This thesis deals with the application of ISO 9001:2008 requirements on documentation in an international company providing services. First, it approaches the importance of the ISO 9001 and shows documentation requirements introduced in the standard. The analytic part presents how the standard was applied in the quality documentation of Germanischer Lloyd. Special emphasis is laid on a project which focused on a complete revision of the quality documentation in the company. The greatest changes include a new structure of documentation, an update of the majority of the documents and increasing the user friendliness of the documents' organisation.

Orientador: Eduardo Daruge Junior / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba / Made available in DSpace on 2018-08-27T10:53:09Z (GMT). No. of bitstreams: 1 Simoes_MarciaPereira_M.pdf: 900774 bytes, checksum: 21e06f182c1dee39faba9e25721f37f7 (MD5) Previous issue date: 2015 / Resumo: A violência interpessoal urbana representa um sério desafio para autoridades e gestores públicos. Este estudo investigou o trauma buco-maxilo-facial decorrente de violência interpessoal quanto à epidemiologia e implicações criminais, bem como avaliou a importância da documentação clínica nos exames de corpo de delito. Foi realizado estudo observacional retrospectivo envolvendo 1.048 relatórios odontológicos de corpo de delito gerados nos anos de 2012 e 2013, na cidade do Rio de Janeiro, RJ, Brasil. Violência interpessoal foi causa de trauma buco-maxilo-facial em 405 (38,6%) exames, envolvendo principalmente homens jovens, brancos e solteiros. O agente lesivo mais comum foi o soco. Os tecidos moles foram os mais lesionados, sendo a equimose a lesão prevalente. Os ossos mais fraturados foram maxila e mandíbula. Os dentes anteriores mostraram maior incidência de fraturas coronárias. Quanto à classificação penal, predominou o dano corporal leve, sendo que as lesões somente aos dentes implicaram dano leve, grave e gravíssimo. Houve apresentação de documentação clínica em 132 (32,6%) exames periciais. O trauma buco-maxilo-facial decorrente de violência interpessoal alcançou níveis preocupantes nos dois anos do estudo, representando a documentação clínica importante meio de prova particularmente nos exames de corpo de delito indireto. Sugere-se a realização de estudos epidemiológicos periódicos, que abranjam as demais regiões do Estado do Rio de Janeiro e do país para análise mais completa do fenômeno, bem como a participação do cirurgião-dentista como membro efetivo das equipes forenses / Abstract: The urban interpersonal violence represents a serious challenge for public authorities and managers. This study aimed to investigate the oral maxillofacial trauma caused by interpersonal violence regarding its epidemiologic and criminal implication aspects, as well as to evaluate the importance of clinical documentation in forensic exams. A retrospective observational study has been conducted involving 1,048 forensic dental reports generated in the years 2012 and 2013 in the city of Rio de Janeiro, RJ, Brazil. Interpersonal violence was the cause of oral maxillofacial trauma in 405 (38.6%) exams, involving mainly young, white and unmarried men. The most common harmful agent was the punch. The soft tissues were most injured, being bruise the predominant injury. The more fractured bones were maxilla and mandible. Anterior teeth showed a higher incidence of crown fractures. Regarding criminal classification, light body damage predominated and teeth-only injuries implied light, severe and very severe damage. There was presentation of clinical documentation in 132 (32.6%) forensic exams. It was found that the oral maxillofacial trauma due to interpersonal violence has reached alarming levels in both years of study, being the clinical documentation an important mean of obtaining evidence, particularly in indirect forensic examination. It is suggested to carry out epidemiological studies covering other regions of the State of Rio de Janeiro and the country for more detailed analysis of the phenomenon, as well as the participation of the dentist as an effective forensic team member / Mestrado / Odontologia Legal e Deontologia / Mestra em Biologia Buco-Dental

Master of Science

The master’s thesis is aimed at creation of project documentation used in power engineering, specifically the creation of schemes in the field of secondary technology. It deals with the basics of marking used by distribution system operators in the Czech Republic, the levels of documentation necessary for the construction or reconstruction of the electrical equipment itself. The aim of this master’s thesis is to design the switchboard with two design solutions using two different types of software. Used software will be Autocad LT as a representative of the CAD system and Ruplan EVU as CAE software. Based on the experience gained in designing and pre-defined aspects, at the end of thesis determine software that is more suited to designing.

The subject of diploma thesis is geodetic survey of real state of object with historical meaning in municipality Vikantice and subsequent creation of drawing documentation and 3D model of that building. The purpose was to create documentation that will serve as remembrance for owner of thebuilding. Text part of thesis describes locality, measurement procedures and processing methods, process of creation drawing documentation of building and 3D model. Overall result of thesis include drawings of floor plans and sections in electronical and printed form, 3D model in electronical form and preview of elevations in printed form.

This thesis deals with the issues of locating and marking both metalic and optical transmission network. The choice of an appropriate program for creation and management of map document is discussed. In the following chapter some necessary adjustments to the ArcGIS ArcView program are made so that it is applicable to the field of telecommunication networks. The last chapter addresses the design of documentation options in optical transmission network. For metalic cables the possibilities of attaching transmitter to a cable and locating the induced magnetic field is covered. Among the methods for finding optical cables we list ways of locating through the use of markers, GPS location and added metalic conductors. Fundamentals of markers and their types are thoroughly analysed. In the chapter on GPS we examine how this system works and evaluate its accuracy. The next chapter enumerates requirements that a program should meet. We analyse properties of considered programs and evaluate them with respect to these requirements. For a chosen program the possibilities of enriching it with selected map document are discussed. For these map document, information about their applicability and source is presented. We also quote the cost for these maps wherever possible. The last chapter treats ways of documenting optical networks.

This thesis is engaged in geodetic works related to the increase of the capacity of the road II/497 and the modification of the intersection with the road I/55 in the town of Uherské Hradiště. The work is mostly focused on the field of the engineering geodesy. It resolves the issues from the alignment during the construction to the focus of the construction itself. Individual survey procedures are analyzed in the context of the prescribed deviations specified in the project documentation or ČSN. Geodetic documentation for the selected measurements is worked out.

The principal purpose of master´s thesis is draft of new library building and elaboration project documentation of construction section to the realization solved new building of library, which fills its proposed function and also offers the elementar technical requirements for buildings definite in valid written law.

The purpose of this thesis is the creation of documentation of the St. Michael the Archangel church in Dolní Věstonice village, which includes topographic situation of the object, drawing of the first floor, vertical and longitudinal sections and outdoor views of the façades. The church, it’s location and chronological description of all activities is included in the text of the thesis. Chapter named Preparatory work describes reconnaissance of current point field, creation of network of extra points for measuring and sketches preparation. The next section describes the methods used for positional and height measurement of detailed and assist points. The following chapter entitled Office work includes description of all the calculations and the making of individual drawings. The summary of results and the possibility of future use of the created documentation is described in the end of this thesis. All drawings, calculations reports and the accuracy testing of detailed points are found in the annexes.

This thesis deals with the quality management system in furniture company Spartan a.s . The aim was to analyze the quality management system. The first part is a general description of the history and development management of quality. In the second part are identified maps of major and minor processes inside the organization. In the third part there is a proposal for a new documentation of beginning production process.