Spelling suggestions: "subject:"heat."" "subject:"held.""
741 |
Filtração de água com diferentes concentrações de argila e silte em filtros de discos para irrigação localizada / Filtration of water with different clay and silts concentrations in discs filters for trickle irrigationOliveira, Cleomar Ferreira de 07 April 2010 (has links)
O uso da irrigação localizada está em pleno crescimento no Brasil, em decorrência da escassez de recursos hídricos e a necessidade de poupar água na irrigação. Isto tem requerido aplicação de conhecimentos no desenvolvimento de materiais e equipamentos que tendem a otimizar os sistemas de irrigação localizada. Os sistemas de irrigação localizada requerem obrigatoriamente sistemas de filtração para um tratamento de água. Os filtros são fundamentais à qualidade de água utilizada na agricultura irrigada, promovendo melhor desempenho dos sistemas de irrigação e seus componentes. Considerou para esta pesquisa o sistema de filtração que é fundamental em projetos de irrigação localizada, onde os emissores têm orifícios de dimensões reduzidas e ficariam obstruídos com o uso de água sem filtração adequada. Os ensaios foram realizados no Laboratório de Irrigação do Departamento de Engenharia de Biossistemas, da Escola Superior de Agricultura Luiz de Queiroz - ESALQ/USP, Campus de Piracicaba - SP. O experimento foi conduzido em duas etapas: na primeira, fez-se a caracterização hidráulica das equações de perdas de carga em função da vazão circulante nos filtros de discos 1 polegada mesh 120 e 155, utilizando água limpa e com auxilio das equações definiu-se duas vazões para realizar os ensaios de filtração: (a) vazão denominada ideal, correspondente à recomendada pelo fabricante, e (b) metade da vazão ideal. Na segunda etapa com auxílio das equações da perda de carga em função da vazão, analisou-se o desempenho do processo de filtração em função do tempo (240 minutos), utilizando três concentrações de sólidos em suspensão de argila e silte diluída em água nas seguintes proporções (1,0, 1,5 e 2,0) g L-1, mantendo-se a vazão constante durante o processo de filtração. Nesta etapa avaliou-se o processo de filtração, porcentagem de material retido, perda de carga e a quantidade de material retido. Considerando as condições em que a pesquisa foi realizada e com base nos resultados obtidos, conclui-se: o filtro de mesh 155 mostrou-se superior ao filtro de mesh 120 na remoção de sólidos em suspensão; a evolução da perda de carga nos filtros de mesh 155 foi mais rápida que nos filtros de mesh 120 devido ao maior acúmulo do material sólido em sua superfície, decorrência direta do diâmetro do orifício do elemento filtrante. / The use of the trickle irrigation is growing in Brazil, in consequence of the shortage of waters resources and the need to save irrigation water. This has been requesting knowledge application to development of equipments to optimize the trickle irrigation systems. Trickle irrigations systems always require filtration systems for a basic water treatment. The filters are fundamental for the water quality used in irrigated farming, providing better performance of irrigation systems and theirs components. It considered for this research the filtration system that is fundamental in project of trickle irrigation. The emitters have holes of reduced dimensions and they would be obstructed with the use of water without appropriate filtration. The trials were carried out in the Irrigation Laboratory of the Biosystems Engineering Department of the ESALQ/USP, Piracicaba SP. The experiment had two stages: the first, it was made the hydraulic characterization of the head loss equations according to the free flow in discs filter 1 inch mesh 120 and 155, using clean water and this head loss equations two flow was defined to accomplish the filtrations rehearsals:(a) ideal flow, is that recommended by the manufacturer,(b) half of the ideal flow. In the second way using the head loss equations according to the flow, the acting of the filtration process was analyzed according to the time (240 minutes), using clay and silts concentrations in the proportions of 1,0; 1,5 and 2,0 g L-1 diluted in water, keeping constant flow during the filtrations process. In this second stage it was evaluated the filtration process, percentage of retained material, head loss and the amount of retained material. Considering the obtained results, it follows that: the filter of mesh 155 was superior than to the filter of mesh 120 to remove of solids of water, the evolution of the head loss in the filters of mesh 155 was faster than the filters of mesh 120 due to the largest accumulation of the solid material in its surface, direct consequence of the holes diameter of the filtration element.
|
742 |
Mecanismos de ação do miRNA-196a sobre a progressão do ciclo celular em câncer. / Mechanisms of action of microRNA-196 on cell cycle progression in cancer.Barbosa, Jean Lucas Parpinelli 18 February 2016 (has links)
Os microRNAs regulam uma parte significativa dos genes humanos, dentre os quais genes responsáveis por controlar o ciclo celular. Em estudos anteriores identificou-se maior expressão do miR-196a em amostras de carcinoma epidermoide de cabeça e pescoço (CECP), um dos tipos de tumor mais comuns no mundo, quando comparadas a margens cirúrgicas. Através de estudos de ganho de função, observou-se diminuição da proliferação de queratinócitos orais e de linhagens celulares após a super-expressão do miR-196a. Neste trabalho avaliamos a expressão gênica e de proteínas em linhagem celular em diferentes tempos após super-expressão do microRNA. Identificamos alterações na expressão de genes ativadores e repressores do ciclo e diminuição na expressão de p27, alvo do miR-196a. Observamos que após 48 horas de super-expressão a maioria dos genes repressores do ciclo celular estavam mais expressos, fato possivelmente associado à diminuição da proliferação. Sugerimos que a super-expressão de miR-196a possa ser considerada como uma possível terapia para o tratamento do câncer. / MicroRNAs regulate a proportion of human genes, among which genes responsible for cell cycle control. Squamous cell carcinoma of head and neck (HNSCC) is among the most common malignancies worldwide. In a previous study we identified enhanced expression of miR-196a in HNSCC samples compared with surgical margins and increased expression of miR-196a in HNSCC-derived cell lines compared to oral keratinocytes. Following a gain of function study, there was decreased oral keratinocyte and HNSCC cell line proliferation. In this study, gene expression and protein levels were assessed within 48 hours after overexpression of miR-196a. Changes in gene expression levels of cell cycle activators and repressors was observed, as well as the decreased expression of p27, a gene targeted by miR-196a. At 48 hours following the overexpression of miR-196a most inhibitor genes were more expressed. This fact could be associated with the decrease in cell proliferation after overexpression of miR-196a. We suggest that the overexpression of miR-196a is considered a tool for CECP therapy.
|
743 |
Influência do posicionamento dos dutos de admissão de um cabeçote fundido e usinado no resultado swirl. / Influence of the intake ports positioning of cast and machined cylinder head on the swirl result.Xavier, Ewerton Correa dos Reis 17 August 2017 (has links)
O objetivo deste trabalho é avaliar a influência sobre o número de swirl e desempenho do motor diesel a partir de cabeçotes fabricados com variação no posicionamento relativo dos dutos de admissão em duas direções perpendiculares. Inicialmente definiu-se que o valor a ser deslocado seria de 1 milímetro, e então para cada combinação entre os dutos de admissão curto e longo deveria ser fabricado um número mínimo de seis cabeçotes para posteriores ensaios em bancada com dinamômetro. Após a fundição fabricar as nove combinações definidas, sendo uma delas com os eixos em suas condições nominais, isto é, sem o deslocamento de um milímetro, obtiveram-se um total de 60 cabeçotes. Os cabeçotes foram então controlados em máquina tridimensional, usinados e montados todos os seus componentes e enviados para a medição do número de swirl em máquina desenvolvida especialmente para este teste. Para cada cabeçote mediu-se o número de swirl duas vezes, e em seguida cada uma das nove combinações foram ensaiadas no mesmo dinamômetro e avaliados os respectivos parâmetros: consumo específico de combustível, curva de torque e emissão de poluentes. Para cada combinação mediu-se a curva de torque duas vezes e mediu-se três vezes o ciclo de emissões com treze pontos (ESC). Nos resultados de swirl, três combinações apresentaram-se fora dos limites da tolerância, uma abaixo do mínimo da tolerância em 22,7% e as outras duas além do máximo da tolerância em respectivamente 18,2% e 17,8%. Nos resultados de dinamômetro, nenhuma combinação se apresentou fora dos limites estabelecidos para o modelo de motor ensaiado nos seguintes parâmetros: consumo específico de combustível, torque e emissões de CO, HC, MP e NOx. / The main purpose of this work is to evaluate the influence on the swirl number and the engine diesel performance based on cylinder heads produced with variation on relative positioning of inlet ports in two perpendicular directions. Firstly, it was defined that the value to be displaced would be 1 millimeter, and then for each combination between the short and the long inlet ports should be produced a minimum of six cylinder heads for further testing on the dynamometer. After the foundry production of the defined nine combinations, one of them having the axis in their nominal positions, i.e. without the displacement of 1 millimeter, a total of 60 cylinder heads were obtained. These cylinder heads were measured in a tridimensional machine, machined and all of their components were assembled and their swirl number were measured in the machine developed specially for this method. For each cylinder head the swirl number was measured twice and after that all nine combinations were performed at the same dynamometer and the following parameters were evaluated: fuel consumption, torque curve and pollutants emission. For each combination the torque curve was measured twice and the thirteen point\'s emissions cycle (ESC) was measured three times. Concerning the swirl results, three combinations ended up out of the tolerance limits, one of them as 22,7% below the minimum tolerance and the other two as 18,2% and 17,8% respectively over the maximum tolerance. Regarding the dynamometer results, no combination ended up out of defined tolerances for the kind of engine tested in the following parameters: fuel consumption specific, torque and emissions of CO, HC, PM and NOx.
|
744 |
Estudo in vitro e in vivo de novos compostos: com alvo-específico (hnRNP K e SET) ou com ação na mitocôndria para uso como antitumoral em carcinoma oral ou como citoprotetor em célula não-tumoral / Studies in vitro and in vivo novel compounds: with target-specific (hnRNP K and SET) or the mitochondrion action for use as antitumor in oral carcinoma cell or as cytoprotection in non-tumorGoto, Renata Nishida 12 September 2017 (has links)
Os avanços na compreensão da biologia das neoplasias de cabeça e pescoço têm aberto novas direções na ciência. As pesquisas estão sendo direcionadas para o desenvolvimento de terapias com alvos moleculares específicos, os quais são úteis tanto na predição dos tratamentos, quanto na seleção de pacientes que podem responder a uma determinada terapia com base nas alterações moleculares dos tumores. As proteínas hnRNP K e SET, recentemente identificadas como superexpressas em câncer de cabeça e pescoço, representam um novo e atrativo alvo terapêutico para esse tipo de câncer. As mitocôndrias também tem sido objeto de estudo, pois participam nos processos de morte celular por apoptose, e estão envolvidas na sobrevivência celular. Neste estudo avaliamos os efeitos in vitro e in vivo em carcinoma oral e em célula não-tumoral, de novos compostos com alvo-específico (hnRNP K e SET) ou com ação na mitocôndria, para aplicação tanto como antitumoral, como citoprotetor. A citotoxicidade dos compostos foi avaliada pelo método de resazurina nas linhagens tumorais de carcinoma de células escamosas de cabeça e pescoço (HN13, HN12, HN6 e CAL27). Os compostos 11 e 17, alvos específicos da proteína hnRNP K, apresentaram baixa citotoxicidade; o peptídeo OP449, alvo específico da proteína SET, e o composto YV-241, com ação na mitocôndria, apresentaram alta citotoxicidade, com valores de IC50 5,11 e 7,77 ?M, respectivamente. OP449 alterou as proteínas reguladas por SET e reduziu a proliferação das células tumorais no modelo de xenoenxerto ortotópico em camundongo BALB/ c nude; os resultados, porém, não foram significativos. A associação de OP449 com FTY720 promoveu um efeito sinérgico significativo (CID<0,7) na linhagem celular HN12 e reduziu os tumores do xenoenxerto no dorso em camundongos BALB/c nude. O composto YV-241 alterou o potencial de membrana mitocondrial das células tumorais e aumentou o número de mitocôndrias, observado por microscopia eletrônica de transmissão e por microscopia confocal, reduziu proteínas envolvidas com vias de sinalização de sobrevivência, proliferação, ciclo celular e angiogênese, e induziu apoptose com o envolvimento da mitocôndria. Além disso, o composto reduziu os tumores do modelo de xenoenxerto. O possível efeito citoprotetor do composto JM-E-H foi observado na linhagem NOK-SI, por meio da regulação da via de sinalização de HIF-1?. Portanto, OP449 + FTY720 e o composto YV-241 apresentam potencial terapêutico contra carcinoma oral, e o composto JM-E-H, potencial efeito citoprotetor / Advances in understanding the biology of head and neck cancer have opened new directions in science. Research is being directed at the development of therapies with specific molecular targets that are useful in predicting treatments or in selecting patients who may respond to a particular molecular therapy based on molecular changes of the tumors. The hnRNP K and SET proteins, recently identified as overexpressed in head and neck cancer, represent a new and attractive therapeutic target for this type of cancer. Mitochondria have also been the object of study, since they participate in the processes of cell death by apoptosis, and are involved in cell survival. In this work we evaluated the in vitro and in vivo effects in oral carcinoma and non-tumor cell of new compounds with specific target (hnRNP K and SET) or with action in mitocondria, for application either as antitumor or cytoprotectant. The cytotoxicity of the compounds was evaluated by the resazurin method in head and neck squamous cell carcinoma cell lines (HN13, HN12, HN6 and CAL27). Compounds 11 and 17, specific targets of hnRNP K protein, showed low cytotoxicity; the peptide OP449, specific target of SET protein, and compound YV-241, acting on mitochondria, showed high cytotoxicity, with IC50 values of 5.11 and 7. 77?M, respectively. OP449 altered SET-regulated proteins and decreased proliferation of tumor cells in the orthotopic xenograft model in BALB/c nude mouse. The results, however, were not significant. The association of OP449 with FTY720 caused a significant synergistic effect (CID <0.7) on HN12 cell line, and decreased the xenograft tumors. The YV-241 compound altered mitochondrial membrane potential of tumor cells and increased the number of mitochondria, observed by transmission electron microscopy and by confocal microscopy, reduced proteins involved with signaling pathways for survival, proliferation, cell cycle and angiogénesis, and induced apoptosis with the involvement of mitochondria. In addition,the compound reduced tumors of the xenograft model. The possible cytoprotective effect of the compound JM-E-H was observed in the NOK-SI lineage through the regulation of HIF-1? signaling pathway. Therefore, OP449 + FTY720 and compound YV-241 show therapeutic potential against oral carcinoma, and the compound JM-E-H, potential cytoprotective effect
|
745 |
Microaspersor com microtubos: um novo conceito hidráulico na irrigação localizada / Micro-sprinkler with microtube emitters: a new trickle irrigation hydraulic concernAlmeida, Ceres Duarte Guedes Cabral de 19 November 2008 (has links)
O microtubo é um emissor simples, de baixo custo, com a grande vantagem de melhor adaptação em condições de topografias onduladas e montanhosas, onde a pressão na linha lateral varia consideravelmente. Este estudo constitui a elaboração de um modelo para dimensionamento hidráulico de microaspersores, cujo emissor é um microtubo de tamanho variável. O fundamento teórico do estudo baseia-se na premissa da compensação da perda de carga na linha lateral e das diferenças topográficas do terreno, através da variação do comprimento do microtubo. Os objetivos específicos deste trabalho foram: determinar as características hidráulicas do microtubo; desenvolver um modelo para dimensionamento do sistema de irrigação proposto e sugerir um defletor para o microaspersor; avaliar a uniformidade de vazão ao longo de linhas laterais experimentais em declive e desenvolver uma planilha eletrônica, para dimensionamento de microtubos. Dois microtubos de diferentes diâmetros foram utilizados neste estudo. Entre as características hidráulicas determinadas, estão o diâmetro interno real, relação vazão-pressão e pressão-comprimento. A determinação do diâmetro interno médio dos microtubos foi realizada em laboratório através da medida de fluxo sob regime laminar e pelo projetor ótico de perfil. Uma equação resultante da combinação das equações de energia desenvolvida por Bernoulli e Darcy-Weisbach além da equação de Hagen-Poiseuille para cálculo do fator de atrito (f), foi deduzida para cálculo do diâmetro. Uma bancada de ensaios foi montada para realização dos ensaios. Os experimentos foram realizados numa faixa de número de Reynolds entre 8000 e 17000, portanto regime de escoamento turbulento. A equação de Darcy-Weisbach foi utilizada para cálculo da perda de carga total e a equação de Blasius foi utilizada para cálculo do fator de atrito (f). Duas laterais foram dimensionadas e instaladas em diferentes declividades (0,5 e 2,3 %). Medidas de dispersão foram utilizadas para avaliar e classificar o sistema de irrigação. Dois modelos de defletores foram desenvolvidos em laboratório, e avaliados em termos de distribuição espacial da água e facilidade construtiva. A análise dos resultados experimentais foi realizada em bases empíricas e teóricas. A avaliação hidrodinâmica do diâmetro dos microtubos aproximou-se muito da determinação através do projetor ótico de perfil, o que indica ser uma alternativa viável para o dimensionamento. A estimativa da pressão de operação do microaspersor baseada nas equações propostas foi bem próxima à pressão observada. O modelo empírico estimou o comprimento do microtubo em função da pressão com bastante precisão, consequentemente a uniformidade de vazão ao longo da lateral foi classificada como excelente em ambas as situações de declive, com coeficientes superiores a 95 %. Uma análise de sensibilidade para estimar as implicações no desempenho hidráulico do sistema, dos erros ou das mudanças nas variáveis envolvidas no dimensionamento, mostrou que o desempenho do emissor é extremamente sensível ao diâmetro do microtubo. Baseado nos resultados obtidos com os ensaios de distribuição pode-se afirmar que é necessário um maior aprofundamento no projeto do defletor do microaspersor. Em geral, a metodologia proposta oferece a possibilidade de ajustar quaisquer variações na carga de pressão ou na topografia do terreno e assim, obter vazão constante ao longo da linha lateral. / The microtube is a simple and cheap emitter which has advantage of be suitable for undulating and hilly conditions, where pressure in the lateral line varies considerably. This study aims to develop an empirical approach to the design of a novel micro-sprinkler that uses microtube as the emitters whose length is variable. The theoretic concern is the irrigation system should be designed to compensate variations along lateral line as a function of the friction loss and elevation. General objectives were: hydraulic characterization of the microtube; empiric equations to design; to develop a kind of deflector; to evaluate application uniformity for micro-sprinkler and to do a worksheet to design this system. The relationship between discharge, pressure, and length for microtube emitters of two different diameters were done. The diameter was measured based on flow measurements under laminar flow condition and by accurate optical equipment. Combination of the energy (Bernoulli) and Darcy-Weisbach equations and Hagen-Poiseuille equation (friction factor laminar flow) gives the diameter. A test table to do tests was built. The range of Reynolds numbers during the experiment was 8,000 to 17,000, then turbulent flow. The friction head losses were calculated using the Darcy-Weisbach equation and the friction factor by Blasius equation. Two experimental lines were designed and laid on different slopes (0.5 % and 2.3 %). To evaluate the uniformity of application of water, dispersion measures are used. Two deflectors were created and tested in the laboratory by spatial distribution analysis and easily to manufacture. The data was analyzed by theoretical and empirical approaches. The diameter values of the microtubes were very close to those by optical equipment, then it is a good alternative method to determinate the diameter of the microtube. The pressure observed values were very close to estimated. The empirical approach determined the length required for the microtube emitters with high accuracy, consequently the flow rate uniformity along lateral line was excellent for both laterals, their uniformity coefficients were above 95%. A sensitivity analysis to estimate the implications of errors or changes in key variables on the hydraulic performance of this system showed that the emitter performance is particularly sensitive to the emitter diameter. The deflector tests results showed low spatial uniformity, so we can say that it is necessary more studies at this part of this micro-sprinkler. Finally, the methodology proposed allow adjust any head pressure or elevation variations to high uniformity along of lateral line.
|
746 |
Engineering Better Protective Headgear for Sport and Military ApplicationsKevin G McIver (6577457) 10 June 2019 (has links)
Recent applications of medical imaging, advanced polymers, and composites have led to the development of new equipment for athletes and soldiers. A desire to understand the performance of headgear that resists impacts ongoing since the 1970’s has found more traction in recent years with the usage experimental models that have a greater degree of bio-fidelity. In order to determine which features of helmets from different sports (Soccer, Lacrosse, Football, and Hockey) were tested on a Hybrid III 50th Percentile Male headform with an accelerometer rig at the center of mass.Testing was performed by administering impacts to the headform with an impulse hammer that provides transient force data in order to quantify inputs and outputs of the system to develop a non-dimensional transfer function. Helmet performance is compared by sport worn in order to determine desirable manufacturing features and develop prototype helmets that outperforms current athletic equipment.
|
747 |
Dosimetric Consequences of the Parotid Glands Using CT-To-CBCT Deformable Registration During IMRT For Late Stage Head And Neck CancersUnknown Date (has links)
Patients receiving Intensity Modulated Radiation Therapy (IMRT) for late stage head and neck (HN) cancer often experience anatomical changes due to weight loss, tumor regression, and positional changes of normal anatomy (1). As a result, the actual dose delivered may vary from the original treatment plan. The purpose of this study was (a) to evaluate the dosimetric consequences of the parotid glands during the course of treatment, and (b) to determine if there would be an optimal timeframe for replanning. Nineteen locally advanced HN cancer patients underwent definitive IMRT. Each patient received an initial computerized tomography simulation (CT-SIM) scan and weekly cone beam computerized tomography (CBCT) scans. A Deformable Image Registration (DIR) was performed between the CT-SIM and CBCT of the parotid glands and Planning Target Volumes (PTVs) using the Eclipse treatment planning system (TPS) and the Velocity deformation software. A recalculation of the dose was performed on the weekly CBCTs using the original monitor units. The parameters for evaluation of our method were: the changes in volume of the PTVs and parotid glands, the dose coverage of the PTVs, the lateral displacement in the Center of Mass (COM), the mean dose, and Normal Tissue Complication Probability (NTCP) of the parotid glands. The studies showed a reduction of the volume in the PTVs and parotids, a medial displacement in COM, and alterations of the mean dose to the parotid glands as compared to the initial plans. Differences were observed for the dose volume coverage of the PTVs and NTCP of the parotid gland values between the initial plan and our proposed method utilizing deformable registration-based dose calculations. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2015. / FAU Electronic Theses and Dissertations Collection
|
748 |
Fatores associados ao perímetro craniano ao nascer: comparação entre duas coortes de nascimento em Ribeirão Preto, SP, com intervalo de 30 anos / Factors associated with head circumference at birth: a comparison between two birth cohorts in Ribeirão Preto, SP, born 30 years apartValeria Dias Sampaio da Cunha 30 May 2018 (has links)
Introdução: O perímetro cefálico (PC) é definido como o tamanho da cabeça da criança em sua maior área. O crescimento da caixa craniana está relacionado ao crescimento e volume cerebral e, por isso, deve ser rotineiramente medido e utilizado para seguimento individual, pois é um forte preditor do neurodesenvolvimento. Sabe-se que o PC é relacionado a condições ambientais e de saúde materna, e sua avaliação adquiriu grande importância após a recente epidemia de infecção pelo vírus Zika no Brasil e em outras partes do mundo, que se associou ao aumento da incidência de microcefalia. Objetivo: Avaliar a associação do perímetro cefálico de recém-nascidos com características sociodemográficas e hábitos maternos durante a gestação em duas coortes de nascimentos de Ribeirão Preto, SP, em 1978/79 e 2010. Método: foram analisados dados referentes a dois estudos de coortes de nascimento realizados em Ribeirão Preto, SP, um em 1978/79 e o outro em 2010. Foram incluídos recém-nascidos vivos de parto único hospitalar que tiveram a informação do PC ao nascer. Os dados foram coletados de forma semelhante nos dois momentos, utilizando questionário criado para o estudo e dados coletados nos prontuários. As variáveis utilizadas nas análises foram sexo do RN, restrição do crescimento intrauterino (RCIU), idade gestacional, idade e escolaridade maternas, tabagismo durante a gestação, situação conjugal, paridade, tipo de parto e tipo de hospital. Foram realizadas análises de regressão linear simples e múltipla para testar a associação da variável resposta \"perímetro cefálico\" com as variáveis independentes em cada ano, utilizando o pacote estatístico SAS 9.3. Resultados: Na coorte de 1978/79 participaram 2941 recém-nascidos e em 2010 participaram 7353. A média geral do PC em 1978/79 foi de 34,10 cm, um pouco menor do que a de 2010, de 34,29 cm. Nasceram mais meninos em 1978/79 e mais meninas em 2010. Excetuando a RCIU, as demais variáveis apresentaram mudanças na frequência nesse intervalo de tempo. A escolaridade materna aumentou, a proporção de mães adolescentes ficou estável, em torno de 12% e a de mães >=35 anos aumentou de 8,3% para 12,5%. Tabagismo materno na gestação se reduziu de 28,3% para 11,8% e a taxa de cesáreas mais que dobrou, de 27,5% para 58,6%. Todas as variáveis estudadas se associaram com o PC na análise não ajustada, exceto paridade em 1978/79. Nos dois momentos, as variáveis que foram mais fortes preditoras de maiores valores de PC foram sexo masculino e parto cesárea, e de menores valores de PC o tabagismo materno na gestação e RCIU. A RCIU foi o fator que mais impactou, sendo que essas crianças tiveram medida de PC reduzida em 1,30cm (IC95% -1,43; -1,18) em 1978/79 e em 1,74cm (IC95% - 1,87; -1,61) em 2010, quando comparadas com as nascidas sem restrição. Conclusão: Características maternas durante a gestação, apesar de terem melhorado com o passar dos anos, ainda precisam de atenção. Muitas mulheres ainda carecem de informações e de cuidados pré-natais. Esforços devem ser realizados para detecção precoce e intervenção visando a redução das taxas e dos efeitos da RCIU / Introduction: The head circumference (HC) is defined as the size of the child\'s head in its larger area. Cranial case growth is related to brain growth and volume and therefore should be routinely measured and used for individual follow-up as it is a strong predictor of neurodevelopment. It is known that HC is related to environmental and maternal health conditions, and its evaluation has acquired great importance after the recent epidemic of Zika virus infection in Brazil and in other parts of the world, which was associated with the increase in the incidence of microcephaly. Objective: To evaluate the association of the HC of newborns with sociodemographic characteristics and maternal habits during gestation period in two birth cohorts of Ribeirão Preto, State of São Paulo, Brazil, in 1978/79 and 2010. Method: Data were analyzed for two cohort studies of birth in Ribeirão Preto, SP, one in 1978/79 and the other in 2010. We included live births of single hospital delivery that had the information of the HC at birth. The data were collected in a similar way in both moments, using a questionnaire created for the study and data collected in the medical records. The variables used in the analysis were gender of the newborn, intrauterine growth restriction (IUGR), gestational age, maternal age and schooling, smoking during pregnancy, marital status, parity, type of delivery and type of hospital. Simple and multiple linear regression analyzes were performed to test the association of the response variable \"head circumference\" with the independent variables in each year, using the statistical package SAS 9.3. Results: In the 1978/79 cohort, 2941 newborns participated and 7353 participated in 2010. The general average of the HC in 1978/79 was 34.10 cm, slightly lower than that of 2010, 34.29 cm. More boys were born in 1978/79 and more girls in 2010. Except for IUGR, the other variables showed changes in the frequency in that time interval. Maternal education increased, the proportion of adolescent mothers remained stable at around 12% and that of mothers >=35 years increased from 8.3% to 12.5%. Maternal smoking in pregnancy decreased from 28.3% to 11.8% and the cesarean rate more than doubled, from 27.5% to 58.6%. All variables studied were associated with HC in the unadjusted analysis, except for parity in 1978/79. At the two moments, the variables that were the strongest predictors of higher HC values were male sex and cesarean delivery, and lower values of HC were maternal smoking in pregnancy and IUGR. The IUGR was the factor that most impacted, and these children had a HC reduced by 1.30 cm (95% CI -1.43; -1.18) in 1978/79 and 1.74 cm (CI 95% -1.87; -1.61) in 2010 when compared to those born without restriction. Conclusion: Maternal characteristics during gestation, although they have improved over the years, still need attention. Many women still lack information and prenatal care. Efforts should be made for early detection and intervention to reduce the rates and effects of IUGR.
|
749 |
The course of cognition in mentally ill offenders and the implications for risk of violence : a 10-12-year follow-up studyBrown, Sarah January 2017 (has links)
Background: It is now well established that there are core cognitive impairments associated with a diagnosis of schizophrenia. In parallel with our increased understanding of these core deficits, our awareness that mentally ill offenders (MIOs) are at additional risk of cognitive impairment due to an increased rate of traumatic brain injury and substance abuse has also grown. Absent from the literature is evidence of whether these cognitive impairments change over longer periods of time in MIO’s and whether these changes, or baseline abilities, impact an individual’s risk of violence. Furthermore, the negative impact head injury has on an individuals’ cognitive, behavioural and psychological functioning is well documented. These changes can lead to an increased likelihood of violence and crime, yet there is currently a scarcity of knowledge regarding the prevalence of head injury within mentally ill offenders in Scotland and its association with risk-related outcomes. Aims: The aims of the present thesis were to; (a) Examine the course of cognition in N=49 mentally ill offenders who underwent neuropsychological assessment while in the State Hospital, Scotland in 2004-5, and assess whether baseline or change in cognition predicts violent incidents or risk at follow-up, and; (b) Examine the cross-sectional association between head injury, substance abuse and risk-related outcomes of all individuals within the forensic network in Scotland for whom data could be extracted (N=428). Hypotheses: (a) We hypothesized that processing speed, verbal comprehension, working memory, delayed verbal memory, delayed non-verbal memory, impulsivity, inattention and problem-solving would decline over a 10-year period, and that deficits in impulsivity, emotion recognition, working memory and delayed memory would predict patients’ risk-related outcomes in a sample of mentally ill offenders. (b) It was also hypothesized that the presence of head injury and/or substance abuse within patients would predict worse risk-related outcomes, namely: quantity of violent offences, risk of harm to self, risk of harm to others and severity of violent offences. Analysis: We conducted a series of repeated measures MANOVAs, MANCOVAs and hierarchical linear regressions in SPSS Statistics to test our hypotheses. Individuals with a primary or secondary diagnosis of a learning disability were excluded. Results: (a) Our results propose that cognitive abilities significantly change over time (F(1.51, 30.1) = 5.98, p = .011), but direction of change is ability dependent. We found that impulsivity (Effect Size (ES) = .253), inattention (ES = .233), working memory (ES = .288) and auditory delayed memory (ES= .268) worsen over time. Measures of impulsivity and working memory significantly predicted some, but not all, risk-related outcomes, however these effects became diluted once additional variables with shared variance were added into the predictive models. We did not find that traumatic brain injury, substance misuse or alcohol misuse significantly mediated change in cognition over time. (b) In the national cohort study, results suggested that head injury had a significant effect on HCR total scores, F(1,259) = 6.679, p = .010 (partial eta square = .025), violence during admission (χ2 = 5.545, p = .022) and violent offences at a .1 p-value only, F(1,259) = 3.495, p = .063 (partial eta square = .013). Drug misuse only had a significant impact on total violent offences, F(1,259) = 8.933, p = .003 (partial eta square = .033) and nothing else. Furthermore, the interaction between alcohol misuse and schizophrenia also only had impact on total violent offences, F(1, 259) = 7.516, p = .007 (partial eta square = .028). Head injury was not significantly associated with either historical or current self-harm, however alcohol misuse, drug misuse and schizophrenia were. Conclusions: Our results highlight the unstable nature of cognition in mentally ill offenders and the impact that head injury has on violence-related outcomes, over and above substance misuse and a diagnosis of schizophrenia. This has potentially renovating implications for clinical practice regarding risk management, assessment, and treatment planning.
|
750 |
RADIOINJÚRIA ASSOCIADA AOS POLIMORFISMOS DE BASE ÚNICA DOS GENES ATM E TP53 EM PACIENTES COM CÂNCER DE CABEÇA E PESCOÇO.Luciano, Cristiana da Costa 14 November 2012 (has links)
Made available in DSpace on 2016-08-10T10:38:45Z (GMT). No. of bitstreams: 1
Cristiana da Costa Luciano.pdf: 1987242 bytes, checksum: 2f3402c7b9c457e5f89de59897be59ea (MD5)
Previous issue date: 2012-11-14 / The head and neck cancer is the fifth most common
in Brazil, being the most predominant histology type the squamous cell carcinoma.
Radiation therapy is a procedure for treatment with the efficacy variable, and may
play an important role in controlling tumor growth. Faced with this therapy, the
patient is exposed to ionizing radiation that can cause adverse effects resulting
cessation of treatment. The objective was to evaluate the association of
polymorphisms of TP53 and ATM genes in patients with head and neck cancer with
adverse effects on normal tissues presented as a result of radiotherapy. Materials:
The DNA was extracted 54 samples of peripheral blood of patients with head and
neck cancer, then the fragments of TP53 and ATM were amplified and
subsequently sequenced to check for any polymorphism which may be responsible
for the radiosensitivity of patients. Statistical analysis was performed using the
SPSS 17.0 software. Results and Discussion: In univariate analysis, patients who
had experienced adverse effects RT suspended acute low and high grade with
RTOG skin (p = 0.012). Those who had a family history of cancer showed higher
adverse acute laryngeal RTOG TGI high (p = 0.040). The exchange C> T at
position 11322 of TP53 (intron 3), the ATM and TP53 polymorphisms analyzed and
the frequency of acute and chronic adverse effects were not significant (p>05).
Conclusions: Based on these results is of utmost importance that alternatives are
created to predict the dose to be prescribed during radiotherapy, preventing
adverse effects and discontinuation of treatment and also providing better tumor
control. / O câncer de cabeça e pescoço, no Brasil, é o quinto mais
comum, sendo o tipo histológico mais predominante de carcinoma de células
escamosas. A radioterapia é uma das modalidades de tratamento com eficácia
variável, podendo desempenhar um papel importante no controle do tumor. Diante
essa terapêutica, o paciente está exposto a radiações ionizantes que podem
causar efeitos adversos gerando a interrupção do tratamento. O objetivo foi avaliar
a associação de polimorfismos dos genes TP53 e ATM em pacientes com câncer
de cabeça e pescoço com efeitos adversos sobre os tecidos normais apresentados
como resultado da radioterapia. Materiais: O DNA foi extraído de 54 amostras de
sangue periférico de pacientes com câncer de cabeça e pescoço, em seguida os
fragmentos de TP53 e ATM foram amplificados e posteriormente sequenciados a
fim de verificar se os polimorfismos poderiam estar associados à
radiossensibilidade dos pacientes selecionados. A análise estatística foi realizada
utilizando o software SPSS 17.0. Resultados e Discussão: Por meio de análise
univariada, pacientes que tiveram a RT suspensa apresentaram efeitos adversos
agudo de baixo e alto grau com RTOG de pele (p=0,012). Aqueles que tinham
história familiar de câncer apresentaram maiores efeitos adversos agudo de laringe
com RTOG TGI alto (p=0,040). A troca C>T na posição 11322 do gene TP53
(intron 3), os polimorfismos de TP53 e ATM analisados e a frequência de efeitos
adversos agudos e crônicos não foram significativos para (p>0,05). Conclusões:
Diante dos resultados obtidos é de suma importância que alternativas sejam
criadas para predizer a dose a ser prescrita durante a radioterapia, prevenindo os
efeitos adversos e a interrupção do tratamento e ainda, promovendo melhor
controle tumoral.
|
Page generated in 0.0715 seconds