Global ETD Search

1	Effects of Storage on the Linear Viscoelastic Response of Polymer-Modified Asphalt at Intermediate to High Temperatures Reubush, Stacey Diane 09 January 2000 (has links) The design and construction of roads with longer service lives is a priority of civil engineers. The selection of appropriate highway materials with respect to climatic and loading conditions may significantly increase the lifespan of pavements. One material receiving interest in the area of improved roadway performance is polymer-modified binder. The complex behavior of polymer-modified binders, particularly over time, is not yet well-understood by engineers. Therefore, an experimental study was performed to determine the effects of four years of storage at room temperatures (23°C) on the dynamic mechanical properties of polymer-modified binders at intermediate and high temperatures. A typical paving grade (AC-20) and three elastomeric modifiers, each at three concentrations were used. Initial tests were performed in 1995 to evaluate the effects of short-term aging as simulated by the Rolling Thin Film Oven Test (RTFOT) procedure. This study encompasses a second phase of testing occurring after the modified binders were stored at ambient room temperature (23°C) for four years. The study found that significant changes affecting the dynamic response of binders occur during long term storage at a temperature of 23°C. These changes are dependent on the type and concentration of modifier and may be beneficial. Additionally, four mathematical models describing the dynamic response of binders were evaluated and found to be variable in their ability to accurately predict response of modified binders. Most of these models are not well suited for prediction of the response of stored binders. / Master of Science storage complex shear modulus Aging dynamic mechanical testing polymer-modified asphalt
2	Vliv etherů celulózy na reologické vlastnosti vápna / Influence of cellulose ethers on rheological properties of lime Hegrová, Michaela January 2018 (has links) The subject of this diploma thesis is a study of the influence of cellulose ethers on the rheological properties of lime. The theoretical part focuses on rheological parameters, techniques and test equipment used in rheology measurements. Various types of cellulose ethers and their influence on the rheological properties of fresh mortars are described. The practical part deals with the study of the influence of different types and quantities of cellulose ethers on the properties of fresh lime pastes and mortars. The results were obtained from measurements on a rotational rheometer with a special geometry for building materials. Measuring methods used were flow and oscillatory tests. Yield stress, viscosity and flow index were determined by the flow measurement. The stability and stiffness of fresh materials were determined during the oscillation measurements. The measured results are then evaluated and compared.
3	Vlastnosti nízkoteplotních polymerem modifikovaných asfaltů / Properties of polymer modified bitumen for warm mix asphalt Zábranský, Ivo January 2019 (has links) The Diploma thesis is focus on polymer modified bitumen for warm mix asphalt. The theoretical part of the thesis describes additives which influence the properties of bitumen for their use and reduction of production and service temperatures. Further, the theoretical part describes the conclusions from the researches. This part also describes empirical and functional tests of bituminous binders. The practical part presents the results of individual tests. Tests were performed on samples of non-aged, aged by RTFOT and RTFOT + PAV methods. The results of the work and the assessment of the suitability of bituminous binders are summarized at the end of the thesis.
4	Vliv druhu a dávky polymeru na vlastnosti modifikovaných pojiv / Influence of Dostál, Filip January 2020 (has links) The diploma thesis is focused on polymer modified binders with different polymer doses. The theoretical part describes the history of the use of bitumen, the extraction of bitumen from oil and behavious of the polymer type SBS/SB, which is used in the diploma thesis on modified binders. Further, the theoretical part describes the empirical and functional tests of bitumen binders. In the practical part the results of indidual tests are presented and compared with the standard ČSN 65 7222-1. At the end of the diploma thesis are summarized results of work and evaluation of binders with the best achieved properties.
5	Problematika stárnutí asfaltových pojiv a směsí / Ageing of asphalt binders and mixtures Štěpanovský, Vlastimil January 2015 (has links) Diploma thesis is particularly focused on ageing of asphalt mixtures and asphalt binders. In the theoretical part an array of methods simulating short term and long term ageing consequently is introduced. The main objective of the practical part was to carry out the long-term ageing test method BSA (Braunschweiger Alterung). Thereafter, specimens testing for stiffness properties according to CSN EN 12697-26 were made. After conducting the measurement on those, asphalt binder was extracted and processed to follow-up testing. The testing consisted of a range of methods – Penetration CSN EN 1426, Ring and Ball test CSN EN 1427, Determination of the Frass breaking point CSN EN 12593, Determination of complex shear modulus CSN EN 14770 and Dynamic viscosity using a dynamic shear rheometer (DSR). The given results were assessed in the last part in order to evaluate the rate of the binder degradation caused by the method BSA.
6	Reologické vlastnosti asfaltových pojiv / Rheological properties of asphalt binders Pěnčík, Michal January 2015 (has links) The Diploma thesis is focused on rheological properties of bituminous binders and mixtures. Above all, it describes the changes of these properties of samples of bituminous binders and mixtures. Those were brought by the process of laboratory aging, since it simulates the changes occurring in the in the real-life conditions. The theoretical part depicts the field of rheology and methods utilized for simulating the ageing of binders and mixtures. The practical part describes the process of preparation of samples and its testing. Firstly, the ageing of bituminous mixture by the means of BSA method (Braunschweiger Alterung) took place, which was followed by preparing the solids for testing the modulus of stiffness and main testing. The rest of the mixture was used for extracting the binder. Tests with the binder were focused on the usage of dynamic shear rheometer (complex shear modulus, dynamic viscosity). The last part of the work is dedicated to the comparison of the outcomes of testing.
7	Stárnutí asfaltových pojiv / Ageing of asphalt binders Střasáková, Monika January 2016 (has links) The theoretical part of this thesis describes the rheology of bituminous binders, aging of asphalt binders and laboratory methods simulating short and long term aging. The following describes an empirical tests (needle penetration, softening point ring ball method) and functional tests (complex shear modulus and phase angle, dynamic viscosity), which are performed in the dynamic shear rheometer. At the end of this section, laboratory aging of bituminous binders using method RTFOT and method RTFOT + PAV is described in more detail. In the practical part of this thesis, the results of all tests performed on the binders aged using RTFOT + PAV are introduced and compared with results of properties of non-aged binders and binders aged by 3xRTFOT.
8	Mechanische Relaxation in komplexen Fluiden / Mechanical relaxation in complex fluids Rösner, Peter 01 March 2004 (has links) No description available. Mathematics and Computer Science Relaxationsprozesse mechanische Relaxation Glas Glasübergang metallische Gläser amorphe Materialien mechanischer Verlust komplexer Schermodul Viskosität 530 Physik relaxation processes mechanical relaxation glas glas transition metallic glasses amorphous materials mechanical loss complex shear modulus viscosity 33.66
9	Reologické vlastnosti asfaltových pojiv / Rheological properties of asphalt binders Coufalík, Pavel Unknown Date (has links) Dissertation thesis is focused on rheological properties of asphalt binders and on changes of their performance during the lifetime in road structures. Aging processes of asphalt binders and methods of laboratory aging are described in the theoretical part of the thesis. Furthermore, basic rheological models and related test methods for the evaluation of asphalt binders are described. In the practical part, properties of asphalt binders are investigated after aging process and their performance is evaluated by empirical and functional test methods. The various methods of aging are compared with each other and a relationship between real conditions and laboratory aging is researched. In the next section, vacuum flashed cracked residue (VFCR) is added to the selected asphalt binders and their influence on rheological properties during description of aging of asphalt binders is investigated. The results were used in publication of two certified methodology under the title „The methodology for the evaluation of paving bitumen in terms of susceptibility to thermal oxidative aging“ and „The methodology describes laboratory aging of asphalt mixtures“. The results of the thesis are listed in the conclusion.
10	Dávkování oživovacích přísad do asfaltové směsi s vysokým obsahem R-materiálu / Dosage of rejuvenating agents to asphalt mixture with high content of RAP Čumíčková, Markéta January 2019 (has links) The diploma thesis is focused on the appropriate dosage of rejuvenating agents in asphalt mixtures with high content of RAP. The empirical and functional laboratory tests are described in the theoretical part. The practical part deals with the estimation of the optimal amount of rejuvenating agents by means of laboratory tests so that the rheological properties of the degraded asphalt binder can be restored by suitable dosing into the RAP. As part of the TAČR ZÉTA project, an experimental section of asphalt mixture containing 50 % of the RAP and an appropriate amount of the rejuvenating agents was created. The aim of the thesis is to find an optimal dosage of the rejuvenating agents in the samples of the RAP and laboratory aged asphalt binder of gradation 50/70, to determine the effectiveness of selected rejuvenating agents and to monitor changes in the parameters of the experimental section during the period of time.

Search results