151 |
Carregamento lateral em fundações profundas associadas a solos tratados : concepção, provas de carga e diretrizes de projeto / Laterally loaded deep foundations associated with treated soils: conception, load tests and design guidelinesFaro, Vitor Pereira January 2014 (has links)
As obras de engenharia atuais envolvem unidades estruturais de grande porte cujo projeto e execução devem ser cuidadosamente observados. Devido à complexidade das cargas e solicitações estruturais, as metodologias de projeto devem atender a necessidades específicas. A variabilidade geotécnica associada à diversidade de carregamentos, impõe a necessidade de desenvolvimento de metodologias aplicadas especificamente a projetos de fundações que serão sujeitas a carregamentos laterais, tais como pontes, obras portuárias, torres de linhas de transmissão, aerogeradores (onshore e offshore) e plataformas (offshore e nearshore) de exploração de petróleo e gás natural. Existem alguns métodos relatados na literatura geotécnica para projeto de fundações submetidas a esforços horizontais. Nenhum destes métodos considera uma solução baseada no simples reforço, através de técnicas de cimentação, dos solos na sua camada superficial, radial à estaca. Dessa forma, procura-se na presente pesquisa estudar o comportamento de fundações profundas com reforço do solo na sua camada superficial, sujeitas a carregamentos horizontais. São apresentadas diretrizes de projeto, estabelecendo-se ainda um modelo de previsão da capacidade de carga de fundações profundas submetidas a este tipo de carregamentos. Ensaios em campo experimental e simulações numéricas tridimensionais, usando o Método dos Elementos Finitos foram realizados, por forma a se obter uma melhor compreensão do comportamento de estacas carregadas lateralmente. Considerando o diâmetro da estaca (D) e a sua profundidade (L), no campo experimental, foram definidas razões L/D representando o comportamento de estacas rígidas e flexíveis. Diversos ensaios de carregamento horizontal foram realizados para estas relações L/D, em solo natural e com solo melhorado radial às estacas. As análises numéricas consistiram numa análise paramétrica onde foram variados parâmetros geométricos (da estaca e do solo tratado) e geotécnicos, necessários à caracterização dos materiais no modelo utilizado, o de Mohr-Coulomb. O modelo de previsão proposto foi obtido com base na análise dos resultados de simulações numéricas usando o software ABAQUS®, validados com provas de cargas no campo experimental. É também de salientar que nesta pesquisa apenas será considerada a ruptura geotécnica, pelo que é assumido que as estacas têm comportamento elástico. Do estudo realizado pode-se concluir que o uso de uma camada superficial de solo tratado radial à estaca melhora significativamente o desempenho do sistema, aumentando a sua capacidade de carga e diminuindo a sua deformação, mostrando ser uma ótima e promissora alternativa para fundações profundas sujeitas a carregamentos horizontais. / Current engineering works typically envolve large structural units whose design and implementation should be closely observed. Due to the complexity of the loads and structural needs, the design methodologies should comply specific requirements. The geotechnical variability combined with the loads diversity imposes the need to develop methodologies applied specifically to projects whose foundations will be laterally loaded, like bridges, harbors, transmission line towers, onshore and offshore wind turbines, among others. There are several methods reported in geotechnical literature to design piles that will be subjected to horizontal loads. However, none of these methods consider a solution based on a simple soil reinforcement using cementation techniques, in a superficial layer, radial to pile. The main goal of this research is to study the behavior of deep foundations with a reinforced soil system, subjected to lateral loads. Design guidelines are presented, leading to a model that predicts the ultimate load capacity of deep foundations subjected to these types of efforts. Field tests and tridimensional numerical simulations using the Finite Element Method were performed in order to achieve a better understanding of the behaviour of laterally loaded piles. Considering the pile diameter (D) and its depth (L), different L/D ratio were defined, corresponding to rigid and flexible piles. Using these L/D ratios, in both natural and reinforced soils, numerical and field tests were performed to provide experimental evidences of its behaviour. Numerical tests consisted in a parametric analysis where different geometric (pile and treated soil) and geotechnical parameters, necessaries to the Mohr-Coulomb model, have been modified. The proposed prediction model is based on the analysis of the numerical simulations results, using ABAQUS® software, validated with the field tests. It is important to point that in this study only geotechnical rupture is considered. Therefore it is assumed that piles have elastic behaviour. Has been concluded that the use of a superficial treated layer, radial to pile, considerably improves the system performance, increasing the lateral load capacity and decreasing their deformation, showing that this technique could be a promising solution to deep foundations subjected to horizontal loads.
|
152 |
Estudo geoarquiológico dos níveis arenoso e de cascalheira cimentada por concreção carbonática do Sítio Lagoa Uri de Cima, Salgueiro-PE.MACEDO, Andréia Oliveira 04 March 2016 (has links)
Submitted by Fabio Sobreira Campos da Costa (fabio.sobreira@ufpe.br) on 2016-10-14T13:19:47Z
No. of bitstreams: 2
license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5)
DISSERTAÇÃO ANDRÉIA MACEDO.pdf: 14642972 bytes, checksum: 83c5e27682e0c794cdc2fdfbc0065ad7 (MD5) / Made available in DSpace on 2016-10-14T13:19:47Z (GMT). No. of bitstreams: 2
license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5)
DISSERTAÇÃO ANDRÉIA MACEDO.pdf: 14642972 bytes, checksum: 83c5e27682e0c794cdc2fdfbc0065ad7 (MD5)
Previous issue date: 2016-04-04 / CAPES / A presente pesquisa constitui uma investigação geoarqueológica sobre a Lagoa Uri de Cima, localizada no município de Salgueiro-PE, abordando três escalas de análise: a escala macro, representada pelo ambiente da Lagoa, a escala meso, pela sequência estratigrafia dos sedimentos que preencheram a Lagoa, com cronologias LOE de 34.600±690 anos AP até 3.500±360 anos AP e a escala micro formada especificamente pelos dois níveis mais profundos da Lagoa, o de cascalheira cimentada por concreção carbonática, que constitui um calcrete e, pelo nível arenoso sobreposto a cascalheira. O nível de cascalheira foi estudado de forma amostral, através de microescavações de detalhe associadas às análises tafonômicas, granulométricas, de difratometria e fluorescência de raios X, datação por C-14 e isótopos do carbono da matéria orgânica do solo, enquanto para o nível arenoso foram realizadas análises granulométricas e a difratometria de raios X. Os resultados das análises do presente estudo, integrados aos dados de pesquisas anteriores, permitiram contextualizar os vestígios arqueológicos e paleontológicos encontrados nos níveis mais antigos da Lagoa, verificar os tipos de fossilização, demonstrar a coexistência dos grupos humanos com a paleofauna, há pelos menos 18 mil anos AP no Nordeste do Brasil e obter dados sobre o processo de instalação de um clima semiárido na região. / This research is a geoarchaeologycal study about Lagoa Uri de Cima, situated in Salgueiro county, state of Pernambuco. The methodological approach was built through three scales of analysis: the macro scale, represented by the lagoon environment, the meso scale composed by the stratigraphy sequence of the sediments that filled the pond, with ages since 34,600 ± 690 years BP until 3500 ± 360 years BP and, the micro scale formed specifically by the two deepest layers of the lagoon, the gravel layer cemented by carbonate concretion, which formed a calcrete and the sandy layer deposited above the gravel. The gravel layer was studied through the microdetailed excavation in laboratory of the concretion samples associated with taphonomical analysis, granolometric analysis of the sediments, diffraction and fluorescence of X- rays, C-14 dating and carbon isotopes of the soil organic material analysis, while for the sandy layer were conducted granolometric analysis of the sediments and the diffraction and fluorescence of X- rays. The results of this studies were integrated with previous survey data, that allowed contextualize the archaeological and paleontological remains that were found in the earliest sediments layers of the pond and also know the fossilization process, demonstrate coexistence between the human groups with paleofauna, at least 18,000 years BP and obtain data about the process of semi-arid climate installation in the region northeastern of Brazil.
|
153 |
Élaboration de carbures cémentés à gradient de propriétés par procédé d’imbibition réactive : Application aux inserts WC-Co et aux taillants en diamant polycristallin pour le forage pétrolier en conditions sévères / Functionally graded cemented carbides elaboration by reactive imbibition process : Application for WC-Co inserts and PDC cutters for oil drilling in harsh conditionsTher, Olivier 16 December 2014 (has links)
Dans l'industrie du forage pétrolier, les conditions de travail de plus en plus sévères requièrent sans cesse de nouveaux outils plus résistants à l'usure abrasive et à l'impact. Afin de répondre à ce défi, les travaux présentés ici, ont pour but l'élaboration de matériaux en carbure cémenté à gradient de composition par le procédé d'imbibition réactive. Ce procédé peut être décomposé en deux procédés de gradation, à savoir : l'imbibition et le revêtement réactif. L'imbibition a pour rôle d'enrichir graduellement, en phase liante, le coeur d'une pièce en carbure cémenté dense et repose sur le principe de migration de phase liquide dans un corps solide-liquide. Le revêtement réactif est un procédé qui s'applique également sur un carbure cémenté dense sur lequel est déposé un revêtement de nitrure de bore. Après avoir atteint le liquidus de la phase liante du carbure cémenté, une précipitation de borures ternaires prend place à la surface du matériau et s'étend graduellement sur des distances millimétriques. Dans le cas de pièces industrielles (inserts tricône et supports de taillants PDC (Polycrystalline Diamond Compact)), le traitement d'imbibition réactive permet de générer des gradients de dureté pouvant atteindre 450 HV sur 25 mm. L'élaboration de tels gradients a nécessité une meilleure compréhension des cinétiques ainsi que des phénomènes mis en jeu durant l'imbibition et le revêtement réactif. Dans le cas des taillants PDC, l'influence des paramètres du procédé HPHT de synthèse de la plaquette diamantée, sur le gradient de composition présent dans le support WC-Co après imbibition réactive, a été étudiée. Ces travaux se sont également intéressés à l'effet de ces gradients de composition sur les propriétés des plaquettes diamantées ainsi obtenues. A la suite d'essais mécaniques, les inserts WC-Co et taillants PDC gradués montrent une augmentation significative de leur résistance à l'abrasion (de 30 à 100%) et de leur tenue à l'impact (de 20 à 40%). / In oil drilling industry, harsher working conditions require ever new and more abrasive wear and impact resistant tools. To meet this challenge, the work presented here, is to develop graded cemented carbide materials by reactive imbibition process. This method can be divided into two gradation processes, namely, reactive coating and imbibition. Imbibition gradually enriches the core of dense cemented carbide with binder phase and is based on the principle of liquid phase migration in a solid-liquid body. Reactive coating also takes place in dense cemented carbide on which a boron nitride coating is deposited. After reaction with the WC-Co liquid binder, some ternary boride precipitations take place from surface to several millimeters deep. For industrial parts (inserts for roller cone bits and PDC (Polycrystalline Diamond Compact) cutters substrates), hardness gradients obtained can reach 450 HV on 25 mm. Such gradients development is passed through a better understanding of kinetics and phenomena occurring during imbibition and reactive coating. In case of PDC cutters, influence of HPHT process parameters, allowing diamond table synthesis, on the WC-Co substrate gradient, generated by reactive imbibition, was studied. This work was also interested in gradient effect on the obtained diamond tables properties. After mechanical tests, graded WC-Co inserts and graded PDC cutters show a significant increase of both wear resistance (from 30 to 100%) and impact resistance (from 20 to 40%).
|
154 |
ICME guided development of cemented carbides with alternative binder systemsWalbrühl, Martin January 2017 (has links)
The development of alternative binder systems for tungsten carbide (WC) based cemented carbides has again become of relevance due to possible changes in EU regulations regarding the use of Cobalt (Co). A framework for the ICME (Integrated Computational Materials Engineering) based Materials Design is presented to accelerate the development of alternative binder systems. Part one of this work deals with the design of the cemented carbide composite hardness. It has been shown that the intrinsic binder hardness is comparable to a bulk metal alloy and that based on the binder solubilities a solid solution strengthening model developed in this work can be employed. Using a method presented in this work the non-equilibrium, frozen-in binder solubilities can be obtained. Both the design of the binder phase and composite hardness is presented based on a general Materials Design approach. Part two deals with a multiscale approach to model the surface gradient formation. The experimentally missing data on liquid binder diffusion has been calculated using AIMD (Ab initio Molecular Dynamics). The diffusion through the liquid cemented carbide binder has to be reduced to an effective diffusion value due to the solid carbides acting as obstacles that increase the diffusion path. The geometrical reduction of the diffusion has been investigated experimentally using the SIMS (secondary ion mass spectroscopy) technique in WC-Nickel-58Nickel diffusion couples. The geometrical contribution of the so-called labyrinth factor has been proven by the combination of the experiments and in conjunction with DICTRA simulations using the precise liquid AIMD diffusivities. Unfortunately, despite the improved kinetic database and the geometrical diffusion reduction, the surface gradient formation cannot be explained satisfactory in complex cemented carbide grades. Additional, but so far unidentified, contributions have to be considered to predict the surface gradient thickness. / <p>QC 20170919</p>
|
155 |
Influência do orifício de acesso ao parafuso do intermediário do implante na resistência de infraestruturas de zircônia estabilizadas por ítrio e dissilicato de lítio / Influence the access hole to screw the implant in the intermediate resitance of infrastructure zirconia stabilized by yttrium and lithium disilicateWilliam Bogard de Souza e Silva 01 June 2014 (has links)
Hipótese do trabalho: Avaliar a presença de um orifício de acesso ao parafuso do intermediário do implante em infra-estruturas cimentadas sobre o pilar de titânio. Objetivo: O presente estudo visou comparar resistência a compressão de infra-estruturas em zircônia estabilizada por ítrio e em dissilicato de lítio cimentadas sobre pilar em titânio, com e sem acesso ao parafuso. Método: Foram confeccionados quarenta corpos-de-prova compostos por análogos de implantes hexágono externo de plataforma 4,1mm, intermediários de titânio pré-fabricado para próteses cimentadas e infra-estruturas para coroas totais. Os corpos-de-prova foram divididos em quatro grupos experimentais, sendo vinte, em cerâmica de zircônia estabilizada por ítrio(G1 e G2) e vinte em cerâmica de dissilicato de lítio(G3 e G4), todas confeccionadas com a mesma anatomia, ambas para próteses cimentadas sobre implante. Das vinte infra-estruturas de cada tipo de cerâmica, dez foram infra-estruturas convencionais para coroas cimentadas, constituindo o grupo controle e dez apresentavam um orifício de acesso ao parafuso, transpassando a cerâmica, constituindo o grupo experimental. As cimentações foram efetuadas com agente de fixação RelyX U200, de acordo com as especificações do fabricante, e o grupo experimental (com acesso ao parafuso) teve o orifício de acesso ao canal restaurado com resina composta foto ativada Z350 Filtek Supreme XT. Os corpos-de-prova foram submetidos a teste de compressão com velocidade de 0,5mm/minuto em máquina de ensaio universal. Resultados: Não foram encontradas diferenças estatísticas significativas entre infra-estruturas de cerâmicas convencionais e as infra-estruturas confeccionadas com orifício de acesso oclusal(G2 1.675 N/cm., G3 1.931 N/cm e G4 1.447 N/cm), exceto as infra-estruturas convencionais de zircônia estabilizada por ítrio que se apresentou superior aos demais(G1 3.372 N/cm). Com base nos resultados todas as modalidades de infra-estruturas testadas são viáveis para o uso clínico. / Hypothesis of work: To evaluate the presence of an access hole to screw the intermediate cemented implant in infrastructure over the titanium abutment. Objective: This study aimed to compare the compressive strength of infrastructure in yttrium stabilized zirconia and lithium disilicate cemented to abutment in titanium, with and without access to the screw. Method: Forty bodies-specimens consisting of similar external hex implants platform 4.1mm, intermediate titanium prefabricated for cemented prostheses and infrastructures for crowns were fabricated. The bodies-specimens were divided into four experimental groups, twenty, ceramic yttrium stabilized zirconia (G1 and G2) and twenty in ceramic lithium disilicate (G3 and G4), all made with the same anatomy, both for cemented prostheses on implants. Infrastructure of twenty of each type of tile ten were conventional infrastructure for cemented crowns, constituting the control group and ten had an access hole to the screw, trespassing ceramics, constituting the experimental group. The cementation were performed with RelyX U200 fixing agent, according to the manufacturers specifications, and the experimental group (with access to the screw) had the access hole channel restored with composite resin Z350 photo activated Filtek Supreme XT. The bodies-specimens were subjected to compression test speed of 0.5 mm / min in a universal testing machine. Results: No statistically significant differences between conventional ceramic infrastructure and infrastructure made with port access were found occlusal (G2 1675 N / cm, G3 1931 N / cm and G4 1447 N / cm.) Except conventional infrastructure stabilized zirconia yttrium who introduced himself superior to the others (G1 3300 N / cm). Based on the results of all modalities tested infrastructure are feasible for clinical use.
|
156 |
Zvýšení životnosti náhradních dílů strojů zpracujících půdu / Service life increasing of spare part tools for ground cultivationČernín, Jiří January 2019 (has links)
This diploma thesis deals with increasing the service life of parts intended for soil cultivation. The work evaluates the current possibilities of increasing the utility value of spare parts. Practical tests will provide recommendations for the most appropriate method to increase durability. The work examines uncharted methods of testing soldered joint. The results are evaluated in terms of quality and economic profitability. All results from this work are based on the basis of practical tests of plowing machine in rocky soil.
|
157 |
Optimalizace použití břitových destiček na lince plášťů / Optimization of indexable inserts use in production lineKocúrek, Ondřej January 2009 (has links)
This thesis deals with a summary of different types and characteristics of coatings used for increasing the lifetime of cemented carbide tools. Besides, the thesis includes solving the issue regarding edge chipping during machining interrupted pipe ends at the pipe line, selecting a new type of indexable inserts and indexable inserts holders to increase line productivity and decrease tool costs in the related operation.
|
158 |
Analýza dokončovacích způsobů obrábění / Analysis of complete method machiningPavézka, Vladimír January 2011 (has links)
This eleborate study is aimed at analysis of complete methods machining. There are characterized particular methods and their effect on the surface´s quality of machined area in this study. Concluding part of the study includes practical demonstration of machining by using cemented carbide-tipped tool and polycrystalline diamond and evaluation of this demonstration.
|
159 |
Metody povlakování řezných nástrojů / Coating methods for cutting toolsTuna, Jaroslav January 2012 (has links)
This diploma thesis is aimed on methods of the coating cutting material (cemented carbide, cermets, cutting ceramic, super hard materials) and evalutation individual method regarding technological posibilities of deposition of hard coatings a their mechanical, thermal and che-mical properties. The task of the work is full elaboration obtained technical knowledges and mainly evalutation a comparison of the work conditions (kind of the cutting materials, cutting conditions) that selected producers recomended for effective turning aplications of the coa-tings cutting materials.
|
160 |
Analyse multifactorielle de la dérive vers l'usure des outillages de frappe à froid / Multifactorial analysis of cold forging tools deteriorating toward wearDebras, Colin 21 July 2016 (has links)
Les matrices en carbure de Tungstène et Cobalt (WC‐Co) sont utilisées dans les procédés de frappe à froid de l’acier pour leur exceptionnelle capacité à résister aux phénomènes d’usure. Ces travaux ont pour objectif de mieux comprendre les mécanismes complexes qui entrainent finalement la dérive des matrices vers l’état usé. Cette complexité vient des liens étroits entre la microstructure et les propriétés mécaniques macroscopiques de ces matériaux. Pour la compréhension des mécanismes de dérive vers l’usure, une stratégie de travail en quatre étapes est établie. La première étape est le prélèvement de matrices de frappe, avec différentes durées de vie, directement sur la chaîne de production. La deuxième étape est l’identification de la rhéologie. Elle s’accompagne de la modélisation numérique du procédé de frappe pour calculer le champ des contraintes et des déformations plastiques. La troisième étape est la caractérisation localisée de l’évolution de la surface selon trois axes : les propriétés tribologiques, morphologiques, et mécaniques. On quantifie ainsi la dégradation progressive des conditions de contact corrélée avec une fragilisation des surfaces et la décohésion de grains de carbures WC. Pour comprendre les mécanismes qui conduisent à la décohésion de grains, une stratégie de modélisation numérique à l'échelle mésomécaniques 2D est mise en place. L’énergie de rupture entre un grain et le reste du matériau est modélisée par des éléments cohésifs. Ces modèles montrent que la sensibilité de chaque grain à l’arrachement dépend non seulement des conditions de contact et de la ténacité du matériau, mais également de la taille et de la configuration du grain au voisinage de la surface. / Tungsten carbide and Cobalt (WC‐Co) dies are used for cold forming processes of steel because of their exceptional performances in resisting wear phenomena. This work aims to a better understanding of the complex damage mechanisms that eventually cause wear. This complexity comes from the existing relationships between their microstructure and their macroscopic mechanical properties. For a better understanding of the damage mechanisms leading towards wear, a four‐step strategy is presented. The first step is the cold heading dies sampling directly on the production line. They are collected at different lifetimes. The second step is the identification of the die rheology. It is followed by numerical modeling of the forging process to calculate the stress field and plastic strain magnitude. The third step is to characterize the local evolution of the surface properties along three axes: the tribological, the morphological and mechanical aspects. These analyses quantify the progressive decrease of contact conditions correlated with surface embrittlement and WC carbide grains debonding. To understand the mechanisms that lead to the grains debonding, a set of 2D mesoscale contact models are performed. The fracture energy between a WC grain and the rest of the material is computed using cohesive elements. These models show that the sensitivity to debonding depends not only on the contact conditions and the material fracture toughness, but also on the grain size and grain configuration in the vicinity of the surface.
|
Page generated in 0.0738 seconds