Furthering our understanding of the physics of flapping flight has the potential to benefit the field of micro air vehicles. Advancements in micro air vehicles can benefit applications such as surveillance, reconnaissance, and search and rescue. In this research, flapping kinematics of a ladybug was explored using a direct linear transformation. A flapping mechanism design is presented that was capable of executing ladybug or other species-specific kinematics. The mechanism was based on a differential gear design, had two wings, and could flap in harsh environments. This mechanism served as a test bed for force analysis and optimization studies. The first study was based on a Box-Behnken screening design to explore wing kinematic parameter design space and manually search in the direction of flapping kinematics that optimized the objective of maximum combined lift and thrust. The second study used a Box-Behnken screening design to build a response surface. Using gradient-based techniques, this surface was optimized for maximum combined lift and thrust. Box-Behnken design coupled with response surface methodology was an efficient method for exploring the mechanism force response. Both methods for optimization were capable of successfully improving lift and thrust force outputs. The incorporation of the results of these studies will aid in the design of more efficient micro air vehicles and with the ultimate goal of leading to a better understanding of flapping wing aerodynamics and the development of aerodynamic models.

Flapping flight shows promise for micro air vehicle design because flapping wings provide superior aerodynamic performance than that of fixed wings and rotors at low Reynolds numbers. In these flight regimes, unsteady effects become increasingly important. This thesis explores some of the unsteady effects that provide additional lift to flapping wings through an experiment-based optimization of the kinematics of a flapping wing mechanism in a water tunnel. The mechanism wings and flow environment were scaled to simulate the flight of the hawkmoth (Manduca sexta) at hovering or near-hovering speeds. The optimization was repeated using rigid and flexible wings to evaluate the impact that wing flexibility has on aerodynamic performance of flapping wings. The trajectories that produced the highest lift were compared using particle image velocimetry to characterize the flow features produced during the periods of peak lift. A leading edge vortex was observed with all of the flapping trajectories and both wing types, the strength of which corresponded to the measured amount of lift of the wing. This research furthers our understanding of the lift-generating mechanisms used in nature and can be applied to improve the design of micro air vehicles.

Though still in relative infancy, the field of flapping flight has potential to have a far-reaching impact on human life. Nature presents a myriad of examples of successful uses of this locomotion. Human efforts in flapping flight have seen substantial improvement in recent times. Wing kinematics are a key aspect of this study. This study summarizes previous wing trajectory generators and presents a new trajectory generation method built upon previous methods. This includes a novel means of commanding unequal half-stroke durations subject to robotic trajectory continuity requirements. Additionally, previous optimization methods are improved upon. Experimental optimization is performed using the new trajectory generation method and a more traditional means. Methods for quantifying and compensating for sensor time-dependence are also discussed. Results show that the Polar Fourier Series trajectory generator advanced rapidly through the optimization process, especially during the initial phase of experimentation. The Modified Berman and Wang trajectory generator moved through the design space more slowly due to the increased number of kinematic parameters. When optimizing lift only, the trajectory generators produced similar results and kinematic forms. The findings suggest that the objective statement should be modified to reward efficiency while maintaining a certain amount of lift. It is expected that the difference between the capabilities of the two trajectory generators will become more apparent under such conditions.

As the understanding of the workings of the biological world expands, biomimetic designs increasingly move into the focus of engineering research studies. For this thesis, two studiesinvolving leading edge vortex generation for lift production as observed in nature were explored intheir respective flow regimes. The first study focused on the steady state analysis of streamwise vortices generated byleading edge tubercles of an adult humpback whale flipper. A realistic scaled model of a humpbackflipper was fabricated based on the 3D reconstruction from a sequence of 18 images taken whilecircumscribing an excised flipper of a beached humpback whale. Two complementary modelswith smooth leading edges were transformed from this original digitized model and fabricatedfor testing to further understand the effect of the leading edge tubercles. Experimentally-obtainedforce and qualitative flow measurements were used to study the influence of the leading edgetubercles. The presence of leading edge tubercles are shown to decrease maximum lift coefficient(Cl ), but increase Cl production in the post-stall region. By evaluating a measure of hydrodynamicefficiency, humpback whale flipper geometry is shown to be more efficient in the pre-stall regionand less efficient in the post-stall region as compared to a comparable model with a smooth leadingedge. With respect to a humpback whale, if the decrease in efficiency during post-stall angles ofattack was only required during short periods of time (turning), then this decrease in efficiencymay not have a significant impact on the lift production and energy needs. For the pursuit ofbiomimetic designs, this decrease in efficiency could have potential significance and should beinvestigated further. Qualitative flow measurements further demonstrate that these force results aredue to a delay of separation resulting from the presence of tubercles.The second study investigated explored the effects of flapping frequency on the passive flowcontrol of a flapping wing with a sinusoidal leading edge profile. At a flapping frequency of f =0.05 Hz, an alternating streamwise vortical formation was observed for the sinusoidal leading edge,while a single pair of vortices were present for the straight leading edge. A sinusoidal leading edgecan be used to minimize spanwise flow by the generation of the observed alternating streamwisevortices. An increase in flapping frequency results in these streamwise vortices becoming stretchedin the path of the wing. The streamwise vortices are shown to minimize spanwise flow even afterbeing stretched. Once instabilities are formed at f ≥ 0:1 Hz due to velocity shearing generatedby the increase in cross-radial velocity, the alternating streamwise vortices begin to break downresulting in a increase of spanwise flow.

A flapping-wing micro-air-vehicle (FWMAV) represents a complex multi-disciplinary system whose analysis invokes the frontiers of the aerospace engineering disciplines. From the aerodynamic point of view, a nonlinear, unsteady flow is created by the flapping motion. In addition, non-conventional contributors, such as the leading edge vortex, to the aerodynamic loads become dominant in flight. On the other hand, the flight dynamics of a FWMAV constitutes a nonlinear, non-autonomous dynamical system. Furthermore, the stringent weight and size constraints that are always imposed on FWMAVs invoke design with minimal actuation. In addition to the numerous motivating applications, all these features of FWMAVs make it an interesting research point for engineers. In this Dissertation, some challenging points related to FWMAVs are considered. First, an analytical unsteady aerodynamic model that accounts for the leading edge vortex contribution by a feasible computational burden is developed to enable sensitivity and optimization analyses, flight dynamics analysis, and control synthesis. Second, wing kinematics optimization is considered for both aerodynamic performance and maneuverability. For each case, an infinite-dimensional optimization problem is formulated using the calculus of variations to relax any unnecessary constraints induced by approximating the problem as a finite-dimensional one. As such, theoretical upper bounds for the aerodynamic performance and maneuverability are obtained. Third, a design methodology for the actuation mechanism is developed. The proposed actuation mechanism is able to provide the required kinematics for both of hovering and forward flight using only one actuator. This is achieved by exploiting the nonlinearities of the wing dynamics to induce the saturation phenomenon to transfer energy from one mode to another. Fourth, the nonlinear, time-periodic flight dynamics of FWMAVs is analyzed using direct and higher-order averaging. The region of applicability of direct averaging is determined and the effects of the aerodynamic-induced parametric excitation are assessed. Finally, tools combining geometric control theory and averaging are used to derive analytic expressions for the textit{Symmetric Products}, which are vector fields that directly affect the acceleration of the averaged dynamics. A design optimization problem is then formulated to bring the maneuverability index/criterion early in the design process to maximize the FWMAV maneuverability near hover. / Ph. D.

No description available.

The unsteady aerodynamic and aeroelastic analysis of flapping flight under various kinematics and flow parameters is presented in this dissertation. The main motivation for this study arises from the challenges facing the development of micro air vehicles. Micro air vehicles by requirement are compact with dimensions less than 15-20 cm and flight speeds of around 10-15 m/s. These vehicles operate in low Reynolds number range of 10,000 to 100,000. At these low Reynolds numbers, the aerodynamic efficiency of conventional fixed airfoils significantly deteriorates. On the other hand, flapping flight employed by birds and insects whose flight regime coincides with that of micro air vehicles offers a viable alternate solution. For the analysis of flapping flight, a boundary fitted moving grid algorithm is implemented in a flow solver, GenIDLEST. The dynamic movement of the grid is achieved using a combination of spring analogy and trans-finite interpolation on displacements. The additional conservation equation of space required for moving grid is satisfied. The solver is validated with well known flow problems such as forced oscillation of a cylinder, a heaving airfoil, a moving indentation channel, and a hovering fruitfly. The performance of flapping flight is analyzed using Large Eddy Simulation (LES) for a wide range of Reynolds numbers and under various kinematic parameters. A spiral Leading Edge Vortex (LEV) forms during the downstroke due to the high angle of attack, which results in high force production. A strong spanwise flow of the order of the flapping velocity is observed along the core of the LEV. In addition, the formation of a negative spanwise flow is observed due to the tip vortex, which slows down the removal of vorticity from the LEV. This leads to the instability of the LEV at around mid-downstroke. Analysis with different rotation kinematics shows that a continuous rotation results in better propulsive efficiency as it generates thrust during the entire flapping cycle. Analysis with different angles of attack shows that a moderate angle of attack which results in complete shedding of the LEV offers high propulsive efficiency. The analysis of flapping flight at Reynolds numbers ranging from 100 to 100,000 shows that higher lift and thrust values are obtained for Re?100. The critical reasons are that at higher Reynolds numbers, the LEV is closer to the surface and as it sheds and convects it covers most of the upper surface. However, the Reynolds number has no or little effect on the lift and thrust as identical values are obtained for Re=10,000 and 100,000. The analysis with different tip shapes shows that tip shapes do not have a significant effect on the performance. Introduction of stroke deviation to kinematics leads to drop in average lift as wing interacts with the LEV shed during the downstroke. A linear elastic membrane model with applied aerodynamic load is developed for aeroelastic analysis. Analysis with different wing stiffnesses shows that the membrane wing outperforms the rigid wing in terms of lift, thrust and propulsive efficiency. The main reason for the increase in force production is attributed to the gliding of the LEV along the camber, which results in a high pressure difference across the surface. In addition, a high stiffness along the spanwise direction and low stiffness along the chordwise direction results in a uniform camber and high lift and thrust production. / Ph. D.