No description available.

<p>In this thesis work, two new CO₂-responsive monomers have been synthesized. These amidine-containing monomers were prepared in a simple and effective one-step reaction, giving a very high yield (98.5 %) of product. Furthermore, there was no complicated further purification required to obtain the highly pure product. The CO₂ switchability, conductivity and partitioning of the monomers were measured. It was confirmed that the monomers could be protonated CO₂ in the present of trace amount of water and reversibly switched back and forth to their natural forms by N₂ at room temperature.</p> <p>The polymers having different molecular weights were prepared from one monomer via conventional free radical polymerization method. The polymers also showed the reversible switchability property with CO₂ and N₂ stimuli. This was confirmed by the results of conductivity and partitioning tests. Temperature showed a major influence on the conductivity of the monomer and polymers. The effect of molecular weight on the polymer switchability of was further investigated through conductivity tests and potentiometric titration. The conductivity decreased with the increased molecular weight. The apparent equilibrium constant (pK_a)decreased with the degree of protonation (δ) suggesting that the basicity of the polymers is strongly depended on the value of δ.</p> / Master of Applied Science (MASc)

Dimethacrylate monomers containing two cleavable tert-butyl ester groups were synthesized and utilized in the synthesis of star-shaped polymers. Star polymer coupling was achieved by reacting the living poly(alkyl methacrylate) using 2,5-dimethyl-2,5-hexanediol dimethacrylate (DHDMA) or dicumyl dimethacrylate (DCDMA). These starshaped polymers were cleaved under hydrolytic conditions, leading to significant reductions in molecular weights. The cleavable star-shaped polymers also underwent uncatalyzed degradation at elevated temperatures. Pressure-sensitive adhesive (PSA) copolymers based on 2-ethylhexyl acrylate (EHA) were synthesized containing cleavable branching comprised of either DHDMA or DCDMA. Extremely high molecular weight branched polymers were obtained, and these branched adhesives exhibited 180° peel strengths that displayed a strong dependence on the weight-average molecular weights. The PSA branching sites were cleaved via acid-catalyzed hydrolysis, drastically lowering the 1180° peel strengths of the cleaved linear polymers between 75 and 95 percent. Branched poly (EHA) PSAs containing 2-hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EGDMA), as well as poly(EHA-co-HEMA), were synthesized and modified with photoactive functional groups. Cinnamate functionalized PSAs underwent photocrosslinking under UV light, leading to significant losses in 180° peel strengths. The acrylate functionalized PSAs were mixed with a photoinitiator, and following crosslinking under visible light, these PSAs exhibited excellent deactivation characteristics. Poly(methyl methacrylate) containing aliphatic diols were synthesized via anionic polymerization utilizing the novel protected functional co-initiator 1,1-bis-, 4'-(2-(tertbutyldimethylsilyloxy) ethoxy)phenylethylene (BTOPE). Following the coupling of BTOPE with sec-butyl lithium, methyl methacrylate was polymerized in living fashion at -78 °C in THF. A broad molecular weight range of BTOPE-initiated PMMA samples were synthesized, and molecular weight distributions were as low as 1.03 were observed. Hydrolytic deprotection of the protecting groups resulted in α,α-dihydroxy PMMA. The graft macromonomers poly(tert-butyl styrene-block-styrene) methacrylate and poly(styrene-block-tert-butyl styrene) methacrylate were synthesized from the corresponding diblock copolymer alcohols utilizing acid chloride chemistry. Excellent molecular weight control, narrow molecular weight distributions, and perfect crossover were observed in both types of diblock polymers. The macromonomers were copolymerized with methyl methacrylate via solution free-radical copolymerization. The styrene blocks in the purified graft copolymers were selectively sulfonated using acetyl sulfate. / Ph. D.

High molecular weight star-shaped polystyrenes were prepared via the coupling of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) terminated polystyrene oligomers with divinylbenzene (DVB) in m-xylene at 138 °C. Linear polystyrene oligomers (Mn = 19,300 g/mol, Mw/Mn = 1.10) were synthesized in bulk styrene using benzoyl peroxide in the presence of TEMPO at approximately 130 °C. In situ mid-infrared spectroscopy was successfully utilized to follow initiation, monomer conversion, and polymer formation. Real-time data allowed for the determination of apparent rate constants of 2.1E-5 s⁻¹ at 132 °C and 1.2E-5 s⁻¹ at 126 °C from the profile of the decaying styrene vinyl carbon-hydrogen (=CH₂) absorbance at 907 cm⁻¹. Coupling of the TEMPO terminated oligomers under optimum conditions resulted in a compact and dense product with a number average molecular weight exceeding 300,000 g/mol (Mw/Mn = 3.03) after 24 h, suggesting the formation of relatively well-defined star-shaped polymers. Synthetic factors that affected the molecular weight, yield, and composition of maleic anhydride (MAH), norbornene (Nb), and tert-butyl 5-norbornene-2-carboxylate (NbTBE) terpolymers were investigated. Pseudo first order kinetic analysis using in situ FTIR indicated that the observed rate of reaction was a strong function of the Nb/NbTBE ratio with a maximum of 6.7E-5 s⁻¹ for a 50/0/50 Nb/NbTBE/MAH monomer ratio and a minimum of 1.1E-5 s⁻¹ for a 0/50/50 Nb/NbTBE/MAH ratio. Polymer yields were also observed to be a function of the Nb/NbTBE ratio and also decreased with increasing NbTBE. Calculated work of adhesion values (Wadh) values were observed to increase as the content of NbTBE was increased. 193 nm photoresist formulations incorporating polymers with high NbTBE content showed increased imaging performance using 193 nm light and successfully produced sharp and defined features as small as 110 nm, which was demonstrated via scanning electron microscopy (SEM). Additional functionality was introduced via the copolymerization of MAH with several norbornene (Nb) derivatives that were synthesized from facile Diels-Alder cycloaddition reactions of cyclopentadiene with a-olefins containing electron withdrawing groups. Subsequent hydrolysis of the anhydride offered further versatility and provided an avenue to introduce aqueous base solubility into Nb/MAH copolymers. / Ph. D.

An experimental and modelling investigation of a tetrafunctional initiator designed for free radical polymerizations is presented. Multifunctional initiators are believed to provide two advantages over traditional monofunctional initiators. With a higher number of functional sites per molecule, they are able to increase polymer production while simultaneously maintaining or increasing polymer molecular weight. Examination of the literature indicates the majority of academic and industrial published studies have investigated difunctional initiators with most focusing on styrene. In this thesis, a tetrafunctional initiator, JWEB50, was systematically investigated for a variety of monomer systems in order to develop a better understanding of the behaviour of multifunctional initiators in free radical polymerizations. <br /><br /> A kinetic study comparing the tetrafunctional initiator to a monofunctional counterpart, TBEC, demonstrated that the impact of a multifunctional initiator is dependent upon monomer type. Regardless of the homo- or copolymer system examined, it was observed that the tetrafunctional initiator could produce higher rates of polymerization due to the greater number of labile groups per initiator molecule. However, the influence of the tetrafunctional initiator on the polymer molecular weight was dictated by the polymerization characteristics of the system in question. In the case of styrene, the tetrafunctional initiator maintained similar molecular weights compared to the monofunctional initiator while for methyl methacrylate (MMA), switching from a mono- to a tetrafunctional initiator actually decreased the polymer molecular weight. Other monomers such as butyl acrylate and vinyl acetate and copolymers of MMA and styrene or alpha-methyl styrene were examined to study the effect of initiator functionality in free radical polymerizations. <br /><br /> Subsequent to the kinetic investigation, polystyrene and poly(methyl methacrylate) samples produced with the tetrafunctional initiator were characterized in detail in order to examine the effects of initiator functionality on polymer properties. Samples generated with the monofunctional initiator were used for comparison purposes. Chromatographic and dilute solution methods were able to detect significant levels of branching in the polystyrene sample produced with JWEB50, while poly(methyl methacrylate) samples showed no evidence of branching. Rheological tests involving a combination of oscillatory and creep shear measurements were completed in order to detect differences between samples. The presence of branching using rheological techniques was clearly observed for both polystyrene and poly(methyl methacrylate) samples produced with the tetrafunctional initiator. <br /><br /> In order to explain the experimental results observed in the kinetic and polymer properties studies, a reaction mechanism for polymerizations initiated with a tetrafunctional initiator was proposed and used in the development of a mathematical model. Reactions involving the fate/efficiency of functional groups are properly accounted for, while in the past this had been ignored by modelling work in the literature. Based on model predictions, di-radical concentrations were estimated to be several orders of magnitude smaller than mono-radical concentrations and their contribution in the reaction mechanism was found to be negligible. Modelling results also demonstrated that the concentration and chain length of various polymer structures (i. e. , linear, star or coupled stars) depend upon monomer type and reaction conditions.

An experimental and modelling investigation of a tetrafunctional initiator designed for free radical polymerizations is presented. Multifunctional initiators are believed to provide two advantages over traditional monofunctional initiators. With a higher number of functional sites per molecule, they are able to increase polymer production while simultaneously maintaining or increasing polymer molecular weight. Examination of the literature indicates the majority of academic and industrial published studies have investigated difunctional initiators with most focusing on styrene. In this thesis, a tetrafunctional initiator, JWEB50, was systematically investigated for a variety of monomer systems in order to develop a better understanding of the behaviour of multifunctional initiators in free radical polymerizations. <br /><br /> A kinetic study comparing the tetrafunctional initiator to a monofunctional counterpart, TBEC, demonstrated that the impact of a multifunctional initiator is dependent upon monomer type. Regardless of the homo- or copolymer system examined, it was observed that the tetrafunctional initiator could produce higher rates of polymerization due to the greater number of labile groups per initiator molecule. However, the influence of the tetrafunctional initiator on the polymer molecular weight was dictated by the polymerization characteristics of the system in question. In the case of styrene, the tetrafunctional initiator maintained similar molecular weights compared to the monofunctional initiator while for methyl methacrylate (MMA), switching from a mono- to a tetrafunctional initiator actually decreased the polymer molecular weight. Other monomers such as butyl acrylate and vinyl acetate and copolymers of MMA and styrene or alpha-methyl styrene were examined to study the effect of initiator functionality in free radical polymerizations. <br /><br /> Subsequent to the kinetic investigation, polystyrene and poly(methyl methacrylate) samples produced with the tetrafunctional initiator were characterized in detail in order to examine the effects of initiator functionality on polymer properties. Samples generated with the monofunctional initiator were used for comparison purposes. Chromatographic and dilute solution methods were able to detect significant levels of branching in the polystyrene sample produced with JWEB50, while poly(methyl methacrylate) samples showed no evidence of branching. Rheological tests involving a combination of oscillatory and creep shear measurements were completed in order to detect differences between samples. The presence of branching using rheological techniques was clearly observed for both polystyrene and poly(methyl methacrylate) samples produced with the tetrafunctional initiator. <br /><br /> In order to explain the experimental results observed in the kinetic and polymer properties studies, a reaction mechanism for polymerizations initiated with a tetrafunctional initiator was proposed and used in the development of a mathematical model. Reactions involving the fate/efficiency of functional groups are properly accounted for, while in the past this had been ignored by modelling work in the literature. Based on model predictions, di-radical concentrations were estimated to be several orders of magnitude smaller than mono-radical concentrations and their contribution in the reaction mechanism was found to be negligible. Modelling results also demonstrated that the concentration and chain length of various polymer structures (i. e. , linear, star or coupled stars) depend upon monomer type and reaction conditions.

In this study, ethyl methacrylate was polymerized by free radical polymerization at 600C, 700C, 800C at open atmosphere / atom transfer radical polymerization, (ATRP), at 800C in vacuum and in gamma irradiation in vacuum. The polymer obtained was white, hard material. The kinetic curves for free radical polymerization and ATRP by gamma radiation were S-type. However, the curve for polymerization by gamma irradiation raises more smoothly. For ATRP by thermal initiation gives a lineer change of conversion with time. It was observed that the molecular weight can be controlled and low molecular weight polymer could be obtained by ATRP method. The characterization of polymers were made by FTIR, DSC, 1H and 13C NMR techniques.

Polyorganosilany spadají do skupiny hybridních materiálů třídy II, které nabízejí nové možnosti materiálových funkcí a jejich vlastností. Ačkoliv byly v této kategorii již některé materiály zkoumány a stejně tak i jejich aplikace, nebyly doposud vlákna na základě polyorganosilanu v mikro a nano rozměru popsány což bylo motivací pro tuto práci. Předkládaná diplomová práce se zabývá podrobným zkoumáním poly(vinylmethyldimethoxysilanu) jako možného prekurzoru pro elektrostatické zvlákňování. Za účelem přípravy polymeru na bázi vinylmethylsilanu byla provedena radikálová polymerace a podmínky reakce byly modifikovány se záměrem změny molekulové hmotnosti získaného polymeru. Stupeň polymerace byl upravován na základě změny koncentrace iniciátoru a byl stanovován dynamickým rozptylem světla v roztoku polymeru a spektroskopickou metodou nukleární magnetické rezonance. Elektrostatické zvlákňování je velkou měrou spojeno s vlastnostmi roztoku a důraz byl proto kladen právě na zjištění těchto vlastností. Na základě experimentů bylo zjištěno, že syntetizovaný polymer je na přípravu vláken vhodný. Nicméně byly získány i fragmenty vláken a to s využitím polymeru v roztoku methanolu. Předpokladem zvlákňování je dostatek propojení mezi polymerními řetězci. Tento přístup byl studován se zapojením sol-gel postupu a bylo zjištěno, že fáze sol-gel procesu je velmi významná s ohledem na tvorbu vláken. Dalším využitým postupem pro získání vláken bylo začlenění dalšího polymeru do směsi jako nosiče a tímto postupem byla získána vlákna s různým průměrem.

The stable free radical polymerization methodology for production of controlled macromolecules was investigated using a novel monomer, 2-vinylnaphthalene. Initial polymerizations resulted in molecular weight distributions typical of conventional free radical polymerization techniques (>2.0). Manipulation of the initiator concentration and the molar ratio of initiator to nitroxide demonstrated no significant control over the resulting polymer products. Analysis of the polymerization kinetics for a 2-vinylnaphthalene polymerization performed in the presence and absence of the free radical initiator revealed identical monomer consumption profiles as well as pseudo first order kinetics indicating a significant degree of the thermal polymerization was occurring at the polymerization temperature (130°C). Comparison of the thermal polymerization propensity of 2-vinylnaphthalene and styrene revealed an increased tendency for 2-vinylnapthahlene to undergo thermal polymerization. Styrene is considered highly active in its propensity to thermally polymerize. However, an Arhenius analysis using in situ FTIR was employed to determine the activation energy for the thermal polymerization of styrene and 2-vinylnaphthalene. The 2-vinylnaphthalene activation energy for thermal polymerization was determined for the first time to be almost 30 kJ/mol less than styrene. A novel modified Mayo mechanism was proposed for the 2-vinylnaphthalene thermal initiation mechanism. Moreover, this thermal initiation was employed to initiate nitroxide mediated polymerizations of styrene. This first use of a 2-vinylnaphthalene initiating system resulted in polystyrene with a large macrocyclic initiating fragment. The presence of the initiating moiety was studied using both UV-Vis spectroscopy and 1H NMR spectroscopy. The extension of stable free radical polymerization to the acrylate monomer family was examined using a novel nitroxide mediator, N-tert-butyl-N-[1-diethylphosphono-(2,2-dimethylpropyl)] nitroxide (DEPN). The synthesis of DEPN was monitored using in situ FTIR spectroscopy to determine optimum reaction conditions. The purified nitroxide was subsequently employed in the synthesis of various block and random acrylate copolymers. The production of a unique amphiphilic block copolymer consisting of acrylic sequences was achieved. Poly(t-butyl acrylate-b-2ethylhexyl acrylate-b-t-butyl acrylate) was synthesized using the SFRP process. The t-butyl functionalities were subsequently removed in a post-polymerization acid catalyzed hydrolysis. The effect of steric bulk and electronic factors on the resulting SFRP process was also investigated and revealed similar polymerization kinetics for various alkyl acrylates. However, addition of a hydroxyl containing monomer, 2-hydroxyethyl acrylate, resulted in an increase in the polymerization rate up to 2 times. The rate enhancement was attributed to hydrogen bonding effects and this was confirmed using the unprecedented addition of dodecanol, which also demonstrated a significant rate enhancement. Block copolymers were also achieved using a novel difunctional nitroxide synthesized from 4-hydroxy TEMPO and 1,6-hexamethylene diisocyanate. The identity of the nitroxide was confirmed using mass spectrometry and 1H NMR. The dinitroxide was used in the polymerization of styrene and subsequently used to produce symmetric ABA triblock copolymers with t-butyl styrene using a unique two-step polymerization route. In addition, the dinitroxide demonstrated an increased tendency for decomposition due to the complex mediation equilibrium. The decomposition was studied using GPC to evaluate the decomposition effects on the polymerization. Results of the research efforts presented herein are written as individual research reports with contributing authors and pertinent literature reviews presented at the beginning of each chapter. / Ph. D.

A distribuição de pesos moleculares (DPM) de um polímero afeta as propriedades mecânicas, térmicas e reológicas do material. Além disso, a análise em tempo real de uma reação de polimerização é uma tarefa complicada e, consequentemente, os procedimentos de controle devem ser baseados em valores gerados pelos modelos. Por isso, é extremamente importante ter dados confiáveis sobre distribuições de pesos moleculares, melhorar a eficiência dos métodos existentes e desenvolver novos métodos capazes de prever as heterogeneidades das reações de polimerização. Experimentalmente, a DPM pode ser obtida usando técnicas como a cromatografia de permeação em gel. Para predizer a DPM, vários métodos foram desenvolvidos nas ultimas décadas. Um dos principais é o dos momentos estatísticos, baseado em conceitos puramente estatísticos, que não conseguem descrever completamente a DPM. Além disso, as aproximações com método de Galerkin usam polinômios ortogonais - no caso especifico polinômios de Laguerre - cujos coeficientes são calculados empregando os momentos estatísticos e a distribuição é gerada resolvendo um número de equações definido pelo usuário, relacionado à precisão desejada. Enfim, o método das funções geradoras de probabilidades foi utilizado para prever as DPMs, porém necessitando uma inversão da transformada de Laplace, que introduz problemas numéricos nem sempre possíveis de serem resolvidos. No presente trabalho, o sistema rigoroso de equações diferenciais ordinárias foi resolvido, com objetivo de reduzir as imprecisões e as limitações introduzidas pelas aproximações. Obter diretamente a DPM completa requer a resolução de um sistema contendo cerca de 2Nmax até 3Nmax equações diferenciais ordinárias rígidas, tarefa que há alguns anos era inviável devido a limitações relacionadas à capacidade de cálculo. Foi modelada a DPM para uma reação de polimerização radicalar livre de estireno e de metacrilato de metila. Um interesse especial foi dado à taxa de terminação que é, no momento, um dos temas mais investigados em polimerização por radicais livres. Os resultados das simulações foram comparados com dados experimentais tirados de reatores convencionais e, subsequentemente, com dados experimentais provenientes de um millireactor não convencional. / It is well known that the molecular weight distribution (MWD) of a synthetic polymer affects its mechanical, thermal and rheological properties. Furthermore, the on-line analysis for polymerization reaction is a difficult task and, consequently, the control procedures must rely on values given by models. As such, it is extremely important to have reliable data on the MWD, improve the efficiency of existing methods and develop new ones to predict the heterogeneities of polymerization reactions. Experimentally, the MWD can be obtained using techniques such as Gel Permeation Chromatography (GPC). To predict the MWD, many methods have been developed over the last decades. One of the main methods is the statistical moment treatment, which is based on a pure statistical concept and do not describe the whole MWD. Moreover, Galerkin approximation uses orthogonal polynomials -in general Laguerre polynomials- whose coefficients are calculated exploiting the statistical moment definition and the distribution is generated by solving a user-defined number of equations based on the desired precision. Finally, probability-generating functions that have been used to predict MWDs require Laplace transforms inversions, introducing numerical issues that must be bypassed and are not always solvable. It has been decided to base the approach without adopting any of these methods but directly solving the rigorous ordinary differential equation (ODE) system in order to reduce the inaccuracies and the limitations introduced by approximations. The direct obtention of the MWD requires the resolution of a system containing approximately 2Nmax up to 3Nmax stiff ODE equations that, a few years ago, was unfeasible due computational time limitations. The MWDs for a free radical styrene polymerization system and a methyl methacrylate system have been modeled. A special focus was given to the termination rate constant, which is, at the present, one of the most investigated topics in free radical polymerization. The results of the simulations were compared to experimental data taken from conventional reactors and, subsequently, to experimental data coming from an unconventional millireactor.