Global ETD Search

1	Experimental Investigation of the Mechanical and Creep Rupture Properties of Basalt Fiber Reinforced Polymer (BFRP) Bars Banibayat, Pouya 07 December 2011 (has links) No description available. Civil Engineering Basalt FRP Creep Rupture Seawall effective moment of inertia
2	A Study Of Effective Moment of Inertia Models for Full-Scale Reinforced Concrete T-Beams Subjected to a Tandem-Axle Load Configuration Wickline, Joseph Edward 06 January 2003 (has links) This thesis is a product of the U.S. Army Corp of Engineer's desire to develop a more accurate procedure for estimating the load capacity of an in-service T-beam bridge. A bridge type that is a stumbling block for U.S. Army field engineers due to the unknown amount and placement of the flexural reinforcement in the T-beam girder cross-sections. Personnel from the U.S. Army Corp of Engineer's Waterways Experiment Station in cooperation with personnel from Virginia Tech conceived a procedure that is potentially more accurate, can be quickly executed in the field, and is relatively easy to use by field engineers. In general, the procedure provides a method for transition between the quantity of flexural reinforcement in a reinforced concrete T-beam and the member's actual moment of inertia. Specifically, the goal of this thesis is to evaluate the accuracy of selected, effective moment of inertia models as a component in the proposed analysis procedure. The accuracy of the selected models is evaluated with test data generated from a testing program detailed herein, which load tested full-scale reinforced concrete T-beams. The test specimens were subjected to a closely-spaced, tandem-axle load configuration, a load configuration typical of military equipment. / Master of Science Bridge T-Beam Effective Moment of Inertia Reinforced Concrete
3	Flexural performance of FRP reinforced concrete beams Kara, Ilker F., Ashour, Ashraf 04 1900 (has links) yes / A numerical method for estimating the curvature, deflection and moment capacity of FRP reinforced concrete beams is developed. Force equilibrium and strain compatibility equations for a beam section divided into a number of segments are numerically solved due to the non-linear behaviour of concrete. The deflection is then obtained from the flexural rigidity at mid-span section using the deflection formula for various load cases. A proposed modification to the mid-span flexural rigidity is also introduced to account for the experimentally observed wide cracks over the intermediate support of continuous FRP reinforced concrete beams. Comparisons with experimental results show that the proposed numerical technique can accurately predict moment capacity, curvature and deflection of FRP reinforced concrete beams. The ACI-440.1R-06 equations reasonably predicted the moment capacity of FRP reinforced concrete beams but progressively underestimated the deflection of continuous ones. On the other hand, the proposed modified formula including a correction factor for the beam flexural rigidity reasonably predicted deflections of continuous FRP reinforced concrete beams. It was also shown that a large increase in FRP reinforcement slightly increases the moment capacity of FRP over-reinforced concrete beams but greatly reduces the defection after first cracking.
4	Rehabilitation of Exterior RC Beam-Column Joints using Web-Bonded FRP Sheets Mahini, Seyed Saeid Unknown Date (has links) In a Reinforced Concrete (RC) building subjected to lateral loads such as earthquake and wind pressure, the beam to column joints constitute one of the critical regions, especially the exterior ones, and they must be designed and detailed to dissipate large amounts of energy without a significant loss of, strength, stiffness and ductility. This would be achieved when the beam-column joints are designed in such a way that the plastic hinges form at a distance away from the column face and the joint region remain elastic. In existing frames, an easy and practical way to implement this behaviour following the accepted design philosophy of the strong-column weak-beam concept is the use a Fibre Reinforced Plastic (FRP) retrofitting system. In the case of damaged buildings, this can be achieved through a FRP repairing system. In the experimental part of this study, seven scaled down exterior subassemblies were tested under monotonic or cyclic loads. All specimens were designed following the strong-column weak-beam principal. The three categories selected for this investigation included the FRP-repaired and FRP-retrofitted specimens under monotonic loads and FRP-retrofitted specimen under cyclic loads. All repairing/retrofitting was performed using a new technique called a web-bonded FRP system, which was developed for the first time in the current study. On the basis of test results, it was concluded that the FRP repairing/retrofitting system can restore/upgrade the integrity of the joint, keeping/upgrading its strength, stiffness and ductility, and shifting the plastic hinges from the column face toward the beam in such a way that the joint remains elastic. In the analytical part of this study, a closed-form solution was developed in order to predict the physical behaviour of the repaired/retrofitted specimens. Firstly, an analytical model was developed to calculate the ultimate moment capacity of the web-bonded FRP sections considering two failure modes, FRP rupture and tension failure, followed by an extended formulation for estimating the beam-tip displacement. Based on the analytical model and the extended formulation, failure mechanisms of the test specimens were implemented into a computer program to facilitate the calculations. All seven subassemblies were analysed using this program, and the results were found to be in good agreement with those obtained from experimental study. Design curves were also developed to be used by practicing engineers. In the numerical part of this study, all specimens were analysed by a nonlinear finite element method using ANSYS software. Numerical analysis was performed for three purposes: to calculate the first yield load of the specimens in order to manage the tests; to investigate the ability of the web-bonded FRP system to relocate the plastic hinge from the column face toward the beam; and to calibrate and confirm the results obtained from the experiments. It was concluded that numerical analysis using ANSYS could be considered as a practical tool in the design of the web-bonded FRP beam-column joints. Reinforced concrete Reinforcement Bar strong-column weak-beam principal Exterior Beam-Column Joints Core Small scale modelling Experimental Test set-up Control Plain specimen Rehabilitation Retrofitting retrofitted Repair Repaired Repairing Strengthening Controlling Relocating Plastic hinge Pre-cracking Cracking Crushing Post-cracking Crack Cracked Penetration Damaged Pre-cracked Web-Bonded Wrapping De-bonding Fibre Reinforced Plastic FRP Sheets Composite Confinement Monotonic loads Cyclic loading Loads Displacement control Load control Regime Phase Loading sequence Procedure Available ductility factor Curvature ductility factor Ultimate First yield Flexural yielding Strength Moment Stiffness Failure mechanism Modes Sudden Brittle failure Measured beam-tip displacement Deflection Numerical analysis ANSYS Solid65 Solid45 Link8 Non-linear Finite Element (FE) Convergence criteria Analytical Closed from FRP rupture tension failure Compression failure Minimum thickness Maximum thickness Compressive Tensile Steel Ratio Design charts Effective Moment of Inertia Compatibility Strain Stress

1

Page generated in 0.1115 seconds