O objetivo deste trabalho foi avaliar a efetividade do vedamento apical e linear de diferentes materiais utilizados como barreira protetora cervical (BPC) no clareamento interno, localizados ao mesmo nível e 1mm acima da junção amelocementária (JAC). Cento doze dentes bovinos foram divididos em sete grupos de acordo com o material de BPC utilizado, além de um grupo controle, e em dois subgrupos de acordo com a localização, sendo assim distribuídos: grupo GRC com resina composta sem sistema adesivo (Z250); grupo GVR com Cimento de Ionômero de Vidro (CIV) convencional (Vidrion R); grupo GVB com CIV modificado por resina de forramento (Vitrebond); grupo GVTR com CIV modificado por resina restaurador (Vitremer); grupo GCZ com Cimento de Fosfato de Zinco (CIMENTO DE ZINCO); grupo GCT com material restaurador provisório (Coltosol); grupo GCF com material provisório fotopolimerizável (Clip F); e grupo controle com Gutapercha e cimento selador (Fillapex). Os dentes foram clareados pela técnica walking bleach durante sete dias e após esse período foram corados durante 48hrs, enquanto armazenados com temperatura de 37oC e umidade a 100%. Foi realizada avaliação através de inspeção visual. A análise estatística foi feita através da análise de variância a dois critérios (ANOVA-2) e teste de Tukey. Os grupos experimentais revelaram que o único fator que representou importância no vedamento apical (F=26,42; p=0,00) e linear (F=29,73; p=0,00) foi o tipo de material empregado, independente da sua localização. Os grupos GRC e GCZ apresentaram os piores valores de vedamento e apresentaram diferença estatisticamente significativa (p=<0,05) quando comparados com os outros grupos e com o grupo controle. Os melhores resultados foram encontrados nos grupos GCT, GCF, GVB, GVTR e GVR, porém sem diferença estatisticamente significativa entre eles (p=<0,05) e com o grupo controle. Através do teste de correlação de Spearman verificou-se correlação positiva (r=0,911; p=0,00) entre a infiltração apical e linear. Os resultados sugerem que a capacidade de vedamento linear e apical da BPC varia de acordo com o material aplicado, independentemente da localização em relação à JAC. / The aim of this study was to evaluate the apical and linear sealing in different materials placed as a protective cervical barrier (BPC) in internal bleaching at Cementoenamel junction (CEJ) level and 1mm above. 112 bovine teeth were divided into seven groups according to the material to be placed as PCB and a control group, and two subgroups each in relation to their JAC level position: GRC Resin composite without adhesive system (Z250); GVR, Conventional glass ionomer cement (GIC) (VIDRION R); GVB, Lining resin modified GIC (VITREBOND); GVTR, Restorative resin modified GIC (VITREMER); GCZ, Zinc phosphate cement (CEMENTO DE ZINCO); GCT, Temporary restorative material (COLTOSOL), GCF, Light curing temporary material (CLIP F). A control group with gutta-percha and sealer cement (Fillapex) with the two positions was performed too. The teeth were bleached by walking bleach technique for seven days and then stained for 48hrs while stored at 37oC and humidity to 100%. Visual inspection was used to evaluate the specimens. Statistical analyses were performed with the two-factor analysis of variance (ANOVA-2) and Tukey test. The experimental groups showed that the main factor for apical (F=26.42, p=0.00) and linear (F=29.73; p=0.00) sealing was the type of material used regardless of their location. The experimental groups GRC and GCZ had the worst sealing values and were statistically significant different (p= < 0.05) with the other groups and the control group. The groups GCT, GCF, GVB, GVTR and GVR showed better result with no significance difference between them and the control group (p=< 0,05). The Spearman rank correlation coefficient revealed the positive significant correlation (r = 0.911, p = 0.00) between the apical and linear leakage. These results suggest that the ability of linear and apical sealing of PCB, varies according to the applied material regardless of the CEJ position.

Objectives: To compare two in-office bleaching methods with respect to tooth color change and level of hydrogen peroxide penetration into the pulp cavity, and evaluate relationships between penetration level and color change. Methods: 80 extracted canines were sectioned above the CEJ and pulp tissue removed. Tooth thickness was measured from the outer labial surface to the outer boundary of the pulp cavity at the cross-sectioned root 3mm below the CEJ using a digital caliper. Baseline color was measured spectrophotometrically; acetate buffer was added into the cavity. Teeth were mounted and exposed to two different bleaching regimens (conventional versus sealed bleaching technique). After exposure to 38% hydrogen peroxide gel for one hour, buffer was removed from the cavity and placed into a volumetric flask. Hydrogen peroxide amount was estimated spectrophotometrically using leucocrystal violet and horseradish peroxidase. Specimen color was re-measured 2 hours post-bleaching. Color change was measured per Commission Internationale de l'Eclairage methodology. Linear regression was used to evaluate factors affecting color change, including bleaching technique. Results: The conventional and sealed bleaching groups showed no difference at baseline with respect to tooth thickness or any of the L*a*b color measures (p>0.51); however there was significantly greater hydrogen peroxide penetration in the conventional bleaching group (p<0.0001). Linear modeling of the change in lightness (ΔL) showed that the increase in lightness tended to be greater for teeth with lower initial L* values (r=-0.32, p=0.004). After adjustment for initial L*, there was no evidence that ΔL differed with hydrogen penetration levels (p=0.53) or bleaching technique (mean group difference in ΔL= 0.36; p=0.27). Conclusion: Both groups showed significant increases in lightness exceeding 2 units and therefore discernible to the naked eye (p<0.0001); however, mean ΔL did not differ significantly with bleaching method or hydrogen peroxide penetration.

This study investigates use of the organosilane 3-(trimethoxysilyl) propyldimethyl octadecyl ammonium chloride (Si-Quat) as a wood treatment to impart residual moisture and organism control on wood substrates. Study 1, which utilized experimental testing procedures to evaluate mold growth after standardized heat treatment, indicated less surface mold on treated samples. Study 2, which utilized standardized testing procedures to evaluate Si-Quat treated wood’s resistance to subterranean termite attack, indicated greater termite mortality and less feeding on treated wood, as well as increased termite feeding preference for untreated wood. Study 3, which utilized standardized testing procedures to evaluate water repellency, indicated significantly reduced moisture gain at higher silane-based treatment levels in comparison to untreated wood. It is concluded that a silane based treatment utilized in this study can be effective for organism control and the possible supplementation to current phytosanitation of wood packaging materials.

ABSTRACT Three different genotypes of sugar beet (diploid, triploid and tetraploid) / 4 varieties from diploid and triploid genotypes Soraya (KWS8123) and Leila (diploid), Visa (H68121) and Kassandra (triploid) and 2 lines from tetraploid genotype &Ccedil / BM315 and EA2075 (tetraploid) were used for investigating the effects of ploidy level on plant regeneration. Within three sugar beet genotypes, with respect to the treatments, triploids or tetraploids were found to respond to treatments significantly different when compared with diploids. The responses of polyploids were superior over the responses of diploids. Moreover, varieties from same genotype responded differently to treatments. Two types of calli were obtained / one white and friable with regenerative capacity and the other green and compact with no regenerative capacity. Concentration of sucrose on callus development was observed to be important. High concentration of sucrose (30 g/L) was found to cause discoloration and irresponsiveness of formed calli at callus enlargement and subsequent shoot regeneration stages. Therefore, low concentration (10 g/L) is advised to be used at these stages / although this caused less callus induction. Although initially used for the prevention of tissue discoloration, L-ascorbic acid inclusion into the medium was found to be positively affecting the regeneration capacity. When used at 20 mg/100 mL concentration, the only two spontaneous shoots from the tetraploid EA2075 line were obtained. Subsequently, these shoots were successfully rooted and whole plants were obtained. The effect of silver nitrate, in combination with L-ascorbic acid, on the prevention of sugar beet tissue discoloration was investigated. Unfortunately, the symptoms of discoloration did not diminish. Moreover, callus formation was reduced and the subsequent shoot recovery could not be achieved. Since a total of 3456 explants were used during this study, and only 2 whole plants were regenerated, the efficiency of plant recovery was calculated as a rather low value of 0.058 %.

abstract: Encapsulant is a key packaging component of photovoltaic (PV) modules, which protects the solar cell from physical, environmental and electrical damages. Ethylene-vinyl acetate (EVA) is one of the major encapsulant materials used in the PV industry. This work focuses on indoor accelerated ultraviolet (UV) stress testing and characterization to investigate the EVA discoloration and delamination in PV modules by using various non-destructive characterization techniques, including current-voltage (IV) measurements, UV fluorescence (UVf) and colorimetry measurements. Mini-modules with glass/EVA/cell/EVA/backsheet construction were fabricated in the laboratory with two types of EVA, UV-cut EVA (UVC) and UV-pass EVA (UVP). The accelerated UV testing was performed in a UV chamber equipped with UV lights at an ambient temperature of 50°C, little or no humidity and total UV dosage of 400 kWh/m2. The mini-modules were maintained at three different temperatures through UV light heating by placing different thickness of thermal insulation sheets over the backsheet. Also, prior to thermal insulation sheet placement, the backsheet and laminate edges were fully covered with aluminum tape to prevent oxygen diffusion into the module and hence the photobleaching reaction. The characterization results showed that mini-modules with UV-cut EVA suffered from discoloration while the modules with UV-pass EVA suffered from delamination. UVf imaging technique has the capability to identify the discoloration region in the UVC modules in the very early stage when the discoloration is not visible to the naked eyes, whereas Isc measurement is unable to measure the performance loss until the color becomes visibly darker. YI also provides the direct evidence of yellowing in the encapsulant. As expected, the extent of degradation due to discoloration increases with the increase in module temperature. The Isc loss is dictated by both the regions – discolored area at the center and non-discolored area at the cell edges, whereas the YI is only determined at the discolored region due to low probe area. This led to the limited correlation between Isc and YI in UVC modules. In case of UVP modules, UV radiation has caused an adverse impact on the interfacial adhesion between the EVA and solar cell, which was detected from UVf images and severe Isc loss. No change in YI confirms that the reason for Isc loss is not due to yellowing but the delamination. Further, the activation energy of encapsulant discoloration was estimated by using Arrhenius model on two types of data, %Isc drop and ΔYI. The Ea determined from the change in YI data for the EVA encapsulant discoloration reaction without the influence of oxygen and humidity is 0.61 eV. Based on the activation energy determined in this work and hourly weather data of any site, the degradation rate for the encaspulant browning mode can be estimated. / Dissertation/Thesis / Masters Thesis Chemical Engineering 2018

Les diagnostics d’hypominéralisations molaire-incisive (HMI) et de colorations post-mortem de l’émail sont peu fiables et reproductibles dans des séries archéologiques. Notre guide de diagnostic a permis de distinguer les hypominéralisations de l’émail des colorations taphonomiques. L'émail hypominéralisé est caractérisé par des taux de β-carbonate plus élevés et une densité minérale plus faible. Les colorations taphonomiques présentent une concentration plus élevée en manganèse, en fer, en cuivre et en plomb, mises en évidences par des analyses en fluorescence X. Les dentures d’individus immatures issus de 21 séries archéologiques ont été examinés et comprenaient : 4 séries françaises, Sains-en-Gohelle (Pas-de-Calais), Cognac-Saint-Martin (Charente), Beauvais (Oise) et Jau-Dignac-et-Loirac (Gironde) provenant de cimetières médiévaux et post-médiévaux et 17 séries anglaises (Londres) provenant de cimetières romains, médiévaux et post-médiévaux. Nous avons dénombré 555 individus dont l’âge au décès est compris entre 5 et 19 ans et dont la datation chronologique s’étale sur une période allant du 1er au 19ème siècle. Au total, sur les 290 individus avec au moins une première molaire permanente (PMP) présente, 42 avaient au moins une opacité délimitée de l’émail sur une PMP (soit 14,5%). Parmi les 17 individus dont les dents ont été analysées, les tests statistiques n’ont mis en évidence que 9 cas de HMI, soit 52,9% de l’effectif. Une prévalence de 9,3% de HMI a été estimée dans nos séries archéologiques ce qui avoisine les prévalences connues à l’heure actuelle dans les populations du vivant en Europe. Les défauts du développement de d'émail sont souvent utilisés comme indicateurs de la santé générale dans les populations archéologiques passées. La possibilité de trouver des HMI dans des populations anciennes minimise l’importance de certaines hypothèses étiologiques contemporaines (par exemple les dérivés de dioxines, les bisphénols ou les antibiotiques) sans exclure l'aspect multifactoriel possible de l'anomalie. / Developmental enamel defects are often used as indicators of general health in past archaeological populations. It can be difficult to macroscopically distinguish subtle hypomineralised enamel opacities such as Molar Incisor Hypomineralisation (MIH) from post-mortem staining. The diagnostic guide developed enables the differentiation of developmental hypomineralisation of enamel from taphonomic discolorations. Hypomineralised enamel had higher β-carbonate rates and lower mineral density. Taphonomic discoloration had higher concentration of manganese, iron, copper and lead, determined by means of X-ray fluorescence analyses. Sub adults from 21 archaeological series were examined and included: 4 French series, Sains-en-Gohelle (Pas-de-Calais), Cognac-Saint-Martin (Charente), Beauvais (Oise) and Jau-Dignac-et-Loirac (Gironde) from medieval and post-medieval cemeteries and 17 English series (London) from Roman, medieval and post-medieval cemeteries. We recorded 555 individuals aged between 5-19 years dating from 1st to 19th century. Among 290 specimens with at least one first permanent molar (FPM) present, 42 showed at least one FPM opacity (14.5%). Among the 17 individuals whose teeth were analysed, statistics highlighted 9 cases of MIH (52.9%). MIH prevalence of 9.3% was estimated among the archaeological series which is close to prevalence in living populations in Europe. The identification of MIH among past populations downplays contemporary aetiological hypotheses (e.g. dioxins, bisphenols, antibiotics) without excluding multifactorial aetiology of this pathology.

SyfteAtt utvärdera effekterna och bieffekterna av tandblekningsprodukter innehållande eller utsöndrande av väteperoxid på permanenta tänder hos personer under 18 år. Studien gjordes med tanke på barn som drabbats av missfärgade tänder med ett objektivt och subjektivt behandlingsbehov. Detta i syfte att insamla all nuvarande forskning på området samt ställa detta mot EU-direktiven utfärdade 2012. SökstrategierEn systematisk sökning av litteraturen gjordes i databaserna Medline, Cochrane, Embase och Scopus. Inkluderade artiklar skulle vara på antingen Engelska, Svenska, Danska eller Norska. SelektionskriterierStudierna skulle vara gjorda på personer under 18 år med produkter som innehöll eller utsöndrande väteperoxid. Enbart studier på permanenta tänder inkluderades. Studierna var tvungna att utvärdera positiva och/eller negativa effekter av behandlingen. Blekningen skulle utföras in vivo. Fallrapporter inkluderades enbart i syfte att finna eventuella allvarliga bieffekter. ResultatTotalt identifierades 214 artiklar varav 13 stycken uppfyllde inkluderings- och exkluderings-kriterierna. Fyra studier bedömdes ha låg risk av bias, åtta av medelhög samt en som hög risk av bias. Syftet och studiedesignen varierade mellan de inkluderade studierna. De flesta studierna var utförda på mildare missfärgningar samtidigt som de saknade erforderliga uppföljningstider. SlutsatsDet finns inte tillräckligt med studier gjorda på personer under 18 år som utvärderar effekterna av bleking med väteperoxid på fall med mer omfattande missfärgningar. Ett begränsat antal studier med medelhög risk av bias ger ett visst stöd för blekning med väteperoxid på mildare fall av missfärgningar. Samtidigt rapporterades ett stort antal milda, övergående bieffekter. Tills motsatsen bevisats finns ett etiskt stöd för EU-direktiven etablerade 2012. / AimTo investigate the effects and adverse events of tooth whitening performed on children with permanent teeth by the use of products containing or releasing hydrogen peroxide. This was made considering children affected by objectively and subjectively observed tooth discolorations in purpose to consolidate existing research and compare it to the EU directives established 2012.Search strategiesA systematic search of the literature was conducted using the databases Medline, Cochrane, Embase and Scopus. Only studies published in English, Swedish, Danish and Norwegian were included. Selection criteriaThe selection criteria aimed to include studies performed on patients under the age of 18, using whitening products containing or releasing hydrogen peroxide. The bleaching process had to be performed in vivo on permanent teeth. Case reports were included only to be separately reviewed looking for severe side effects and adverse events.ResultsA total of 214 articles were identified and 13 met the inclusion criteria. Four papers were judged to have a low risk of bias, eight a moderate risk and one a high risk of bias. Most studies were performed on mild discolorations while they lacked in necessary follow-up times.ConclusionThere are not enough studies evaluating the effect of using hydrogen peroxide to bleach more severe discolorations on individuals under 18 years old. A limited number of studies showed some support for bleaching with hydrogen peroxide on mild tooth discolorations. Parallel to this, the included studies demonstrated a high number of mild and transient adverse events. Until proven otherwise, the lack of studies gives some ethical support to the EU-directives established 2012.

Thesis (PhD (Forest and Wood Science))--University of Stellenbosch, 2006. / The discolouration of South African softwood during kiln drying can reduce the value of furniture grade lumber. Thermal discolouration of wood, as found due to heat treatment, produces a homogeneously browner colour in wood than is normally expected. This type of discolouration is attributed to reactions of the macromolecules present in wood and is found in both hard- and softwoods. Yellow stain and kiln brown stain can severely alter the colour of the outer few millimeters of a wooden board and is attributed to the reaction of water-soluble sugars and nitrogenous compounds, present in the wood sap, after deposition at the wood surface due to liquid or capillary water flow during drying. A discussion of the mechanism of discolouration due to yellow stain and kiln brown stain would be incomplete without a good understanding of the liquid flow of water during drying above fibre saturation point. This thesis brings the two concepts of liquid water flow and discolouration in context and is presented in four chapters: • an introduction motivating the aims of the investigation (Chapter 1); • a literature review of factors which may influence discolouration and liquid water flow during drying (Chapter 2); • original manuscripts describing the discolouration of South African softwood and liquid water flow in hard- and softwood (Chapter 3); and • a final conclusion that links up the results from the investigations (Chapter 4). The investigations into the occurrence of yellow stain and kiln brown stain showed that the intensity of these types of discolouration was influenced by geographical origin (and/or climate), tree species, planing depth of dried lumber, and kiln schedule parameters like dry- and wet bulb temperature and time. The characteristic discolouration pattern of yellow stain and kiln brown stain indicated that this stain type was related to the wetline phenomenon that is found during the liquid water flow phase of drying wet wood. Thermal discolouration, on the other hand, occurred homogeneously throughout the volume of lumber and is, therefore, not related to free water flow, but to chemical changes of the macromolecules in wood. The results of the liquid water flow investigations support the invasion percolation theory of drying that states that the largest meniscus will retract into a drying liquid-filled capillary network until it is not the largest meniscus anymore. Fluctuations in the rate of moisture loss from the cores of wood pieces above fibre saturation point were also found. The pattern of fluctuation differed appreciably between Betula verrucosa and Pinus radiata. In both cases, the start of the last phase in rate of moisture loss from the core coincided with a reduction in the cross-sectional area of the drying wood piece. This behaviour is explained by the hypothesis that distinct capillary size classes are emptied of free water, in order, from large to small. As smaller capillaries are emptied, the capillary forces become greater, to the point where the forces are great enough to cause permanent or temporary deformation of the remaining water-filled capillaries. Classification and regression tree analysis was a useful statistical technique to analyse a large multivariate dataset. The importance of kiln schedule temperatures and planing depth to control yellow stain and kiln brown stain was clearly pointed out by the technique, which can help to simplify the control of colour quality during the industrial processing of wood.

For a PV plant it is of fundamental importance that the operation of the PV modules is free from faults or at least that the faults can be detected early, to ensure efficient electricity production. Some defects such as cracks can be seen in visible light while microcracks and damage to the silicon material can only be seen through special lighting. This study focuses on the most common defects in photovoltaic (PV) systems. Compare the infrared (IR) technology with the new ultraviolet (UV) fluorescence image technique for PV characterization, based on their accuracy and uncertainty factors under an experimental field investigation. In this study, first a literature study was conducted to the most common defects in PV system and their impact on electricity generation. Then a simulation model of a PV system was created in PVsyst and exported to Microsoft Excel which was used to evaluate how different defects at different stages of the PV cell's life cycle impact electricity generation, performance parameters and economic exchange. Furthermore, experiments with UV and IR was implemented at a PV system located in Dalarna and some PV modules at MDH. It was conducted that occurrence of snail tracks, delamination and hot spots in combination with bypass failures and non-functioning cell will affect the economic profitability in the long run and the payback time will increase since their impacts on electricity generation and performance parameters are huge. The worst case is when PV modules are affected by the fault in bypass diode and non-functioning cell which result to a payback time longer than the module's lifetime and huge amount electricity losses in different bypass diodes configurations. Since UV and IR are two different methods that are performed in two different ways, different errors occurred during the measurements. The biggest external factor was the weather that determined if the experiment could be implemented. The IR method gave decent results and was quicker to use, but the UV method highlighted some defect which could not be seen with the IR technology.

O desenvolvimento de cimentos endodônticos com maior capacidade antimicrobiana, leva a associação de cimentos endodônticos com agentes antimicrobianos. O vanadato de prata nanoestruturado decorado com nanopartículas de prata (AgVO3) é um nanomaterial com capacidade antimicrobiana com aplicação na odontologia. O objetivo desse trabalho foi avaliar quatro cimentos endodônticos (AH Plus, Sealapex, Sealer 26 e Endofill) incorporados com AgVO3, em diferentes concentrações (0%, 2,5%, 5% e 10%), através de testes in vitro de concentração inibitória mínima (CIM) e capacidade antimicrobiana (difusão em ágar) (n=6) frente aos micro-organismos: Enterococcus faecalis, Pseudomonas aeruginosa, Escherichia coli. Testes das propriedades físicas de escoamento (n=6), radiopacidade (n=5), teste de alteração de cor da estrutura dental (n=3) e padrão de distribuição superficial do AgVO3 aos cimentos endodônticos (n=5) foram realizados. Para análise estatística da capacidade antimicrobiana e escoamento foram realizados teste paramétrico 2-way ANOVA e teste de Tukey honestly significant difference (HSD), os dados da radiopacidade foram analisados pelo teste Kruskal-Wallis e teste de permutação com nível de significância de 5%, e para a alteração de cor realizou-se análise estatística descritiva. A CIM do AgVO3 para E. faecalis foi de 500 &micro;g/mL e para P. aeruginosa e E. coli de 31,25 &micro;g/mL. A incorporação de 10% de AgVO3 promoveu maior atividade antimicrobiana a todos os cimentos frente a E. coli, ao Sealer 26 e Sealapex frente a E. faecalis e ao AH Plus e Endofill frente a P. aeruginosa (p<0,05). A incorporação de AgVO3 não influenciou na atividade antimicrobiana inerente do AH Plus frente a E. faecalis (p>0,05) e não promoveu tal propriedade ao Sealer 26 e Sealapex frente a P. aeruginosa (p>0,05). O escoamento do AH Plus e Endofill reduziu com o aumento da concentração de AgVO3 (p<0,05). Não houve influência no escoamento do Sealer 26 e Sealapex (p>0,05). Todos os grupos apresentaram valores de escoamento dentro do recomendado pela American National Standard/American Dental Association (ANSI/ADA), exceto o AH Plus 10%. O AgVO3 não influenciou na radiopacidade do Endofill (p=0,399) e Sealapex (p=0,316), e a concentração de 2,5% do Sealer 26 e AH Plus apresentou maior radiopacidade em relação ao controle (p=0,022 e p=0,006, respectivamente), que não diferiu dos demais grupos (p>0,05). Todos cimentos incorporados com AgVO3 apresentaram maiores alterações de cor após 180 dias, a menor alteração foi do Endofill 10% e a maior do Sealer 26 10%. O AgVO3 apresentou um padrão de distribuição superficial circular na composição dos cimentos endodônticos. Concluiu-se que a incorporação do AgVO3 tem potencial para aumentar a atividade antimicrobiana dos cimentos endodônticos avaliados, não influenciou no escoamento do Sealer 26 e Sealapex, e na radiopacidade dos cimentos avaliados. Os grupos incorporados com AgVO3 apresentaram maior alteração de cor com 180 dias, exceto o Endofill 10%. / The development of endodontic sealers with higher antimicrobial capacity, leads to the association of endodontic sealers with antimicrobial agents. The nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) is an antimicrobial nanomaterial with application in dentistry. The aim of this study was to evaluate four endodontic sealers (AH Plus, Sealapex, Sealer 26 and Endofill) incorporated with AgVO3, in different concentrations (0%, 2.5%, 5% and 10%), through in vitro tests of minimum inhibitory concentration (MIC) and antimicrobial capacity (agar diffusion method) (n=6) against microorganisms: Enterococcus faecalis, Pseudomonas aeruginosa, Escherichia coli. Tests on physical properties of flow (n = 6), radiopacity (n = 5), tooth discoloration (n = 3) and superficial distribution pattern of the AgVO3 to endodontic sealers (n = 5) were performed. For statistical analysis of antimicrobial capacity and flow, were performed the 2-way ANOVA parametric test and the Tukey honestly significant difference (HSD) test, the radiopacity data were analyzed by the Kruskal-Wallis test and permutation test with significance level of 5%, and descriptive statistical analysis was performed for tooth discoloration. The MIC of AgVO3 for E. faecalis was 500 &micro;g/mL and for P. aeruginosa and E. coli 31,25 &micro;g/mL. The incorporation of 10% of AgVO3 increased antimicrobial activity to all sealers against E. coli, to Sealer 26 and Sealapex against E. faecalis and to AH Plus and Endofill against P. aeruginosa (p <0.05). The incorporation of AgVO3 did not influence on antimicrobial activity inherent of the AH Plus against E. faecalis (p> 0.05) and did not promote this property to Sealer 26 and Sealapex against P. aeruginosa (p> 0.05). The flow of AH Plus and Endofill decreased with increasing AgVO3 concentration (p <0.05). There was no influence on the flow of Sealer 26 and Sealapex (p> 0.05). The evaluated groups presented flow values within the recommended by the American National Standard/American Dental Association (ASNI/ADA), except the AH Plus 10%. The AgVO3 did not influence the radiopacity of Endofill (p = 0.399) and Sealapex (p = 0.316), the concentration of 2.5% of Sealer 26 and AH Plus presented higher radiopacity than the control (p = 0.022 and p = 0.006, respectively), which did not differ from the other groups (p> 0.05). All sealers incorporated with AgVO3 presented color alterations after 180 days, the lowest change was Endofill 10% and the highest was Sealer 26 10%. The AgVO3 presented a pattern of circular superficial distribution in the composition of the endodontic sealers. It is concluded that the incorporation of AgVO3 has the potential to increase the antimicrobial activity of the endodontic sealers evaluated, did not influence the flow of the Sealer 26 and Sealapex, and the radiopacity of sealers evaluated. The groups incorporated with AgVO3 presented color alterations with 180 days, except Endofill 10%.