No description available.

Astrophysikalische Jets sind ausgedehnte, kollimierte Massenausflüsse von verschiedenen astronomischen Objekten. Zeitabhängige magnetohydrodynamische (MHD) Simulationen der Jet-Entwicklung müssen den Akrretionsprozess in der Scheibe berücksichtigen, da der Jet aus der Scheibenmaterie gespeist wird. Allerdings ist die simultane Berechnung der Entwicklung von Scheibe und Jet schwierig, da die charakteristischen Zeitskalen unterschiedlich sind. Selbstähnliche Modelle zeigten, daß eine Beschreibung der Jetentstehung aus einer Akkretionsscheibe durch rein magnetische Prozesse möglich ist. / In this thesis the magnetohydrodynamic jet formation and the effects of magnetic diffusion on the formation of axisymmetric protostellar jets have been investigated in three different simulation sets. The time-dependent numerical simulations have been performed, using the magnetohydrodynamic ZEUS-3D code.

This thesis reports on the findings of an investigation into the dosimetry resulting from the abutment of en face 6 MeV electron and 6 MV photon beams as applied to the clinical challenge of radiation therapy treatments to head and neck cancer sites. Particular concern is given to the use of multi-leaf collimator (MLC) technology for photon beam definition when abutted to extended source-to-surface (SSD) electron beams. We made dosimetric comparison between MLC and Cerrobend® shielding for use in an abutment situation. The effects of extending the SSD of the electron beam were also assessed. We checked the ability of a Pinnacle3 v7.6 treatment planning system (TPS) to correctly model the dosimetry resulting from this extended electron beam SSD. Volumetric simulations of composite dosimetry resulting in water were conducted in MATLAB® for variations of surface abutment gap, and photon beam shielding type and angle. Visualization Toolkit (VTK) script was developed to visualise the resulting dosimetry. The effect of extending the SSD of the electron beam increases the beam penumbra significantly, exacerbating the challenge of matching this field to a photon beam edge. Furthermore, the TPS was shown to inaccurately model the electron beam penumbra for the extended SSD conditions. The employment of MLC shielding provides for some advantages over Cerrobend® in terms of overall composite hotspot volumes and coldspot magnitudes, though introduces detrimental dosimetric inhomogeneities in the underlying volume. Distinctly, no combination of abutment gap and shielding variables resulted in dosimetry in the range of 90% to 110% at the depth of dmax for the beam energies considered here. We provided tabulated data across these variables to outline the trade-offs present, and aid clinical decisions regarding this challenging dosimetric

Rectangular collimation is used in dentistry to reduce radiation by restricting the x-ray beam to approximately the size of a number 2 intraoral film (3.2X4.1 cm). However, this restricted beam size can lead to exposure errors. The aim of this study was to retrospectively evaluate the number of radiographs exposed and the presence of technical errors by the use of traditional circular or rectangular collimators during endodontic therapy on simulated teeth in manikins. A total of 1475 digital radiographs of 84 teeth exposed by 60 dental students were evaluated. Evaluation was done by a board certified endodontist, an endodontic resident, and a dental student. Analysis of the different raters showed no significant differences among the three. Radiographs were randomized and blindly renamed. Repeated-measures mixed-model ANOVA was used to compare the number of radiographs exposed using the different collimators. Although not statistically significant (P<.05), there were 15% more radiographs taken with the rectangular collimator when compared to the circular collimator. Using a repeated-measures logistic regression, there was a significant difference of the proportion of radiographs with cone cuts (P = .0003) taken with a rectangular collimator (59%) compared to radiographs taken with a circular collimator (19%). There was no significant evidence for a collimator difference when considering missed apex (P = .0986) or missed apex due to a cone cut (P = .0631). In order to expose high quality radiographs avoiding cone cuts, a traditional circular collimator may be indicated for use during endodontic therapy.

<p>This work focuses on the construction and application of coded apertures to compressive X-ray tomography. Coded apertures can be made in a number of ways, each method having an impact on system background and signal contrast. Methods of constructing coded apertures for structuring X-ray illumination and scatter are compared and analyzed. Apertures can create structured X-ray bundles that investigate specific sets of object voxels. The tailored bundles of rays form a code (or pattern) and are later estimated through computational inversion. Structured illumination can be used to subsample object voxels and make inversion feasible for low dose computed tomography (CT) systems, or it can be used to reduce background in limited angle CT systems. </p><p>On the detection side, coded apertures modulate X-ray scatter signals to determine the position and radiance of scatter points. By forming object dependent projections in measurement space, coded apertures multiplex modulated scatter signals onto a detector. The multiplexed signals can be inverted with knowledge of the code pattern and system geometry. This work shows two systems capable of determining object position and type in a 2D plane, by illuminating objects with an X-ray `fan beam,' using coded apertures and compressive measurements. Scatter tomography can help identify materials in security and medicine that may be ambiguous with transmission tomography alone.</p> / Dissertation

Since their initial demonstration in 1994, quantum cascade lasers (QCLs) have become prominent sources of mid-infrared radiation. Over the years, a large scientific and engineering effort has led to a dramatic improvement in their efficiency and power output, with continuous wave operation at room temperature and Watt-level output power now standard. However, beyond this progress, new functionalities and capabilities need to be added to this compact source to enable its integration into consumer-ready systems. Two main areas of development are particularly relevant from an application standpoint and were pursued during the course of this thesis: wavelength control and wavefront engineering of QCLs. The first research direction, wavelength control, is mainly driven by spectroscopic applications of QCLs, such as trace gas sensing, process monitoring or explosive detection. We demonstrated three different capabilities, corresponding to different potential spectroscopic measurement techniques: widely tunable single longitudinal mode lasing, simultaneous lasing on multiple well-defined longitudinal modes, and simultaneous lasing over a broad and continuous range of the spectrum. The second research direction, wavefront engineering of QCLs, i.e. the improvement of their beam quality, is relevant for applications necessitating transmission of the QCL output over a large distance, for example for remote sensing or military countermeasures. To address this issue, we developed plasmonic lenses directly integrated on the facets of QCLs. The plasmonic structures designed are analogous to antenna arrays imparting directionality to the QCLs, as well as providing means for polarization control. Finally, a research interest in plasmonics led us to design passive flat optical elements using plasmonic antennas. All these projects are tied together by the involvement of Fourier analysis as an essential design tool to predict the interaction of light with various gratings and periodic arrays of grooves and scatterers. / Engineering and Applied Sciences

This thesis reports on the findings of an investigation into the dosimetry resulting from the abutment of en face 6 MeV electron and 6 MV photon beams as applied to the clinical challenge of radiation therapy treatments to head and neck cancer sites. Particular concern is given to the use of multi-leaf collimator (MLC) technology for photon beam definition when abutted to extended source-to-surface (SSD) electron beams. We made dosimetric comparison between MLC and Cerrobend® shielding for use in an abutment situation. The effects of extending the SSD of the electron beam were also assessed. We checked the ability of a Pinnacle3 v7.6 treatment planning system (TPS) to correctly model the dosimetry resulting from this extended electron beam SSD. Volumetric simulations of composite dosimetry resulting in water were conducted in MATLAB® for variations of surface abutment gap, and photon beam shielding type and angle. Visualization Toolkit (VTK) script was developed to visualise the resulting dosimetry. The effect of extending the SSD of the electron beam increases the beam penumbra significantly, exacerbating the challenge of matching this field to a photon beam edge. Furthermore, the TPS was shown to inaccurately model the electron beam penumbra for the extended SSD conditions. The employment of MLC shielding provides for some advantages over Cerrobend® in terms of overall composite hotspot volumes and coldspot magnitudes, though introduces detrimental dosimetric inhomogeneities in the underlying volume. Distinctly, no combination of abutment gap and shielding variables resulted in dosimetry in the range of 90% to 110% at the depth of dmax for the beam energies considered here. We provided tabulated data across these variables to outline the trade-offs present, and aid clinical decisions regarding this challenging dosimetric

No description available.

No description available.

This thesis covers the individual work of Michael Chin as part of the sponsored research project funded by the U.S. State Department in support of a computational design of a "Mobile Pit Verification System" (MPVS), a mobile “drive by” passive radiation detection system to be applied in special nuclear materials (SNM) storage facilities for validation and compliance purposes. The MPVS system is intended to enable a comprehensive, rapid verification and validation of stored nuclear weapon core physics packages containing SNM, or so-called “weapon pits,” in weapon materials and stockpile storage facilities. The MPVS platform is designed to move at a constant speed and accumulate a signal for each stored weapon pit container. The gamma detector was selected to be a 4 × 4 × 8 cubic inch CsI detector while the neutron detector array designed for the “Transport Simulation and Validation of a Synthetic Aperture SNM Detection System (“T-SADS”) project was used in conjunction with this work; T-SADS was a 3 year project funded by DOE-NNSA which was completed on May 2013. The computational design effort for this project was completed in April 2013, and leveraged novel computational radiation transport methods, algorithms, and SNM identification methods, including a synthetic aperture collection approach, and a new gamma ratio methodology for distinguishing between naturally occurring radiation materials and weapon class SNM materials. Both forward and adjoint transport methods were utilized to characterize the adjoint reaction rate as a function of inter-source spacing, collimation thickness, linear and angular field of view, source age, source type, source geometry, and mobile platform speed. The integrated count was then compared with background radiation and the associated probabilities of detection and false alarm were then computed. Publications resulting from this research were published in PHYSOR 2012, presented at the 53rd annual Proceedings of the INMM, and at the Mathematics & Computation 2013 Conference.