Magister Scientiae - MSc / Solar energy generation arises as a result of direct conversion of sunlight into electricity a by solar cell; which is mainly made up of a semiconducting material incorporated into a system. It is emerging as one of the most reliable and cost efficient renewable energy sources. Within the solar field, organic bulk heterojunction photovoltaic cells have proved of being able to have a great impact in the future years; mainly due to the easy processability of the active layer and substrate, their cost effectiveness and above all, a good power conversion efficiency associated to the close 3-dimensional interpenetrating network that is generated from blending donor and acceptor semiconducting materials together in a bulk heterojunction active layer. In this research work, we therefore report on the study of a newly developed organic bulk heterojunction active layer based on a blend of a star-copolymer generation 1 poly(propylenethiophenoimine)-co-poly(ethylenedioxythiophene) (G1PPT-co-PEDOT) as donor material with N,N-diisopropylnaphthalene diimide (NDI) as acceptor material. Both materials were chemically synthesized. The synthesis of G1PPT-co-PEDOT started first by the functionalization of generation 1 poly(propyleneimine) tetramine, G1PPI into G1PPT by condensation reaction in the presence of 2-thiophene carboxaldehyde under Nitrogen gas followed by the copolymerization of G1PPT with ethylene dioxythiophene (EDOT) monomer in the presence of ammonium persulfate, (NH4)2S2O8 as oxidant. On the other hand, NDI was also synthesized via condensation reaction of 1,4,5,8-naphthalene tetracarboxylic dianhydride in the presence of two (2) equivalences of N,N-diisopropylamine at 110 oC overnight in DMF. Both materials were characterized using FT-IR, UV-Vis spectroscopy, Fluorescence spectroscopy, Voltammetry, HRSEM microscopy and XRD. Based on the cyclic voltammetry and UV-Vis results, we were able to calculate the HOMO, LUMO and band gap energy (Eg) values of both the donor and acceptor to be -4.03 eV, -6.287 eV and 2.25 eV for iii the donor G1PPT-co-PEDOT respectively and -4.302 eV, -7.572 eV and 3.27 eV for the acceptor respectively. From these results, the energy diagram for both donor and acceptor was drawn and it comes out that the separation between the HOMO of the donor and the LUMO of the acceptor ΔEg = 1.985 eV, the ideal value for a good donor-acceptor combination. Also the offset energy that is, the energy difference between the LUMO of the donor and the LUMO of the acceptor is 0.302 eV.

O uso e estudo de materiais híbridos para desenvolver novos materiais com qualidades superiores para aplicações em fotônica, sensores e áreas afins é um desafio para o químico. Neste contexto deve-se especular sobre as propriedades de associação de materiais orgânicos e inorgânicos para alcançar novas e melhores propriedades. Neste estudo, os óxidos metálicos (óxidos de cério em particular), uma classe especial entre nanopartículas inorgânicas, foram selecionados para explorar as suas aplicações com uma classe, também especial de compostos orgânicos, sendo no nosso estudo as Naftaleno Diimidas. Óxido de cério é um semicondutor, com uma “bandgap” larga, conhecido por sua capacidade catalítica e por sua simples manipulação para preparar filmes finos e nanopartículas. Derivados de Naftaleno Diimidas são conhecidos por sua superior atividade eletroquímica comparáveis aos dos Paraquat (metilviologênio), mas com amplitude maior de aplicações fotoquímicas. Foram sintetizadas Naftaleno Diimidas carregados positivamente e negativamente com propriedades surfactantes. Após a caracterização detalhada das Naftaleno Diimidas, incluindo auto-associação e interação com moléculas de surfactantes, a interação com nanopartículas de óxido de cério foram determinadas. As Naftaleno Diimidas interagiram de forma especial com nanopartículas de óxido de cério conferindo ausência de atividade hidrolítica e um comportamento fotocrômico singular. Propõe-se que o corante orgânico se adsorve nas ranhuras das nanopartículas e, além disso forma dímeros estáveis que têm importância para as novas fotoatividades observadas. / The use and study of hybrid materials is a challenge for the chemist to develop materials having new and superior qualities for applications in photonics, sensors and related areas. In this context one has to speculate on the properties of the organic and inorganic partners to achieve better and new properties. In this study the metal oxides (in particular Cerium Oxides), a special class among inorganic nanoparticles were selected to exploit their applications with an also special class of organic compounds the Naphthalene Diimides. Cerium Oxide is a wide bandgap semiconductor well known for its catalytic capabilities and for its simple manipulation to prepare thin films and nanoparticles. Naphthalene Diimides derivatives are known for their superior lectrochemical activities comparable to those of Paraquat (Methyl Viologen) but with larger amplitude of photochemical applications. Positively and negatively charged, surfactant like, Naphthalene Diimides, were synthesized. After detailed characterization of the Naphthalene Diimides including selfassociation and interaction with surfactant molecules, the interaction with Cerium Oxide nanoparticles was determined. Naphthalene Diimides interacted in a special manner with Cerium Oxide nanoparticles rendering hydrolytic inertness and novel photochromic behavior. The organic dye is proposed to adsorb in the crevices of the particles and furthermore forming stable dimers that accounts for the new photoactivities observed

No description available.

Le contrôle de la morphologie de la couche active en optoélectronique organique représente un objectif majeur du fait de son impact sur la stabilité et les performances des dispositifs. En particulier, le degré d'autoorganisation d'un mélange de deux composés à caractère donneur (D) et accepteur (A) d'électrons, ainsi que leurs orientations sont déterminants pour obtenir à la fois un de transfert de charges efficace et des chemins de percolation continus jusqu'aux électrodes. Durant ce travail de thèse, nous avons synthétisé plusieurs séries de co-oligomères à blocs donneur-accepteur capables de s'auto-organiser pour former des lamelles alternées D/A à longue distance. Les co-oligomères présentent une architecture moléculaire de type diade (DA) ou triade (DAD ou ADA), et sont constitués d'une longueur de bloc D variable. Les molécules sont toutes composées d'un bloc A à base de perylène diimide et d'un bloc D contenant les motifs thiophène, fluorène et benzothiadiazole. Une attention particulière a été portée sur l'étude des propriétés optiques, électrochimiques, photophysiques, structurales ou encore opto-électroniques de nos matériaux. En particulier, nous nous avons montré que l'organisation lamellaire était très fortement dépendante de l'architecture moléculaire, puisque seuls les systèmes AD et ADA conduisent à une structuration à longue distance. Par ailleurs, en ajustant la densité électronique au sein du bloc D, nous avons montré qu'il était possible de contrôler à la fois le temps de formation et la durée de vie des états à transfert de charges. Enfin,les premiers résultats de caractérisation du transport de charges et des propriétés photovoltaïques démontrent l'intérêt de ces matériaux dans la réalisation de dispositifs photovoltaïques organiques mono-composants.

I) Introduction p-Conjugated polymers inherently combine electronic properties of inorganic semiconductor crystals and material characteristics of organic plastics due to their special molecular design. This unique combination has led to developing new unconventional optoelectronic technologies and, further, resulted in the evolution of semiconducting polymers (SCPs) as fundamental components for novel electronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and organic solar cells (OSCs).[1–5] Moreover, the material flexibility, capability for thin-film formation, and solution processibility additionally allow utilizing modern printing technologies for the large-scale fabrication of flexible, light-weight organic electronics. This especially enables to significantly increase the production speed and, moreover, to drastically reduce the costs per unit.[6, 7] In particular, transistors are the most important elements in modern functional electronic devices because of acting as electronic switches in logic circuits or in displays to control pixels. However, due to molecular arrangement and interactions, the electronic performance of SCPs cannot compete with the one of monocrystalline silicon which is used in state-of-the-art high-performance microtechnology.[5, 8] Nonetheless, intensive and continuing efforts of scientists focused on improving the performance of OFETs, with the special focus on the charge carrier mobility, by optimizing the polymer structure, processing conditions and OFET device architecture. By this, it was possible to identify crucial relationships between polymer structure, optoelectronic properties, microstructure, and OFET performance.[8] Nowadays, the interdisciplinary scientific success is represented by high-performance SCPs with charge carrier mobilities exceeding the value of amorphous silicon.[3, 9] However, further research is essential to enable developing the next generation of electronic devices for application in healthcare, safety technology, transportation, and communication. II) Objective and Results Within the scope of this doctoral thesis, current high-performance p-conjugated SCPs should be studied comprehensively to improve the present understanding about the interdependency between molecular structure, material properties and charge transport. Therefore, the extensive research approaches focused on different key aspects of high charge carrier mobility polymers for organic transistors. The performed investigations comprised the impact of, first, novel design concepts, second, precise structural modifications and, third, synthetic and processing conditions and led to the major findings listed below. 1. The design concept of tuning the p-conjugation length allows to gradually modulate physical material properties and demonstrates that a strong localization of frontier molecular orbitals in combination with a high degree of thin-film ordering can provide a favorable platform for charge transport in p-conjugated semiconducting polymers.[1] 2. The replacement of thiophene units with thiazoles in naphthalene diimide-based p- conjugated polymers allows to increase interchain interactions and to lower frontier molecular orbitals. This compensates the potentially detrimental enhancement of backbone torsion and drives the charge transport to unipolar electron transport, whereas mobility values are partially comparable with those of the respective thiophene containing analogs. 3. p-Conjugated diketopyrrolo[3,4-c]pyrrole-based copolymers can be synthesized within fifteen minutes what, in combination with avoiding aqueous washings and optimizing processing conditions, allowed an increase in morphological and energetic order and, thus, improved the charge transport properties significantly. III) Conclusion The key findings of this doctoral thesis provide new significant insights into important aspects of designing, synthesizing and processing high charge carrier mobility polymers. By this, they can guide future research to further improve the performance of organic electronic devices - decisive for driving the development and fabrication of smart, functional and wearable next-generation electronics. References [1] T. Erdmann, S. Fabiano, B. Milián-Medina, D. Hanifi, Z. Chen, M. Berggren, J. Gierschner, A. Salleo, A. Kiriy, B. Voit, A. Facchetti, Advanced Materials 2016, 28 (41), 9169–9174, DOI:10.1002/adma.201602923. [2] Y. Karpov, T. Erdmann, I. Raguzin, M. Al-Hussein, M. Binner, U. Lappan, M. Stamm, K. L. Gerasimov, T. Beryozkina, V. Bakulev, D. V. Anokhin, D. A. Ivanov, F. Günther, S. Gemming, G. Seifert, B. Voit, R. Di Pietro, A. Kiriy, Advanced Materials 2016, 28 (28), 6003–6010, DOI:10.1002/adma.201506295. [3] A. Facchetti, Chemistry of Materials 2011, 23 (3), 733–758, DOI:10.1021/cm102419z. [4] A. J. Heeger, Chemical Society Reviews 2010, 39, 2354–2371, DOI:10.1039/B914956M. [5] H. Klauk, Chemical Society Reviews 2010, 39, 2643–2666, DOI:10.1039/B909902F. [6] S. G. Bucella, A. Luzio, E. Gann, L. Thomsen, C. R. McNeill, G. Pace, A. Perinot, Z. Chen, A. Facchetti, M. Caironi, Nature Communications 2015, 6, 8394, DOI:10.1038/ncomms9394. [7] H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W. Wu, E. P. Woo, Science 2000, 290 (5499), 2123–2126, DOI:10.1126/science.290.5499.2123. [8] D. Venkateshvaran, M. Nikolka, A. Sadhanala, V. Lemaur, M. Zelazny, M. Kepa, M. Hurhangee, A. J. Kronemeijer, V. Pecunia, I. Nasrallah, I. Romanov, K. Broch, I. McCulloch, D. Emin, Y. Olivier, J. Cornil, D. Beljonne, H. Sirringhaus, Nature 2014, 515 (7527), 384–388, DOI:10.1038/nature13854. [9] S. Holliday, J. E. Donaghey, I. McCulloch, Chemistry of Materials 2014, 26 (1), 647–663, DOI: 10.1021/cm402421p.

I) Introduction p-Conjugated polymers inherently combine electronic properties of inorganic semiconductor crystals and material characteristics of organic plastics due to their special molecular design. This unique combination has led to developing new unconventional optoelectronic technologies and, further, resulted in the evolution of semiconducting polymers (SCPs) as fundamental components for novel electronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and organic solar cells (OSCs).[1–5] Moreover, the material flexibility, capability for thin-film formation, and solution processibility additionally allow utilizing modern printing technologies for the large-scale fabrication of flexible, light-weight organic electronics. This especially enables to significantly increase the production speed and, moreover, to drastically reduce the costs per unit.[6, 7] In particular, transistors are the most important elements in modern functional electronic devices because of acting as electronic switches in logic circuits or in displays to control pixels. However, due to molecular arrangement and interactions, the electronic performance of SCPs cannot compete with the one of monocrystalline silicon which is used in state-of-the-art high-performance microtechnology.[5, 8] Nonetheless, intensive and continuing efforts of scientists focused on improving the performance of OFETs, with the special focus on the charge carrier mobility, by optimizing the polymer structure, processing conditions and OFET device architecture. By this, it was possible to identify crucial relationships between polymer structure, optoelectronic properties, microstructure, and OFET performance.[8] Nowadays, the interdisciplinary scientific success is represented by high-performance SCPs with charge carrier mobilities exceeding the value of amorphous silicon.[3, 9] However, further research is essential to enable developing the next generation of electronic devices for application in healthcare, safety technology, transportation, and communication. II) Objective and Results Within the scope of this doctoral thesis, current high-performance p-conjugated SCPs should be studied comprehensively to improve the present understanding about the interdependency between molecular structure, material properties and charge transport. Therefore, the extensive research approaches focused on different key aspects of high charge carrier mobility polymers for organic transistors. The performed investigations comprised the impact of, first, novel design concepts, second, precise structural modifications and, third, synthetic and processing conditions and led to the major findings listed below. 1. The design concept of tuning the p-conjugation length allows to gradually modulate physical material properties and demonstrates that a strong localization of frontier molecular orbitals in combination with a high degree of thin-film ordering can provide a favorable platform for charge transport in p-conjugated semiconducting polymers.[1] 2. The replacement of thiophene units with thiazoles in naphthalene diimide-based p- conjugated polymers allows to increase interchain interactions and to lower frontier molecular orbitals. This compensates the potentially detrimental enhancement of backbone torsion and drives the charge transport to unipolar electron transport, whereas mobility values are partially comparable with those of the respective thiophene containing analogs. 3. p-Conjugated diketopyrrolo[3,4-c]pyrrole-based copolymers can be synthesized within fifteen minutes what, in combination with avoiding aqueous washings and optimizing processing conditions, allowed an increase in morphological and energetic order and, thus, improved the charge transport properties significantly. III) Conclusion The key findings of this doctoral thesis provide new significant insights into important aspects of designing, synthesizing and processing high charge carrier mobility polymers. By this, they can guide future research to further improve the performance of organic electronic devices - decisive for driving the development and fabrication of smart, functional and wearable next-generation electronics. References [1] T. Erdmann, S. Fabiano, B. Milián-Medina, D. Hanifi, Z. Chen, M. Berggren, J. Gierschner, A. Salleo, A. Kiriy, B. Voit, A. Facchetti, Advanced Materials 2016, 28 (41), 9169–9174, DOI:10.1002/adma.201602923. [2] Y. Karpov, T. Erdmann, I. Raguzin, M. Al-Hussein, M. Binner, U. Lappan, M. Stamm, K. L. Gerasimov, T. Beryozkina, V. Bakulev, D. V. Anokhin, D. A. Ivanov, F. Günther, S. Gemming, G. Seifert, B. Voit, R. Di Pietro, A. Kiriy, Advanced Materials 2016, 28 (28), 6003–6010, DOI:10.1002/adma.201506295. [3] A. Facchetti, Chemistry of Materials 2011, 23 (3), 733–758, DOI:10.1021/cm102419z. [4] A. J. Heeger, Chemical Society Reviews 2010, 39, 2354–2371, DOI:10.1039/B914956M. [5] H. Klauk, Chemical Society Reviews 2010, 39, 2643–2666, DOI:10.1039/B909902F. [6] S. G. Bucella, A. Luzio, E. Gann, L. Thomsen, C. R. McNeill, G. Pace, A. Perinot, Z. Chen, A. Facchetti, M. Caironi, Nature Communications 2015, 6, 8394, DOI:10.1038/ncomms9394. [7] H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W. Wu, E. P. Woo, Science 2000, 290 (5499), 2123–2126, DOI:10.1126/science.290.5499.2123. [8] D. Venkateshvaran, M. Nikolka, A. Sadhanala, V. Lemaur, M. Zelazny, M. Kepa, M. Hurhangee, A. J. Kronemeijer, V. Pecunia, I. Nasrallah, I. Romanov, K. Broch, I. McCulloch, D. Emin, Y. Olivier, J. Cornil, D. Beljonne, H. Sirringhaus, Nature 2014, 515 (7527), 384–388, DOI:10.1038/nature13854. [9] S. Holliday, J. E. Donaghey, I. McCulloch, Chemistry of Materials 2014, 26 (1), 647–663, DOI: 10.1021/cm402421p.

The low redox potential of guanines (G 1.29 V vs. NHE) compared to other nucleobases, makes them potentially susceptible to attack by exogenous and endogenous damaging species. This property of guanine has also been utilized for the development of several anticancer agents including the well-known platinum complexes, cisplatin and carboplatin. The two closely related nickel complexes, NiCR and NiCR-2H, exhibit significant differences in cytotoxicity towards MCF-7 cancer cells. In the first part of this work, we explain this difference using biochemical and biophysical approaches to study their interactions with duplex DNA. The nickel complexes were found to selectively oxidize guanines in bulged DNA structures in the presence of oxidant and notably NiCR-2H oxidizes guanines more efficiently than NiCR. According to 1 H NMR studies, NiCR-2H binds strongly to the N7 position of dGMP compared to NiCR and could be an important oxidation product of NiCR under physiological conditions. The second part of this work focuses on the secondary DNA structures known as G-quadruplex formed in the guanine rich telomeric region. G-quadruplex is formed by stacking of G-quartets (a coplanar cyclic array of four Gs) on top of each other. Its formation is known to inhibit the activity of the reverse transcriptase telomerase that is overexpressed in 80-90% cancer cells. The guanines in telomeric DNA are readily oxidized due to their low redox potential and the major oxidation product is 7, 8-dihydro-8-oxoguanine (OxodG). OxodG (0.58 V vs. NHE) can further be oxidized in the presence of one electron oxidants and the resulting product forms adducts with endogenous nucleophiles such as spermine. In light of these findings, we hereby designed and synthesized novel bifunctional perylene derivatives that can selectively bind to the telomeric DNA via G-quadruplex formation and subsequently react with OxodG in close proximity. These compounds have strong binding affinity towards G-quadruplex and can significantly stabilize the OxodG containing G-quadruplex motif by end stacking on the upper G-quartet. The effect of these compounds on telomerase activity and cytotoxicity towards Hep3B cancer cells was also evaluated.