Global ETD Search

301	Neue Einsatzpotentiale naturfaserbasierter Materialien in der Konsumgüterproduktion durch die technologische Entwicklung des Ziehverfahrens am Beispiel der Verpackung / New application potential of biofibre-based materials in the production of consumer goods by technological development of the deep drawing process on the example of packaging Hauptmann, Marek 11 July 2017 (has links) Die Produktion verschiedener Arten von Gütern ist im globalen Kontext gesellschaftlicher Entwicklung fortwährend an die Verfügbarkeit von Ressourcen gebunden und durch diese zunehmend begrenzt. In den bis heute entstandenen Wertschöpfungsketten basiert die verlustarme und effiziente Verteilung von Produkten, Zwischenprodukten, Halbzeugen sowie auch Rohstoffen auf den spezifisch auf die jeweiligen Erfordernisse eingestellten Funktionen ihrer Verpackungen. Als Bindeglied in nahezu allen Teilen der Produktion werden die Verpackung und ihre Herstellung innerhalb des mit Abstand größten Teils ihrer Anwendung, den Konsumgüterverpackungen als Beispiel für die Diskussion von Einsatzpotentialen naturfaserbasierter Materialien verwendet. Die Habilitationsschrift stellt die Ausgangssituation in der weltweiten Konsumgüterproduktion und Ressourcenverfügbarkeit dar und ordnet die Position naturfaserbasierter Packmittel in diese ein. Es werden Technologien zur Formgebung naturfaserbasierter Materialien zu Packmitteln zusammenfassend dargestellt. Die Ziehtechnik wird im Speziellen in Form eines Leitfadens in ihren Wirkmechanismen und Prozessvarianten sowie in Bezug auf ihre technische Umsetzung dargestellt. Es werden Beispiele konkreter Anwendungsmöglichkeiten diskutiert. Ziehen Tiefziehen Papier Karton Naturfaser 3D-Umformen Verpackung Packmittel Konsumgüter 3D-forming deep drawing fibre-based packaging paperboard consumer good forming moulding mould ddc:620 rvk:ZM 8224
302	Neue Einsatzpotentiale naturfaserbasierter Materialien in der Konsumgüterproduktion durch die technologische Entwicklung des Ziehverfahrens am Beispiel der Verpackung / New application potential of biofibre-based materials in the production of consumer goods by technological development of the deep drawing process on the example of packaging Hauptmann, Marek 23 August 2017 (has links) (PDF) Die Produktion verschiedener Arten von Gütern ist im globalen Kontext gesellschaftlicher Entwicklung fortwährend an die Verfügbarkeit von Ressourcen gebunden und durch diese zunehmend begrenzt. In den bis heute entstandenen Wertschöpfungsketten basiert die verlustarme und effiziente Verteilung von Produkten, Zwischenprodukten, Halbzeugen sowie auch Rohstoffen auf den spezifisch auf die jeweiligen Erfordernisse eingestellten Funktionen ihrer Verpackungen. Als Bindeglied in nahezu allen Teilen der Produktion werden die Verpackung und ihre Herstellung innerhalb des mit Abstand größten Teils ihrer Anwendung, den Konsumgüterverpackungen als Beispiel für die Diskussion von Einsatzpotentialen naturfaserbasierter Materialien verwendet. Die Habilitationsschrift stellt die Ausgangssituation in der weltweiten Konsumgüterproduktion und Ressourcenverfügbarkeit dar und ordnet die Position naturfaserbasierter Packmittel in diese ein. Es werden Technologien zur Formgebung naturfaserbasierter Materialien zu Packmitteln zusammenfassend dargestellt. Die Ziehtechnik wird im Speziellen in Form eines Leitfadens in ihren Wirkmechanismen und Prozessvarianten sowie in Bezug auf ihre technische Umsetzung dargestellt. Es werden Beispiele konkreter Anwendungsmöglichkeiten diskutiert. Ziehen Tiefziehen Papier Karton Naturfaser 3D-Umformen Verpackung Packmittel Konsumgüter 3D-forming deep drawing fibre-based packaging paperboard consumer good forming moulding mould ddc:620 rvk:ZM 8224
303	Development Of Liquid Phase Co-Spray Forming And Its Application To AI-Si-Pb Alloys Fuxiao, Yu 09 1900 (has links) (PDF) No description available. Al-Si-Pb Alloys Al-Si-Pb Alloys - Spraying Coatings Process Spraying Spray Forming Leaded Aluminium Alloys Al-Si Alloys Co-Spray Forming Metallurgy
304	Návrh výroby kotvícího prvku solárního kolektoru / Manufacturing of the anchoring element of a solar collector Svobodová, Helena January 2017 (has links) In this master's thesis the proposal of the production technology of component – solar collector anchor element from steel 1.0038 (11 375) quality, 5 mm thickness is solved. For the manufacturing of the assigned part the shearing and bending technology and a progressive forming tool including a suitable forming machine of 8,000 kN rated power is selected. The proposed method of production is laid down by a technical-economic evaluation with respect to the production series of 150,000 units per year. The solar collector anchor element serves to hold the frame for the solar vacuum tube collector. In the scope of this master's thesis, an assessment of the current production method, including the selection of a suitable semi-finished product for production, was also carried out and their optimization was proposed.
305	Využití hydroformingu při vytváření strukturovaného povrchu solárního panelu / Utilization of Hydroforming Technology to Create a Structured Surface of Solar Panel Řiháček, Jan January 2017 (has links) The doctoral thesis deals with utilization of hydroforming technology for manufacturing of a new type of solar absorber, which has directly flow meandering structure and a structured surface consisting of pyramidal elements. Austenitic stainless steel X5CrNi18-10 is used as a material for absorbers production. At the beginning of the thesis, a literary research is performed, which is focused on particular methods of hydroforming technology, their applicability for this problem, forming limits determination and usability of numerical simulation. Based on the literature study, the production technology was developed by using parallel hydroforming technology and it was optimized by using a numerical simulation in the ANSYS software. Hydroforming parameters for two variants of the structured surface with pyramidal cavities with apex angle of 90° and 60° were determined from the calculations and the material tests.
306	Návrh výrobní technologie vakuové lisovací formy / Production technology for a vacuum mold Ponka, Ondřej January 2018 (has links) The master thesis deals with the design and production of the mold for vacuum forming. Specifically, how the existing and new mold materials affect their design and, consequently, their production technology. The thesis contains a brief description of the principle of vacuum molding. Technological and design principles of designing molds. Furthermore, the realization of the solution variants and the simulation of their production. The solved variants are subsequently evaluated from a technical and economic point of view.
307	Tváření hliníkových slitin při stárnutí / Age forming of aluminium alloys Stanislav, Filip January 2019 (has links) The diploma thesis is focused on the description and the verification of a relatively young creep age forming method. This method is based on a relaxation of stress and a creep of material, which occur by forming a part in the clamping tool during the artificial precipitation heat treatment at elevated temperature. After removing from the tool, the spring back and the residual stresses in the part are smaller compared to the conventional forming methods. This is mainly reflected in the increased fatigue resistance of the structure. The creep aging is only applicable to the precipitation heat treatable alloys. This thesis is focused on aluminium alloys, which are typical for the aerospace industry. The first part of the thesis describes principles of technology, its use in the aviation and material processes in the aluminium precipitation heat treatable alloys during the creep age forming. In the second part, there is a methodology of the verification of technology on samples made of the aluminium alloys ČSN EN AL-P 7075 and ČSN 424203 (approximate equivalent of ČSN EN AL-P 2024). Furthermore, a forming tool is designed, and experiments are performed according to the proposed methodology. At the end of the thesis, the experiments are evaluated and changes in the spring back of the samples are compared for three different methods of forming: the conventional cold clamping forming, the creep age forming and the creep age forming with an overaging.
308	Výroba součásti "KRYT" plošným tvářením / Production single parts "COVER" from sheet metal Vítek, Roman January 2010 (has links) The Master’s thesis written in the frame of studies branch Manufacturing Technology (2303T002) is submitting design of technology production of sheet metal cover. The part is made of sheet metal 1,5 mm thick. The material for the part is HC260LA (ZStE260). There are no special mechanical or dimensional accuracy demands for the part. According to production run (5 000 pcs. per year for 5 years), design complexity and machine accessories of submitter was proposed manufacturing the part by drawing technology with finish laser cutting. Forming tool is designed according with press Erfurt PKZZ 315. Thesis includes economical evaluation of elaborated technology with other variants of production.
309	Výroba součásti "Kroužek" plošným tvářením / Production single parts "Ring" from sheet metal Stejskal, Luboš January 2012 (has links) This thesis elaborated within a master degree in 23-03-T002 line, introduces a suggestion of production technology of part „Ring“ by sheet metal forming out of deep-drawing steel W.Nr. 1.0338. Supposed production amount is 250 000 pieces per year. Based on a literary study of problematic of sheet forming for this required part regarding production series, technologies of this of deep drawing and cutting were chosen. According to performed technological calculations, a production process of seven operations was designed. A sequence automatic machine Paust 40 (VVB WMW), was cousin for this suggested process. This machine is particularly appointed for big series and wholesale production of impressions of sheet metal. It is equipped with mechanization and therefore creates a fully automatic line. A tool was designed for this chosen type of machine. Project includes economical evaluations of elaborated of production technology.
310	Výroba kotevního prvku / Manufacturing of wall clamp Šobáň, Pavel January 2014 (has links) The wall clamp is used for attaching columns or pillars to a concrete foundation. It is made from structural steel 11 375 in the form of sheets with a thickness of 4 mm in the production run of 150 000 pcs/year. A combination of shearing and bending technologies in a progressive forming tool was selected from various options as the most appropriate. On the basis of structural and technological calculations, an instrument was designed, for which the technical documentation was elaborated. Due to the total forming force and work, the forming machine LDO 800 A/S from Šmeral Brno a.s. was selected as the manufacturing machine. The production cost per one part 53.66 CZK was determined using economic evaluation; based on the break even point, the production becomes profitable for the production run with the minimum number of 13 065 pcs.

Search results