The thesis is focused on the comprehensive solution of the flood protection measures of the town Oslava on the river Oslava. The territory was subjected to a risk analysis with a graphical representation of risk in the area and potential damage to the property was calculated. In continuity has been proposed appropriate flood protection measure to reduce damage. The economic effectiveness of the measures was carried out and other documentation required for the underlimit tender of the project was elaborated. In the conclusion of the diploma thesis there is another possible use of the diploma thesis.

The aim of the work was design and realization of device to simplify and speed up the testing of AWS / TPWS train protection system. The first chapter is addressed to description and division of train protection systems. The next chapter describes the process of commissioning the AWS / TPWS system and possible applycation of the device to this process. The final chapters deal with design, specification of components, realization of device and verification of its functionality.

The thesis deals with determining the quotient of usable area and the built-up area for houses in a specific location and analyzes the influence over size of quotient according to variables in process of determining.

The diploma thesis deals with the design of manipulator construction for folding two-part molds. In the thesis, an analysis of the current state of knowledge in the field of handling equipment and industrial robots is generally performed. Subsequently, the work introduces the current issue of handling equipment that is used in foundry. Furthermore, the work deals with the analysis of the manipulator construction, choosing the appropriate solution for the construction of its own handling equipment. Design solution is supported by computational message, 3D model and drawing documentation of selected nodes. The conclusion is devoted to the evaluation of work and practical recommendations.

Tato diplomová práce se zabývá návrhem multifunkční budovy, která slouží jako rozšíření haly dříve existující budovy. Areál se nachází v části Řečkovice v Brně. Práce si klade za cíl propojit budovy jak prostorově, tak vizuálně. Výrobní hala a sklad budou rozšířeny. Poslední patro bude sloužit jako administrativní část se sociálním zařízením a venkovní terasou. Proces návrhu byl plně podporován použitím technologie BIM.

The diploma thesis contains a proposal and construction solution of a new nursery school in the village of Postřelmov in the stage of project documentation for construction. The kindergarten has a rectangular shape and has two above-ground floors and one basement floor. The main entrance to the building is wheelchair accessible and is oriented to the south. In the basement there are 26 parking places for employees of kindergarten and elementary school in Postřelmov and also a technical background. The first floor consists of two classes of kindergarten, on the second floor there is the third class and a large hall, which will be used mainly for cultural events in the kindergarten. The foundation structure is made up of concrete strips and the foundation foots are designed in places of garage parking. The vertical structures in the basement are designed from concrete fittings, the vertical load-bearing structures in the above-ground floors are designed in the Porotherm masonry system, the other non-load-bearing structures are designed in the Ytong system. Due to the large spans, the horizontal structures are designed from prestressed Spiroll ceiling panels. The roofing of the building consists of a flat green extensive roof. The project documentation also includes construction - physical assessment and fire - safety solution of the building.

This diploma thesis deals with the proposal of the municipal office in Olomouc for the part Hodolany. The municipal office is a detached building with indoor and outdoor parking spaces. The building has four floors, one underground and three above ground. In the underground floor there are archives of all departments of the office and the air-conditioning of the building, a large part of the first floor are ga-rage parking, there i salso a Café and a representative hall. On the second floor there is the seat of the office management, building office and transport department. On the top floor you will find the OP-RP-CP cabins, the HR department and the archive with server. A lift and a 3-aisle staircase are used to cennect the individual floors. The building is designed from structural systém of ceramic fittings and part of the foundations of paermanent formwork. The ceilings are assembled from ceramic fittings with reinforced concrete. This ceiling also forms the supporting part of singleskin flat vegetation roofs. The thesis cantains project documentation for construction.

This diploma thesis focused on designing of systematic wiring of multifunctional sports centrum. The work is divided into two parts. The first part of the work is dealing with definitions and principles necessary for electrical project documentation. There is a presentation of the KNX bus control system, which is chosen for the implementation of the systematic wiring of the sports centrum. There is also an overview of currently used systems for wiring control. At the end, the design of artificial and emergency lighting is processed using a computer program. The content of the second part of the work is a complete project documentation for construction of the multifunctional sports hall using the KNX bus system. Furthermore, the documentation draws the design of power and data distribution to the relevant floor plans of the building, the design of power and system switchboards, an overview scheme of power distribution, topology of the KNX system, budget and technical report.

The diploma thesis deals with measurement of former Peklo inn in Tišnov and creates a documentation of its building. Measurement is connected to the binding reference system – the S-JTSK coordinate sytem and Baltic Vertical Datum Bpv. The thesis countains a description of the place of interest and history of the building, preparatory work, choice of instruments and tools. In the next part measurement, processed of recorded data, requirements of creating documentation of the ground plan and vertical section, testing results of the work, are described. The thesis countains ground plan of the cellar, ground plan of the second floor and the vertical section of the building in scale of 1:50. Outcomes of thesis will serve as documentation of the current conditions of the building.

The diploma thesis deals with the issue of audit of financial statements from the perspective of the auditor and documentation of his procedures. The first part defines the basic concepts in this area and further describes the audit procedures and proposes an effective system of audit procedures applied to selected companies.