Energy saving and fuel consumption reduction techniques are among the principal interests for both academic institutions and industries, in particular, system optimization and hybridization. This paper presents a new hydraulic hybrid system layout for mobile machinery implemented on a middle size excavator. The hybridization procedure took advantage of a dynamic programming (DP) algorithm, which was also utilized for the hybrid components dimensioning and control strategy definition. A dedicated experimental activity on test bench was performed on the main components of the energy recovery system (ERS). The JCMAS working cycle was considered as the reference test for a fuel consumption comparison between the standard and the hybrid excavator. A fuel saving up to 8% on the JCMAS cycle, and up to 11% during the digging cycle, has been allowed by the proposed hybrid system.

When operating hydraulic mining excavators the loading equipment is exposed to harsh conditions which lead to extensive wear of the equipment, especially the bucket and bucket teeth. Simulations are used to better understand the wear development and to evaluate new methods to operate excavators more efficiently. At the Aitik mine, operated by the high-tech metal company Boliden Mines, hydraulic excavators are used when loading the mined ore. One of the hydraulic excavators used at Aitik is the Komatsu PC7000. In this master thesis, a simulation model for the hydraulic excavator Komatsu PC7000 was developed with the simulation software LS-DYNA. This model consists of multi rigid body dynamics to describe the motion of the excavator and a granular material model to describe the rocks loaded into the bucket of the excavator. Simulations with two different types of granular material models have been utilized to study the wear development of the bucket. One of the models (bonded DE model) uses bonded discrete elements to describe the large rocks and single discrete elements are used to describe smaller rocks. This model is compared to the current FE-DE model which is being used today at Boliden. This model uses finite elements (FE) to model the larger rocks and discrete element spheres (DES) for smaller rocks. By using the bonded DE method a 71\% reduction in simulation time could be achieved. This can be partly explained by the reduction of the number of elements included in the rock pile.  Archard's wear law was used to numerically describe the wear development of the bucket. When simulating the wear a total of 30 bucket fillings were performed with the excavator. This was done with both the bonded DE method and the FE-DE method. In this wear study, the inside of the bucket was of interest. The resulting simulated wear map was compared to experimental measurements from which the plate thickness of the bucket had been measured two times to obtain the wear depth of some points inside the bucket. The experimental measurements and two 3D scanned point clouds were used to determine the wear depth inside the bucket. Results from the simulation showed that the wear is concentrated to the center of the bucket while less wear is concentrated to the sides of the bucket. With the bonded DE method the wear appeared to be more evenly distributed inside the bucket while the wear from the FE-DE method appeared in spots inside the bucket. The experimental results also showed that the wear was more extensive in the center of the bucket and also in the back of the bucket. Both simulation methods also showed that the wear was concentrated to the back of the bucket. From the simulations, it was also seen that the behavior of the material flow differed between the two methods. In the bonded DE method the material flow had more sliding behavior while the material flow in the FE-DE method had more rolling behavior. This could also be the reason why the bonded DE method captures the wear more evenly. The rolling behavior seen in the FE-DE method leads to more impact wear which is not captured by Archard's wear law. Overall, the bonded DE method leads to a big reduction in simulation time which is favorable when it comes to simulation. The larger rocks will have simpler shapes without sharp corners. However, the method allows for a more complex shape than just an ordinary sphere which is the simplest and most common shape to describe granular material. The bonded DE method also allows for easier configuration of contact definition since fewer contact interfaces must be added to the model. Furthermore, the post-processing of wear in LS-DYNA was facilitated since the wear does not have to be divided into two wear collectors for FE elements and DE elements.

Diploma thesis discusses a design of a rail equipment that provides a rail capapility to a classic excavator. Strenght calculation using FEM method and data evaluation is included in. A concept of structure alterations is provided as a result of calculation. Evaluation of compliance with measures of rail operation is also present.

The high price of batteries in working machines with electric drives offer a potential for investment in energy-saving hydraulic systems. The decentralized power network opens up new approaches for hydraulic- and hybrid circuits. In addition, the regeneration of energy can be used at any point of the machine. For the example of an excavator arm drive with a double cylinder two compact hydraulic circuits are presented, which relieve a central hydraulic system.

Escavadeiras hidráulicas são máquinas versáteis, amplamente utilizadas na construção civil e mineração. Máquinas melhores, mais produtivas, eficientes e que oferecem segurança ao operador são uma demanda constante da indústria. Devido a estes fatores, o controle para a automação de uma escavadeira hidráulica tem sido investigado. Este estudo tem o seu foco voltado para o controle do manipulador do equipamento, que é considerado como um dos elementos fundamentais para o desenvolvimento de uma escavadeira automática. Para desenvolver um sistema de controle viável, primeiramente, foi realizado a modelagem matemática dos subsistemas mecânico e hidráulico do manipulador; posteriormente esses modelos foram acoplados para representar a interação dos subsistemas. Todos os modelos desenvolvidos foram comparados com modelos de referência, obtidos a partir de softwares comerciais dedicados a modelagem de sistema dinâmicos. Tendo sido verificado a capacidade de representação física dos modelos, a fase de projeto do controlador para o manipulador foi iniciada. Para que o controlador seja eficiente, este deve ter duas propriedades essenciais: robustez para lidar com as incertezas e distúrbios severos, e adaptabilidade para lidar com um ambiente de operação altamente dinâmico. A fim de projetar um controlador que considera a dinâmica de cada subsistema do manipulador, a técnica de controle em cascata foi adotada. Esta consiste em dividir o sistema global em subsistemas, de tal forma que seja possível projetar um controlador para cada subsistema. Devido à complexidade do modelo matemático, técnicas avançadas de controle linear e não linear foram combinadas no projeto dos controladores dos subsistemas. O controlador sintetizado foi testado através de simulação numérica, em ambiente MATLAB/Simulink®, na execução de um ciclo completo de trabalho pelo manipulador. Os resultados obtidos foram considerados satisfatórios, mesmo na presença de incertezas, distúrbios severos e de ruídos. Posteriormente, na comparação desses resultados com os de outros controladores, ficou claro que o melhor desempenho foi obtido com o controlador proposto. Isto indica a possível aplicabilidade de tal controlador para a automação deste tipo de equipamento. / Hydraulic excavators are versatile machines, widely used in civil construction and in mining. Better, more productive, and efficient machines that offer operator safety are a constant industry demand. Due to these factors, the control for the automation of a hydraulic excavator has been investigated. This study focuses on the control of the equipment\'s manipulator, which is considered as one of the fundamental elements for the development of an automatic excavator. To develop a viable control system, first, the mathematical modeling of the mechanical and hydraulic subsystems of the manip-ulator was carried out; later these models were coupled to represent the interaction between the subsystems. All the developed models were compared with reference models, obtained from a commercial software dedicated to dynamic system modeling. Having verified the physical representation capacity of the analytical models, the de-sign phase of the controller was started. For the controller to be efficient, it must have two essential properties: robustness to deal with severe uncertainties and disturb-ances, and adaptability to handle a highly dynamic operating environment. To design a controller that considers the dynamics of each subsystem of the manipulator, the cascade control technique was adopted. This consists of dividing the global system into subsystems, in such a way that it is possible to design a controller for each sub-system. Due to the complexity of the mathematical model, advanced linear and non-linear control techniques were combined in subsystem controllers design. The synthe-sized controller was tested by numerical simulation, in MATLAB/Simulink® environ-ment, in the execution of a complete work operation by the manipulator. The results obtained were considered satisfactory, even in the presence of uncertainties, severe disturbances and noise. Subsequently, in the comparison of these results with those of others controllers, it was clear that the best performance was obtained with the pro-posed controller. This indicates the possible applicability of such a controller to the automation of this type of equipment.

Supplying haptic or force feedback to operators using hydraulic machinery such as excavators has the potential to increase operator capabilities. Haptic, robotic, human-machine interfaces enable several enhancing features including coordinated motion control and programmable haptic feedback. Coordinated or resolved motion control supplies a more intuitive means of specifying the equipment's motion. Haptic feedback is used to relay meaningful information back to the user in the form of force signals about digging force acting on the bucket, programmable virtual constraints and system limitations imposed by the mechanism, maximum pressure or maximum flow. In order to make this technology economically viable, the benefits must offset the additional cost associated with implementation. One way to minimize this cost is to not use high-end hydraulic components. For smaller backhoes and mini-excavators this means that the hydraulic systems are comprised of a constant displacement pump and proportional direction control valves. Hydraulic and haptic control techniques suitable for backhoes/excavators are developed and tested on a small backhoe test-bed. A virtual backhoe simulator is created for controller design and human evaluation. Not only is the virtual simulator modeled after the test-bed, but the control algorithm used in the simulator is the same as the actual backhoe test-bed. Data from human subject tests are presented that evaluate the control strategies on both the real and virtual backhoe. The end goal of this project is to incorporate coordinated haptic control algorithms that work with low-cost systems and maximize the enhancement of operator capabilities.

This thesis presents a technique termed Blended Shared Control, whereby a human operator's commands are merged with the commands of an electronic agent in real time to control a manipulator. A four degree-of-freedom hydraulic excavator is used as an application example, and two types of models are presented: a fully dynamic model incorporating the actuator and linkage systems suitable for high-fidelity user studies, and a reduced-order velocity-constrained kinematic model amenable for real-time optimization. Intended operator tasks are estimated with a recursive algorithm; the task is optimized in real time; and a command perturbation is computed which, when summed with the operator command, results in a lower task completion time. Experimental results compare Blended Shared Control to other types of controllers including manual control and haptic feedback. Trials indicate that Blended Shared Control decreases task completion time when compared to manual operation.

Escavadeiras hidráulicas são máquinas versáteis, amplamente utilizadas na construção civil e mineração. Máquinas melhores, mais produtivas, eficientes e que oferecem segurança ao operador são uma demanda constante da indústria. Devido a estes fatores, o controle para a automação de uma escavadeira hidráulica tem sido investigado. Este estudo tem o seu foco voltado para o controle do manipulador do equipamento, que é considerado como um dos elementos fundamentais para o desenvolvimento de uma escavadeira automática. Para desenvolver um sistema de controle viável, primeiramente, foi realizado a modelagem matemática dos subsistemas mecânico e hidráulico do manipulador; posteriormente esses modelos foram acoplados para representar a interação dos subsistemas. Todos os modelos desenvolvidos foram comparados com modelos de referência, obtidos a partir de softwares comerciais dedicados a modelagem de sistema dinâmicos. Tendo sido verificado a capacidade de representação física dos modelos, a fase de projeto do controlador para o manipulador foi iniciada. Para que o controlador seja eficiente, este deve ter duas propriedades essenciais: robustez para lidar com as incertezas e distúrbios severos, e adaptabilidade para lidar com um ambiente de operação altamente dinâmico. A fim de projetar um controlador que considera a dinâmica de cada subsistema do manipulador, a técnica de controle em cascata foi adotada. Esta consiste em dividir o sistema global em subsistemas, de tal forma que seja possível projetar um controlador para cada subsistema. Devido à complexidade do modelo matemático, técnicas avançadas de controle linear e não linear foram combinadas no projeto dos controladores dos subsistemas. O controlador sintetizado foi testado através de simulação numérica, em ambiente MATLAB/Simulink®, na execução de um ciclo completo de trabalho pelo manipulador. Os resultados obtidos foram considerados satisfatórios, mesmo na presença de incertezas, distúrbios severos e de ruídos. Posteriormente, na comparação desses resultados com os de outros controladores, ficou claro que o melhor desempenho foi obtido com o controlador proposto. Isto indica a possível aplicabilidade de tal controlador para a automação deste tipo de equipamento. / Hydraulic excavators are versatile machines, widely used in civil construction and in mining. Better, more productive, and efficient machines that offer operator safety are a constant industry demand. Due to these factors, the control for the automation of a hydraulic excavator has been investigated. This study focuses on the control of the equipment\'s manipulator, which is considered as one of the fundamental elements for the development of an automatic excavator. To develop a viable control system, first, the mathematical modeling of the mechanical and hydraulic subsystems of the manip-ulator was carried out; later these models were coupled to represent the interaction between the subsystems. All the developed models were compared with reference models, obtained from a commercial software dedicated to dynamic system modeling. Having verified the physical representation capacity of the analytical models, the de-sign phase of the controller was started. For the controller to be efficient, it must have two essential properties: robustness to deal with severe uncertainties and disturb-ances, and adaptability to handle a highly dynamic operating environment. To design a controller that considers the dynamics of each subsystem of the manipulator, the cascade control technique was adopted. This consists of dividing the global system into subsystems, in such a way that it is possible to design a controller for each sub-system. Due to the complexity of the mathematical model, advanced linear and non-linear control techniques were combined in subsystem controllers design. The synthe-sized controller was tested by numerical simulation, in MATLAB/Simulink® environ-ment, in the execution of a complete work operation by the manipulator. The results obtained were considered satisfactory, even in the presence of uncertainties, severe disturbances and noise. Subsequently, in the comparison of these results with those of others controllers, it was clear that the best performance was obtained with the pro-posed controller. This indicates the possible applicability of such a controller to the automation of this type of equipment.

The design of the excavator follows requirements of machines for demolition work. The excavator is equipped with an innovative type of under carriage, which not only increases mobility over the demolition sites but also the visibility from the driver’s cabin. The components of the excavator, that improve the demolition work, are special types of tracks, suspensions and articulated steering. Tracks can change their shape to increase the stability and also to adapt to the diff erent types of ground. The suspensions with tracks are able to adapt to the terrain thereby they lighten the asperity. Suspension can also tilt or even raise the excavator and thereby increase the angle of visibility from the cabin. This function is necessary mainly when taking down higher constructions. Articulated steering is a new function that has never been used for excavators. This steering was chosen due to fl exible movement over demolition sites. The main aim of the project is to create a new design of the excavator, but more importantly to distinguish the excavator from the excavators already on the market, with regards to its esthetics and under carriage innovation.

The high price of batteries in working machines with electric drives offer a potential for investment in energy-saving hydraulic systems. The decentralized power network opens up new approaches for hydraulic- and hybrid circuits. In addition, the regeneration of energy can be used at any point of the machine. For the example of an excavator arm drive with a double cylinder two compact hydraulic circuits are presented, which relieve a central hydraulic system.