Spelling suggestions: "subject:"electrolyte."" "subject:"electrolysis.""
1 |
Conditions for Maximum Operating Efficiency of a Multi-Junction Solar Cell and a Proton Exchange Membrane Electrolyser System for Hydrogen ProductionGies, Warren 14 September 2020 (has links)
Hydrogen is a valuable and versatile energy currency; it may be produced by harvesting solar energy and later used as a fuel to generate electricity any time of the day. This energy transaction of solar energy to hydrogen is evaluated in this work by employing a one-to-one multi-junction solar cell to proton exchange membrane combined system in a laboratory setting. Both components of the system were commercially available. The energy conversion efficiency of each isolated system was first evaluated to determine the ideal operation conditions of each respective system. For input currents in the range of 60 mA to 440 mA, the proton exchange membrane converted electrical energy to chemical potential energy with an efficiency greater than 90%. The multi-junction solar cell reached efficiencies of up to 33% while under a solar concentration of 30 Suns. The current and voltage characteristics, which resulted in the optimal operation of the isolated systems did not align and therefore, both systems were not operating at
their ideal operation conditions when in the combined system. The overall energy conversion efficiency of the system was measured to be at most 19.1% under 25 Suns, an efficiency higher than systems employing traditional silicon solar cells. It was theorized that if the two system were operating under ideal conditions, the overall energy conversion efficiency would be 30.3% between 10 and 15 Suns. Methods to align the ideal operation conditions of the two systems are presented.
|
2 |
Sizing hybrid green hydrogen energy generation and storage systems (HGHES) to enable an increase in renewable penetration for stabilising the gridGazey, Ross Neville January 2014 (has links)
A problem that has become apparently growing in the deployment of renewable energy systems is the power grids inability to accept the forecasted growth in renewable energy generation integration. To support forecasted growth in renewable generation integration, it is now recognised that Energy Storage Technologies (EST) must be utilised. Recent advances in Hydrogen Energy Storage Technologies (HEST) have unlocked their potential for use with constrained renewable generation. HEST combines Hydrogen production, storage and end use technologies with renewable generation in either a directly connected configuration, or indirectly via existing power networks. A levelised cost (LC) model has been developed within this thesis to identify the financial competitiveness of the different HEST application scenarios when used with grid constrained renewable energy. Five HEST scenarios have been investigated to demonstrate the most financially competitive configuration and the benefit that the by-product oxygen from renewable electrolysis can have on financial competitiveness. Furthermore, to address the lack in commercial software tools available to size an energy system incorporating HEST with limited data, a deterministic modelling approach has been developed to enable the initial automatic sizing of a hybrid renewable hydrogen energy system (HRHES) for a specified consumer demand. Within this approach, a worst-case scenario from the financial competitiveness analysis has been used to demonstrate that initial sizing of a HRHES can be achieved with only two input data, namely – the available renewable resource and the load profile. The effect of the electrolyser thermal transients at start-up on the overall quantity of hydrogen produced (and accordingly the energy stored), when operated in conjunction with an intermittent renewable generation source, has also been modelled. Finally, a mass-transfer simulation model has been developed to investigate the suitability of constrained renewable generation in creating hydrogen for a hydrogen refuelling station.
|
3 |
Direct-Coupling of the Photovoltaic Array and PEM Electrolyser in Solar-Hydrogen Systems for Remote Area Power SupplyPaul, Biddyut, s3115524@student.rmit.edu.au January 2009 (has links)
Renewable energy-hydrogen systems for remote area power supply (RAPS) constitute an early niche market for sustainable hydrogen energy. The primary objective of this research has been to investigate the possibility of direct coupling of a PV array to a proton exchange membrane (PEM) electrolyser by appropriate matching of the current-voltage characteristics of both the components. The degree to which optimal matching can be achieved by direct coupling has been studied both theoretically and experimentally. A procedure for matching the maximum power point output of a PV array with the PEM electrolyser load to maximise the energy transfer between them has been presented. The key element of the matching strategy proposed is to vary the series-parallel stacking of individual cells in both the PV array and the PEM electrolyser so that the characteristic current (I) -voltage (V) curves of both the components align as closely as possible. This procedure is applied to a case study of direct coupling a PV array comprising 75 W panels (BP275) to a PEM electrolyser bank assembled from 50 W PEM electrolyser stacks (h-tec StaXX7). It was estimated theoretically that the optimal PV-electrolyser combination would yield an energy transfer of over 94% of the theoretical maximum on annual basis. This combination also gave the lowest hydrogen production cost on a lifecycle basis. An experimental test of this theoretical result for direct coupling was conducted over a period of 728 hours, with an effective direct-coupling operational time of about 467 hours (omitting the hours of zero solar radiation). Close agreement between the theoretically predicted and actual energy transfer from the PV array to the electrolyser bank in this trial was found. The difference between theoretical and experimental hydrogen production was less then 1.2%. The overall solar-to-hydrogen energy conversion efficiency was found to be 7.8%. The electrolysers were characterised before and after the direct coupling experiment, and showed a small decline in Faraday efficiency and energy efficiency. But this decline was less than the uncertainties in the measured values, so that no firm conclusions about electrolyser degradation can be drawn at this stage. Another direct-coupling experiment, using a larger scale PV-electrolyser system, that is, a 2.4 kW PV array at RMIT connected to the 'Oreion Alpha 1' stand-alone 2 kW PEM electrolyser developed by the CSIRO Energy Technology, was also successfully conducted for a period of 1519 hours (with 941 hours of effective operational time of the electrolyser). Energy-efficient direct coupling of a PV array and electrolyser as examined in this thesis promises to improve the economic viability of solar-hydrogen systems for remote power supply since the costs of an electronic coupling system employing a maximum power point tracker (MPPT) and dc-to-dc converter (around US$ 700/ kW) are avoided.
|
4 |
Apport de la pression sur les performances d'une cellule d'électrolyse de la vapeur d'eau à haute température / Contribution of pressure on performances of high temperature steam electrolysis cellCacciuttolo, Quentin 04 December 2014 (has links)
L'électrolyse de l'eau à haute température permet de produire de l'hydrogène et de l'oxygène à partir d'eau, d'électricité et de chaleur grâce à une cellule électrochimique en céramique. Le travail sous pression est étudié afin d'éviter une étape de pressurisation du gaz nécessaire au stockage de celui-ci. Un autoclave fonctionnant jusqu'à 850 °C et 30 bar a été conçu et deux modèles de demi-cellule représentant respectivement l'électrode à hydrogène et l'électrode à oxygène ont été développés pour cette étude.Le modèle a montré que la pression aide l'approvisionnement en vapeur d'eau jusqu'aux sites réactionnels. Les taux de conversion de la vapeur en hydrogène atteignent plus de 95 % à partir de 5 bar.Le modèle du côté oxygène montre un effet thermodynamique négatif de la pression qui est prédit par l'équation de Nernst. Il permet d'étudier les surpressions à l'intérieur de l'électrode et donc le risque de délamination de l'électrode. Le travail sous pression permet de réduire ce risque en diminuant de 96 % les surpressions entre 1 et 30 bar.Le banc a permis d'étudier expérimentalement l'électrode à oxygène grâce à un montage à trois électrodes. Ses performances sont améliorées avec la pression, ce qui permet de compenser l'effet thermodynamique négatif. Les gains de performance s'expliquent par l'effet mécanique de la pression, permettant d'améliorer les contacts au sein de l'électrode mais aussi par une amélioration de la circulation de gaz et une amélioration de la cinétique des réactions d'adsorption/désorption à la surface de l'électrode. / In order to improve the industrial attractiveness of high temperature steam electrolysis (HTSE), the increase in the operating pressure is one of the most promising solutions. In this context, this study is dedicated to the analysis of the pressure influence on the electrochemical reactions occurring in HTSE. A Model and experimental results dealing with the effect of pressure increase have been carried out. Concerning the cathodic side model, the limiting current density due to the lack of steam is shifted towards higher steam conversion rates by increasing the operating pressure. Regarding the anodic side, a negative thermodynamic effect is predicted by Nernst equation but no negative effect appears at high current density. Furthermore, the overpressure at the oxygen electrode decreases with the operating pressure (and so the risk of delamination is reduced). At the same time, experimental studies on three electrodes cell until 30 bars have been lead on the oxygen electrode. A positive effect of the pressure on the oxygen side performances has been observed. This gain in performance could be explained by three different mechanisms. The mechanic effect of pressure increase contact inside the electrode. Furthermore, high pressure improves gas circulation and adsorption/desorption kinetics at the surface of electrode.
|
5 |
Green hydrogen production for fuel cell applications and consumption in SAIAMC research facilityChidziva, Stanford January 2020 (has links)
Philosophiae Doctor - PhD / Today fossil fuels such as oil, coal and natural gas are providing for our ever growing energy needs. As the world’s fossil fuel reserves fast become depleted, it is vital that alternative and cleaner fuels are found. Renewable energy sources are the way of the future energy needs. A solution to the looming energy crisis can be found in the energy carrier hydrogen. Hydrogen can be produced by a number of production technologies. One hydrogen production method explored in this study is electrolysis of water.
|
6 |
Dispatchable operation of multiple electrolysers for demand side response and the production of hydrogen fuel : Libyan case studyRahil, Abdulla January 2018 (has links)
Concerns over both environmental issues and about the depletion of fossil fuels have acted as twin driving forces to the development of renewable energy and its integration into existing electricity grids. The variable nature of RE generators assessment affects the ability to balance supply and demand across electricity networks; however, the use of energy storage and demand-side response techniques is expected to help relieve this situation. One possibility in this regard might be the use of water electrolysis to produce hydrogen while producing industrial-scale DSR services. This would be facilitated by the use of tariff structures that incentive the operation of electrolysers as dispatchable loads. This research has been carried out to answer the following question: What is the feasibility of using electrolysers to provide industrial-scale of Demand-side Response for grid balancing while producing hydrogen at a competitive price? The hydrogen thus produced can then be used, and indeed sold, as a clean automotive fuel. To these ends, two common types of electrolyser, alkaline and PEM, are examined in considerable detail. In particular, two cost scenarios for system components are considered, namely those for 2015 and 2030. The coastal city of Darnah in Libya was chosen as the basis for this case study, where renewable energy can be produced via wind turbines and photovoltaics (PVs), and where there are currently six petrol stations serving the city that can be converted to hydrogen refuelling stations (HRSs). In 2015 all scenarios for both PEM and alkaline electrolysers were considered and were found to be able to partly meet the project aims but with high cost of hydrogen due to the high cost of system capital costs, low price of social carbon cost and less government support. However, by 2030 the price of hydrogen price will make it a good option as energy storage and clean fuel for many reasons such as the expected drop in capital cost, improvement in the efficiency of the equipment, and the expectation of high price of social carbon cost. Penetration of hydrogen into the energy sector requires strong governmental support by either establishing or modifying policies and energy laws to increasingly support renewable energy usage. Government support could effectively bring forward the date at which hydrogen becomes techno-economically viable (i.e. sooner than 2030).
|
7 |
Gatubelysning i bebyggelse utan fast elnät i Ghana : Kan en anläggning för gatubelysning drivas av solceller med bränsleceller som ackumulator, i ett slutet system? / Off grid Street Lighting in Ghana : Could a Facility for Street Lights be powered by Solar Cells with Fuel Cell as an accumulator, in a closed system?Mårtensson, Pär January 2013 (has links)
Abstract There are rural areas in Ghana which are off-grid but where there is a need for street lighting. Street lighting facilities in such areas typically store electrical power in lead-acid batteries. The goal of this thesis is to construct a facility where fuel cells and hydrogen accumulation replace lead-acid batteries. The construction consists of a solar cell which transmits DC power to an electrolyzer which in turn produces hydrogen and oxygen. The gases accumulate in the container until nightfall when it starts providing DC power to street lighting via a fuel cell. The street lights can operate between 5 - 10 hours per day, depending on the power of the lamp. Besides providing street lighting the device may also be used for other purposes such as indoor lighting, charging of mobile phones etc. This means that, in addition to the basic purpose of providing electrical power to the street lights, other co-benefits of social significance can be achieved. The device is designed not to create any harmful emissions during operation, thus being environmentally sustainable. Further research on the device may in a second step entail: Construction of a prototype on a smaller scale, where calculations and function are tested. If it turns out well, a third step can begin: To build a full scale plant to be tested on site in Ghana.
|
8 |
Modelling and Techno-economic Analysis of a Hybrid CSP/PV System using Solid Oxide Electrolyser for Hydrogen ProductionTang, Chuanyin January 2023 (has links)
This project proposes a solar-driven hybrid system for electricity generation and hydrogen production, which includes concentrated solar power (CSP), photovoltaic (PV), solid oxide electrolyser (SOEC). Electricity from the CSP and PV provides a continuous 24/7 supply to meet demand-side power consumption. When demand-side power consumption is low, the excess power is used to electrolyse water in the SOEC system. In this study, an SOEC is modelled, operation strategy for the solar-driven hybrid system is developed, the techno-economic performance of the overall system is evaluated, and sensitivity analysis is performed. For the modelling part, first develop an SOEC component in Matlab and Trnsys by considering the electrochemical model, thermal model and electric model. Second, design the hybrid system layout and simulate the system under 8760 hours in Matlab and Trnsys. The hybrid system is divided into five blocks: Heat Energy Source Block, Thermal Energy Storage Block, Rankine Cycle Block, Photovoltaic Block, Power to Hydrogen (PtH) Block. The operation strategy is: the heat is collected using a tower solar receiver and stored in tanks by heat transfer fluid molten salt. These thermal energy heats the water in heat exchangers and the resulting high temperature water vapour is used in steam turbine to generate electricity; at the same time part of the heat transfer fluid heats the feedwater in the PtH block and the resulting high temperature water vapour is used in SOEC for hydrogen production, if the operation temperature of steam in SOEC is not reached after heat exchange, the electric heater will heat the steam to raise the temperature. The CSP and PV provide electricity to demand side and SOEC. The produced hydrogen will be transported by truck or ship after compressed. For results part, the minimum CSP configurations to provide a 24/7 demand-side electricity consumption is a solar multiple (SM) with 2 and thermal storage (TES) size of 14 hours. SOEC stack has the best techno-economic performance at a nominal power of 275 Watt. The hybrid system has a levelised cost of electricity (LCOE) at 0.219 USD/kWh and a levelised cost of hydrogen (LCOH) at 7.5 USD/Kg. There are several sensitivity parameters for increase the energy productivity and decrease levelised cost. The larger the SM, the better the ability to generate power. The larger the TES size, the more the hourly generation is similar, otherwise it will fluctuate more. Increasing the SM results in a higher LCOE and a significantly lower LCOH. Increasing TES size also increases the LCOE, whereas the TES size has a marginal impact on the decrease of LCOH. Increased installed capacity inevitably leads to increased power generation. The increasing total power capacity makes the surplus power at the same demand side increase, so the SOEC runs at higher input power and the total hydrogen production increases, resulting in a lower LCOH. The effect of SOEC capacity on LCOH depends on the relationship between input power and SOEC nominal power. Higher operation temperature of SOEC leads to the lower the reversible voltage and an increasing consumption for water vapour. However, when the water vapour concentration is too high, the electrolysis current will instead drop, meaning that the rate of hydrogen production will drop.
|
9 |
Oxygen Evolution Reaction with Hierarchically Porous NiFe2O4 in Anion Exchange Membrane Water Electrolysis / Syreutvecklingsreaktion med hierarkiskt porös NiFe2O4 i vattenelektrolys med anjonbytesmembranThögersen, Jesper January 2023 (has links)
No description available.
|
10 |
Improved system models for building-integrated hybrid renewable energy systems with advanced storage : a combined experimental and simulation approachBaumann, Lars January 2015 (has links)
The domestic sector will play an important role in the decarbonisation and decentralisation of the energy sector in the future. Installation numbers of building-integrated small-scale energy systems such as photovoltaics (PV), wind turbines and micro-combined heat and power (CHP) have significantly increased. However, the power output of PV and wind turbines is inherently linked to weather conditions; thus, the injected power into the public grid can be highly intermittent. With the increasing share of renewable energy at all voltage levels challenges arise in terms of power stability and quality. To overcome the volatility of such energy sources, storage technologies can be applied to temporarily decouple power generation from power consumption. Two emerging storage technologies which can be applied at residential level are hydrogen systems and vanadium-redox-flow-batteries (VRFB). In addition, the building-integrated energy sources and storage system can be combined to form a hybrid renewable energy system (HRES) to manage the energy flow more efficiently. The main focus of this thesis is to investigate the dynamic performance of two emerging energy storage technologies, a hydrogen loop composed of alkaline electrolyser, gas storage and proton exchange membrane (PEM) fuel cell, and a VRFB. In addition, the application of building-integrated HRES at customer level to increase the self-consumption of the onsite generated electricity and to lower the grid interaction of the building has been analysed. The first part deals with the development of a research test-bed known as the Hybrid Renewable Energy Park (HREP). The HREP is a residential-scale distributed energy system that comprises photovoltaic, wind turbine, CHP, lead acid batteries, PEM fuel cell, alkaline electrolyser and VRFB. In addition, it is equipped with programmable electronic loads to emulate different energy consumption patterns and a charging point for electric vehicles. Because of its modular structure different combinations of energy systems can be investigated and it can be easily extended. A unified communication channel based on the local operating network (LON) has been established to coordinate and control the HREP. Information from the energy systems is gathered with a temporal resolution of one second. Integration issues encountered during the integration process have been addressed. The second part presents an experimental methodology to assess the steady state and dynamic performance of the electrolyser, the fuel cell and the VRFB. Operational constrains such as minimum input/output power or start-up times were extracted from the experiments. The response of the energy systems to single and multiple dynamic events was analysed, too. The results show that there are temporal limits for each energy system, which affect its response to a sudden load change or the ability to follow a load profile. Obstacles arise in terms of temporal delays mainly caused by the distributed communication system and should be considered when operating or simulating a HRES at system level. The third part shows how improved system models of each component can be developed using the findings from the experiments. System models presented in the literature have the shortcoming that operational aspects are not adequately addressed. For example, it is commonly assumed that energy systems at system level can respond to load variations almost instantaneously. Thus, component models were developed in an integrated manner to combine theoretical and operational aspects. A generic model layout was defined containing several subsystems, which enables an easy implementation into an overall simulation model in MATLAB®/Simulink®. Experimental methods were explained to extract the new parameters of the semi-empirical models and discrete operational aspects were modelled using Stateflow®, a graphical tool to formulate statechart diagrams. All system models were validated using measured data from the experimental analysis. The results show a low mean-absolute-percentage-error (<3%). Furthermore, an advanced energy management strategy has been developed to coordinate and to control the energy systems by combining three mechanisms; statechart diagrams, double exponential smoothing and frequency decoupling. The last part deals with the evaluation, operation and control of HRES in the light of the improved system models and the energy management strategy. Various simulated case studies were defined to assess a building-integrated HRES on an annual basis. Results show that the overall performance of the hydrogen loop can be improved by limiting the operational window and by reducing the dynamic operation. The capability to capture the waste heat from the electrolyser to supply hot water to the residence as a means of increasing the overall system efficiency was also determined. Finally, the energy management strategy was demonstrated by real-time experiments with the HREP and the dynamic performance of the combined operation has been evaluated. The presented results of the detailed experimental study to characterise the hydrogen loop and the VRFB as well as the developed system models revealed valuable information about their dynamic operation at system level. These findings have relevance to the future application and for simulation studies of building-integrated HRES. There are still integration aspects which need to be addressed in the future to overcome the proprietary problem of the control systems. The innovations in the HREP provide an advanced platform for future investigations such as electric-vehicles as decentralised mobile storage and the development of more advanced control approaches.
|
Page generated in 0.0409 seconds