Commercial video games have a great potential in battling the ongoing environmental crises. However, literature has so far largely neglected a connection between environmental sustainability and commercial video games. Therefore, this thesis analyses environmental sustainability incorporations in commercial video games by conducting a case study on Horizon Forbidden West (HFW). This case study is executed with help of an originally developed analytical model called Dimensions of Environmentally Sustainable Gameplay. The case study concludes that HFW especially excels in creating a realistic environmentally sustainable game world. Other dimensions of environmentally sustainable gameplay such as environmental objects, agents and events, need more improvement. HFW shows problematic incorporation of video game objects as it is merely based on mastering the environment in the form of resource extraction. The research findings indicate that HFW’s producers have not yet uncovered the medium’s full potential. This thesis encourages further research into environmental sustainability in commercial video games and provides commercial video game producers with the necessary tools to create future games with improved environmental considerations.

<p dir="ltr">Improving environmental sustainability in energy production and waste management are of critical importance. Anaerobic digestion (AD) uses microbes to biologically decompose organic waste and produce biogas, which can be used for various forms of sustainable energy. It can be particularly valuable for livestock facilities considering AD of their manure, and potentially other feedstocks as well, a process known as co-digestion. Improved understanding of co-digestion of agro-industrial feedstocks is critical for these facilities. Understanding the macromolecular composition (carbohydrate, protein, and lipid portions) of potential AD feedstocks has the potential to provide important information for predicting important parameters of AD behavior. However, the stability of these macromolecules in AD samples during long-term storage must be confirmed. Furthermore, synergistic and antagonistic impacts of co-digestion on methane production and digestate composition need to be more thoroughly explored.</p><p dir="ltr">This dissertation investigates the impact of storage at refrigeration temperatures (4°C) for up to one-year on the macromolecular composition of various agro-industrial feedstocks (beef manure, starch, slaughterhouse waste, soap stock, and filter press slurry) and anaerobic co-digestion samples. These same feedstocks were co-digested with manure in batch digesters at different proportions, using two or three feedstocks to determine possible synergistic effects.</p><p dir="ltr">The findings show that minimal macromolecular degradation occurred in AD samples during storage at refrigeration temperatures for up to one-year. A major exception was samples containing high concentrations of readily biodegradable starches, which did experience >50% carbohydrate degradation. This indicates a need for methodological rigor during sample storage and reporting experimental design.</p><p dir="ltr">Furthermore, the co-digestion experiments demonstrated frequent improvements or synergy in specific methane yield, methane production rate, and a wide variety of physical and chemical parameters in the digester effluent. Specific methane yield was shown to be at least additive, with improvement ranging from 3-168%. Some improvements in kinetic performance were also observed and quantified. Statistical results suggest that influent characteristics could be useful as predictors for methane production. This research could catalyze additional work needed to optimize co-digestion feeding strategies for full-scale digesters.</p>

<p>Biodegradation of untreated cotton, linen, and hemp textiles as three substrates – measured through biogas production – was studied to compare digestion yield and the ability of anaerobic sludge as inoculum to utilize the sugars in these textiles without pretreatment. Digestion of these textile substrates was carried out over a 26-day study, with daily sampling of biogas production, to measure biogas production rate and accumulation. The flasks were maintained at 37 °C and 150 RPM with a substrate to inoculum ratio (SIR) of 0.5 g sugars from substrate g-1 VSinoculum from anaerobic sludge. Biogas samples were analyzed through gas chromatography (GC) to determine general biogas composition produced by each textile. Biogas production was notable after the four-day mark; with first peaks occurring on day five (hemp, cellulose), day seven (cotton), and day nine (linen). Production of biogas in the control largely outperformed trials with no added substrate, but overall the methane fractions of the gas was lower than expected, indicating that pretreatment is likely necessary for more complete biodegradation of natural textiles. </p>

<p>Biomass liquefaction is a nascent field within biorefinery research and has arisen in response to the bottleneck created from materials handling at the front end of the biorefinery. The basic concept is that if the biomass were to be converted into a flowable slurry at the front-end of the process, then the material could smoothly flow into the biorefinery pretreatment and down time due to the material forming a plug would be minimized or eliminated. Three liquefaction routes were studied in this work. These routes were: enzyme route, enzyme mimetic route, and a combined route of enzyme and enzyme mimetic. Through a Techno-economic assessment (TEA), it is possible to determine which route is most-economical to scale up and also to understand the extent to which liquefaction increases/decreases of the price of the biorefinery product.</p> <p>Gasification is a bio-based technology that has recently acquired more attention as it is an efficient conversion process for a variety of feedstocks. As new techniques and process routes are discovered, it is important to analyze which process technique is feasible for commercial scale up, as the highest performing technique may not be the most economical option to pursue. Along the same philosophy, a process concept was developed on Aspen Plus® to treat syn-gas impurities and also recycle the spent solvents. A TEA study was performed to determine the unit cost of treatment and to explore avenues of cost saving.</p>

<p dir="ltr">Smart windows, dynamically adjusting optical transmittance, face global adoption challenges due to climatic and economic variability. Aiming these issues, we synthesized a methyl cellulose (MC) salt system with high tunability for intrinsic optical transmittance (89.3%), which can be applied globally to various locations. Specifically, the MC window has superior heat shielding potential below transition temperatures while turning opaque at temperatures above the Lower Critical Solution Temperature (LCST), reducing the solar heat gain by 55%. Such optical tunability is attributable to the particle size change triggered by the temperature-induced reversible coil-to-globular transition. This leads to effective refractive index and scattering modulation, making them prospective solutions for light management systems, an application ahead of intelligent fenestration systems. MC-based windows demonstrated a 9°C temperature decrease compared to double-pane windows on sunny days and a 5°C increase during winters in field tests, while simulations predict an 11% energy savings.</p><p dir="ltr">Incorporating MC-based phase change materials in passive solar panels indicated optimized energy efficiency, offering a sustainable alternative. Real-time simulations validate practical applicability in large-scale solar panels. Furthermore, a temperature-responsive sorbent with a dark layer demonstrates an optimal optical and water uptake performance. Transitioning between radiative cooling and solar heating, the sorbent exhibits high water harvesting efficiency in lab and field tests. With an adjustable LCST at 38 ℃, the cellulose-based sorbent presents a potential solution for atmospheric water harvesting, combining optical switching and temperature responsiveness for sustainable water access. Furthermore, the ubiquitous availability of materials, low cost, and ease-of-manufacturing will provide technological equity and foster our ambition towards net-zero buildings and sustainable future.</p>

<p>  </p> <p>Globally, communities are embracing the cured-in-place-pipe (CIPP) process due to the need to address damaged buried water and sewer pipes. CIPP involves the chemical manufacture of a new plastic pipe inside an existing buried water and sewer pipe, without the need for excavation. The process is popular because it can be 80% less costly than alternative methods and construction workers can be present for hours to not days to weeks. However, as CIPP use has grown, so have the number of hazardous material (HAZMAT) incidents caused by using this practice. Evacuations of daycare centers, schools, homes, healthcare, institutional, and other buildings have been caused. In some cases, chemical exposure victims have required medical assistance and hospital admission. For decades, organizations within the CIPP industry and municipalities have encouraged chemical waste discharge into ambient air, resulting in preventable exposures. Recent work has indicated tons of volatile organic compounds (VOC) may be released during a single CIPP project into the air. Chemicals released include hazardous air pollutants (HAP), carcinogens (CAR), endocrine disrupting chemicals (EDR), and other compounds with little toxicological information. While polymer composites have been manufactured for other applications for more than 50 years, little information exists about what chemicals and materials are used to manufacture CIPPs. As CIPP use has grown along with the number of bystander chemical exposures, concerns about the type, magnitude, and toxicity of chemical emissions from CIPP projects have markedly increased. To reduce the potential for human harm and environmental degradation, a better understanding of CIPP composite chemistry and manufacturing is needed. This dissertation aimed to elucidate the processes that control the composition of waste generated during plastic CIPP manufacture and ascertain how to modify the manufacturing practice to minimize impacts on composite integrity and emission toxicity. </p> <p>Chapter 1 focused on indoor VOC exposure simulation and styrene contamination/ decontamination to evaluate the risk of occupant exposure during CIPP installation. Styrene is a common monomer used in many CIPP resins and can be discharged into the air at CIPP worksites. A review of prior incidents revealed that CIPP waste (liquid, organic chemicals, etc.) could enter nearby buildings through multiple routes including windows, doors, or heating, ventilation, and air conditioning outdoor air intakes. When CIPP is manufactured inside a sanitary sewer pipe, waste can enter buildings through sewer laterals of nearby buildings and through foundation cracks. Study results showed that plumbing seal backflows in bathrooms caused by sewer repair work are hydraulically possible: the minimum pressure required to displace water in the plumbing trap was estimated to be 0.995 kPa and 8.85 kPa for a sink and toilet, separately. These pressures are much lower than those applied by the contractor during the sewer lining (up to 193.05 kPa). Based on the indoor exposure events, the dissipation potential of vapors, as well as the hydraulic calculations, indoor air chemical contamination and decontamination profiles were also examined. A mass balance model of chemical vapor dispersion was developed. Modeling results revealed that bathroom exhaust fan operation during a CIPP project can increase the indoor styrene concentration by enhancing the inflow of styrene-containing air from the sink and toilet. However, the styrene concentration decreased as air leaked across the bathroom door due to reduced suction in the plumbing. Based on incident reviews, chemical magnitudes, and modeling results it was concluded that CIPP waste discharge should be treated as hazardous material discharge, because of its threat to human health. Actions are needed to reduce waste generation and contain the waste, so it does not leave the worksite. Chapter 2 aimed to determine the manufacturing conditions that most influence chemical residual left in the thermally manufactured CIPP. Bench-scale testing of multiple styrene- and non-styrene composites revealed the manufacturing conditions (curing time, temperature, initiator loading) necessary to produce a high integrity composite while minimizing chemical residual and air emissions. Even though the VOC loading of the non-styrene resin (4 wt.%) was much less than that of styrene resin (39 wt.%), the non-styrene resin did contain HAP, EDR, CAR compounds including ethylbenzene, 2-ethylhexanoic acid, methacrylic acid, styrene, toluene, and <em>m</em>-xylene. Study results also revealed that by changing initiator loading a drastic reduction in the amount of styrene (-42 wt.%) and styrene oxide (-33 wt.%) residual left in the newly manufactured composite was achieved. Discoveries prompted a new hypothesis that this decreased residual also prompted a decreased amount of VOCs emitted into the air. The explanation is that this occurs because that a greater amount of the monomer styrene was incorporated into the resin during polymerization and not permitted to enter the air. Despite decades of polymer composite use, this study provides a new fundamental understanding of composite chemicals and techniques for reducing air pollutant emissions during plastic composite manufacture. In Chapter 3, the complexity of organic vapor chemicals found in the air during thermal heating of CIPP composites was explored and quantified. The emission rate of a popular monomer, styrene, was quantified from the materials before, during, and after composite manufacture. Scaling up bench-scale results, 1.9 to 14 US tons and 0.18 to 1.35 US tons of VOCs (0.05 to 0.36 US tons and 0.001 to 0.007 US tons of styrene) were estimated to be emitted during curing of styrene- and non-styrene CIPPs (i.e., typically 1-3 m of diameter pipes). By modifying standard air sampling methods, previously undetectable chemicals associated with CIPP manufacture were found in the styrene-laden air. These include acetophenone, benzaldehyde, phenol, and 1,3,5-trimethylbenzene. Results have immediate relevance to improved air monitoring for public and worker safety. Further, results can be used to examine the cumulative health and environmental risks of the CIPP pollutant mixtures. Chapter 4 focused on identifying CIPP technology/knowledge gaps and feedback from health officials from multiple state and federal agencies. Through this study, a public health workgroup was assembled to include disciplinary experts and 13 federal, state, and city health agencies and public health associations. Building on dialogue with U.S. health officials, the state of knowledge pertaining to CIPP chemical exposures, mitigation, and response actions was reviewed. Topics included 1) CIPP manufacturing process and waste; 2) sewers and buildings; 3) chemical exposure and health; 4) chemical risk assessment; 5) risk communication. This study helped establish relationships among federal, state, and city officials to improve public health response. Additionally, a primer for CIPP chemical fate and transport, as well as assisting in identifying and prioritizing public health information needs was developed. Identification and prioritization of current public health knowledge gaps and proposed practices for reducing exposures to the public and workers were reported. CIPP-related bench and research results throughout the dissertation can serve as an important basis for environmental policy and public health guidelines on the prevention and mitigation aspects of environmental and human health impacts resulting from CIPP manufacturing practices.</p>

<p>  </p> <p>The pandemic prompted buildings globally to transition to low or no occupancy as social distancing to reduce the spread of Coronavirus Disease (COVID-19). This consequence prompted concerns about the chemical and microbiological safety of building drinking water due to stagnation. At the same time, microplastic (MP) pollution received increasing global attention due to their presence in the environment and recent discoveries within water distribution systems and at building faucets. MP sources have primarily been targeted as originating within the drinking water sources, but plastic plumbing components are less discussed and known to deteriorate into fragments and smaller pieces that reach faucets. Literature at the time of this work as sparse on stagnation impacts to drinking water quality and the fate of MPs in plumbing. In particular, health officials and building owners issued and received many differed guidance documents telling building owners do different things and no standard guideline was available to reduce the health risks caused by stagnant building drinking water. This dissertation  examined three different types of buildings during closed to low water use conditions and conducted bench-scale testing to explore the phenomena observed in the field. Chapter 1 describes water quality impacts during a 7 year old ‘green’ middle school as it transitioned from Summer (low water use) to Fall (normal use). Field experiments revealed that more than half of first draw water samples exceeded the copper (acute) health-based action limit during low water use. Copper concentration within the school increased as distance from building entry point increased. Chapter 2 and 3 describe report on chemical and microbiological water quality in buildings at a university buildings (Chapter 2), and elementary school (Chapter 3). Chapters 2 and 3 revealed that stagnation negatively impacted chemical and microbiological building water quality (cold and hot) but flushing was effective at remediating high concentration of heavy metals and <em>Legionella pneumophila</em> at most locations. But in large buildings, where building plumbing system was more complicated, flushing did not always result in improved water quality. Also discovered was that water quality again deteriorated even after whole building water system was flushed. It is important to understand own building systems to maintain water quality as each building complexity requires specific knowledge and solutions. Chapter 4 describes current knowledge associated with MPs in drinking water and results of bench scale experiments on MP fate and transport in building plumbing. This work identified that while MPs have been reported at building faucets, sampling details lacking from available studies often resulted in study results not being comparable across others. Based on the review of the issue, it was found that MPs have likely reached building faucets for decades but have received no characterization until recently. Bench-scale testing using two MPs, of different density, in copper and crosslinked polyethylene (PEX) pipes revealed size influenced the amount of MPs retained in a pipe. Research needs were identified to determine the fundamental factors that control MP fate in plumbing and their presence at building faucets. </p>

<p>In this work, two overarching global crises are addressed with an engineering lens; the COVID-19 pandemic and climate change. Regarding the latter, an investigation is completed into the fluxes of CO2 in the wake of a simple wind farm for identification of potentially beneficial siting of Direct Capture of CO2. In this analysis, large-eddy simulations are used to quantify scalar entrainment in the turbines’ wake for several empirical CO2 profiles. In instances with positive or a combination of CO2 gradients, it was found that the concentration of CO2 increased in wake through downward mixing and entrainment. In a negative CO2 gradient, the opposite was found, with the wind turbine mixing away the increased surface<br> concentration and entraining down lower concentration air from above. These findings were used to make recommendations on scenarios in which wind turbines were beneficial to Direct Capture plants.<br> In addition, as part of the ongoing response to the COVID-19 pandemic, an innovative new technology was designed and constructed; a prototype photoacoustic spectrometer for the rapid detection of viruses. With the vision to become a viral "breathalyzer", the primary stage of development involved the creation of a prototype for proof-of-concept of viral detection using PAS. An extensive literature review was completed to determine optimal<br> design, with several distinct innovations integrated with the end-product in mind; such as a pure silicon resonator cell and a light-emitting diode source for low-cost, portable detection.<br> This was estimated to be of sufficient quality to detect single virions, as found through Finite Element Analysis.<br> Additionally, the validation of a proposed improvement on the medical mask, named Hy-Cu, is shown. Through various tests, Hy-Cu was found to have greater breathability than KN95 or surgical masks, as well as comparable efficiency in filtration of viral droplets.<br> Additionally, the novel inclusion of a diamond-like carbon-coated copper mesh layer resulted in viral inactivation of 99% after a period of 2 hours, allowing Hy-Cu to be safely reused without risk of transmission.<br> </p> <p> </p>

<p dir="ltr">The modern world faces many challenges related to sustainability, including the ability to make high-level decisions using a sustainability-oriented framework, a matter of increasing importance to the United States military with respect to energetic materials (EMs). Although a few pieces - process flowsheet optimization, life cycle assessment (LCA) studies, and the use of optimization tools to identify an option - have been studied and utilized, there exists no systematic approach that combines all these pieces to create a framework that allows for holistic decision making. This is especially true with EMs, other key critical materials, and new methods of manufacture. An interconnected framework for LCA-based decision making is developed and a tool based on this framework created for use with novel materials. The interconnected framework and tool are utilized in two case studies related to the manufacture of RDX- a lab-scale, batch-mode configuration and a simplified continuous-mode configuration, to determine the optimal reaction temperature.</p>

<p dir="ltr">Aquaculture is a controlled aquatic farming sector and one of the most important human food sources. Fish farming is one of the predominant, fast-growing sectors that supply seafood products worldwide. Along with its benefits, aquaculture practices can discharge large quantities of nutrients into the environment through non-treated or poorly treated wastewater. This study aims to understand the nutrient composition of fish wastewater and the use of indigenous bacteria, cyanobacteria, and microalgae as an alternative biological treatment method. Wastewater samples from a local fish farming facility were collected and treated using six different species of cyanobacteria and microalgae include <i>Chroococcus</i><i> </i><i>minutus</i>, <i>Porphyridium</i><i> </i><i>cruentum</i>, <i>Chlorella vulgaris</i>, <i>Microcystis aeruginosa</i>, <i>Chlamydomonas </i><i>reinhardtii</i>, and <i>Fischerella</i><i> </i><i>muscicola</i>. All the samples were incubated for 21 days, and the following parameters were measured weekly: Chemical oxygen demand (COD), phosphate, total dissolved nitrogen, and dissolved inorganic nitrogen. In addition, dissolved organic nitrogen (DON), bioavailable DON (ABDON), and biodegradable DON (BDON) were calculated from the mass-balance equations. Colorimetric and digestive methods were used for the parameter measurements. The results showed that <i>C. </i><i>reinhardtii</i> reduced the soluble COD concentration by 74.6%, DON by 94.3%, and phosphorous by more than 99%. Moreover, <i>M. aeruginosa</i>, and <i>C. </i><i>minutus</i> significantly reduced inorganic nitrogen species (>99%). This alternative fish wastewater treatment method was explored to gain insight into fish wastewater nutrient composition and to create a sustainable alternative to conventional fish wastewater treatment methods.<b> </b></p>