percent loadings of MWCNTs, and the different functionalizations. In general, higher weight percent loadings of the MWCNTs resulted in greater Rindex values and increased hydrogen bond dissociation temperatures. In addition, at 5 and 10 wt% loadings the initial Rindex values displayed a trend that tracked well with the increasing hydrogen bonding capacity of the various surface functionalities. / Ph. D.

The purpose of this research was to determine the effects of cellulose nanocrystals (CNCs), as potential additives, on the properties and performance of phenol–formaldehyde (PF) adhesive resin. The steady-state viscosity of a commercial PF resol resin and three CNC–resin mixtures, containing 1–3 wt % CNCs, based on solids content, was measured with a rheometer as a function of shear rate. The viscosity of the PF resin itself was independent of shear rate. The viscosity–shear rate curves of the CNC–resin mixtures showed two regions, a shear thinning region at lower shear rates and a Newtonian region at higher shear rates. The low-shear-rate viscosity of the resin was greatly increased by the CNCs. The structure of the CNC–resin mixtures under quiescent conditions was analyzed by polarized light microscopy. The mixtures contained CNC aggregates, which could be disrupted by ultrasound treatment. The curing progressions of the resin and CNC–resin mixtures were analyzed by non-isothermal differential scanning calorimetry (DSC). The DSC curves showed two exotherms followed by an endotherm. The energy of activation for the first exotherm was reduced by the CNCs whereas the energy of activation for the second exotherm was not affected by the CNCs. Increasing CNC contents caused higher degrees of reaction conversion during the first curing stage and a greater loss of sample mass, attributed to formaldehyde release during resin cure. For analysis of the mechanical properties during and after cure, sandwich-type test specimens were prepared from southern yellow pine strips and the resin and CNC–resin mixtures. The mechanical properties of the test specimens were measured as a function of time and temperature by dynamic mechanical analysis (DMA). The time to incipient storage modulus increase decreased and the rate of relative storage modulus increase increased with increasing CNC content. The ultimate sample stiffness increased with increasing CNC content for CNC contents between 0 and 2 wt %, which was attributed to mechanical reinforcement of the resin by the CNCs. At a CNC content of 3 wt %, the ultimate sample stiffness was lower than at a CNC content of 2 wt % and the second tan δ maximum occurred earlier in the experiment, indicating an earlier onset of vitrification. The lower ultimate sample stiffness was attributed to premature quenching of the curing reactions through CNC-induced depression of the vitrification point. For analysis of the fracture performance, double cantilever beam test specimens were prepared from southern yellow pine beams and the resin and CNC–resin mixtures, using different hot-pressing times. Fracture energies were measured by mode I cleavage tests. Bondline characteristics were analyzed by light microscopy. At a hot-pressing time of 10 min, the fracture energy decreased with increasing CNC content, whereas it stayed constant for CNC contents between 1 and 3 wt % at a hot-pressing time of 8 min. The bondlines of resin mixtures containing CNCs exhibited voids, whereas those of the pure resin did not. CNCs had both benefitial and detrimental effects on the properties and performace of PF resin. / Master of Science

No / Incorporating edge activators (surfactants) into liposomes was shown previously to improve estradiol vesicular skin delivery; this phenomenon was concentration dependent with low or high concentrations being less effective. Replacing surfactants with limonene produced similar behaviour, but oleic acid effects were linear with concentration up to 16% (w/w), beyond which it was incompatible with the phospholipid. This present study thus employed high sensitivity differential scanning calorimetry to probe interactions of additives with dipalmitoylphosphatidylcholine (DPPC) membranes to explain such results. Cholesterol was included as an example of a membrane stabiliser that removed the DPPC pre-transition and produced vesicles with a higher transition temperature (Tm). Surfactants also removed the lipid pre-transition but reduced Tm and co-operativity of the main peak. At higher concentrations, surfactants also formed new species, possibly mixed micelles with a lower Tm. The formation of mixed micelles may explain reduced skin delivery from liposomes containing high concentrations of surfactants. Limonene did not remove the pre-transition but reduced Tm and co-operativity of the main peak, apparently forming new species at high concentrations, again correlating with vesicular delivery of estradiol. Oleic acid obliterated the pre-transition. The Tm and the co-operativity of the main peak were reduced with oleic acid concentrations up to 33.2 mol%, above which there was no further change. At higher concentrations, phase separation was evident, confirming previous skin transport findings.

No / Bulk crystallisation of protein therapeutic molecules towards their controlled drug delivery is of interest to the biopharmaceutical industry. The complexity of biotherapeutic molecules is likely to lead to complex material properties of crystals in the solid state and to complex transitions. This complexity is explored using batch crystallised lysozyme as a model. The effects of drying and milling on the solid-state transformations of lysozyme crystals were monitored using differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), FT-Raman, and enzymatic assay. XRPD was used to characterise crystallinity and these data supported those of crystalline lysozyme which gave a distinctive DSC thermogram. The apparent denaturation temperature (Tm) of the amorphous lysozyme was ∼201 °C, while the Tm of the crystalline form was ∼187 °C. Raman spectra supported a more α-helix rich structure of crystalline lysozyme. This structure is consistent with reduced cooperative unit sizes compared to the amorphous lysozyme and is consistent with a reduction in the Tm of the crystalline form. Evidence was obtained that milling also induced denaturation in the solid-state, with the denatured lysozyme showing no thermal transition. The denaturation of the crystalline lysozyme occurred mainly through its amorphous form. Interestingly, the mechanical denaturation of lysozyme did not affect its biological activity on dissolution. Lysozyme crystals on drying did not become amorphous, while milling-time played a crucial role in the crystalline-amorphous-denatured transformations of lysozyme crystals. DSC is shown to be a key tool to monitor quantitatively these transformations.

Yes / In this study, a comparison of different methods to predict drug−polymer solubility was carried out on binary systems consisting of five model drugs (paracetamol, chloramphenicol, celecoxib, indomethacin, and felodipine) and polyvinylpyrrolidone/vinyl acetate copolymers (PVP/VA) of different monomer weight ratios. The drug−polymer solubility at 25 °C was predicted using the Flory−Huggins model, from data obtained at elevated temperature using thermal analysis methods based on the recrystallization of a supersaturated amorphous solid dispersion and two variations of the melting point depression method. These predictions were compared with the solubility in the low molecular weight liquid analogues of the PVP/VA copolymer (N-vinylpyrrolidone and vinyl acetate). The predicted solubilities at 25 °C varied considerably depending on the method used. However, the three thermal analysis methods ranked the predicted solubilities in the same order, except for the felodipine−PVP system. Furthermore, the magnitude of the predicted solubilities from the recrystallization method and melting point depression method correlated well with the estimates based on the solubility in the liquid analogues, which suggests that this method can be used as an initial screening tool if a liquid analogue is available. The learnings of this important comparative study provided general guidance for the selection of the most suitable method(s) for the screening of drug−polymer solubility. / The Irish Research Council and Eli Lilly S.A. through an Irish Research Council Enterprise Partnership Scholarship for C.M.B., in part by The Royal Society in the form of Industrial Fellowship awarded to G.A., and in part by a research grant from Science Foundation Ireland (SFI) under Grant Number SFI/12/RC/2275 (for A.M.H., L.T., K.P., and A.K.).

No / Knowledge and control of the polymorphic phases of chemical compounds are important aspects of drug development in the pharmaceutical industry. Salmeterol xinafoate, a long acting β-adrenergic receptor agonist, exists in two polymorphic Forms, I and II. Raman and near infrared spectra were obtained of these polymorphs at selected wavelengths in the range of 488–1064 nm; significant differences in the Raman and near-infrared spectra were apparent and key spectral marker bands have been identified for the vibrational spectro-scopic characterisation of the individual polymorphs which were also characterised with X ray diffractometry. The solid-state transition of salmeterol xinafoate polymorphs was studied using simultaneous in situ portable Raman spectroscopy and differential scanning calorimetry isothermally between transitions. This method assisted in the unambiguous characterisation of the two polymorphic forms by providing a simultaneous probe of both the thermal and vibrational data. The study demonstrates the value of a rapid in situ analysis of a drug polymorph which can be of potential value for at-line in-process control.

The ability to tune the properties over a wide range of values by changing the additives, composition, etc., has made chalcogenide glassy semiconductors, most interesting from both fundamental physics as well as technology point of view. In particular, the occurrence of the two network topological thresholds namely the Rigidity Percolation Threshold (RPT) and the Chemical Threshold (CT) and their influence on various properties of chalcogenide glasses have been of immense interest during the last three decades. The Rigidity Percolation Threshold (also known as the Stiffness Threshold or Mechanical Threshold) corresponds to the composition at which the material transforms from a floppy polymeric glass to a rigid amorphous solid, whereas at Chemical Threshold the sample tends towards an ordered state. Though the rigidity percolation has been considered for long to occur at a critical threshold defined by the constraint’s theory, the recent theoretical and experimental investigations have found the RPT to occur over a range of compositions. In systems exhibiting an extended rigidity percolation, two distinct transitions namely from a floppy to an isostatically rigid phase and from an isostatically rigid to a stressed rigid phase are seen. In the category of chalcogenide glasses, tellurides have been found to exhibit interesting properties including the phenomenon of electrical switching which finds applications in Phase Change Memories (PCM). Studies on various thermal, electrical and photoelectrical properties of glassy tellurides help us in identifying suitable materials for different technological applications. This thesis deals with Differential Scanning Calorimetric (DSC) & Temperature Modulated Alternating Differential Scanning Calorimetric (ADSC) studies, electrical switching investigations, photoconductivity & photothermal measurements on certain metal doped telluride glasses. The composition dependence of properties such as glass transition & crystallization temperatures, switching voltage, thermal diffusivity, photosensitivity, etc., have been analyzed to obtain information about topological thresholds, thermally reversing window, etc. The first chapter of thesis provides an overview of properties of amorphous semiconductors, in particular chalcogenide glasses. The local & defect structure, the electronic band structure & electrical properties, electrical switching behavior, etc., are discussed in detail. The theoretical aspects related to the experiments undertaken in this thesis work have also been described. The instrumentation used for various experiments conducted to measure thermal, electrical, photoelectrical and photothermal properties have been discussed in chapter two. The chapter three deals with the photocurrent measurements on As40Te60-xInx (7.5 ≤ x ≤ 16.5) glasses. In these samples, it has been found that the photocurrent increases with illumination, which is understood on the basis of the large dielectric constant and also due to the presence of a large number of positively charged defect states. Further, the composition dependence of the conductivity activation energy and the photosensitivity exhibit a maximum at x = 12.5 (<r> = 2.65) and a minimum at x = 15.0 (<r> = 2.70) which has been identified to be the Rigidity Percolation Threshold (RPT) and the Chemical Threshold (CT) respectively. The results of electrical switching, DSC and Photothermal Deflection (PTD) studies on As20Te80-xGax (7.5 ≤ x ≤ 18.5) glasses, undertaken to elucidate the network topological thresholds, are described in chapter four. It has been found that all the As20Te80-xGax glasses studied exhibit memory type electrical switching. The switching voltage (VT) of these glasses increases monotonically with x, in the composition range 7.5 ≤ x ≤ 15.0. The increase in VT with gallium addition leads to a local maximum at x = 15.0 and VT decreases with x thereafter, reaching a distinct minimum at x = 17.5. Based on the variation with composition of the electrical switching voltages, the composition x = 15.0 and x = 17.5 have been identified to be the rigidity percolation and chemical thresholds of the As20Te80-xGax glassy system respectively. Further, the DSC studies indicate that As20Te80-xGax glasses exhibit a single glass transition (Tg) and two crystallization reactions (Tc1 & Tc2) upon heating. There is no appreciable change in Tg of As20Te80-xGax glasses with the addition of upto about10 atom% of Ga, whereas a continuous increase is seen in the crystallization temperature (Tc1). It is interesting to note that both Tg and Tc1 exhibit a maximum at x = 15.0 and a minimum at x = 17.5, the compositions identified to be the RPT and CT respectively by the switching experiments. The composition dependence of thermal diffusivity estimated from the PTD signal, indicate the occurrence of an extended stiffness transition in As20Te80-xGax glasses, with the compositions x = 9.0 and x = 15.0 being the onset and the completion of an extended rigidity percolation. A maximum and a minimum are seen in the thermal diffusivity respectively at these compositions. Further, a second maximum is seen in the thermal diffusivity of As20Te80-xGax glasses, the Chemical Threshold (CT) of the glassy system. The fifth chapter of the thesis describes the ADSC, electrical switching and photocurrent measurements on Ge15Te85-xInx (1 ≤ x ≤ 11) glasses. It is found there is not much change in the Tg of Ge15Te85-xInx glasses in the composition range 1 ≤ x ≤ 3. An increase is seen in Tg beyond x = 3, which continues until x = 11. Further, the composition dependence of non-reversing enthalpy shows the presence of a thermally reversing window in the compositions range x = 3 and x = 7. Electrical switching studies indicate that Ge15Te85-xInx glasses exhibit threshold type of switching at input currents below 2 mA. It is observed that switching voltages decrease initially with indium addition, exhibiting a minimum at x = 3, the onset of the extended rigidity percolation as revealed by ADSC. An increase is seen in VT above x = 3, which proceeds till x = 8, with a change in slope (lower to higher) seen around 7 atom% of indium which corresponds to the completion of the stiffness transition. The reversal in trend exhibited in the variation of VT at x = 8, leads to a well defined minimum around x = 9, the chemical threshold of the Ge15Te85-xInx glassy system. Photocurrent measurements indicate that there is no photodegradation in Ge15Te85-xInx glasses with x < 3, whereas samples with x ≥ 3 show photodegradation behavior. The composition dependent variation in the glass transition temperature has been attributed for this behavior. Further, the composition dependence of photo sensitivity has been found to show the signatures of the extended rigidity percolation and the chemical threshold in Ge15Te85-xInx glasses. The last chapter of thesis (chapter six) summarizes the results obtained and also the scope of future work to be undertaken.

Ce travail de thèse démontre l’importance d’intégrer des outils théoriques à des observations expérimentales dans le but d’étudier le rôle des interactions non-covalentes et plus précisément de la dispersion dans la chimie des métaux de transition. Plusieurs thèmes ont ainsi été abordés comme les interactions d’empilement entre chélates de métaux de transition à l’état solide; l’influence de la chiralité sur l’oligomérisation en solution de complexes plans carrés de Rh(I) isonitrile; la stabilité et inactivité inhabituelles de complexes de type cis-platine en solution concentrée. Les résultats obtenus par titration calorimétrique isotherme ont permis d’évaluer la capacité de méthodes théoriques à reproduire avec précision les résultats expérimentaux. Les calculs ont démontré qu’un traitement théorique approprié des effets de la dispersion et de la solvatation, donne des valeurs cohérentes avec les résultats expérimentaux. Cependant, des améliorations supplémentaires sont nécessaires. / This thesis has shown the importance of integration of theoretical calculations and experimental investigations in studying the role of non-covalent interactions and particularly dispersion interactions in transition metal chemistry. Several subjects were addressed, such as stacking interactions of chelates in transition metal complexes in solid state, influence of chirality on the oligomerization of Rh(I) isonitrile complexes in solution and the stability of the cis-platin type complexes in concentrated solutions. Isothermal titration calorimetry proved to be very useful in the studies by providing accurate experimental data on the thermochemistry of addressed processes. This data was used to gauge the ability of the theoretical methods to accurately reproduce the experimental results. Calculations have shown that the proper treatment of dispersion effects and solvation by theoretical models gives values in relatively good agreement with experiments, but further improvements are needed.

The study of protein and surfactant interactions is of great significance in a number of applications, such as the cosmetic, food or pharmaceutical industries and many others. However, they require further study due to their compositional complexity and the limitations of current analytical approaches. In this thesis, the cationic surfactant septonex in combination with two differently charged proteins lysozyme and bovine serum albumin under different physiological conditions (temperature, surfactant concentration, environment and others) was selected to study the interactions. Characterization of protein-surfactant interactions is a very important but challenging task, therefore it is essential to use appropriate approaches to explore the nature of these interactions. In order to unify the information to provide rational models, calorimetric methods (DSC, ITC) and dynamic light scattering were used. Isothermal titration calorimetry monitors the evidence for the formation of the system of the mentioned substances and information on aggregation behavior, differential scanning calorimetry characterizes the thermal stability of proteins and dynamic light scattering made it possible to monitor changes in particle size. Both proteins have been proven to interact with positive septonex, even if the lysozyme molecule is also positively charged. However, significant differences were found between the two proteins. From the obtained results it is evident that the identical charge of the protein with the surfactant has an effect on the intensity of the measurement, although all measured interactions showed an endothermic character.