41 |
Simulation of Attitude and Orbit Control for APEX CubeSatde Graaf, Niels January 2020 (has links)
CubeSats are becoming a game changer in the space industry. Appearing first for univer-sity mission, its popularity is increasing for commercial use and for deep space missionssuch as the on HERA mission that will orbit in 2026 around an asteroid as part of aplanetary defence mission. Standardisation and industrial collaboration is key to a fastdevelopment, assuring the product quality and lower development expenditures.In this study the focus is set elaborating a low cost demonstrator platform to be usedfor developing and testing onboard software on physical hardware: a Hardware-Softwaretesting facility. The purpose of such a platform is to create an interactive and accessibleenvironment for developing on board software. The application chosen to be elaboratedon this platform is a module the subsystem of attitude and orbit control of the satelliteorbiting around asteroid.In order to create this platform the simulation of the asteroid environment of theCubeSat has been made using open source software libraries. During this task the per-formance of open source libraries has been compared to commercial alternatives. In thedevelopment of simulation different orbit perturbations have been studied by modellingthe asteroid as a cube or spheroid and additionally the effect of a third perturbing bodyand radiation pressure.As part of this project two microcontroller have been set up communicating using acommunication bus and communication protocols used for space applications to simulatehow the attitude and orbit control is commanded inside the CubeSat.
|
42 |
Elektronický regulátor rychlosti vozidla / Electronic speed controllerŠimbera, Michal January 2019 (has links)
The thesis deals with the design, realisation and functional verification of an electronic cruise control unit. Required inputs, outputs and controller of the control unit are identified first. The design and layout of the electronical components, including the processor, power supply and other necessary hardware is discussed. The algorithm for the control unit is developed in C/C++ and thoroughly analysed. The functionality of the cruise control unit equipped with the algorithm is verified through a case study performed on a combustion engine.
|
43 |
Diagnostika dat v moderních řídících jednotkách motorů / Data diagnostics in modern car control unitsHájek, Ondřej January 2010 (has links)
Presented Diploma thesis is aimed on design and implementation of car diagnostic interface of engine control units EDC. Diagnostic interface provide communication between car and computer by USB interface. User will be able to task commands by developed computer application. For developing application is necessary to get information about used protocols and basic knowledge in car’s hardware. Understanding OBD2 standard and communication protocol CAN, eventually KWP is necessary for design the solution. Main purpose of this thesis is to store enough usable information about car diagnostic for future continuation.
|
44 |
Redeveloping a mixing system in a biomedical device to improve system control and increase its intelligence and effectiveness : Redeveloping a mixing mechanism using ESP32, TMC5130, Bluetooth and CAN-busBahtiti, Aref January 2023 (has links)
Biogas is a renewable energy source produced by decomposing organic matter in the absence of oxygen. Without oxygen, organic matter is broken down in this process, producing a mixture of gases that may be used for a variety of tasks, such as heating, cooking, and producing power. In contrast to conventional fossil fuels, biogas is economical and sustainable. Additionally, it may be produced from waste products like animal manure and agricultural wastes, which has considerable economic advantages. Due to its capacity to lower greenhouse gas emissions and solve climate change challenges, biogas has grown in popularity. To find the most effective source of biogas, scientists are constantly studying different types of bacteria and organic waste. The biologists can receive assistance from technicians to expedite the development of this field. Assistance can be provided by enhancing the laboratory equipment to make them more intelligent, user-friendly, and productive, which is the focus of this research endeavour. This study's state-of-the-art is an Automatic Methane Potential Test System currently utilised in laboratories and available for purchase. This project aims to redesign the blending mechanism of the Automatic Methane Potential Test System. The system is designed to operate independently using CAN communication and an edge device (a smartphone) that connects to the system via Bluetooth. The application for smartphones is designed to communicate with a master controller using Bluetooth Classic to send and receive data. Which, in turn, uses CAN-bus to interact with 18 bioreactors remotely. The TMC5130 stepper motor controller is utilised in this project, offering cutting-edge characteristics that meet the project's needs. The system's components have each been individually tested on a prototype. The result is encouraging and shows that, with modest adjustments, the conceptual design might one day successfully replace the current system.
|
45 |
Χρήση της διεπαφής OBD-II για τη διάγνωση βλαβών και τη λήψη δεδομένων τηλεμετρίας σε αυτοκίνητα / Using OBD-II interface for fault diagnosis and telemetry data collection for carsΑθανασόπουλος, Κωνσταντίνος 06 December 2013 (has links)
Στην παρούσα διπλωματική αναπτύσσεται συσκευή ανάγνωσης των δεδομένων του διαύλου CAN (CAN - controller area network - bus) με σκοπό τη λήψη δεδομένων για την τεχνική διάγνωση βλαβών και τη λήψη δεδομένων τηλεμετρίας σε πραγματικό χρόνο. Η διεπαφή μπορεί να χρησιμοποιηθεί για την εξαγωγή δεδομένων που βοηθούν στην έγκαιρη διάγνωση βλαβών πριν αυτές εξελιχθούν σε κοστοβόρες, στη μελέτη της λειτουργίας του αυτοκινήτου σε πραγματικό χρόνο για την επιβεβαίωση της καλής λειτουργίας του ή για τη συγκέντρωση στοιχείων για τη βελτίωση των επιδόσεών του κλπ. Στα πλαίσια της διπλωματικής, υλοποιείται συσκευή ανάγνωσης η οποία χρησιμοποιεί τα πρωτόκολλα επικοινωνίας που υποστηρίζονται από τη διεπαφή OBD-II ώστε να συλλέγει δεδομένα από τους διαύλους αυτοκινήτων και να τα αποστέλλει σε συνοδευτικό λογισμικό το οποίο αναλαμβάνει την παρουσίασή τους και την περαιτέρω επεξεργασία τους για την εξαγωγή χρήσιμων πληροφοριών και συμπερασμάτων. / In this thesis a scan tool is developed for vehicles' CAN buses (CAN - controller area network - bus) in order to obtain data for fault diagnosis and receiving telemetry data in real time. The interface can be used to export data to help in diagnosing faults before they become costly, to study the function of the car in real time, to confirm proper operation or to gather data for improving performance etc. In this thesis an OBD scanner is developed that uses the communication protocols supported by OBD-II interface in order to collect data from car buses and sends it to a bundled software for presentation and further processing for extracting useful information and draw further conclusions.
|
46 |
Implementation of a Dual-Active-Bridge Bidirectional Isolated DC to DC Converter in Home Area NetworkLo, Sheng-Chieh 13 September 2012 (has links)
In recent years, smart gird has received much attention, and many researchers have devoted to home area network (HAN) to improve the efficiency of grid. This thesis proposes a bidirectional isolated DC-DC converter (Dual Active Bridge, DAB) with phase shift control to implement the concept of HAN. Li+Fe battery is used as storage device of the converter, and a bidirectional communication between Laboratory Virtual Instrumentation Engineering Workbench (LabVIEW) and Digital Signal Processor (DSP) is realized by CAN-bus. By setting the current command given by LabVIEW system, the converter is able to charge the Li+Fe battery with constant current and constant voltage method as well as discharge the Li+Fe battery with constant current. Operation principle of the converter and the associated loss are presented.
|
47 |
Uma arquitetura distribu?da de hardware e software para controle de um rob? m?vel aut?nomoBritto, Ricardo de Sousa 25 January 2008 (has links)
Made available in DSpace on 2014-12-17T14:55:05Z (GMT). No. of bitstreams: 1
RicardoSB.pdf: 513523 bytes, checksum: a7e284b7570e2b02e306ed0d667aab6c (MD5)
Previous issue date: 2008-01-25 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / In this work, we present a hardware-software architecture for controlling the autonomous mobile robot Kapeck. The hardware of the robot is composed of a set of sensors and actuators organized in a CAN bus. Two embedded computers and eigth microcontroller based boards are used in the system. One of the computers hosts the vision system, due to the significant processing needs of this kind of system. The other computer is used to coordinate and access the CAN bus and to accomplish the other activities of the robot. The microcontroller-based boards are used with the sensors and actuators. The robot has this distributed configuration in order to exhibit a good real-time behavior, where the
response time and the temporal predictability of the system is important. We adopted the hybrid deliberative-reactive paradigm in the proposed architecture to conciliate the
reactive behavior of the sensors-actuators net and the deliberative activities required to accomplish more complex tasks / Neste trabalho ? apresentada uma arquitetura de hardware e software para controle do rob? m?vel aut?nomo Kapeck. O hardware do rob? Kapeck ? composto por um conjunto de sensores e atuadores organizados em um barramento de comunica??o CAN. Dois computadores embarcados e oito placas microcontroladas foram utilizadas no sistema. Um dos computadores foi utilizado para o sistema de vis?o, devido ? grande necessidade de processamento deste tipo de sistema. O outro computador foi utilizado para coordenar e acessar o barramento CAN e realizar as outras atividades do rob?. Placas
microcontroladas foram utilizadas nos sensores e atuadores. O rob? possui esta configura??o distribu?da para um bom desempenho em tempo-real, onde os tempos de resposta e
a previsibilidade temporal do sistema s?o importantes. Foi seguido o paradigma h?brido deliberativo-reativo para desenvolver a arquitetura proposta, devido ? necessidade de aliar o comportamento reativo da rede de sensores-atuadores com as atividades deliberativas necess?rias para realizar tarefas mais complexas
|
48 |
Translation of CAN Bus XML Messages to C Source CodeAndersson, Gustav January 2020 (has links)
The concept of translating source code into other target programming languages is extensively used in a wide area of applications. Danfoss Power Solutions AB, a company located in Älmhult, strives to streamline their way of software development for microcontrollers by implementing this idea. Their proprietary software tool PLUS+1 GUIDE is based on the CAN bus communication network, which allows electronic control units to share data represented in the XML format. Due to compatibility problems, the application in the electronic control units requires this data to be translated into the source code in the low-level C programming language. This thesis project proposes an approach for facilitating this task by implementing a source-to-source compiler that performs the translation with a reduced level of manual user involvement. A literature review was conducted in order to find the existing solutions relevant to our project task. An analysis of the provided XML input files was thereafter performed to clarify a software design suitable for the problem. By using a general XML parser, a solution was then constructed. The implementation resulted in a fully functional source-to-source compiler, producing the generated C code within a time range of 73–85 milliseconds for the input test files of typical size. The feedback received from the domain experts at Danfoss confirms the usability of the proposed solution.
|
49 |
Data tampering in Vehicle CAN Bus networksArapantonis, Elpidoforos January 2019 (has links)
The paradigm of the automotive industry has changed, over the course of the last10-15 years. Electronics and software, have introduced in many dierents parts ofa vehicle and the drive-by-wire it is taking over the vehicle functions. Connectivityfunctionalities are increasing in the context of the automotive industry as well. Allthe aforementioned parts have more than one common link. This thesis project willfocus on one of these links, which is the security. The focus will be the CAN busprotocol and specically, on investigating the implications of an adversary havingphysical access in a vehicle. An experiment will be contucted as part of this thesiswork, by using open source hardware (Arduino and Raspberry Pi) and a Man-inthe-middle (MITM) attack scenario, will be implemented. The application, whichwill perform the MITM attack (small scale CAN bus fuzzer) will be developedduring this project and it will be distributed as an open source software afterwards.
|
50 |
Aktivní aerodynamické prvky osobních vozidel / Active aerodynamic components of road vehiclesStiborová, Dana January 2017 (has links)
In this diploma thesis active aerodynamic components are designed, specifically brake cooling duct and active automotive wing. Cooling duct prototype and also active regulation controlling electronics including the software were created. Road test was performed to measure the duct parameters. Construction design and the active regulation function of the automotive wing were created. The influence of the wing on aerodynamic characteristics of the car was determined.
|
Page generated in 0.0531 seconds