Les barres de commande du futur démonstrateur de réacteur à neutrons rapides refroidi au sodium (RNR – Na) nommé ASTRID sont constituées de pastilles de B4C enfermées dans une gaine en acier inoxydable AIM1 (15Cr-15Ni-0,4Ti). En service, les pastilles de B4C sont plongées dans le sodium liquide à une température allant de 500 à 600 °C. Les retours d’expérience des RNR - Na ont mis en évidence que la durée de vie des barres de commande était limitée par leur cinétique de carburation. Cependant, un phénomène de boruration des gaines a été observé lors d’essais réalisés « hors réacteur / hors irradiation ». Afin de maîtriser la durabilité des barres de commandes, il est donc nécessaire d’évaluer précisément la nature de l’interaction entre les gaines en acier et le B4C dans le sodium liquide. Ainsi, deux campagnes d’essai ont été menées : 1. Trois aciers inoxydables (AIM1, 316L et EM10) ont été exposés dans du sodium liquide fortement carburant (ac > 1) à 500, 600 et 650 °C. 2. Les mêmes nuances d’aciers ont été exposées dans du sodium liquide contenant de la poudre de B4C en excès à 500 et 600 °C. La première campagne a été réalisée pour avoir une meilleure compréhension des mécanismes et des cinétiques de carburation des barres de commande. Tout d’abord, l’état de carburation a été caractérisé finement au moyen de différentes techniques d’analyse (microsonde de Castaing, diffraction des rayons X du rayonnement synchrotron, microscopie électronique en transmission). Ensuite, la cinétique de carburation a été simulée à l’aide d’un modèle analytique simplifié de la carburation puis grâce à un outil commercial plus complet de simulation numérique de la diffusion à l’équilibre thermodynamique (DICTRA). Des écarts ont été observés entre les simulations des états de carburation réalisées avec DICTRA et les mesures expérimentales (profil de concentration en carbone et population de carbures). Afin de prédire au mieux l’état de carburation des aciers rencontré à 500 et 600 °C, il a notamment été démontré qu’il est probablement nécessaire de prendre en compte la diffusion du carbone dans les joints de grains et un écart à l’équilibre thermodynamique entre le carbone piégé dans les carbures et le carbone dissout dans la matrice. La deuxième campagne expérimentale a concerné l’étude du système : acier – B4C – Na. Des caractérisations couplées à des études thermodynamique et cinétique ont permis de proposer un mécanisme de carburation et de boruration des aciers. Après la dissolution du B4C dans le sodium, deux phénomènes ont été observés. Le bore réagit avec les aciers pour former une couche duplexe de borures à la surface (MB, M2B) et des borures dans les joints de grains du substrat. La cinétique de formation de la couche de borures dans les aciers suit une loi parabolique. Le carbone entraine une légère carburation des aciers plus en profondeur et le degré de carburation des aciers s’est avéré constant entre 250 et 3000 h d’exposition, ce qui suggère que le phénomène de carburation s’opère probablement avant la formation d’une couche continue de borures. / Pellets of boron carbide, B4C, enclosed in AIM1 (15Cr-15Ni-0.4Ti) stainless steel tubes are constitutive materials of the control rods in the future French Advanced Sodium Technological Reactor for Industrial Demonstration (ASTRID). During reactor operation, the B4C pellets are immersed in liquid sodium in the temperature range 773-873 K. Based on the feedback from operation of former Sodium Fast Reactors (SFR), the lifetime of the control rods has been shown to be limited by their carburization kinetics. Although, boriding of the steels was observed in out-ofpile studies. In order to increase the lifetime prediction of the aforementioned components in service, detailed information on the chemical interaction between the steel and B4C in liquid sodium is required. As a result, two sets of out-of-pile experiments were conducted: 1. Three stainless steels (AIM1, 316L, EM10) were exposed to highly carburizing sodium (ac > 1) at 773, 873 and 923 K. 2. The same grades were exposed to high purity B4C powder in liquid sodium at 773 and 873 K. The first campaign was performed in order to have a better understanding of the carburization phenomenology and kinetics of the control rods. The extent of carburization was evaluated. A good description of the carburization kinetics was obtained by means of two models and a simulation tool (DICTRA). The limits of the simulation tools were exposed. It was shown that the grain boundary diffusion of carbon had to be taken into account. The second set of experiments was carried out in order to study the system: steel – B4C – Na. A thorough examination of the nature of the chemical interaction was performed. The characterizations were combined with a thermodynamic and kinetic study to propose a carburization and boriding mechanism. The B4C powder dissolved in liquid sodium and reacted with the steels to form a boride layer (MB and M2B) at the surface, borides in the grain boundaries and a carburized zone underneath. The growth kinetics of the boron affected zone was shown to be parabolic. The carburization depth did not evolve between 250 and 3000 h and suggested that this phenomenon occurred during a transient stage.

Incrementar a eficiência do processo de refrigeração do sêmen é de grande interesse na reprodução da espécie equina, à medida que a população de equinos cresce, também aumenta a demanda para a comercialização e transporte de sêmen refrigerado. Esse trabalho foi realizado para verificar os efeitos de diferentes diluidores para refrigeração de sêmen equino a 5°C sobre a cinética, membranas, morfologia e cromatina espermáticas durante 12 horas de armazenagem. Foram utilizados quatro ejaculados de quatro garanhões de diferentes raças, colhidos em intervalos semanais. Imediatamente após a colheita, o sêmen in natura foi avaliado quanto ao movimento espermático utilizando-se o sistema computadorizado de análise espermática (CASA), integridade das membranas plasmática e acrossomal e o potencial de membrana mitocondrial, utilizando-se sondas fluorescentes (PI, H342, FITCPSA e JC-1, por microscopia de epifluorescência), morfologia espermática por microscopia de contraste de interferência diferencial (DIC) e desnaturação da cromatina pela coloração de Azul de Toluidina. Logo após as análises, o sêmen foi diluído usando-se três diluidores diferentes: SMT, à base de leite desnatado e meio de Tyrode (adaptado de: PADILLA; FOOTE, 1991), BSAG, diluidor contendo BSA (adaptado de: GIBB et al., 2011) e SMK, à base de leite desnatado (KENNEY et al., 1975; controle), em seguida foi envasado em bisnagas na concentração de 50 x 106 sptz/mL e refrigerado a 5°C em caixas BotuFLEX® (Botupharma, Botucatu-SP), durante um período de 12 horas. O sêmen foi analisado 5 minutos após a diluição (T0), 4 (T4), 8 (T8) e 12 horas (T12) após a refrigeração quanto ao movimento espermático, integridade das membranas plasmática e acrossomal e o potencial de membrana mitocondrial, morfologia espermática e desnaturação da cromatina. A análise estatística foi realizada empregando-se o programa computacional Statistical Analysis System (SAS inst. Inc.). Para todas as variáveis foi utilizada a análise de variância (ANOVA). Para comparação das médias, foi utilizado o método de Tukey sendo considerado o nível de significância de 5%. Foram observadas interações entre tempo X tratamento para a maioria das características de cinética espermática. Dentre os efeitos encontrados dos diluidores, destaca-se que SMT e SMK foram superiores na preservação das motilidades total e progressiva e porcentagem deespermatozoides rápidos em detrimento ao diluidor BSAG. Quanto à preservação das membranas o diluidor SMT (56,6±18,7%) foi significativamente superior ao SMK (49,6±18,6%), que por sua vez foi superior ao BSAG (25,8±14,8%) quanto à porcentagem de espermatozoides com membranas plasmática e acrossomal íntegras e alto potencial mitocondrial (PIAIA). Comportamento semelhante foi observado para o percentual de membrana plasmática e de potencial de membrana mitocondrial. Contrariamente, a membrana acrossomal não foi afetada pela refrigeração do sêmen a 5ºC por até 12 horas independente do diluidor. Foi encontrado maior percentual de defeitos totais quando o sêmen foi refrigerado utilizando o diluidor BSAG (50±12,4%) do que SMT (42,6±11,2%) e SMK (41,8±12,4%). Quando se avaliou a cromatina espermática não foram notados efeitos do tempo de refrigeração nem dos diluidores; todavia, ao se comparar com o sêmen in natura notou-se um aumento no percentual de espermatozoides com desnaturação intermediária da cromatina após 12 horas de refrigeração a 5ºC com o diluidor BSAG. Conclui-se que a refrigeração do sêmen equino a 5ºC altera a cinética espermática de forma oscilante entre os diluidores no decorrer do tempo até 12 horas. Os diluidores SMT e o SMK preservam melhor a cinética, integridade de membranas e morfologia espermática do que o diluidor BSAG. / To develop the efficiency of cooling semen is the great advantage in the equine reproduction, as according to the equine population to grow up, too increase the demand to market and transport of cooling semen. This experiment was performed to verify the effects of different extenders to equine cooling semen at 5°C on the sperm kinetic, membranes, morphology and chromatin during 12 hours of storage. Were utilized four ejaculates from four stallions of different breeds, collected a week. Immediately after the collection, the in natura semen was evaluated as the sperm movement using the Computer-Assisted Semen Analysis (CASA), integrity of plasma and acrossomal membranes and mitochondrial membrane potential, using the fluorescent probes (PI, H342, FITC-PSA and JC-1, by epifluorescência microscopy), sperm morphology by microscopy of differential interference contrast (DIC) and chromatin denaturation by Toluidine blue. As soon as finished the analyses, the semen was diluted using three different extenders: SMT, skim milk based and Tyrode medium (adapted from PADILLA; FOOTE, 1991), BSAG, extender containing BSA (adapted from GIBB et al., 2011) and SMK, skim milk based (KENNEY et al., 1975; control), following was packed in flasks at 50 x 106sperm/mL concentration and cooling at 5°C in BotuFLEX® (Botupharma, Botucatu-SP) box, during 12 hours. The semen was analyzed 5 minutes after dilution (T0), 4 (T4), 8 (T8) and 12 hours (T12) after cooling about sperm movement, plasma and acrossomal membranes integrity and mitochondrial membrane potential sperm morphology and chromatin denaturation. The statistical analysis was performed using Statistical Analysis System (SAS inst. Inc.) software. To all variables was utilized the analysis of variance (ANOVA). To media comparison was utilized the Tukey method, considering the significant level at 5%. Were observed interactions between times X treatment to majority of sperm kinetic characteristic. Among the found effects of the extenders, it was detached that SMT and SMK were superior to preserve total and progressive motility and percentage of rapid sperm in detriment to BSAG extender. It about the membranes preservation the SMT extender (56.6±18.7%) was significantly superior to SMK (49.6±18.6%), which was superior to BSAG (25.8±14.8%) as percentage of sperm with plasma and acrossomal membranes integrity and high mitochondrial potential (PIAIA). Behavior similar was observed to the plasma membrane integrity and potential mitochondrial membrane percentage. Contrary, The acrossomal membrane was not affected by semen cooling at 5ºC until 12 hours independently of the extender. It was found major percentage of defect total to cooling semen using BSAG (50±12.4%) extender compared to SMT (42.6±11.2%) and SMK (41.8±12.4%). When evaluated the sperm chromatin were not found effect of the cooling time neither of the extenders; however, when compared to in natura semen notice an increase on the percentage of spermatozoa with moderate chromatin denaturation after 12 hours of cooling at 5ºC with BSAG extender. It was concluded that the equine semen cooling at 5ºC change the sperm kinetic oscillating way among extenders during the time until 12 hours. The SMT and SMK extenders are better to preserve the sperm kinetic, membranes integrity and morphology than BSAG extender.

Thesis. 1975. M.S.--Massachusetts Institute of Technology. Dept. of Civil Engineering. / Bibliography: leaves 124-129. / M.S.

Entre as biotécnicas da reprodução, a inseminação artificial (IA) é a que proporciona maior amplitude de resultados nos programas de melhoramento genético animal. A adequada seleção dos atributos produtivos e reprodutivos de fêmeas e principalmente dos machos é a base essencial para a maximização do potencial dessa técnica. O sêmen para IA pode ser fresco, fresco diluído, refrigerado e congelado. Os diluidores têm papel fundamental na expansão do volume seminal, permitindo seu fracionamento na preservação do sêmen no processo de refrigeração, eles devem ser atóxicos, ter pH e pressão osmótica compatíveis com a sobrevivência espermática, de baixo custo e fácil preparo. Sendo assim o objetivo deste trabalho foi avaliar a conservação de sêmen ovino resfriado com diluente de Kenney (K) ou diluente de Kenney mais gema de ovo (KG) por até 48 horas. Foram utilizados quatro carneiros, sendo feitas 40 colheitas. Logo após o sêmen era dividido em duas alíquotas uma com o diluente de K e outra alíquota com diluente de KG. As amostras foram resfriadas à 10ºC. As análises subjetivas usuais foram feitas nos tempos 0, 24 e 48 horas. Estas análises incluíram turbilhonamento, motilidade e vigor. Foram feitas também análises de testes funcionais como a avaliação da integridade das membranas plasmática e acrossomal através das colorações de eosina-nigrosina e técnica da coloração Fast Green / Rosa Bengala (POPE, 1991) respectivamente, avaliação da atividade citoquímica mitocondrial através da coloração de diaminobenzidina (DAB) e avaliação da susceptibilidade do espermatozóide ao estresse oxidativo através da avaliação dos níveis de substâncias reativas ao ácido tiobarbitúrico após a incubação com sistema gerador constituído de sulfato de ferro e ascorbato. Neste trabalho o tempo afetou significativamente a motilidade e o vigor espermático, caindo de 79,16±1,41 para 40,25±2,55 após 48hs e de 3,92±0,06, para 2,57±0,10 após 48hs respectivamente. O tempo influenciou também a integridade das membranas plasmática e acrossomal, fazendo com que houvesse uma queda gradativa nas integridades (0hs=95,75±0,36, 24hs=90,69±0,99, 48hs=86,11±1,45) e (0hs=90,34±0,80, 24hs=84,33±1,30, 48hs=76.67±1,69) respectivamente. Foi possível observar também que ao longo do tempo houve uma diminuição da atividade mitocondrial e um aumento nas espécies reativas ao ácido tiobarbitúrico (TBARS), que diferiu do tempo 0hs para o tempo 48hs (807,42±39.22 e 937,76 ± 41,87). Verificou-se ainda que o meio K apresentou maiores valores de vigor do que o meio KG (p=0,0144), e que o meio K foi capaz de preservar melhor a atividade mitocondrial P=0,0005. A concentração de TBARS no diluente K correlacionou-se negativamente com as variáveis motilidade, vigor, integridade de membrana plasmática e acrossomal. No diluente KG as correlações do TBARS e DAB III foram positiva (r=0,35), demonstrando que quanto maior a quantidade de células com baixa atividade mitocondrial, maior a concentração de TBARS. Foi também encontrada uma correlação negativa entre a variável integridade de acrossomo (ACRO) e TBARS (r=-0,40; P=0,0001), mostrando que quanto menor a porcentagem de células com acrossomo integro, maior a concentração de substancias reativas ao acido tiobarbitúrico. Concluindo que o diluente K foi eficaz em preservar as características seminais de ovino por até 48 horas e que a adição da gema de ovo ao diluente de Kenney não foi capaz de melhorar estas características. / Among the reproductive biotechniques routinely used in animal production, the artificial insemination (AI) is known to provide a greater gain in genetic improvement programs. The adequate selection of female and especially male productive and reproductive traits is the keystone to maximize the potential of this technique. Semen used for AI can be used fresh diluted or not, chilled and frozen. An essential role is played by semen extenders on volume expansion, allowing not only the fractioning in multiple insemination doses, but also the maintenance of sperm fertilizing potential. Therefore, for semen fractioning, chilling or cryopreservation, extenders are required to be atoxic, must maintain pH and osmolarity compatible to the sperm survival, and should be preferably inexpensive and easy to prepare. Therefore, the objective of the present study was to evaluate chilled ram semen using the Kenney extender (K) of the Kenney extender with egg yolk (KG) for 48 h. Forty ejaculates of four rams were (n=40) were used. Samples were equally divided into two aliquots and extended in K extender and KG extender. Samples were chilled at 10ºC and evaluated immediately after chilling (0h), 24 and 48 h later. These analyses included gross motility (swirl pattern), individual motility and vigor. Functional test analyses such as evaluation of plasma membrane integrity using the eosin-nigrosin staining technique, acrosome integrity using the fast green / bengal rose staining method (POPE, 1991), mitochondrial cytochemical activity evaluation utilizing diaminobenzidine (DAB) staining and assessment of sperm susceptibility to the oxidative stress based the levels of thiobarbituric acid reactive substances after the incubation with ferrous sulphate and ascorbate (TBARS) were performed. In this study, a significant influence of chilling period was found for spermatic motility and vigor dropping from 79.16±1.41 to 40.25±2.55 after 48 hours and from 3.92±0.06 to 2.57±0.10 after 48 hours, respectively. Time also negatively influenced the integrity of plasma and acrosomal membrane (0hr=95.75±0.36, 24hrs=90.69±0.99, 48hrs=86.11±1.45; and 0hr=90.34±0.80, 24hrs=84.33±1.30, 48hrs=76.67±1.69, respectively). Also, during the course of time there was a decrease in mitochondrial activity and an increase in TBARS, with an increase from moment 0 to 48 hrs (807.42 ± 39.22 and 937.76 ± 41.87). It was also found that the medium K had greater values of vigor than the medium KG (p=0.0144), and that the medium K was capable of better preserve mitochondrial activity (P=0.0005). A negative correlation was found between the TBARS concentration with motility and vigor and plasma and acrosomal membrane integrity when samples were stored with the extender K. In the KG extender, the TBARS and DAB III correlations were positive (r=0, 35) indicating that showing that the greater the number of cells with low mitochondrial activity, the higher the TBARS concentration. Also, a negative correlation between the acrosomal integrity variable (ACRO) and TBARS (r=-0, 40; P=0,0001) was found, which demonstrates that the lower the percentage of cells with intact acrosomal, the higher the susceptibility to the oxidative stress. Therefore, results indicated that the K extender was effective in preserve the seminal characteristics of ovine for 48 hours and the addition of egg yolk to kenney extender was not capable of improving such characteristics.

The Generation IV Very High Temperature Reactor (VHTR) design is being actively studied in various countries for application due to its inherent passive safe design, higher thermal efficiencies, and proposed capability of providing high temperature process heat. The pebble bed core is one of two core designs used in gas reactors. In the pebble bed core there are mechanisms present which can cause the flow to laminarize, thus reducing its heat transfer effectiveness. Wind tunnel experiments were conducted using Particle Image Velocimetry (PIV) to investigate boundary layer laminarization due to flow acceleration and convex curvature effects. The flow was subject to acceleration and curvature both separately and together and the flow behavior characterized with velocity flow profiles, mean boundary layer parameters, and turbulence quantities. Laminarization was identified and the influence of acceleration and curvature was characterized. / Graduation date: 2013

The SuperCritical Water-cooled nuclear Reactor (SCWR) is one of six Generation-IV nuclear-reactor concepts currently being designed. It will operate at pressures of 25 MPa and temperatures up to 625°C. These operating conditions make a SuperCritical Water (SCW) Nuclear Power Plant (NPP) suitable to support thermochemical-based hydrogen production via co-generation. The Copper-Chlorine (Cu‒Cl) cycle is a prospective thermochemical cycle with a maximum temperature requirement of ~530°C and could be linked to an SCW NPP through a piping network. An intermediate Heat eXchanger (HX) is considered as a medium for heat transfer with operating fluids selected to be SCW and SuperHeated Steam (SHS). Thermalhydraulic calculations based on an iterative energy balance procedure are performed for counter-flow double-pipe design concept HXs integrated at several locations on an SCW NPP coolant loop. Using various test cases, design and operating parameters are recommended for detailed future research. In addition, predicted effects of heat transfer enhancement on HX parameters are evaluated considering theoretical improvements from helically-corrugated HX piping. The effects of operating fluid pressure drop are briefly discussed for applicability in future studies. / UOIT

A series of accident simulations were performed using INL's thermal hydraulics code RELAP5-3D to analyze steady-state and transient behavior of a sodium cooled fast reactor. The reactor chosen for this study was General Electric's S-PRISM, which is a 1,000 MWt pool-type sodium-cooled fast reactor, designed for either an Oxide or Metal fueled core. Once key core characteristics including power profiles, reactivity feedback coefficients and delayed neutron parameters were calculated, S-PRISM was redesigned for a Nitride fueled core to take advantage of the Nitride fuel's high thermal conductivity and melting temperature. Loss of flow, loss of heat sink, loss of power and inadvertent control rod withdrawal accidents were simulated for each core at beginning, middle and end of cycle to determine if one fuel type provides significant safety advantages over the others.

Thesis (MEng)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: A novel induced draft hybrid (dry/wet) dephlegmator (HDWD) is introduced which can enhance the performance of dry air-cooled condenser systems and a model is developed to simulate its performance. The HDWD consists of two stages of cooling with the steam flow in series and the air flow in parallel through both stages. The first stage consists of downwardly inclined finned tube bundles, similar to conventional air-cooled condenser bundles, and the second stage comprises horizontal bare tube bundles of which the outer surface can selectively be operated dry or wet by spraying it with deluge water. A comparison of the HDWD with other existing and new concepts reveals the significant advantages that this technology has over other technologies. This thesis is a continuation of the work done by Heyns (2008), who introduced a forced draft HDWD and investigated its performance, and Owen (2013), who conducted a parametric investigation on the induced draft HDWD to improve the basic design proposed by Heyns (2008). In his thermo-flow model, Heyns (2008) conducted a thermal analysis assuming equal air flow through both stages and a constant vapor temperature inside the bundles, while Owen (2013) solved the thermal, steam-side pressure drop and draft equations. Both their models make use of empirical correlations by Gaddis & Gnielinski (1985), Zukauskas (1987), Mizushina et al. (1967) and Niitsu et al. (1967) for the performance characteristics. The current model solves the thermal, steam-side pressure drop and draft equations of the HDWD with better accuracy in the steam-side pressure drop calculation. The airside heat and mass transfer and loss coefficient correlations found in literature were found to deviate significantly from each other resulting in uncertainty regarding their suitability. Based on the recommendations by Owen (2013), a bare tube test bundle with 19 mm outer diameter tubes arranged with a triangular pitch of 38 mm is therefore designed, manufactured and tested to investigate the performance characteristics of the bundle experimentally under dry and wet operating conditions to evaluate the correlations from literature. The experimental data confirmed the applicability of the correlations of Gaddis & Gnielinski (1985) and Zukauskas (1987) to predict the dry HDWD performance, since they deviated by 7% and 5% respectively from the experimental data in die applicable range. The heat transfer during wet operation is slightly over estimated within 5% with the correlations of Mizushina et al. (1967) in the range of application. The air-side pressure drop during wet operation is underestimated by 29 to 39% by Niitsu et al. (1967) and the correlation obtained from the experimental results is therefore used in the current model. Using the current HDWD model indicates significant performance enhancement using tubes with a smaller diameter in the delugeable bundle compared to the larger tubes of Heyns (2008) and agrees very well with the model of Owen (2013). / AFRIKAANSE OPSOMMING: ‘n Hibriede geïnduseerde trek deflegmator is voorgestel wat die werksverrigting van huidige lugverkoelde kondenserstelsels kan verbeter en ‘n model is ontwikkel wat die werksverrigting simuleer. Die deflegmator bestaan uit twee stadiums van verkoeling met die stoomvloei in serie en die lugvloei in parallel deur beide stadia. Die eerste stadium bestaan uit skuins, afwaartse finbuisbundels, soortgelyk aan konvensionele lugverkoelde kondenser-finbuisbundels, en die tweede stadium bestaan uit horisontale kaalbuisbundels waarvan die buite-oppervlak selektief droog of nat bedryf kan word deur dit met verkoelingswater te benat. ‘n Vergelyking tussen die deflegmator en ander huidige en nuwe konsepte toon merkbare voordele wat die tegnologie bo die ander tegnologië het. Die tesis is ‘n voortsetting van die werk van Heyns (2008), wie ‘n hibriede geforseerde trek deflegmator voorgestel en die werksverrigting daarvan ondersoek het, en Owen (2013) wat ‘n parametriese studie op die hibriede geïnduseerde trek deflegmator gedoen het om die basiese ontwerp voorgestel deur Heyns (2008) te verbeter. In sy termovloei-model, het Heyns (2008) die termiese analise ondersoek met die aanname van gelyke hoeveelhede lugvloei deur beide stadia met ‘n konstante damp-temperatuur binne die bundels, terwyl Owen (2013) die termiese, stoomkant-drukval and trekvergelykings opgelos het. Beide hul modelle maak van die empiriese korrelasies van Gaddis & Gnielinski (1985), Zukauskas (1987), Mizushina et al. (1967) en Niitsu et al. (1967) gebruik vir die werkverrigtingskarakteristieke. Die huidige model los die termiese, die stoomkant-drukval asook die trekvergelykings van die deflegmator op met verbeterde akkuraatheid van die stoomkant-drukval berekeninge. Die lugkant warmte- en massaoordrag en verlieskoëffisiënt korrelasies wyk baie van mekaar af wat lei tot onsekerhede rakende hul toepasbaarheid. Gebaseer op die voorstelle van Owen (2013) is ‘n kaalbuisbundel met 19 mm buite-diameter buise met ‘n driehoekige steek van 38 mm dus ontwerp, vervaardig en getoets om die werksverrigtingskarakteristieke van die bundel eskperimenteel te ondersoek onder droë en nat toestande om die korrelasies van die literatuur te evalueer. Die eksperimentele data bevestig die toepaslikheid van die korrelasies van Gaddis & Gnielinski (1985) en Zukauskas (1987) om die droë werksverrigting van die deflegmator te voorspel, aangesien hul met 7% en 5% onderskeidelik afwyk van die eksperimentele data in die toepaslike bestek. Die warmteoordrag tydens natwerking is ietwat oorskat binne 5% met die korrelasies van Mizushina et al. (1967) in die bestek van toepassing. Die lugkant-drukval tydens natwerking is onderskat met 29 tot 39% deur Niitsu et al. (1967) en die korrelasie verkry vanaf die eksperimentele resultate is dus gebruik in die huidige model. Deur gebruik te maak van die huidige model van die deflegmator dui merkbare werksverrigting verbetering aan deur van buise met ‘n kleiner diameter in die benatbare bundel te gebruik in vergelyking met die groter buise van Heyns (2008) en stem baie goed ooreen met die model van Owen (2013).

Various fuel cycles for a sodium-cooled, subcritical, fast reactor with a fusion neutron source for the transmutation of light water reactor spent fuel have been analyzed. All fuel cycles were 4-batch, and all but one were constrained by a total fuel residence time consistent with a 200 dpa clad and structure materials damage limit. The objective of this study was to achieve greater than 90% burn up of the transuranics from the spent fuel.

Made available in DSpace on 2014-10-09T12:24:49Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:04:53Z (GMT). No. of bitstreams: 1 00422.pdf: 1756629 bytes, checksum: 85b8a14cae110a01c2e28df8958192d9 (MD5) / Dissertacao (Mestrado) / IEA/D / Escola Politecnica, Universidade de Sao Paulo - POLI/USP