The diploma thesis deals with the design of nearly zero energy buildings. It focuses primarily on optimizing the thermal insulation thickness at a cost-optimal level. Based on energy consumption analysis, three heat sources are selected and then evaluated using an energy assessment. The building is evaluated in terms of energy, economic and environmental.

The aim of the diploma thesis is to evaluate the energy assessment and elaboration of energy performance certificates of the building. The building is an apartment building in Vítkov. The theoretical part deals with centralized heat supply. The calculation part contains a more detailed description of individual relationships and calculation procedures that are used to process energy performance certificates of the building. Furthermore, proposals for measures to improve the energy performance of buildings. In this part there is also a proposal of individual equipment of the new boiler room and thermographic measurement. In the project part there is an energy assessment assessing the building in two variants with individual heat sources. The evaluation is carried out from an energy, economic and environmental aspect.

The master thesis is focused on rating of buildings with almost zero energy consumption. Theoretical part summarizes general requirements on buildings with almost zero energy consumption. It also discusses other categories of buildings on terms of energy demand and influences and factors affecting the energy performance of buildings. The calculating part comparing three different construction systems of designed family house by means of energy demand with energy assessment and energy performance certificate of buildings.

The main objective of the master’s thesis is elaboration of energy audit within the theme of energy rating of buildings. Work consists of the beginning to the given theme including the actual legislative regulations. Another part is elaboration of the energy audit of building municipality with design and rating the measures of reduction of energy consumptions. In experimental part work deals with evaluation of building thermal envelope with use of thermograph measurement, also with quality of indoor environment within the use of building by measurement of concentration of CO2 and with heat and humidity balance.

Contain of master´s thesis is a energy assessment of multifunctional building in Komňátka. The theoretical part deals with the analysis of legislativ documents, current technical solution and practical application to the specified building. In the practical part thesis focus on experimental determination of the heat transfer coefficient using thermography.

The aim of the thesis is a design of the best energy measures for a family house. At first there is carried out an energy assessment of the building. According to results of that survey there are drawn up some variants of measures. Furthermore, based on energy assessment results there is elaborated a project for reconstruction of the heating.

The thesis contains a gas boiler room energy assessment in Lišov. In the mentioned boiler room, there are instaled gas condensing boilers and cogeneration units Theoretical part of the thesis lists a summary of generally used cogeneration equipment and ordinarily used gases. Calculation part includes four variants of the boiler room reconstruction. Energy assessment compares the chosen variant from the calculation part with the original condition of the boiler room.

The first part of the final thesis is focused on the use of thermovision for diagnosing defects and failures in building industry. Documented history, physical principles and conditions for the measuring of thermographic camera are described in this part. Thermal images of the object described below were used for demonstrating the defects. The second part is dedicated to the elaborated energy assessment for a nine-storey slab block building. In total, there are five energy economic measures developed for the building. Three of those are of structural character and two of those are for building equipment. There are two variants designed based on the measures, one of which is recommended and evalu-ated. The final section is focused on the measurement of slab block building indoor environment (CO2, air temperature, relative humidity, dew point) and its assessment in concern with the current legislation.

Diplomová práce se zabývá energetickým sektorem v Ruské Federaci se zaměřením na sektor budov a jejich energetickou efektivnost. Je zde vytvořen základní přehled předpi-sů a norem týkajících se sektoru budov a dotační programy vytvořené Ruskou vládou na snížení energetické náročnosti. V praktické části je provedeno energetické hodnocení dané budovy v podmínkách Čr a Ruské Federace. Výpočty energetických bilancí budovy jsou prováděny pro klimatické podmínky daných zemí a v souladu s národními předpisy. Na základě energetických bilancí jsou navrženy opatření na úsporu energie. V závěru je provedeno ekonomické posouzení, s ohledem na rozdílné ceny energií a nákladů na provedení návrhových opat-ření v České republice a Ruské Federaci.

Purpose: The purpose with this project was to evaluate the environmental, social, and economic aspects regarding two climate positive buildings in Västerås municipality in Sweden. The company responsible for the buildings, ETC Bygg AB, has assigned this task tothe research group Future Energy Center (FEC) at Mälardalen University. Method: The buildings was simulated with the programs IDA ICE and PVGIS to obtain the overall energy consumption and building efficiency as well as the PV system potential. Regarding transportation, vehicle and driver statistics was studied and adapted to the case study to estimate the tenant’s climate impact. Results: The results showed that the electricity obtained from the PV system both covers the building’s, and tenant’s estimated yearly electricity consumption, but also with a surplus available for storage or selling. The simulatedresults were compared to several previous studies with similar outcome, but with slightly different results. The tenants need for climate friendly transportation resulted in a suggestion of an electric mobility station consisting of electric cars, mopeds, and bicycles to lower the tenants carbon mitigation, costs, and energy consumption. Conclusions: Conclusions from the study was that the buildings meet both the BBR, and the FEBY18 Gold requirements with their high energy efficiency, as well as that the solar power system most likely will produce enough energy to cover both building, and tenant power consumption. A conclusion can be made that the transition to electric transportation have a potential to save both a considerable amount of energy and money for the tenants, but also the possibility to lower their collective yearly carbon mitigation. Also, that the life in a climate positive building have mostly, if not only, positive impacts on its residents.