The results of a solid-state 11B NMR study of a series of boronic acids, boronic esters, and boronic acid catechol cyclic esters with aromatic substituents are reported in this thesis. Boron-11 electric field gradient (EFG) and chemical shift (CS) tensors obtained from analyses of spectra acquired in magnetic fields of 9.4 T and 21.1 T are demonstrated to be useful for gaining insight into the molecular and electronic structure about the boron nucleus. It can be concluded that when adequate electronic variation is present in the compounds being studied, Ω is generally the most characteristic boron NMR parameter of the molecular and electronic environment for boronic acids and esters. Importantly, these data are only reliably accessible in ultrahigh magnetic fields. The experimental span values result from a delicate interplay of several competing factors, including hydrogen bonding, the value of the dihedral angle, and the type of aromatic ring system present.

This cumulative dissertation is a compilation of eight peer-reviewed, published scientific papers on the subject of two microscopic techniques of diffusion measurement, namely infrared (IR) microimaging and pulsed field gradient (PFG) NMR. The dissertation contains mainly five chapters. The first chapter introduces diffusion phenomena in general and concisely explains the importance and the current challenges of the investigation of molecular diffusion in nanoporous materials, which are the primary motivations behind the present work. To rise the challenges, it proposes an option of employing IR microimaging in parallel with PFG NMR in the measurement of the molecular diffusion. The second chapter describes the basic principles of the two diffusion measurement techniques and what they are capable of. Chapters 3 and 4 deliver convincing demonstrations of their applicability and potential in diffusion studies. Lastly, Chapter 5 concludes the present work by discussing complementary benefits of the two techniques, along with the novel application of the two-region model for assessing mass transfer in hierarchically porous materials.:Table of Contents CHAPTER 1. Introduction CHAPTER 2. Basics of diffusion measurement techniques 2.1. Introduction to infrared microscopy (IRM) 2.1.1. Working principle 2.1.2. Experimental setup 2.2. Introduction to pulsed field gradient nuclear magnetic resonance (PFG NMR) 2.2.1. Self-diffusion and propagator 2.2.2. Theory of PFG NMR CHAPTER 3. Applicability and potential of IRM • Publication 3.1. Anomaly in the chain length dependence of n-alkane diffusion in ZIF 4 metal-organic frameworks • Publication 3.2. Metal-organic framework Co-MOF-74-based host-guest composites for resistive gas sensing • Publication 3.3. Revealing the transient concentration of CO2 in a mixed-matrix membrane by IR microimaging and molecular modeling • Publication 3.4. IR microimaging of direction-dependent uptake in MFI-type crystals CHAPTER 4. Importance of PFG NMR in diffusion studies • Publication 4.1. NMR diffusometry with guest molecules in nanoporous materials • Publication 4.2. Structural characterisation of hierarchically porous silica monolith by NMR cryo-porometry and -diffusometry CHAPTER 5. Complementary benefits of IR microimaging and PFG NMR • Publication 5.1. Diffusion in nanopores: correlating experimental findings with 'first-principles' predictions • Publication 5.2. Diffusion analysis in pore hierarchies by the two-region model Bibliography Appendix A. Supporting information Appendix B. Author contributions

Pulsed field gradient (PFG) 1H NMR was used to characterize the mobility of ionic liquid cations in porous gas diffusion electrode (GDE) frameworks for metal–air electrochemical systems. The carbon GDE frameworks were produced by electrospinning. It was found that the motion of ionic liquids in the highly porous hosts is more complex than what is commonly exhibited by conventional fluids, which makes a multimodal investigation essential for an adequate description of mobility and wetting of GDEs. Observed NMR diffraction-like patterns cannot be linked to the tortuosity limit but may serve as a proxy for structural features in the fibrous material. While the observed data were interpreted using standard theoretical models, alternative explanations and causes for artifacts are discussed.

Electric field gradient focusing (EFGF) utilizes a hydrodynamic flow and an electric field gradient to focus and concentrate charged analytes and order them in a separation channel according to electrophoretic mobility. Elution can be achieved by decreasing the applied voltage or increasing the hydrodynamic flow. EFGF has the advantages of concentrating a large volume (100 micro-L) of target proteins without significant band broadening and simultaneously removing unwanted components from the sample. Two types of EFGF devices have been investigated to concentrate and separate proteins: a fiber-based EFGF device and a hydrogel-based EFGF device. Using fiber-based EFGF with UV detection, a concentration factor as high as 15,000 and a concentration limit of detection as low as 30 pM were achieved using bovine serum albumin as a model protein. I also demonstrated the potential of using fiber-based EFGF for quantitative protein analysis. Simultaneous desalting and protein concentration as well as online concentration of ferritin and simultaneous removal of albumin from a sample matrix were also performed using this fiber-based EFGF system. In the approach of utilizing hydrogel-based EFGF, online concentration of amyloglucosidase indicated a concentration limit of detection of approximately 20 ng/mL (200 pM) from a sample volume of 100 micro-L. Both voltage-controlled and flow-controlled elution methods were demonstrated using a 3-component protein mixture. Concentration of human α1-acid glycoprotein with simultaneous removal of human serum albumin was also described. A tandem EFGF system, which integrates fiber-based and hydrogel-based EFGF sections, was also investigated to selectively concentrate and separate proteins in a mixture. By carefully controlling the voltages applied to both sections, charged analytes with high mobilities were trapped in the fiber-based section, analytes with intermediate mobilities in the hydrogel-based section, and analytes with low mobilities not at all. A 3-way switching valve was incorporated in the system to purge the analytes with high mobilities periodically. Selective concentration and separation of myoglobin from a mixture were performed using the tandem EFGF system. Based on the experimental results described in this dissertation, EFGF shows potential for selective isolation, concentration, and quantitation of trace analytes such as proteins in biomedical samples.

The results of a systematic 35Cl, 81Br, and 127I SSNMR spectroscopic study of a series of halogen-substituted anilinium halide salts are presented. Solid-state NMR of these nuclides, bromine-/81 and iodine-127 in particular, is not well established. Twenty-one compounds thought to exhibit halogen bonding were prepared based on modified literature procedures, and two crystal structures were solved. Experiments show that collection of SSNMR spectra of the anions is feasible, though ultrahigh magnetic fields (21.1 T) and variable offset data acquisition were found to be essential. Electric field gradient and chemical shift tensors are measured experimentally for all 21 compounds, significantly expanding the body of data for the quadrupolar halogen nuclei. Quadrupolar coupling constants for chlorine-35 ranged from 2.12 to 6.04 MHz, for bromine-81 from 12.3 to 45.3 MHz, and for iodine-127 from 57.50 to 152.50 MHz. Gauge-including projector-augmented wave density functional theory (GIPAW-DFT) calculations were used to provide insight as to how the NMR parameters vary with local environment and long-range crystal packing. Overall, calculations reproduced the experimental trends in quadrupolar coupling constants and chemical shift tensor span (Ω) but failed to provide quantitative agreement within experimental error. Experimental and computational data were analyzed in order to provide insight into how halogen bonding influences NMR parameters. Several trends were elucidated from this study, including an inverse correlation between Ω and the length of the shortest halogen-halide contact (d). In selected bromine compounds, for example, Ω (81Br) was measured to increase from 120 to 240 ppm as d decreased from 3.838 to 3.443 Å. In summary, this study has demonstrated the feasibility and utility of quadrupolar halogen SSNMR, and that these techniques may prove useful in characterizing halogen bonding interactions in solids.

The results of a systematic 35Cl, 81Br, and 127I SSNMR spectroscopic study of a series of halogen-substituted anilinium halide salts are presented. Solid-state NMR of these nuclides, bromine-/81 and iodine-127 in particular, is not well established. Twenty-one compounds thought to exhibit halogen bonding were prepared based on modified literature procedures, and two crystal structures were solved. Experiments show that collection of SSNMR spectra of the anions is feasible, though ultrahigh magnetic fields (21.1 T) and variable offset data acquisition were found to be essential. Electric field gradient and chemical shift tensors are measured experimentally for all 21 compounds, significantly expanding the body of data for the quadrupolar halogen nuclei. Quadrupolar coupling constants for chlorine-35 ranged from 2.12 to 6.04 MHz, for bromine-81 from 12.3 to 45.3 MHz, and for iodine-127 from 57.50 to 152.50 MHz. Gauge-including projector-augmented wave density functional theory (GIPAW-DFT) calculations were used to provide insight as to how the NMR parameters vary with local environment and long-range crystal packing. Overall, calculations reproduced the experimental trends in quadrupolar coupling constants and chemical shift tensor span (Ω) but failed to provide quantitative agreement within experimental error. Experimental and computational data were analyzed in order to provide insight into how halogen bonding influences NMR parameters. Several trends were elucidated from this study, including an inverse correlation between Ω and the length of the shortest halogen-halide contact (d). In selected bromine compounds, for example, Ω (81Br) was measured to increase from 120 to 240 ppm as d decreased from 3.838 to 3.443 Å. In summary, this study has demonstrated the feasibility and utility of quadrupolar halogen SSNMR, and that these techniques may prove useful in characterizing halogen bonding interactions in solids.

As part of this project and in preparation for future experimental studies of gas-phase ion-molecule reactions, extensive modification and characterization of the crossed molecular beam machine in the Department of Chemistry, University of Canterbury has been carried out. This instrument has been configured and some preliminary testing completed to enable the future study of gas-phase ion-molecule collisions of H⁺₃ and Y⁻ (Y = F, Cl, Br) with dipole-oriented CZ₃X (Z = H, F and X = F, Cl, Br). Theoretical calculations (ab initio and density functional theory) are reported on previously experimentally characterized Na + CH₃NO₂, Na + CH₃NC, and K + CH₃NC systems, and several other systems of relevance. All gas-phase experimental and theoretical studies have the common theme of studying collision orientation dependence of reaction under singlecollision conditions. Experimental measurements, theoretical simulations and calculations are also reported on some selected ferrous (Fe²⁺) high-spin (S=2) crystals, in an attempt to resolve microscopic contributions of two fundamental macroscopic tensor properties: the electric-field gradient (efg); and the mean square displacement (msd) in the case when more than one symmetry related site of low local point-group symmetry contributes to the same quadrupole doublet. These determinations have been made using the nuclear spectroscopic technique of Mössbauer spectroscopy, and complemented with X-ray crystallographic measurements.

The pulsed field gradient fourier transform nuclear magnetic resonance (PFG-FTNMR) method to measure translational diffusion coefficients in multicomponent systems has been applied to amphiphilic molecules forming liquid crystalline phases. By analyzing the concentration dependence of the diffusion coefficients of water and amphiphile in a micellar system of N,N-dimethyldodecy lamine oxide (DDAO) in water it was possible to conclude that the micelles formed were polydisperse in size and shape. It was also shown that solubilization of small amounts of hydrophobic molecules into the micelles induces spherical micelles of a narrow size distribution. From the magnitude of the lateral diffusion coefficient in the cubic phase of DDAO/water it was concluded that this phase is built up of bicontinous aggregates. The lipid lateral diffusion in the cubic phase of monooleoylglycerol (MO)/water has been measured. The decrease in the lateral diffusion of MO in this phase, when the water was replaced by glycerol, was ascribed to changes in viscosity in the polar region. Measurements by electron spin resonance and time-resolved fluorescence spectroscopy showed that changes in viscosity of the solvent also affected the motions in the hydrocarbon region. The diffusion coefficients of all three components in the cubic phase located in the lowwater region of the ternary system of diacylglycerol (DAG)/soybean phosphatidylcholine (SPC)/water have been determined. Conclusive evidence was provided for that this cubic phase is built up of reversed micelles containing mainly SPC in a continous matrix of mainly DAG. The effect on the phase properties of DDAO upon incorporation of the peptide gramicidin D has been investigated. It was shown that gramicidin D induces a lamellar phase at all water contents. The change in the order parameter profile of the C-2H bonds in perdeuterated DDAO upon incorporation of gramicidin D is compatible with theoretical calculations for proteins exhibiting a positive hydrophobic mismatch. A method for using the PFG FTNMR technique in measurements of the transmembrane exchange rate of small molecules in vesicular suspensions is discussed and some preliminary data is shown. / <p>Diss. (sammanfattning) Umeå : Umeå universitet, 1994, härtill 4 uppsatser</p> / digitalisering@umu

The results of a systematic 35Cl, 81Br, and 127I SSNMR spectroscopic study of a series of halogen-substituted anilinium halide salts are presented. Solid-state NMR of these nuclides, bromine-/81 and iodine-127 in particular, is not well established. Twenty-one compounds thought to exhibit halogen bonding were prepared based on modified literature procedures, and two crystal structures were solved. Experiments show that collection of SSNMR spectra of the anions is feasible, though ultrahigh magnetic fields (21.1 T) and variable offset data acquisition were found to be essential. Electric field gradient and chemical shift tensors are measured experimentally for all 21 compounds, significantly expanding the body of data for the quadrupolar halogen nuclei. Quadrupolar coupling constants for chlorine-35 ranged from 2.12 to 6.04 MHz, for bromine-81 from 12.3 to 45.3 MHz, and for iodine-127 from 57.50 to 152.50 MHz. Gauge-including projector-augmented wave density functional theory (GIPAW-DFT) calculations were used to provide insight as to how the NMR parameters vary with local environment and long-range crystal packing. Overall, calculations reproduced the experimental trends in quadrupolar coupling constants and chemical shift tensor span (Ω) but failed to provide quantitative agreement within experimental error. Experimental and computational data were analyzed in order to provide insight into how halogen bonding influences NMR parameters. Several trends were elucidated from this study, including an inverse correlation between Ω and the length of the shortest halogen-halide contact (d). In selected bromine compounds, for example, Ω (81Br) was measured to increase from 120 to 240 ppm as d decreased from 3.838 to 3.443 Å. In summary, this study has demonstrated the feasibility and utility of quadrupolar halogen SSNMR, and that these techniques may prove useful in characterizing halogen bonding interactions in solids.

The results of a systematic 35Cl, 81Br, and 127I SSNMR spectroscopic study of a series of halogen-substituted anilinium halide salts are presented. Solid-state NMR of these nuclides, bromine-/81 and iodine-127 in particular, is not well established. Twenty-one compounds thought to exhibit halogen bonding were prepared based on modified literature procedures, and two crystal structures were solved. Experiments show that collection of SSNMR spectra of the anions is feasible, though ultrahigh magnetic fields (21.1 T) and variable offset data acquisition were found to be essential. Electric field gradient and chemical shift tensors are measured experimentally for all 21 compounds, significantly expanding the body of data for the quadrupolar halogen nuclei. Quadrupolar coupling constants for chlorine-35 ranged from 2.12 to 6.04 MHz, for bromine-81 from 12.3 to 45.3 MHz, and for iodine-127 from 57.50 to 152.50 MHz. Gauge-including projector-augmented wave density functional theory (GIPAW-DFT) calculations were used to provide insight as to how the NMR parameters vary with local environment and long-range crystal packing. Overall, calculations reproduced the experimental trends in quadrupolar coupling constants and chemical shift tensor span (Ω) but failed to provide quantitative agreement within experimental error. Experimental and computational data were analyzed in order to provide insight into how halogen bonding influences NMR parameters. Several trends were elucidated from this study, including an inverse correlation between Ω and the length of the shortest halogen-halide contact (d). In selected bromine compounds, for example, Ω (81Br) was measured to increase from 120 to 240 ppm as d decreased from 3.838 to 3.443 Å. In summary, this study has demonstrated the feasibility and utility of quadrupolar halogen SSNMR, and that these techniques may prove useful in characterizing halogen bonding interactions in solids.