The dissertation thesis deals with study of advanced steady-state and time-resolved fluorescence techniques, which can be used for study of micellar systems properties. Selected fluorescence techniques were used for characterization of Septonex and CTAB cationic micellar systems and theirs interactions with hyaluronan. Fluorescent probe pyrene was used for determination of critical micelle concentration (CMC) and micellar aggregation number of these surfactants. The changes of fluorescence behaviour of fluorescein and prodan were studied in wide concentration range of Septonex. Next chapter of thesis deals with study of Förster resonance energy transfer between perylene and fluorescein in Septonex and CTAB micellar solutions and the effect of hyaluronan addition to these systems. Also steady-state and time-resolved fluorescence anisotropy studies were used for research of the effect of hyaluronan addition to micellar solutions. The last chapter of this thesis is focused on photophysical behaviour of Prodan in different solutions (water, Septonex solutions below CMC, hyaluronan solution, Septonex micellar solution and Septonex micellar solution with hyaluronan), which was discussed on the basis of time-resolved emission spectra.

In this diploma thesis were investigated in terms of microviscosity liquid and condensed systems composed of hyaluronan (Hya) and cationic surfactant cetyltrimethylammonium bromide (CTAB). The excitation and emission spectra, lifetime, steady-state fluorescence anisotropy and time-resolved fluorescence anisotropy of the samples were measured. First, was studied the formation of hydrophobic domains in the system Hya-CTAB at concentration of CTAB lower than its critical micelle concentration in an aqueous solution and 0.15M NaCl. It was found that in an aqueous solution small hydrophobic domains linked to chains Hya are formed. Then an increasing concentration of CTAB leads to phase separation and formation of gel. Due to the addition of NaCl then leads to the reorganization of this system and probably the formation of free micelles in the solution. Were also studied condensed phase of system Hya-CTAB-NaCl at high concentrations of surfactant during fourteen days of ageing. It was found that the microviscosity of hydrophobic domains is constant, but the microviscosity of hydrophilic parts gradually decreases.

This diploma thesis is focused on the determination of distribution a surfactant at phase separation in polymer-surfactant system. Sodium hyaluronate of three molecular weights was chosen as a polymer, CTAB was used as a surfactant. The experiments were performed in an environment of 0,15 M NaCl. The measurement of the CTAB concentration in samples was based on the formation of coloured complexes of CTAB and picric acid in chloroform. UV-VIS spectroscopy was used for the detection of these complexes. The content of CTAB was determined in four gels of different composition (2% Hya + 200 mM CTAB, 2 % Hya + 50 mM CTAB, 0,5 % Hya + 200 mM CTAB, 0,5 % Hya + 50 mM CTAB). All gels were gradually washed five times with 0,15 M NaCl. The content of CTAB was determined for newly prepared gels and for gels after 2 and 4 months since the preparation. Initial concentrations of CTAB and hyaluronan have greater influence on the distribution of CTAB after phase separation, than the molecular weight of hyaluronan. The content of CTAB in newly prepared gels and after 4 months since preparation is very similar and demonstrates the stability of the system.

Glutathione (GSH) is an important biological thiol, it performs significant biological functions such as serving an antioxidant which protect cells from oxidative stress by trapping free radicals which damage DNA and RNA. It is known that abnormal plasma levels of GSH have been linked to various human diseases. Therefore, the rapid, sensitive and highly selective detection of GSH is of great importance for investigating its functions in diseases diagnosis. Interestingly, we found in cetyl trimethylammonium bromide (CTAB) medium, the resorufin-based probe shows an extremely fast, highly selective response to GSH. The result indicates that this dye can be employed to detect GSH in biological samples such as human plasma. Cysteine (Cys) is another important biological thiol which is involved in a variety of significant cellur functions, including protein synthesis, detoxication, and metabolic process, etc. Abnormal levels of Cys are related to many diseases, such as slowed growth, Alzheimer's disease and cardiovascular disease. Thus, the detection and quantification of Cys in physiological media is of great importance. In this thesis, I am going to present two organic fluorescent probes (Resorufin-based probe and SNF probe) for the detection and quantification of Cys. In addition, we prove that they can directly quantify Cys in human plasma. The chemical mechanisms involved in the detection of Cys are discussed.

El principal objetivo de la tesis doctoral consiste en el estudio de la adsorción de agentes de control de forma utilizados en la síntesis de nanopartículas, así como otras potenciales moléculas que pueden utilizarse para la misma razón o para funcionalizar las mismas nanopartículas, sobre electrodos monocristalinos de oro y platino. Para ello, se han utilizado diferentes estrategias experimentales (voltametría cíclica, espectroscopia infrarroja, calculos DFT, etc...) para establecer una relación entre los resultados obtenidos y la forma final de las nanopartículas cuando se emplean los agentes decapantes estudiados. Las moléculas estudiadas han sido el ácido cítrico, el bromuro de hexadeciltrimetil amonio (CTAB) y el ácido glutámico. A su vez, lo electrodos monocristalinos de platino y oro escogidos son aquellos que contienen los planes basales, estos son, (111), (100) y (110). / Este trabajo ha sido financiado por el Ministerio de Economía y competitividad a través de la ayuda de contractos predoctorales para la formación de doctores BES-2017-079703 y por la Generalitat Valenciana a través de Subvenciones para la contratación de personal investigador de carácter predoctoral ACIF/2017.

No description available.

Dans ce travail de thèse, le microscope à force atomique (AFM) a été utilisé comme outil de manipulation de haute précision pour construire des nanostructures plasmoniques avec des géométries définies et un réglage précis de la distance interparticulaire et également comme technique de spectroscopie d'absorption. Différentes études concernant les phénomènes pertinents pour la manipulation des nanoparticules et émergeant à l'interface substrat-nanoparticules, ont été réalisées. Des expériences de frottement menées sur diverses surfaces d'oxydes ont révélé un nouveau mécanisme de frottement à l’échelle nanométrique, expliqué par un modèle de potentiel d'interaction de type Lennard-Jones modifié. Les propriétés de frottement et d'adhésion de CTAB adsorbé sur silice sont également présentées. Des nano-bâtonnets d'or fonctionnalisés par du CTAB ont été manipulés par AFM afin de construire des nanostructures plasmoniques. La dernière partie de la thèse présente les efforts expérimentaux et théoriques pour démontrer la faisabilité de l'utilisation d'un AFM comme une technique de spectroscopie optoélectronique à base de force. / In this thesis work the atomic force microscope (AFM) was employed first as a high precision manipulation tool for building plasmonic nanostructures with defined geometries and precise tuning of interparticle distance and second as an absorption spectroscopy technique. Different studies regarding phenomena emerging at sample nanoparticle interface relevant for nanoparticle manipulation were performed. Friction experiments conducted on various oxide surfaces revealed a novel nanoscale stick slip friction mechanism, explained by a modified Lennard-Jones-like interaction potential model. Frictional and adhesion properties of CTAB adsorbed on silica are also reported. CTAB functionalized gold nanorods were used for building specific plasmonic particulate nanostructures. The final part of the thesis presents experimental and theoretical efforts to demonstrate the feasibility of using an AFM as a force-based optoelectronic spectroscopy technique.

Orientadora: Ivanise Gaubeur / Dissertação (mestrado) - Universidade Federal do ABC. Programa de Pós-Graduação em Ciência e Tecnologia/Química, 2011.

The diploma thesis deals with the preparation and characterization of catanionic complexes and their possible application to pharmaceutics and medicine. The catanionic complexes were prepared by mixing two oppositely charged surfactants with the concentration of 20 mmol·dm­3 in various volume ratios. Two systems were analyzed – CTAB + SDS and Septonex + SDS. Both systems were prepared in an aqueous and physiological environment. The turbidimetric analyses provided results of the intensity of turbidity of the prepared mixtures. The size and stability of the prepared particles were determined by DLS and ELS measurements. CTAB-rich samples showed significant viscosity changes and they were therefore characterized by rheological measurements. The results of this work show that the asymmetry of alkyl chains, surfactant selection, temperature, and ionic strength have a significant influence on the properties and self-assembly of surfactants in catanionic complexes.

The aim of this thesis was to prepare hyaluronic acid micro- and nanoparticles based on electrostatic interactions with oppositely charged molecules. Following parameters were monitored: correlation function behavior, the particle size and zeta potential value. At the beginning, it was necessary to study the behavior of hyaluronan in solution by dynamic light scattering measurement. Micro- and nanoparticles were prepared by mixing different volume ratios of negatively charged hyaluronan and positively charged polyarginine or cetyltrimethylammonium bromide. Micro- and nanoparticles were prepared in aqueous solution as well as in 0,15 M sodium chloride solution (physiological solution). In the case of the hyaluronan solution a polydisperse character of hyaluronan was detected. It was found that the dissolution of hyaluronan in the physiological solution gives us the smaller particle size in opposite to particle size obtained from the same concentrations of hyaluronan dissolved in water. Furthermore, it was found that systems composed of hyaluronan and polyarginine create particle size of about 100 nm. Whereas systems consisting of cetyltrimethylaminoum bromide and hyaluronan form larger particles, in units of hundreds of nanometers, the particle size in physiological solution were smaller than the same systems dissolved in aqueous solution.