Diploma thesis deals with design pre-stressed road bridge over the river Svratka. There are designed 3 studies, from which variation of bridge from pre-stressed girders and coupled plate. Thesis solves construction process and static calculation includes time analysis. It is elaborated a detailed structural analysis and bridge is considered a proposal to limit states for temporary and permanent design situations according to European standards - Eurocodes. It is developed drawings and visualization of the bridge.

Diploma thesis deals with design pre-stressed road bridge over the local brook and field road. There are designed 3 studies, from which variation trapezial point-supported pre-stressed concrete slabroad bridge with 3 spans is chosen. In the structural analysis of the bridge structure is assessed at the ultimate limit state and serviceability by European standards – Eurocodes. It is developed drawings and visualization of the bridge.

Master’s thesis describes the design of a highway bridge over the road II/434 and inundation territory. There are some studies designed, from which the main structure was designed as a prestressed concrete double-girder bridge with 5 spans. Loading, design and assessment of structure is solved according to applicable standards CSN and EN. Calculate the effects of the load are carried in calculation program Scia Engineer 2015. Design and asses are carried only by the manual calculation. The thesis includes used materials, construction process, statically analysis and drawing documentation.

Diploma thesis is focused on design of the road bridge across the river Moravská Dyje, close the village Stare Hobzí. The are designed 3 studies of the bridge, of wich the trapezoidal slabroad with pitches is chosen for further development. Slabroad is assessed at ultimate limit state and serviceability by the valid standarts. Calculation of internal forces is made by computer program Scia Engineer 16.0.

The aim of this thesis is to design a bridge over an expressway and a railway. There have been designed three alternatives. For detailed solving was chosen variant transferring directionally divided communication by two identical bridges, formed by a cell box girder. The thesis includes drawings, representation of the construction process, visualisations and a structural analysis. Designing and checks were carried out according to European standarts.

The subject of this thesis is the proposal of main supporting steel structure of multipurpose sports hall with the floor plan dimensions of 36x45 meters. Location of the building is in Znojmo. Total height of the structure is 16 meters. The support structure material is 235 JR. Construction is drafted in three possible options. For the selected option is elaborated project documentation and calculated guide details.

The dissertation introduces the art performance by Miroslav Hornicek. It reflects the collage creation which Miroslav Hornicek devoted more than twenty years. The author introduced the gift of improvisation and humor into his collage. Many of them look like graphic, some of them remind the theater scene. He often repeats the same motive such as eye, sisters, theatrical costumes, sculptures, senses and body organs. It is interesting that despite his work he did not consider himself like the artist. He created many collage, he found inspiration in the creation of Max Ernst, Toyen, Jindrich Styrsky and Jiri Kolar. In relating with Jiri Kolar it is possible to search a certain similarity. From the poet became the artist, collage maker. Miroslav Hornicek was primarily the actor who has also found a way of life in creating collages. Miroslav Hornicek wrote to some of his collages names and interpretations. This material is very important for trying to understand his theater scenes and a tangle of something "incomprehensible", because of collages effect on the viewer. Finally, the dissertation aims to look at his art creation as a whole, highlight the exhibition activity and introduce Miroslav Hornicek not only as the actor, writer, dramatist, director and also the artist with an incredible imagination...

Following old master drawings within the collections of selected Czech collectors Abstract This thesis is a contribution to the history of collecting in Bohemia. It deals with the collecting of drawings and tracks them within the selected collections and collectors. It focuses primarily on the old master drawings, defined as works from the 16th to the 18th century. Within the issue of collecting the attention is, even when studying specific personalities, often paid to the picture galleries rather than the print collections. Due to its fragile nature, drawing tends to fit into the background and, if it does not form the main part of the collection, is not reflected. Many of the collections and collectors have come to attention lately, but many still await their appreciation and introduction into new contexts. Keywords Collecting, collector, drawing, Old Master Drawings, Bohemia, provenance, Prokop Toman, Rudolf Kuchynka, Vincenc Kramář, Jan Krčmář, Frits Lugt

Das Archiv des Technischen Museums Wien verwahrt den umfangreichen Nachlass von Viktor Kaplan (1876-1934). Er gehört zu den bedeutendsten österreichischen Ingenieuren des 20. Jahrhunderts und ist der Erfinder der nach ihm benannten Turbine. Die vor rund 100 Jahren entwickelte Kaplan- Turbine ist bis heute weltweit in Verwendung. Sie hat den Einsatz von Wasserkraft als erneuerbare Energie wesentlich erweitert. Der Nachlass von Viktor Kaplan wurde 2014 in das österreichische Dokumentenregister der UNESCO aufgenommen und zählt damit zu jenen Beständen, die von herausragender Bedeutung für das kulturelle Gedächtnis Österreichs sind. Rund 1.400 technische Zeichnungen aus dem Nachlass des Technikers werden aktuell im Zuge eines mehrjährigen Projekts konservatorisch versorgt und wissenschaftlich bearbeitet. Im Rahmen des Vortrages wird das aufwändige Konservierungsprojekt sowie die wissenschaftliche Erschließung des Bestandes präsentiert. Der Bestand steht für Recherchen im Online-Katalog zur Verfügung unter: https://www.technischesmuseum.at/museum/online- sammlung#sammlung/ui//browseExhibition/14622 / The archive of the Vienna Museum of Technology holds the extensive estate of Viktor Kaplan (1876-1934). He is one of the most important Austrian engineers of the 20th century and the inventor of the turbine named after him. The Kaplan turbine, developed around 100 years ago, is still in use worldwide today. It has significantly expanded the use of hydropower as a renewable energy source. Viktor Kaplan's estate was included in UNESCO's „Memory of Austria“ in 2014, making it one of those holdings that are of outstanding importance to Austria's cultural memory. Around 1,400 technical drawings from the estate of the technician are currently being conserved and scientifically processed in the course of a project lasting several years. The lecture will present the complex conservation project and the scientific indexing of the collection. The collection is available for research in the online catalogue at: https://www.technischesmuseum.at/museum/online- sammlung#sammlung/ui//browseExhibition/14622

Technische Zeichnungen und Pläne dokumentieren die Konstruktion und Entwicklung technischer Gegenstände und Objekte. Sie erläutern Aufbau, Funktion und Zweck von Anlagen, Instrumenten und Maschinen. Sie sind die Sprache des Ingenieurs. Die Plansammlung des Deutschen Museums zählt zu den Kernstücken und ältesten Beständen des Archivs. Ihr Aufbau begann mit der Museumsgründung 1903 als groß angelegtes Unternehmen, das eng mit der Gesamtkonzeption des Deutschen Museums verknüpft war. Heute bietet der Bestand einen umfassenden und einzigartigen Fundus an technikhistorischem Quellenmaterial, das auch künftig gesammelt werden soll. Vor dem Hintergrund der Geschichte und dem heutigen Bestand der Plansammlung werden in dem Vortrag Kriterien für das Sammeln und die Bewertung von technischen Zeichnungen und Plänen im Archiv des Deutschen Museums vorgestellt. / Technical drawings and plans describe the construction and development of technical objects. They explain the structure, function and purpose of plants, instruments and machines. They are the language of the engineer. The plan collection of the Deutsches Museum is one of the most important and oldest holdings of the archive. Its acquisition began with the founding of the museum in 1903 as a large-scale initiative that was closely linked to the general concept of the Deutsches Museum. Today, the holding offers a comprehensive and unique fund of source material on the history of technology, which will continue to be collected in the future. In the context of the history and composition of the plan collection, the presentation discusses criteria for collection and appraisal of technical drawings and plans in the Archives of Deutsches Museum.