O presente trabalho apresenta um estudo numérico dos efeitos da aplicação de geometrias geradoras de vórtices, com intuito de controlar passivamente a camada limite, em um perfil aerodinâmico que integra a asa traseira de multi elementos de um veículo de Fórmula SAE. As equações de Navier-Stokes com médias de Reynolds foram resolvidas utilizando o modelo k-ω SST (Shear Stress Transport) para o problema de fechamento da turbulência. Uma metodologia numérica padrão foi definida e utilizada nos diferentes casos analisados. Domínio de cálculo, malha, condições de contorno e critério de convergência foram escolhidos com base em norma SAE para análise numérica de escoamento externo em veículos terrestres. As camadas de volumes prismáticos próximos as superfícies com não-deslizamento foram dimensionadas de forma a resultar em um tratamento de parede adequado ao modelo de turbulência aplicado. O método GCI (Grid Convergence Index) foi utilizado para avaliar a qualidade da malha. Com o intuito de reduzir o custo computacional nos testes com diferentes configurações de geradores de vórtices, apenas parte de interesse do domínio de cálculo foi resolvido, impondo perfis de velocidade, energia cinética da turbulência e dissipação específica em sua entrada. Estas condições foram importadas da simulação com domínio completo resolvida Para verificar a correta captação dos principais efeitos físicos envolvidos, comparações com resultados experimentais foram feitas para 2 casos com escoamentos representativos: o corpo de Ahmed e um perfil aerodinâmico com geradores de vórtices. Além disso, as diferenças entre resolver o domínio completo ou parcial foram estudadas em outro comparativo com resultados experimentais. Concluiu-se que a metodologia numérica foi capaz de obter os coeficientes aerodinâmicos, e suas tendências frente a mudanças de geometria, nos casos estudados. Resolver parcialmente o domínio, impondo perfis em sua entrada, acarretou em diferença nos coeficientes obtidos na ordem de 2% para o coeficiente de sustentação e 7% para o coeficiente de arrasto. O controle passivo via geradores de vórtices foi eficaz em atrasar a separação da camada limite no flap do veículo de Fórmula SAE, as melhoras nos coeficientes de arrasto e sustentação foram da ordem de 7% e 0,3%, respectivamente. / The present work is a numerical study of the effects of the application of vortex generating geometries, in order to passively control the boundary layer, in an aerodynamic profile that integrates a multi-element rear wing of a Formula SAE vehicle. The Reynolds Averaged Navier-Stokes equations were solved using the k-ω Shear Stress Transport model for the turbulence closure problem. A standard numerical methodology was defined and used in the different cases analyzed. Computational domain, mesh, boundary conditions and convergence criteria were chosen based on SAE standard for numerical analysis of external flow in land vehicles. The layers of prismatic volumes near the non-slip surfaces were dimensioned to result in a wall treatment suitable to the applied turbulence model. The Grid Convergence Index (GCI) method was applied to evaluate the mesh quality. In order to reduce the computational cost in tests with different vortex generators configurations, only the part of interest of the calculation domain was solved, imposing velocity, turbulent kinetic energy and specific dissipation profiles on its inlet These conditions were imported from the full domain simulation already solved. To verify the correct capture of the main physical effects involved, comparisons with experimental results were made for 2 cases with representative flows: the Ahmed body and an aerodynamic profile with vortex generators. In addition, the differences between solving the complete or partial domain were studied in another comparative with experimental results. It was concluded that the numerical methodology was able to obtain the aerodynamic coefficients, and their tendencies against changes of geometry, in the cases studied. Partially solving the domain, imposing profiles at its entrance, resulted in a difference in the coefficients obtained in the order of 2% for the lift coefficient and 7% for the drag coefficient. The passive control via vortex generators was effective in delaying the separation of the boundary layer on the flap of the Formula SAE vehicle, the improvements in drag and lift coefficients were of the order of 7% and 0,3%, respectively.

En omvänd aktiesplit minskar antalet aktier på marknaden och höjer kursen vilket kan göras i olika syften, däribland för att göra aktien mer attraktiv och lättare att handla. På en effektiv marknad bör en sådan åtgärd inte ha någon effekt på aktiekursen. Däremot tenderar en omvänd aktiesplit att sända negativa signaler till marknaden. Det har gjorts få tidigare studier bland svenska företag som genomfört en omvänd aktiesplit. Uppsatsen ämnar att undersöka hur den svenska marknaden reagerar på en omvänd aktiesplit och om företagskaraktäristiska mönster som funnits på den amerikanska marknaden överensstämmer med den svenska marknaden. De omvända aktiesplittar som undersöks är gjorda mellan 2001-2020 på Spotlight Stock Market, Nasdaq First North och Nasdaq Stockholm.   Marknadens reaktion mäts på kort och lång sikt genom en eventstudie vars resultat påvisar en signifikant negativ abnormal avkastning på både kort och lång sikt. Företagens överlevnadsförmåga prediceras i en logistisk regression. Fler svenska än amerikanska företag tycks överleva en omvänd aktiesplit. Företagens storlek och tid som noterat bolag har ett signifikant positivt samband med förmågan att överleva som noterat bolag.

Benefits of developing missions with multiple formation flying spacecraft as an alternative to a traditional monolithic vehicle are becoming apparent. In some cases, these missions can lower cost and increase flexibility among other situational advantages. However, there are various limitations that are imposed by these missions that are centered on the concept of maintaining the necessary formation. One such limitation is that of the propulsion system required for each spacecraft. To mitigate the complexity and mass of the onboard propulsion, the pairing of electromagnetic actuators and differential drag to replace the functionality of a propulsive system is investigated. By using COTS magnetorquer boards to command satellite orientation, a scenario in which two 3U CubeSats are initially deployed from the ISS NanoRacks at an altitude of 400 km. They are then commanded to achieve a relative separation of 1 km and hold the spacing to demonstrate the capability of formation flight. The scenario was simulated through the MATLAB/Simulink platform and the magnitude of the necessary command torques were determined. By comparison to the ISIS magnetorquer board, the necessary command torques seem relatively high than compared to what the actuator is capable of. The ISIS board may supply ~5e-6 Nm of torque while the mission requires as much as 3e-3 Nm at times. However, by extending the settling time of the control law at the expense of absolute orientation control, the control torques necessary to carry out the simulated mission are well within the bounds of the ISIS magnetorquer boards as well as other COTS boards. With this alteration, mission feasibility is determined. It should be noted that further analysis should be conducted regarding concerns with CubeSat detumble to further confirm feasibility.

No description available.

Minimizing wave drag is critical to successful and efficient transonic and supersonic flight. Area-ruling is the process of managing the cross-sectional area of an aircraft to lessen the wave drag experienced in flight. Effectively calculating the necessary areas for a given aircraft can be difficult, and existing tools for conducting a wave drag analysis often carry limitations in both functionality and availability. In this work, the author utilized an existing parametric geometry tool named OpenVSP to create an interactive design tool for approximating zero-lift wave drag. Here, the wave drag calculation methodology used in industry for decades is combined with the powerful geometry engine of OpenVSP, which was recently heavily upgraded at the start of 2015. Various visual aids allow users of this OpenVSP wave drag tool to interact with area and wave drag results and develop intuition for supersonic aircraft design using the area rule approach. OpenVSP allows geometry changes to be made quickly, enabling rapid reanalysis by the wave drag tool for expeditious comparison of results across the design space.

This thesis deals with road loads, coastdown tests and evaluation of measured data. Thesis consists of two main parts: theoretical and computational. The first part describes road loads with focus on aerodynamic drag and lift force. In the second part, a software tool for processing the measurement per ISO 10521-1 is designed and lift force measured with running resistance method is calculated.

The master's thesis deals with the aerodynamic interaction od two vehicles, modelling in CFD software, how the vehicle behaves in leeward.

This diploma thesis is focused on CFD simulation of two platooning DrivAer cars with varying bodyworks. CFD models are made for bodywork variants Estateback, Fastback and Notchback, which are solved by k-epsilon turbulent model. Influence of rear body design on platooning and aerodynamics characteristics is analyzed.

The master's thesis deals with the aerodynamic interaction od two vehicles, modelling in CFD software, how the vehicle behaves in leeward.

This thesis deals with the effect of the aerodynamic forces on a vehicle. It contains the description of the test run of the vehicle, the proposal on how to process the measurements, the processing of the measurements themselves, and the final assessment of the results as to their accuracy and the possibility of repeating the experiment. Furthermore, this thesis contains the comparison of the effect of the individual aerodynamic features on the race car.