Spelling suggestions: "subject:"entertainment.""
31 |
Ionotropic receptors (IRs) contribute to temperature synchronization in Drosophila melanogasterChen, Chenghao January 2014 (has links)
Like most organisms, Drosophila melanogaster can synchronize its physiological and behavioural processes by possessing internal circadian clock that regulates. Naturally fluctuating timing cues, like light and temperature (also known as Zeitgebers), synchronize these endogenous and self‐sustained clocks with external time. In Drosophila, synchronization of the circadian clock by light has been studied in detail, but much less is known about the molecular mechanisms underlying temperature entrainment. Previous data from our lab shows that Nocte, a Chordotonal organ (Ch organ) located protein, is required for normal temperature entrainment in Drosophila. However, neither the function of Nocte in temperature entrainment nor the molecular underlying mechanisms are clear. To address these issues, a proteomics strategy of combing co‐immunoprecipitation and MS/MS sequencing was applied to isolate potential interactors of Nocte. IR25a was one of the most promising candidates, which was later confirmed by behavioural tests using RNA interference: Reducing IR25a expression in Chorgan resulted in abnormal behaviour during temperature cycles, similar to what had been described for Nocte mutant. To further confirm the interaction between Nocte and IR25a, I showed that IR25a physically interacts with Nocte in vivo. Moreover, using an IR25a‐gal4 line, I was able to show that IR25a is expressed in subsets of chordotonal organs (Ch organ) including Johnston's Organs (JO), where Nocte is also highly expressed. These results, along with the behavioural data mentioned above are consistent with the proteomics results and suggest that Nocte and IR25a physically and functionally interact. IR25a mutants were employed to further investigate the function of IR25a in temperature entrainment. First of all, I found that both central and peripheral clocks in wild type flies can be synchronized to temperature cycles with only two degree differences (12h: 12h, 27 °C: 25 °C). In contrast, synchronization of locomotor activity rhythms in the IR25a null mutants to the same temperature cycles and other TC's with 2°C amplitude was eliminated. Under the same conditions, the oscillations of the core clock proteins TIMLESS (TIM) and PERIOD (PER) that normally occur in fly heads were completely abolished inIR25a null mutants, suggesting that IR25a is required for temperature entrainment of peripheral clocks. In the central brain pacemaker neurons, the oscillations of TIM in dorsal and lateral neurons were also affected by the IR25a mutants. On the contrary, IR25a is not required for light entrainment and temperature compensation, suggesting that IR25a is specifically involved in temperature synchronization. Moreover, temperature entrainment of the IR25a null mutants can be partially restored by applying larger temperature intervals (29°C: 25°C) indicating that IR25amay function as amplitude detector independent of absolute temperature values. Finally, neuronal activity in IR25a+ neurons is crucial for the synchronization of circadian clocks to low amplitude temperature cycles. Re‐constitution of functional olfactory receptors required the assembly of IR25a with IR76a and IR76b. Interestingly, IR76a and IR76b are neither required for temperature entrainment at the behavioural level nor expressed in the Ch organs. To check if other potential IRs interacting with IR25a exist, I screened the expression pattern of most divergent IRs using IR‐gal4/UAS‐GFP flies. IR56a was isolated as a potential partner of IR25a because it is also expressed in the femur chordotonal organs. To investigate the function of IR56a in temperature entrainment, I generated a null mutant of IR56a. Surprisingly, this gene is not required for synchronizing clocks to a temperature cycle (27°C: 25°C) at the behavioural level. However, the behavioural and molecular phenotypes of IR56a mutant under different temperature cycles need to be further characterized.
|
32 |
A study of entrainment in two-phase upward cocurrent annular flow in a vertical tubeHan, Huawei 01 June 2005
<p>The main purpose of this research is to investigate liquid entrainment mechanisms of annular flow by computational fluid dynamics (CFD) techniques. A numerical model is developed. The model is based on the physics of an upward annular flow. In the modeling, a transient renormalization group (RNG) k-å model in conjunction with enhanced wall treatment method was employed. In order to reconstruct the two-phase interface, the geometric reconstruction scheme of volume of fluid (VOF) model was adopted. Fluent® 6.18 was used as the solution tool. Simulation results indicated that disturbance waves were generated first on the two-phase interface and their evolution eventually resulted in the liquid entrainment phenomena. The most significant accomplishment of this work is that details of the entrainment mechanisms are well described by the numerical simulation work. In addition, two new entrainment mechanisms are presented. One entrainment mechanism demonstrates that the evolution of individual waves causes the onset of liquid entrainment; the other mechanism shows that the coalescence of two adjacent waves (during the course of their evolution) plays an important role in the progression of liquid entrainment. The newly developed entrainment mechanisms are based on conservation laws.
In order to explore the flow physics of the targeted annular flow, the law of the wall, in conjunction with an analytical model based on a force balance, was applied to previously collected experimental data. Results indicated that the film flow had strong features of near-wall flow. In addition, based on prior experimental work and a newly developed physical wave model by researchers in the Microgravity Research Group, University of Saskatchewan, a steady RNG k-å model, in conjunction with the enhanced wall treatment method, was applied to the gas core. The simulation results showed turbulent flow features in the gas core and strong effects of the interfacial waves on the simulation results. The above information forms the physical foundation for the simulation work on the entrainment mechanism.</p><p>One significant contribution to the authors research group is the liquid entrainment fraction data. A new method was introduced to make the measurements. The method combined a chemically-based titration method with a newly-designed instrument, a separator, to effectively measure the entrainment fraction. Experiments were conducted at low system pressure (~ 1 atm) and relatively low gas and liquid superficial velocities (Vsg = 25.8 m/s to 45.5 m/s, and Vsl = 0.15 m/s to 0.30 m/s, respectively). The entrainment fraction was found to be under 7 %, with a maximum uncertainty of 0.26 % for all the experimental set points. Repeatability test results and comparisons with previous entrainment data indicated that the new technique can perform as well as other measurement techniques.</p>
|
33 |
A study of entrainment in two-phase upward cocurrent annular flow in a vertical tubeHan, Huawei 01 June 2005 (has links)
<p>The main purpose of this research is to investigate liquid entrainment mechanisms of annular flow by computational fluid dynamics (CFD) techniques. A numerical model is developed. The model is based on the physics of an upward annular flow. In the modeling, a transient renormalization group (RNG) k-å model in conjunction with enhanced wall treatment method was employed. In order to reconstruct the two-phase interface, the geometric reconstruction scheme of volume of fluid (VOF) model was adopted. Fluent® 6.18 was used as the solution tool. Simulation results indicated that disturbance waves were generated first on the two-phase interface and their evolution eventually resulted in the liquid entrainment phenomena. The most significant accomplishment of this work is that details of the entrainment mechanisms are well described by the numerical simulation work. In addition, two new entrainment mechanisms are presented. One entrainment mechanism demonstrates that the evolution of individual waves causes the onset of liquid entrainment; the other mechanism shows that the coalescence of two adjacent waves (during the course of their evolution) plays an important role in the progression of liquid entrainment. The newly developed entrainment mechanisms are based on conservation laws.
In order to explore the flow physics of the targeted annular flow, the law of the wall, in conjunction with an analytical model based on a force balance, was applied to previously collected experimental data. Results indicated that the film flow had strong features of near-wall flow. In addition, based on prior experimental work and a newly developed physical wave model by researchers in the Microgravity Research Group, University of Saskatchewan, a steady RNG k-å model, in conjunction with the enhanced wall treatment method, was applied to the gas core. The simulation results showed turbulent flow features in the gas core and strong effects of the interfacial waves on the simulation results. The above information forms the physical foundation for the simulation work on the entrainment mechanism.</p><p>One significant contribution to the authors research group is the liquid entrainment fraction data. A new method was introduced to make the measurements. The method combined a chemically-based titration method with a newly-designed instrument, a separator, to effectively measure the entrainment fraction. Experiments were conducted at low system pressure (~ 1 atm) and relatively low gas and liquid superficial velocities (Vsg = 25.8 m/s to 45.5 m/s, and Vsl = 0.15 m/s to 0.30 m/s, respectively). The entrainment fraction was found to be under 7 %, with a maximum uncertainty of 0.26 % for all the experimental set points. Repeatability test results and comparisons with previous entrainment data indicated that the new technique can perform as well as other measurement techniques.</p>
|
34 |
Characterization of air voids in fresh cement paste through ultrasonic nondestructive testingKmack, Richard Matthew 10 July 2008 (has links)
The objective of this research is the pursuit of a better characterization method for the air voids - particularly air-entrained voids - in fresh cement-based materials through the use of ultrasonics. The use of air-entraining agents (AEA's) to incorporate a stable network of air voids into fresh cement paste is common practice in the concrete industry. These particular air voids significantly improve durability of hardened cement paste through mitigation of stresses associated with freezing and thawing cycles. It is understood that the performance of entrained air voids in cement paste is dependent on their size and distribution, or spacing factor. However, conventional methods for qualifying air content, such as the Pressure, Volume, and Gravimetric Methods, only measure total air volume and cannot assess size or spacing. In this investigation, using matched pairs of transducers, ultrasonic pulses were transmitted through fresh cement paste specimens (0.0\% up to 0.6\% AEA by weight of cement). The received signals were recorded every five minutes during the first six hours and then every fifteen minutes thereafter. Analysis shows strong distinctions between specimens with and those without the AEA. Further research is needed into the distinctions among specimens with the AEA. However, the data suggest correlations between Vicat setting times, heat of hydration, and autogenous strain and ultrasonic metrics such as pulse velocity and peak frequency of the signal. The findings of this research should be most appropriate as a foundation for an inversion process and improved air-entrainment detection methods.
|
35 |
On the small-scale dynamics of cloud edgesDitas, Jeannine 19 May 2014 (has links)
Clouds are one of the major uncertainties in climate change predictions caused by their complex structure and dynamics. Numerous cloud processes are acting from cloud-scale down to mm-scale and interplay with each other as well as with atmospheric processes. This complexity on the one hand and the high spatial resolution required to analyse the small scale processes on the other hand cause difficulties in cloud research. One important and until now insufficiently understood process in cloud microphysics is the entrainment process. It defines the turbulent transport of sub-saturated environmental air into the cloud region. Subsequent mixing leads to the evaporation of cloud droplets resulting in negatively buoyant air at cloud edge. One distinguishes between two types of entrainment processes: cloud top and lateral entrainment. While the first type is mostly detected at the top of stratiform clouds, lateral entrainment plays an important role for the dynamics of cumulus clouds.
Within in this thesis, highly-resolved measurements with a resolution down to the centimeter scale performed with the helicopter-borne measurement payload ACTOS (Airborne Cloud Turbulence Observation System) are used to study both types of entrainment processes. Shear-induced cloud top entrainment leads to a turbulent inversion layer (TIL) atop of a stratocumulus layer consisting of clear air. The TIL seems to be coupled with the underlying cloud layer due to the turbulence intensity. With increasing thickness of the TIL the turbulence inside is damped monotonically leading to a maximum layer thickness and inhibiting direct mixing between cloud top and free troposphere. At the edges of shallow trade wind cumuli, shear-induced lateral entrainment generates a subsiding shell. Its evolution is analysed based on detailed measurements in continuously developing shallow cumuli. With the cloud evolution, the subsiding shell grows at the expense of the cloud core region and an increasing downdraft velocity is observed within this region. These observations are confirmed with the simulation of an idealised subsiding shell.
The results present unique observations at the edges of clouds and are an appreciable progress in cloud research which decisively influence future research.
|
36 |
The influence of gas and liquid physical properties on entrainment inside a sieve tray columnUys, Ehbenezer Chris 12 1900 (has links)
Thesis (PhD)--Stellenbosch University, 2012. / ENGLISH ABSTRACT: Distillation column design and operation require understanding of both the hydrodynamic
and thermodynamic behaviour and limitations. One of the hydrodynamic aspects that
negatively influence separation efficiency in the distillation column is entrainment of the
liquid with the rising vapour or gas. Inaccurate entrainment predictions will lead to poor
separation efficiencies in the column and consequently over design of the column diameter
and/or height has to be incorporated. This has a significant impact on the capital cost due to
the size and scale of industrial columns. Therefore, small improvements in entrainment
prediction will lead to large savings in capital investment.
Previous research published in the open literature focused primarily on the influence of gas
and liquid flow rates and, tray geometry on entrainment for the air/water system.
Consequently the non-air/water database is small and consists of data obtained from
various tray and column geometries. As a result the accuracy of current entrainment
prediction models is questionable for systems other than air/water. Therefore, the first
objective of this work was to investigate whether current prediction models perform well
for systems other than air/water. To prove this air/water, air/ethylene glycol and air/silicon
oil data were measured and compared with current prediction correlations. It was found
that current prediction models perform poorly for the air/ethylene glycol and air/silicone oil
systems. At the same time a new observation was made with regard to froth development
and behaviour inside the column. The observation shows that liquid flow rate has a nonmonotonic
influence on entrainment, caused by the short (475mm) tray flow path.
The second objective was to examine the influence of gas physical properties on
entrainment. New entrainment data were measured by individually contacting air, CO2 and
SF6 with water and ethylene glycol, while n-butanol was contacted with CO2 and SF6. The
data was compared with current prediction models which performed poorly for SF6 results.
This shows the inability of these models to predict entrainment for gas systems with high
densities. Modified Reynolds and Froude numbers were developed to show the influence of
gas physical properties on entrainment. Low modified Reynolds numbers and large modified
Froude numbers resulted in high entrainment.
The third objective was to determine the influence of liquid physical properties on
entrainment. New entrainment data were measured using CO2 with Isopar G, n-butanol,
water, silicone oil and ethylene glycol. Current prediction models compared poorly to the
data and did not include the influence of liquid viscosity on entrainment. It was found that
viscosity had an intricate non-monotonic influence on entrainment.
The fourth and final objective was to correlate the influence of gas and liquid properties on
entrainment as determined by the previous two objectives. To make the dataset more
complete, entrainment was measured for four tray spacings using CO2/Isopar, CO2/nbutanol,
air/ethylene glycol, CO2/ethylene glycol, air/silicone oil and CO2/silicone oil (over
1700 data points). Two new correlations are presented to predict the fraction of liquid
entraining with the rising gas (L’/G with R2 = 85%) and the fraction of liquid entering the tray
that entrains (L’/L with R2 = 92%). The performance of the L’/G correlation (R2 = 85%) is
vastly superior to two other prominent correlations (R2 = 61% and 23%). This correlation can
be implemented to predict entrainment successfully for different tray geometries by
combining the predicted influence of tray geometry, by Kister and Haas (1988), with results
from the newly developed correlation. All four objectives are presented as manuscripts for
journal publication and serve as alone standing documents. / AFRIKAANSE OPSOMMING: Distillasie kolom ontwerp en bedryf vereis begrip van beide die hidrodinamiese en
termodinamiese gedrag en beperkings. Een van die hidrodinamiese aspekte wat skeiding
doeltreffendheid negatief beïnvloed in die distillasie kolom is meesleuring van die vloeistof
met die stygende dampe of gas. Onakkurate meesleuring voorspellings sal lei tot swak
skeiding doeltreffendheid in die kolom en gevolglik word die ontwerp van die kolom
deursnee en / of hoogte beinvloed. Dit het 'n beduidende impak op die kapitale koste as
gevolg van die grootte en skaal van industriële kolomme. Klein verbeterings in meesleuring
voorspelling sal dus lei tot groot besparings in kapitaal belegging.
Vorige navorsing gepubliseer in die oop literatuur het hoofsaaklik gefokus op die invloed van
gas- en vloeistof vloeitempos en plaat geometrie op meesleuring vir die lug/water sisteem.
Gevolglik is die nie-lug/water databasis klein en bestaan van die data wat verkry is uit
verskeie plaat en kolom-geometrieë. As gevolg is die akkuraatheid van die huidige
meesleuring voorspelling modelle vir stelsels anders as lug/water te betwyfel. Daarom is die
eerste doel van hierdie werk om ondersoek in te stel of die huidige voorspelling modelle
goed presteer vir stelsels anders as lug/water. Om dit te bewys was lug/water,
lug/etileenglikol en lug/silikon olie data gemeet en vergelyk met die huidige voorspelling
korrelasies. Daar is bevind dat die huidige voorspellings modelle swak presteer vir die
lug/etileenglikol en lug/silikon olie. Op dieselfde tyd was 'n nuwe waarneming gemaak met
betrekking tot dispersie ontwikkeling en gedrag binne die kolom. Die waarneming toon dat
vloeistof vloeitempo 'n nie-monotoniese invloed op meesleuring het, veroorsaak deur die
kort (475mm) plaat vloei pad lengte.
Die tweede doelwit was om die invloed van gas fisiese eienskappe op meesleuring te
ondersoek. Nuwe meesleuring data was gemeet deur individuele kontak van lug, CO2 en SF6
met water en etileenglikol, terwyl n-butanol slegs met CO2 en SF6 inkontak gebring was. Die
eksperimentele resultate word vergelyk met die huidige voorspellings modelle wat swak
presteer invergelyking met SF6 resultate. Dit toon die onvermoë van hierdie modelle om
meesleuring vir gas stelsels met hoë digthede te voorspel. Gemodifiseerde Reynolds en
Froude getalle was ontwikkel om die invloed van gas fisiese eienskappe op meesleuring aan
te toon. Lae gemodifiseerde Reynolds getalle en groot gemodifiseerde Froude getalle lei na
hoë meesleuring.
Die derde doelwit was om die invloed van vloeistof fisiese eienskappe op meesleuring te
bepaal. Nuwe meesleuring data is gemeet deur gebruik te maak van CO2 met Isopar G, nbutanol,
water, silikon olie en etileenglikol. Huidige voorspellings modelle vergelyk swak
met die data en sluit nie die invloed van vloeistof viskositeit op meesleuring in nie. Daar is
gevind dat viskositeit 'n ingewikkelde nie-monotoniese invloed op meesleuring het.
Die vierde en finale doelwit was om die invloed van die gas en vloeistof eienskappe op
meesleuring soos bepaal deur die vorige twee doelwitte te korreleer. Om die datastel meer
volledig te maak, is meesleuring vir vier plaat spasiërings met CO2/Isopar, CO2/n-butanol,
lug/etileenglikol, CO2/ethylene glycol, lug/silikon olie en CO2/silikon olie (meer as 1700 data
punte gemeet). Twee nuwe korrelasies word aangebied om die fraksie vloeistof wat
meegesleur word met die stygende gas (L’/G met R2 = 85%) en die fraksie vloeistof wat die
plaat binnetree wat meegesleur word (L’/L met R2 = 92%) te voorspel. Die prestasie van die
L’/G korrelasie (R2 = 85%) is aansienlik beter as twee ander prominente korrelasies (R2 = 61%
en 23%). Hierdie korrelasie kan suksesvol geïmplementeer word om meesleuring vir
verskillende plaat geometrieë te voorspel deur die voorspelde invloed van plaat geometrie
deur Kister en Haas (1988), met die resultate van die nuut ontwikkelde korrelasie te
kombineer. Al vier doelwitte word as manuskripte vir joernaal publikasie aangebied en dien
as alleenstaande dokumente.
|
37 |
Hydrodynamic evaluation of the effects of fluid physical properties and sieve tray geometry on entrainment and weepingMoses, Royston Kyle 12 1900 (has links)
Thesis (MEng) -- Stellenbosch University, 2014. / ENGLISH ABSTRACT: Distillation is one of the most widely used processes for the separation of fluids with different
volatilities. Due to the popularity of this process it is often assumed that the hydrodynamic
behaviour inside distillation columns is well-defined. However, this is not always the case and this
study therefore endeavoured to provide additional insight into the topic through a systematic
investigation into the hydrodynamics and the capacity limitations of a sieve tray distillation column.
The objective of the study was to measure and evaluate the effects of the following variables on
entrainment and weeping:
- Fluid flow rate (gas and liquid).
- Plate geometry (i.e. hole diameter and fractional hole area).
- Liquid properties (i.e. surface tension, viscosity and density).
- Gas properties (i.e. viscosity and density). The hydrodynamic effects were evaluated at zero mass transfer in a pilot-scale tray column, by
passing pure liquids and gases in counter current configuration. The pilot column was rectangular in
shape with internal dimensions of 175 mm by 635 mm. A chimney tray was used to capture the
weeping liquid, while a de-entrainment tray was used in combination with a mist eliminator pad to
capture the entrained liquid. The fractional hole areas for the sieve trays under investigation were
7%, 11% and 15% and the hole diameters were 3.2 mm (⅛ in.), 6.4 mm (¼ in.) and 12.7 mm (½ in.).
The experimental liquids were ethylene glycol, butanol, water and silicone oil, while the gases were
air and carbon dioxide (CO2).
These experimental measurements produced over 10 000 data points for entrainment and over 7
000 data points of weeping. The results were repeatable and the entrainment values compared
reasonably well with previous data produced by Nutter (1971) and Uys (2012).
The differences between entrainment for the different liquids were more significant in the spray
regime than in the froth regime, and butanol was entrained more readily than silicone oil, ethylene
glycol and water. Fluids that caused a larger spray layer in the dispersion zone produced more
entrainment. Entrainment increased with decreasing liquid density, decreasing liquid surface tension
and decreasing liquid viscosity. The more unstable the dispersion layer, the higher the entrainment.
The liquid density strongly influenced weeping, i.e. weeping increased with increasing liquid density.
On the other hand, gases with higher densities – and thus with a higher mass flow rates at similar
volumetric flow rates through the sieve tray – displayed less weeping and more entrainment than
less dense gases, because of an increased upward drag force on the fluids.
When considering tray geometry and when operating in the spray regime, the magnitude of
entrainment increased with decreasing fractional hole area, while the dependency of entrainment
on fractional hole area was more prominent at lower fractional hole areas. When operating in the
froth regime – typically above 23 m3/(h.m) – the fractional hole area had a relatively small influence
on the magnitude of entrainment, while the cross-flowing liquid rate dominated related effects. In the spray regime, i.e. typically below 23 m3/(h.m), the entrainment increased with increasing sieve
tray hole diameter, while hole diameter had a relatively small influence on entrainment at higher
liquid flow rates between 23 and 60 m3/(h.m). However, at even higher liquid flow rates in the froth
regime, i.e. above 60 m3/(h.m), the effect of hole diameter on the entrainment became more
prominent again, with increased entrainment for smaller hole diameters.
The effect of hole diameter on weeping differed with changing fluid combinations and the 12.7 mm
hole size caused notably less weeping than the 3.2 mm and 6.4 mm trays at higher liquid flow rates.
It is believed that weeping occurred preferentially at so-called localised high pressure zones on the
sieve tray. At high gas and liquid flow rates, the resultant extended dispersion layer allows minimal
intimate contact between the plate and the liquid (minimising such localized high-pressure zones). In
effect, the liquid ‘jumps’ over the entire flow path length in the test rig, thus resulting in low
weeping rates at high gas and liquid rates.
The effects of fractional hole area and hole diameter on entrainment and weeping can be correlated
with combinations of well-known hydrodynamic dimensionless numbers, such as the Weber number
(We), Froude number (Fr) and Reynolds number (Re). Within the limitations of this study, the
flow-Froude number was shown to be the most useful dimensionless number, since it displayed a
monotonic relationship with magnitude of entrainment for different combinations of fluid systems
and tray configurations. Furthermore, both the construction number and fluid density ratio could be
used in a sensible manner to correlate some of the effects of tray geometry on entrainment. / AFRIKAANSE OPSOMMING: Distillasie word wêreldwyd op groot en klein skaal toegepas as ʼn metode om chemiese komponente
van mekaar te skei, gebasseer op hul verskil in vlugtigheid. Die hidrodinamiese gedrag van
vloeistowwe en hul damp binne ʼn distillasiekolom beïnvloed die effektiwiteit van die
skeidingsproses. Hierdie studie beoog dus om bykomende insig te verskaf tot die hidrodinamika en
kapasiteitsbeperkings van ʼn plaat-distilleerkolom.
Die doelwit van die studie was om die invloed van die volgende veranderlikes op die meesleuring en
deurdripping van vloeistowwe te ondersoek:
- Gas- en vloeistof vloeitempo.
- Plaatgeometrie (i.e. gatdeursnit en fraksionele deurvloei-area).
- Vloeistofeienskappe (i.e. oppervlakspanning, viskositeit en digtheid).
- Gaseienskappe (i.e. viskositeit en digtheid). Die hidrodinamiese studie is uitgevoer in ʼn reghoekige plaatkolom met interne afmetings van
175 mm x 635 mm. Die vloeistof en gasfases is in kontak gebring op ʼn teenstroom basis, met geen
massa-oordrag wat plaasvind nie. ʼn Skoorsteenplaat het die vloeistof opgevang wat deurdrip terwyl
ʼn ekstra plaat aan die bokant van die kolom die meegesleurde vloeistof opgevang het. Hierdie
ekstra plaat is gebruik tesame met ʼn mis-elimineerder om al die meegesleurde vloeistof op te vang.
Plate met verskillende deurvloei-areas (7%, 11% en 15%) en gat deursnitte (3.2 mm, 6.4 mm en 12.7
mm) is gebruik in die ondersoek. Die vloeistowwe wat gebruik is, sluit in etileen glikol, butanol,
water en silikon olie. Lug en koolstofdioksied is as gasse gebruik.
Die eksperimentele data het goeie herhaalbaarheid getoon en is vergelykbaar met die gepubliseerde
data van Nutter (1971) en Uys (2012). Meer as 10 000 data punte is gemeet vir vloeistofmeesleuring
en meer as 7 000 vir deurdripping.
Die verskil in hoeveelheid meesleuring tussen die vloeistowwe, soos ondersoek in hierdie studie, was
mees beduidend in die spoei-regime. Butanol is die meeste meegesleur, gevolg deur silikon olie en
dan etileen glikol. Water is die minste meegesleur is. Vloeistowwe wat ʼn groter sproeivolume in die
dispersielaag bo die plaat gevorm het, is die meeste meegesleur. Meesleuring het toegeneem met ʼn
afname in digtheid, oppervlakspanning en viskositeit van die vloeistof. ʼn Onstabiele dispersielaag bo
die plaat het meer meesleuring tot gevolg gehad.
Vloeistofdeurdripping is sterk beïnvloed deur vloeistofdigtheid, i.e. deurdripping het sterk
toegeneem met digtheid. Gasse met ʼn hoër digtheid veroorsaak weer ʼn afname in deurdripping
a.g.v. die hoër opwaartse sleurkragte wat ʼn gas met hoë digtheid op die vloeistof uitoefen.
In die sproei-regime (tipies by vloeistofvloeitempos laer as 23 m3/(h.m) is gevind dat meesleuring
toeneem met ʼn afname in fraksionele deurvloei-area. Meesleuring se afhanklikheid van fraksionele
deurvloei-area was meer beduidend by laer fraksionele deurvloei-areas. In die skuim-regime (tipies
by vloeistofvloeitempos hoër as 23 m3/(h.m)) was die afhanklikheid van meesleuring op fraksionele
deurvloei-area relatief klein. In die sproei-regime is gevind dat meesleuring toeneem met ʼn toename in gat deursnit, terwyl
dieselfde veranderlike ʼn minder beduidende invloed op meesleuring getoon het by hoër
vloeistofvloeitempos (tussen 23 en 60 m3/(h.m)). By vloeitempos hoër as 60 m3/(h.m) het
meesleuring weer begin toeneem met ʼn afname in gat deursnit.
By hoë vloeistofvloeitempos het die plaat met 12.7 mm gat deursnit aansienlik minder deurdripping
getoon as plate met 3.2 mm en 6.4 mm deursnitte. Daar word vermoed dat deurdripping
hoofsaaklik plaasvind by lokale hoëdruk gebiede op die plaat. By hoër vloeistof- en gasvloeitempos
beslaan die dispersielaag ʼn groter volume en is daar dus minder gebiede van digte vloeistofkontak
met die plaat, wat ʼn afname in die lokale drukgebiede veroorsaak. Dit lei tot ʼn afname in
deurdripping by hoër gas- en vloeistofvloeitempos.
Die invloed van fraksionele deurvloei-area en gatdeursnit op meesleuring en deurdripping korreleer
goed met kombinasies van welbekende hidrodinamiese dimensielose getalle, i.e. die Webergetal
(We), die Froudegetal (Fr) en die Reynoldsgetal (Re). Die vloei-Froudegetal is mees bruikbaar om die
invloed van vloeistof-en-gas kombinasies en kolomuitleg op meesleuring te korreleer. Die
konstruksiegetal asook die digtheidsverhoudings tussen vloeistof en gas kan op ʼn sinvolle manier
aangewend word om van die invloede van plaatgeometrie op meesleuring te beskryf.
|
38 |
Modeling internal deformation of salt structures targeted for radioactive waste disposalChemia, Zurab January 2008 (has links)
<p>This thesis uses results of systematic numerical models to argue that externally inactive salt structures, which are potential targets for radioactive waste disposal, might be internally active due to the presence of dense layers or blocks within a salt layer.</p><p>The three papers that support this thesis use the Gorleben salt diapir (NW Germany), which was targeted as a future final repository for high-grade radioactive waste, as a general guideline.</p><p>The first two papers present systematic studies of the parameters that control the development of a salt diapir and how it entrains a dense anhydrite layer. Results from these numerical models show that the entrainment of a dense anhydrite layer within a salt diapir depends on four parameters: sedimentation rate, viscosity of salt, perturbation width and the stratigraphic location of the dense layer. The combined effect of these four parameters, which has a direct impact on the rate of salt supply (volume/area of the salt that is supplied to the diapir with time), shape a diapir and the mode of entrainment. Salt diapirs down-built with sedimentary units of high viscosity can potentially grow with an embedded anhydrite layer and deplete their source layer (salt supply ceases). However, when salt supply decreases dramatically or ceases entirely, the entrained anhydrite layer/segments start to sink within the diapir. In inactive diapirs, sinking of the entrained anhydrite layer is inevitable and strongly depends on the rheology of the salt, which is in direct contact with the anhydrite layer. During the post-depositional stage, if the effective viscosity of salt falls below the threshold value of around 10<sup>18</sup>-10<sup>19</sup> Pa s, the mobility of anhydrite blocks might influence any repository within the diapir. However, the internal deformation of the salt diapir by the descending blocks decreases with increase in effective viscosity of salt.</p><p>The results presented in this thesis suggest that it is highly likely that salt structures where dense and viscous layer/blocks are present undergo an internal deformation processes when these dense blocks start sinking within the diapir. Depending on size and orientation of these blocks, deformation pattern is significantly different within the diapir. Furthermore, model results applied to the Gorleben diapir show that the rate of descent of the entrained anhydrite blocks differs on different sides of the diapir. This suggests that if the anhydrite blocks descent within the Gorleben diapir, they initiate an asymmetric internal flow within it.</p>
|
39 |
Contrasting aerosol refractive index and hygroscopicity in the inflow and outflow of deep convective storms: Analysis of airborne data from DC3Sorooshian, Armin, Shingler, T., Crosbie, E., Barth, M. C., Homeyer, C. R., Campuzano-Jost, P., Day, D. A., Jimenez, J. L., Thornhill, K. L., Ziemba, L. D., Blake, D. R., Fried, A. 27 April 2017 (has links)
We examine three case studies during the Deep Convective Clouds and Chemistry (DC3) field experiment when storm inflow and outflow air were sampled for aerosol subsaturated hygroscopicity and the real part of refractive index (n) with a Differential Aerosol Sizing and Hygroscopicity Probe (DASH-SP) on the NASA DC-8. Relative to inflow aerosol particles, outflow particles were more hygroscopic (by 0.03 based on the estimated parameter) in one of the three storms examined. Two of three control flights with no storm convection reveal higher values, albeit by only 0.02, at high altitude (> 8km) versus < 4km. Entrainment modeling shows that measured values in the outflow of the three storm flights are higher than predicted values (by 0.03-0.11) based on knowledge of values from the inflow and clear air adjacent to the storms. This suggests that other process(es) contributed to hygroscopicity enhancements such as secondary aerosol formation via aqueous-phase chemistry. Values of n were higher in the outflow of two of the three storm flights, reaching as high as 1.54. More statistically significant differences were observed in control flights (no storms) where n decreased from 1.50-1.52 (< 4km) to 1.49-1.50 (> 8km). Chemical data show that enhanced hygroscopicity was coincident with lower organic mass fractions, higher sulfate mass fractions, and higher O:C ratios of organic aerosol. Refractive index did not correlate as well with available chemical data. Deep convection is shown to alter aerosol radiative properties, which has implications for aerosol effects on climate.
|
40 |
A sincronização em dois ritmos da canção: uma observação experimental acerca da fala cantada / The Entrainment in two rhythms of the song: an experimental observation about sung speechSantos, Cássio Augusto Alves de Andrade 02 July 2012 (has links)
Este trabalho apresenta um estudo acerca da fala cantada com o português brasileiro inserido no contexto da canção popular. Utilizando como base o processo de sincronização entre os pares de quatro duplas de cantores, elaboramos um experimento fatorial com dois fatores, denominados Ritmo da Canção e Ponto de Observação de Sincronização. Com o fator Ritmo da Canção, buscamos observar se a fala cantada inserida no contexto sincopado, no caso o da bossa-nova, é mais difícil de ser realizada quando comparada a mesma inserida no contexto não sincopado, aqui o do rock. Com o fator Ponto de Observação de Sincronização buscamos observar se os sujeitos têm a mesma capacidade de sincronização em inícios e em finais de frases. Ambos os cálculos foram realizados através das medidas das lags, diferença temporal entre os Pontos de Observação de Sincronização dos cantores de uma mesma dupla, ou seja, ora separamos as lags por canções (fator Ritmo da Canção), ora separamos por ponto (fator Ponto de Observação de Sincronização). Em paralelo, e de forma a complementar o estudo fonético-acústico, observamos o desenvolvimento métrico-acentual das canções, comparando os acentos lingüísticos e os musicais das canções utilizadas. O conjunto de resultados obtidos por meio de cálculos estatísticos e as observações métricoacentuais indicam que os cantores apresentam maior facilidade em realizar a tarefa pedida cantar o mais sincrônico possível no contexto no qual o ritmo de acompanhamento das canções não era sincopado, assim como indica maior facilidade em sincronizar nos finais de sentenças. / This paper presents a study about the Brazilian Portuguese placed in the context of the song. Using as a base the entrainment process between pairs of four pairs of singers, we designed a factorial experiment with two factors, called Rhythm of the Song and Entrainment Observation Point. With the factor Rhythm of the Song, we observe whether the speech into the context of singing bossa-nova is more difficult to achieve when compared to the same inserted in the context of rock. With the factor Entrainment Observation Point we seek to observe whether individuals have the same ability to sync at the beginning and end of sentences. Both calculations were performed by measuring the lag, time difference between entrainment observation points of the singers of the same pair, i.e., separated the lag by songs (factor Rhythm of the Song), and separated by Entrainment Observation Point (factor Entrainment Observation Point). In parallel, and to complement the acousticphonetic study, we observed the development of accentual metric-songs comparing the linguistic and musical accents of the songs used. The set of results obtained by statistical calculation and accentual-metric observations indicates that the singers have it easier to perform the requested task - to sing as synchronous as possible - in the context in which the rhythm accompaniment of songs was not syncopated, so ease as indicated to sync at the end of sentences.
|
Page generated in 0.057 seconds