The thesis seeks to clarify the development of early Christian understanding of Jesus as the pre-existent Son of God. We propose that its roots lie principally in early Christian exegesis of psalms in the light of Jesus' self-consciousness of divine sonship and divine mission. Part I reviews recent attempts to explain the development as a result of the influence of Jewish angelology and similar speculations. In Part II we argue that neither the personification of various attributes of God, including Wisdom, nor speculations about principal angels and a pre-existent messiah in Second Temple Judaism ever provided a ready-made category for viewing Jesus as a divine and pre-existent being alongside God. In Part III an examination of the Synoptic evidence for Jesus' self-consciousness of divine sonship and divine mission in the whole context of his life and teaching shows that his self-understanding was open to interpretation in terms of pre-existence. Part IV examines the early Christian use of Pss 110:1 and 2:7 against this background. We propose that the root of pre-existent Son christology is to be found in early Christian exegesis of these two messianic psalms (the catalyst) in the light of Jesus' self-consciousness of divine sonship and divine mission (the foundation). The tremendous impact left by the resurrection event and the resulting conception of Jesus "literally" enthroned to God's right hand led them to see Jesus as the pre-existent Lord and Son of God. In Part V it is argued that the pre-Pauline 'sending' formula "God sent his Son" (Gal 4:4-5; Rom 8:304; Jn 3:16-17; and 1 Jn 4:9) derives from this understanding of Jesus as the pre-existent Son of God rather than from divine wisdom christology. Once Jesus' divinity and pre-existence were confirmed through the exegesis of the psalms, Jewish wisdom traditions were helpful in drawing out the fall significance of his pre-existence in terms of his being active in creation and co-eternal with God the Father.

O presente trabalho, plasmado em metodologia jurídica, reflete criticamente sobre o problema da motivação da sentença civil como elemento de organização e de funcionamento do Estado Constitucional Democrático de Direito. A motivação é condição essencial de jurisdicionalidade, no sentido de que sem motivação não há exercício legítimo da função jurisdicional. O trabalho faz uma abordagem da natureza da motivação como discurso justificativo, jurídico e racional, da validade dos critérios de escolha ou de valoração empregados pelo juiz em sua decisão. O raciocínio do juiz é apresentado sob dupla feição: raciocínio decisório interno (contexto de descoberta ou deliberação) e raciocínio justificativo externo (contexto de justificação ou de validação). O conjunto das funções técnico-instrumental (endoprocessual) e político-garantística (extraprocessual) é objeto de investigação. A motivação, nos planos teórico e prático, exerce também a função de garantia do garantismo processual. A tese da inexistência jurídica da sentença tem três eixos teóricos: omissão total da motivação gráfica; falta de motivação ideológica, equiparada à hipótese de ausência de motivação gráfica; incompatibilidade lógica radical entre as premissas ou entre as premissas e a conclusão final, que também equivale à ausência total de motivação. O trabalho retrata um modelo de injustiça atemporal vivificado pelo juiz Crono, oposto à motivação como inestimável fator de legitimação argumentativa da jurisdição. A obrigatoriedade de motivação pública é o traço característico da jurisdição de nossa contemporaneidade e representa a maior conquista civilizatória do processo équo e justo. / This work, shaped in juridical methodology, critically reflects on the problem of motivation of civil judgment as an element of organization and functioning of the Democratic Constitutional State of Law. Motivation is an essential condition of jurisdiction, in the sense that without motivation there is no legitimate exercise of the jurisdictional function. The work makes an approach to the nature of motivation as a justificative discourse, juridical and rational, of the validity of choice or valuation criteria employed by the judge in its decision. The reasoning of the judge ispresented in double feature: internal decision-making reasoning (context of discovery or deliberation) and external justificative reasoning (context of justification or validation). The set of the technical-instrumental function (endoprocedural) and the political-rights assurance function (extraprocedural) is object of investigation. Motivation, in the theoretical and practical levels, also exerts the function of guarantee of the procedural right assuring mechanism. The thesis of the juridical validity of the judgment has three theoretical axes: total omission of the graphical motivation; lack of ideological motivation, equated to the hypothesis of nonexistence of the graphical motivation; radical logical incompatibility between the premises or between premises and the finalconclusion, which is also equivalent to the total lack of motivation. The work depicts a model of timeless injustice vivified by the judge Crono, opposite to the motivation as an invaluable factor of argumentative legitimacy of jurisdiction. Mandatory public motivation is the characteristic feature of the jurisdiction of our times and represents the greatest civilizing conquest of equal and fair proceeding.

O presente trabalho, plasmado em metodologia jurídica, reflete criticamente sobre o problema da motivação da sentença civil como elemento de organização e de funcionamento do Estado Constitucional Democrático de Direito. A motivação é condição essencial de jurisdicionalidade, no sentido de que sem motivação não há exercício legítimo da função jurisdicional. O trabalho faz uma abordagem da natureza da motivação como discurso justificativo, jurídico e racional, da validade dos critérios de escolha ou de valoração empregados pelo juiz em sua decisão. O raciocínio do juiz é apresentado sob dupla feição: raciocínio decisório interno (contexto de descoberta ou deliberação) e raciocínio justificativo externo (contexto de justificação ou de validação). O conjunto das funções técnico-instrumental (endoprocessual) e político-garantística (extraprocessual) é objeto de investigação. A motivação, nos planos teórico e prático, exerce também a função de garantia do garantismo processual. A tese da inexistência jurídica da sentença tem três eixos teóricos: omissão total da motivação gráfica; falta de motivação ideológica, equiparada à hipótese de ausência de motivação gráfica; incompatibilidade lógica radical entre as premissas ou entre as premissas e a conclusão final, que também equivale à ausência total de motivação. O trabalho retrata um modelo de injustiça atemporal vivificado pelo juiz Crono, oposto à motivação como inestimável fator de legitimação argumentativa da jurisdição. A obrigatoriedade de motivação pública é o traço característico da jurisdição de nossa contemporaneidade e representa a maior conquista civilizatória do processo équo e justo. / This work, shaped in juridical methodology, critically reflects on the problem of motivation of civil judgment as an element of organization and functioning of the Democratic Constitutional State of Law. Motivation is an essential condition of jurisdiction, in the sense that without motivation there is no legitimate exercise of the jurisdictional function. The work makes an approach to the nature of motivation as a justificative discourse, juridical and rational, of the validity of choice or valuation criteria employed by the judge in its decision. The reasoning of the judge ispresented in double feature: internal decision-making reasoning (context of discovery or deliberation) and external justificative reasoning (context of justification or validation). The set of the technical-instrumental function (endoprocedural) and the political-rights assurance function (extraprocedural) is object of investigation. Motivation, in the theoretical and practical levels, also exerts the function of guarantee of the procedural right assuring mechanism. The thesis of the juridical validity of the judgment has three theoretical axes: total omission of the graphical motivation; lack of ideological motivation, equated to the hypothesis of nonexistence of the graphical motivation; radical logical incompatibility between the premises or between premises and the finalconclusion, which is also equivalent to the total lack of motivation. The work depicts a model of timeless injustice vivified by the judge Crono, opposite to the motivation as an invaluable factor of argumentative legitimacy of jurisdiction. Mandatory public motivation is the characteristic feature of the jurisdiction of our times and represents the greatest civilizing conquest of equal and fair proceeding.

Research and Development engineering is at the corner stone of humanity’s evolution. It is perceived to be a systematic creative process which ultimately improves the living standard of a society through the creation of new applications and products. The commercial paradigm that governs project selection, resource allocation and market penetration prevails when the focus shifts from pure research to applied research. Furthermore, the road to success through commercialisation is difficult for most inventors, especially in a vast and isolated country such as Australia which is located a long way from wealthy and developed economies. While market leading products are considered unique, the actual process to achieve these products is essentially the same; progressing from an idea, through development to an outcome (if successful). Unfortunately, statistics indicate that only 3% of ‘ideas’ are significantly successful, 4% are moderately successful, and the remainder ‘evaporate’ in that form (Michael Quinn, Chairman, Innovation Capital Associates Pty Ltd). This study demonstrates and analyses two techniques developed by the author which reduce uncertainty in the engineering design and development phase of new product development and therefore increase the probability of a successful outcome. This study expands the existing knowledge of the engineering design and development stage in the new product development process and is couched in the identification of practical methods, which have been successfully used to develop new products by Australian Small Medium Enterprise (SME) Excel Technology Group Pty Ltd (ETG). Process theory is the term most commonly used to describe scientific study that identifies occurrences that result from a specified input state to an output state, thus detailing the process used to achieve an outcome. The thesis identifies relevant material and analyses recognised and established engineering processes utilised in developing new products. The literature identified that case studies are a particularly useful method for supporting problem-solving processes in settings where there are no clear answers or where problems are unstructured, as in New Product Development (NPD). This study describes, defines, and demonstrates the process of new product development within the context of historical product development and a ‘live’ case study associated with an Australian Government START grant awarded to Excel Technology Group in 2004 to assist in the development of an image-based vehicle detection product. This study proposes two techniques which reduce uncertainty and thereby improve the probability of a successful outcome. The first technique provides a predicted project development path or forward engineering plan which transforms the initial ‘fuzzy idea’ into a potential and achievable outcome. This process qualifies the ‘fuzzy idea’ as a potential, rationale or tangible outcome which is within the capability of the organisation. Additionally, this process proposes that a tangible or rationale idea can be deconstructed in reverse engineering process in order to create a forward engineering development plan. A detailed structured forward engineering plan reduces the uncertainty associated with new product development unknowns and therefore contributes to a successful outcome. This is described as the RETRO technique. The study recognises however that this claim requires qualification and proposes a second technique. The second technique proposes that a two dimensional spatial representation which has productivity and consumed resources as its axes, provides an effective means to qualify progress and expediently identify variation from the predicted plan. This spatial representation technique allows a quick response which in itself has a prediction attribute associated with directing the project back onto its predicted path. This process involves a coterminous comparison between the predicted development path and the evolving actual project development path. A consequence of this process is verification of progress or the application of informed, timely and quantified corrective action. This process also identifies the degree of success achieved in the engineering design and development phase of new product development where success is defined as achieving a predicted outcome. This spatial representation technique is referred to as NPD Mapping. The study demonstrates that these are useful techniques which aid SMEs in achieving successful new product outcomes because the technique are easily administered, measure and represent relevant development process related elements and functions, and enable expedient quantified responsive action when the evolving path varies from the predicted path. These techniques go beyond time line representations as represented in GANTT charts and PERT analysis, and represent the base variables of consumed resource and productivity/technical achievement in a manner that facilitates higher level interpretation of time, effort, degree of difficulty, and product complexity in order to facilitate informed decision making. This study presents, describes, analyses and demonstrates an SME focused engineering development technique, developed by the author, that produces a successful new product outcome which begins with a ‘fuzzy idea’ in the mind of the inventor and concludes with a successful new product outcome that is delivered on time and within budget. Further research on a wider range of SME organisations undertaking new product development is recommended.

This Master Thesis is the research done in the country of Rwanda. The project leads to study the climate of this country in order to establish whether this climate could be used to produce energy from air and to implement the first wind turbine for serving the nation.   After an introduction about the historical background of wind power, the thesis work deals with assessment of wind energy potential of Rwanda in focusing of the most suitable place for wind power plants. The best location with annual mean wind speed, the rate of use of turbine with hub height for an annual production per year, the mean wind speeds for 6 sites of Rwanda based on ECMWF for climatic data for one year at relief of altitude of 100m and coordinates are reported too.   The result of energy produced and calculations were done based on power hitting wind turbine generator in order to calculate Kinetic energy and power available at the best location to the measurement over the period of 12 months, that could be hoped for long term.   With help of logarithmic law, where wind speed usually increases with increasing in elevation and the desired wind speeds at all 6 sites were used. The annual energy production was taken into account at the best site with desired wind speed at the initial cost of turbine as well as the cost of energy (COE).However, with comparison of the tariff of EWSA, the price of Wind designed in this Research per kWh is cheaper and suitable for people of Rwanda. / <p><em>Rwanda has considerable opportunities development energy from hydro sources, methane gas, solar and peat deposits. Most of these energy sources have not been fully exploited, such as solar, wind and geothermal. As such wood is still being the major source of energy for 94 per cent of the population and imported petroleum products consume more than 40 per cent of foreign exchange. Energy is a key component of the Rwandan economy. It is thus recognized that the current inadequate and expensive energy supply constitutes a limiting factor to sustainable development. Rwanda’s Vision 2020 emphasizes the need for economic growth, private investment and economic transformation supported by a reliable and affordable energy supply as a key factor for the development process. To achieve this transformation, the country will need to increase energy production and diversify into alternative energy sources. Rwandan nations don’t have small-scale solar, wind, and geothermal devices in operation providing energy to urban and rural areas. These types of energy production are especially useful in remote locations because of the excessive cost of transporting electricity from large-scale power plants. The application of renewable energy technology has the potential to alleviate many of the problems that face the people of Rwanda every day, especially if done so in a sustainable manner that prioritizes human rights.</em></p>