The desire to counter multipath effects and improve communication links between mobile wireless systems in dense environment has led to much research in implementing antenna diversity. Space diversity, utilizing two or more antennas separated several wavelengths from one another, is one of the most popular method to achieve this operation. Meanwhile, polarization diversity, utilizing two orthogonal polarizations, has become more attractive in reducing cost and size of antenna systems. Polarization diversity is achieved using two orthogonal feeds to excite the two orthogonal polarization planes of the antenna. The challenge associated with designing dual polarized antennas is the need to reduce isolation between the feed and cross polarization level while maintaining a high efficiency. While a number of studies are successful in realizing polarization diversity, their antenna structure typically present more complex structures involving multiple layers. This thesis presents a novel method to implement polarization diversity on a miniature antenna using a simple planar structure. The antenna structure uses two crossed slots further miniaturized using a method derived from a recent study on miniaturized spiral slot antenna. At an operating frequency of ~ 1 GHz, the antenna is capable of achieving efficiency greater than 90% with a size as small as 0.08 .? x 0.08? The dual polarization operation is achieved by exciting the magnetic currents of the crossed slots with two orthogonal coplanar waveguide feeds. Simulation results of the proposed antenna yield an isolation > 15 dB with cross polarization levels > 10 dB. Theantenna structure was designed using CST Microwave Studio and the simulations were performed using IE3D simulation software.

No description available.

No description available.

This dissertation is focused on the design, fabrication, and characterization of novel metamaterials in microwave and terahertz regions with the following outcomes: A planar &micro / -negative metamaterial structure, called double-sided SRR (DSRR), is proposed in the first part of this study. DSRR combines the features of a conventional split ring resonator (SRR) and a broadside-coupled SRR (BC-SRR) to obtain much better miniaturization at microwave frequencies for a given physical cell size. In addition to DSRR, double-sided multiple SRR (DMSRR), double-sided spiral resonator (DSR), and double-sided U-spiral resonator (DUSR) have been shown to provide smaller electrical sizes than their single-sided versions under magnetic excitation. In the second part of this dissertation, a novel multi-band tunable metamaterial topology, called micro-split SRR (MSSRR), is proposed. In addition to that, a novel magnetic resonator structure named single loop resonator (SLR) is suggested to provide two separate magnetic resonance frequencies in addition to an electric resonance in microwave region. In the third part, two different frequency tunable metamaterial topologies called BC-SRR and gap-to-gap SRR are designed, fabricated and characterized at terahertz frequencies with electrical excitation for the first time. In those designs, frequency tuning based on variations in near field coupling is obtained by in-plane horizontal or vertical displacements of the two SRR layers. The values of frequency shifts obtained for these tunable metamaterial structures are reported to be the highest values obtained in literature so far. Finally, in the last part of this dissertation, novel double-sided metamaterial based sensor topologies are suggested and their feasibility studies are presented.

Pour faire cohabiter les nombreuses technologies radios, les terminaux mobiles nécessitent une miniaturisation de plus en plus poussée des antennes. Toutefois, les performances d'antennes ont des limites fondamentales liées à leurs dimensions physiques. La littérature met en évidence que les réseaux superdirectifs permettent de dépasser la limite de Harrington sur la directivité et que des antennes adaptées par des circuits non-Foster peuvent dépasser la limite de Bode-Fano sur la bande passante. Les contributions essentielles de ce travail de thèse consistent en la conception deréseaux d'antennes superdirectifs et d'antennes adaptées par des circuits non-Foster comme solutions possibles pour l'amélioration des performances des Antennes Electriquement Petites (AEP). Dans une première partie, un convertisseur d'impédance négative est réalisé pour obtenir des condensateurs de valeurs négatives de façon à adapter des antennes miniatures sur une large bande de fréquence. Dans la deuxième partie de ces travaux, les limites théoriques des réseaux d'antennes superdirectifs sont évaluées et une approche simple et pratique permettant la conception de ces réseaux à partir d'éléments parasites est proposée. L'intégration des AEP superdirectives sur des cartes de circuit imprimé est étudiée et les difficultés de mesure de ce type d'antenne sont évaluées. A partir de ces résultats, une nouvelle stratégie pour réaliser des réseaux compactes 3D ou planaires à polarisation linéaire ou circulaire en utilisant des éléments superdirectifs est présentée. / For supporting different wireless technologies, mobile terminals require significant miniaturization of antennas. However, antennas performance has some fundamental limits related to their physical dimensions. The available theory shows that superdirective arrays can exceed Harrington’s limit on antenna directivity and non-Foter matched antennas can surpass Bode-Fano limit on antenna bandwidth. Therefore, this work focuses on the design of superdirective antenna arrays and non-Foster matched antennas as possible solutions for improving the performance of Electrically Small Antennas (ESAs). In the first part: a Negative Impedance Converter (NIC) is designed to have a very small negative capacitor. The circuit is evaluated in terms of gain, stability and linearity. Then, the circuit is used to match several small antennas in the UHF band. In the second part: the theoretical limits of superdirective antenna arrays are studied. A simple and practical approach to design parasitic antenna arrays is proposed. The integration of superdirective ESAs in Printed Circuit Boards (PCBs) is studied and the difficulties of measuring this type of antennasare evaluated. A new strategy for the design of 3D or planar compact arrays, with linear or circular-polarization, using superdirective elements is presented.

This project is focused on computer modeling of so-called meta-materials, and on the exploitation of metamaterials in the design of electrically small antennas. For modeling, COMSOL Multiphysics 3.3 was used. Simulations were focused on impedance matching of antennas. Antennas with metamaterials were compared with corresponding conventional antennas without metamaterial layers. The project does not investigate the creation of metamaterials; the project concentrates on their influence on crucial parameters of antennas. Next step this project is focused on optimalization this structure in program Matlab version R2009b. We used optimalization method PSO (swarms of particles) and results are comparing whit results calculating in COMSOL program.

No description available.

No / A miniaturized conical helix antenna is presented, which displays vertical polarization with electrically small dimensions of 10mm×10mm×45mm. The resonance of the antenna is made tunable by adding a variable digital MEMS capacitor load at the bottom of the helix, giving a tuning range of 316 MHz to 400 MHz. The antenna demonstrates considerable impedance matching bandwidth and gain over the entire tuning frequency band. Most importantly, the antenna is capable of compact, flexible and easy integration into a wireless device package or for platform installation. / Datong of Seven Technology Group, for their support under the KTP project grant No. 008734.

Les antennes présentes dans la plupart des systèmes communicants comme les véhicules automobiles, les avions et les trains se multiplient et sont soumises à une contrainte d’intégration de plus en plus sévère. De nombreuses techniques de miniaturisation d’antennes existent et passent toutes par un compromis entre la taille et les performances (bande passante et/ou rendement de rayonnement). Pour les systèmes cités ci-dessus, les antennes sont souvent placées devant ou à proximité d’un réflecteur métallique (toit de véhicule, carlingue d’aéronef). Dans ce cas, l’épaisseur de système antennaire est une contrainte majeure et les métamatériaux de type Conducteur Magnétique Artificiel (CMA) ouvrent des perspectives intéressantes grâce à leurs propriétés électromagnétiques non conventionnelles. Cependant, pour les applications sub-GHz (RFID, LTE, PMR…), les CMA sont limités par les dimensions des cellules unitaires nécessaires à leur mise en œuvre (λg/4) ainsi que leur bande réduite de fonctionnement. Réduire leurs dimensions permet de rendre leur utilisation compatible avec le contexte des antennes miniatures intégrées. Ajouter l’agilité fréquentielle permet de palier le problème de la bande passante réduite dans le cas des antennes et des CMA miniaturisés en ajustant le fonctionnement du système antennaire sur une large bande passante. Cette thèse de doctorat propose d’étudier et de développer un nouveau système antennaire à faible profil composé d’une antenne miniature associée à une métasurface compacte reconfigurable en fréquence et compatible avec le standard NB-IoT dans la bande basse LTE (700 MHz – 960 MHz). / Antennas are now very integrated in several connected systems like cars, airplanes and trains. Many antenna miniaturization techniques exist and all go through a compromise between size and performance (bandwidth and/or radiation efficiency). For the systems mentioned above, the antennas are often placed near a metallic reflector (vehicle roof, aircraft cabin). Within this context, Artificial Magnetic Conductors (AMC) present an attractive reflector for low profile antennas which can take advantage of intrinsic zero reflection phase response to boost antenna performance without the need for thick quarter wave backplane. However, for sub-GHz applications (RFID, LTE, PMR ...), AMC are limited by the size of the unit cells necessary for their implementation (λg/4) as well as their reduced operating bandwidth. AMC miniaturization makes their use compatible with small antennas. Adding tunability restores the possibility of adjusting the operating frequency over a large bandwidth. This PhD thesis proposes to study and develop a new electrically small, low-profile antenna based on miniaturized and tunable AMC for the NB-IoT standard in low LTE band (700 MHz – 960 MHz).

Artificial magnetic materials (AMMs) are a type of metamaterials which are engineered to exhibit desirable magnetic properties not found in nature. AMMs are realized by embedding electrically small metallic resonators aligned in parallel planes in a host dielectric medium. In the presence of a magnetic field, an electric current is induced on the inclusions leading to the emergence of an enhanced magnetic response inside the medium at the resonance frequency of the inclusions. AMMs with negative permeability are used to develop single negative, or double negative metamaterials. AMMs with enhanced positive permeability are used to provide magneto-dielectric materials at microwave or optical frequencies where the natural magnetic materials fail to work efficiently. Artificial magnetic materials have proliferating applications in microwave and optical frequency region. Such applications include inversely refracting the light beam, invisibility cloaking, ultra miniaturizing and frequency bandwidth enhancing low profile antennas, planar superlensing, super-sensitive sensing, decoupling proximal high profile antennas, and enhancing solar cells efficiency, among others. AMMs have unique enabling features that allow for these important applications. Fundamental limitations on the performance of artificial magnetic materials have been derived. The first limitation which depends on the generic model of permeability functions expresses that the frequency dispersion in an AMM is limited by the desired operational bandwidth. The other constraints are derived based on the geometrical limitations of inclusions. These limitations are calculated based on a circuit model. Therefore, a formulation for permeability and magnetic susceptibility of the media based on a circuit model is developed. The formulation is in terms of a geometrical parameter that represents the geometrical characteristics of the inclusions such as area, perimeter and curvature, and a physical parameter that represents the physical, structural and fabrication characteristics of the medium. The effect of the newly introduced parameters on the effective permeability of the medium and the magnetic loss tangent are studied. In addition, the constraints and relations are used to methodically design artificial magnetic material meeting specific operational requirements. A novel design methodology based on an introduced analytical formulation for artificial magnetic material with desired properties is implemented. The synthesis methodology is performed in an iterative four-step algorithm. In the first step, the feasibility of the design is tested to meet the fundamental constraints. In consecutive steps, the geometrical and physical factors which are attributed to the area and perimeter of the inclusion are synthesized and calculated. An updated range of the inclusion's area and perimeter is obtained through consecutive iterations. Finally, the outcome of the iterative procedure is checked for geometrical realizability. The strategy behind the design methodology is generic and can be applied to any adopted circuit based model for AMMs. Several generic geometries are introduced to realize any combination of geometrically realizable area and perimeter (s,l) pairs. A realizable geometry is referred to a contour that satisfies Dido's inequality. The generic geometries introduced here can be used to fabricate feasible AMMs. The novel generic geometries not only can be used to enhance magnetic properties, but also they can be configured to provide specific permeability with desired dispersion function over a certain frequency bandwidth with a maximum magnetic loss tangent. The proposed generic geometries are parametric contours with uncorrelated perimeter and area function. Geometries are configured by tuning parameters in order to possess specified perimeter and surface area. The produced contour is considered as the inclusion's shape. The inclusions are accordingly termed Rose curve resonators (RCRs), Corrugated rectangular resonators (CRRs) and Sine oval resonators (SORs). Moreover, the detailed characteristics of the RCR are studied. The RCRs are used as complementary resonators in design of the ground plane in a microstrip stop-band filter, and as the substrate in design of a miniaturized patch antenna. The performance of new designs is compared with the counterpart devices, and the advantages are discussed.