This master’s thesis deals with the development of materials for classwork using EPLAN software tools for "XEPL" course. The introductory part describes issues with design in electrical engineering, with an emphasis on the formal aspects of project documentation standards and software tools for design support. Further in the thesis, there is an introduction to the EPLAN software environment. The EPLAN environment modules are presented one by one and the EPLAN Education software is introduced. The next part of this thesis involves a model project in designing electric installation of car washer in the EPLAN Education. The last part of this thesis includes a set of exercises based on this model project, where basic functions of the EPLAN software and their uses are presented.

The following master thesis is devoted to the design of distribution systems of LV (Low Voltage) and HV (High Voltage) voltage levels. The aim of the thesis is to create a complete project documentation for the construction of a new distribution transformer station (22kV/0.4kV) situated directly in the city of Blansko along with a transformer capable of performance of up to 630kVA. Subsequently a design of cable routes of LV and HV is included in the project documentation. The first part of the thesis introduces the fundamental issues and solutions regarding the design of electrical equipment related to the LV and HV voltage levels. Thereafter it deals with proper legislation, technical regulations and related standards. The second part is dealing with project documentation. More precisely analyzing each step in the process and thoroughly going through individual parts of the project documentation. Other focus of the thesis is software resources and tools which are essential for drawing documentation. Then follows a selection of appropriate electrical equipment and budget evaluation. The major portion of the work is a design of distribution transformer station and cable lines of LV and HV. Including dimensioning of the LV and HV switchboards, earthing system and fuse protection system. The essence of all this work serves as a foundation for complete design documentation.

This diploma thesis is concerned with a construction design of single toggle jaw crusher DCJ 900x500. In the first part, the theoretical background and ways of material disintegration are discussed. The second chapter describes types of material crushers in general, especially jaw crushers and their parts. The third chapter is concerned with calculations and the design of the most important parts of the machine. The fourth part consists of the crusher power calculation, design of the pendulum and its production technology. The last part includes the result of FEM analysis for the particular variant of pendulum production. The thesis also includes drawing documentation of the crusher and the pendulum.

The diploma thesis deals with measurement of the interior of a parish building and its close surroundings in Čučice. Necessary steps for creating the thematic map and the building documentation are described in this thesis. First the preparatory work was made, which means that ground reconnaissance was made and required equipment and tools were chosen. In the next part the measurements, which include the construction of an auxiliary measuring network, the measurement of the detailed and control points, are described. After the measurement work, the office work followed, the coordinates and the heights of the auxiliary and detailed points were specified. The accuracy of the map according to ČSN 01 3410 was tested. Finally a thematic map in scale 1: 500 and the building drawings in scale 1:50: 1st floor plan, 2nd floor plan, longitudinal and cross-section were created.

The subject of this diploma thesis is the determination perimeter of the complex land consolidation in the cadastral area Dobronice. Documents for detection of borderlines are prepared on the basis of a defined perimeter. Borderlines of perimeter is examined with an officially appointed commission and with landowners. A geometric plan is made for the partition of the land, determination borderline of lands for land consolidation and running of specify borderlines from landowners. The results of detection borderlines are created in prescribed elaborate.

This diploma thesis focuses mainly on designing projects using BIM technology, specifically on the field of budgeting. In the theoretical part the current 2D project documentation and the current price system is described. Furthermore, the thesis deals with information modeling and its implementation into common building practice. At the end, it is described how to use current pricing system for budgeting in the BIM environment.

This diploma thesis is focused on creation of complex design of constructed wetland for village Bezděčí near Trnávka, which needs to solve the problem of wastewater management. The introductory part of the thesis, which is focused on the research of professional knowledge and information, familiarizes with the problematics of constructed wetlands, focuses on description of technological objects of the constructed wetlands and the description of their functions. Relevant legislation is also mentioned because knowledge of legislation is necessary for the project. The following part of this diploma thesis deals with the design of the constructed wetland itself. Solution of the design is based on the best available technologies that deliver high-quality research results into practice. The proposed root plant meets all the requirements for the quality of the discharged water according to the relevant legislation. An important part of the diploma thesis are annexes, which contain a completely elaborated project documentation for the issuance of a joint permit for the purpose of realization of the new building of a constructed wetland plant for the village Bezděčí near Trnávka.

The aim of the thesis is to propose a variant technical and then a price solution of a family house. It is a comparison of a family house on the same built-up area, the comparison being related to the brickwork made of ceramic fittings and panel woodwork. The text part deals mainly with the explanation of the types of individual buildings and then with the list of the pros and cons of the different technologies, compared buildings. The conclusion mainly concerns the evaluation of budgets and recommendations where it is worth building the compared buildings and why.

The aim of the diploma thesis is the design of a continuous bridge construction of five fields in the direction of the town Albrechtice - Opava. The bridge overcame local roads and railway tracks and is part of the bypass of Albrechtice. From the three proposed variants, a pre-stressed two-beam structure was selected for the detailed solution and it is assessed according to the limit states and includes the effects of gradual construction. Further detailed drawings are drawn up.

This diploma thesis describes the design of showroom and car service of Mazda brand in Trencin. It is a detached building on a flat terrain. The car showroom and car service have two above-ground floors and one underground floor. On the first underground floor there is an underground garage designed for new cars for sale. On the first floor there is a car showroom with a customer base and a car service with facilities for car service staff. On the second floor there are offices with facilities for staff. The building is designed from a reinforced concrete structure and porous concrete blocks. The ceilings are monolithic reinforced concrete and the roof is designed as flat with trusses and reinforced concrete slab. The work includes project documentation for the construction.