Spelling suggestions: "subject:"dspace.""
61 |
Desenvolvimento e aplicação de método analítico para determinação de ésteres etílicos de ácidos graxos (bioindicadores do etanol) em amostras de mecônio / Development and application of an analytical method for the determination of fatty acid ethyl esters (biomarkers of ethanol) in meconium samplesMarli Roehsig 28 August 2009 (has links)
O álcool é uma das substâncias psicoativas mais consumidas mundialmente e seu uso por mulheres em idade reprodutiva, em particular, tem representado grande preocupação por parte de especialistas e da sociedade em geral. Apesar dos efeitos adversos associados ao ato de ingerir bebidas alcoólicas durante a gestação ser bastante documentados e conhecidos, sabe-se que uma parcela de mulheres grávidas tem dificuldades em abandonar o hábito. O consumo excessivo de álcool durante a gravidez tem sido associado com a síndrome fetal pelo álcool (FAS), caracterizada por crianças com dificuldades comportamentais e de aprendizado. Entretanto, devido ao sentimento de culpa e medo de ações punitivas, mulheres raramente admitem terem utilizado álcool durante a gestação. Como resultado, uma série de marcadores biológicos tem sido estudada para se diagnosticar a exposição fetal ao etanol. Dentre os marcadores utilizados estão os ésteres etílicos de ácidos graxos (FAEE), que podem ser detectados em amostras de mecônio de recém-nascidos. No presente trabalho, um método analítico foi desenvolvido visando a detecção de oito FAEEs em amostras de mecônio e aplicada em amostras coletadas de recém-nascidos cujas mães admitiram ou não o uso de etanol durante a gestação. A microextração em fase sólida por Headspace (HS-SPME), uma técnica de preparação de amostras relativamente recente, foi utilizada para análise. Os FAEEs foram identificados e quantificados por cromatografia gasosa/espectrometria de massas (GC/MS), operado no modo de ionização química. Os correspondentes ésteres etílicos deuterados foram sintetizados e utilizados como padrão interno. Os limites de quantificação (LOQ) obtidos foram abaixo de 150 ng/g e limites de detecção (LOD) foram abaixo de 100ng/g para todos os analitos. O método mostrou boa linearidade na concentração estudada (LOQ-2000ng/g), com coeficiente (r2) melhor que 0.98. Os valores de precisão apresentaram coeficientes de variação menores que 15% para todos os FAEEs estudados. Quando o método foi aplicado em amostras de mecônio, foi possível detectar níveis de alguns FAEEs de recém-nascidos não suspeitos a exposição fetal ao etanol. / Alcohol is the main psychoactive drug consumed worldwide and its increasing use by young women has been a great problem point out by specialists in the subject. Although the adverse effects associated to the habit of drinking alcoholic beverages during gestation being very much documented, it is known that a considerable number of pregnant women have difficulties to abandon the habit. Excessive alcohol use during pregnancy has been associated with Fetal Alcohol Syndrome (FAS) characterized by children with cognitive and behavioral disorders. However, because of denial, embarrassment and fear, maternal reports of gestational use of alcohol are often inaccurate. Consequently, a series of biomarkers have been studied to diagnose fetal exposure to alcohol. Recently, fatty acid ethyl esters (FAEE) have been studied as biomarkers found in meconium of neonates exposed in utero. In the present work, an analytical method was developed aiming the detection of eight FAEEs in meconium samples and applied to real specimens collected from newborns whose mothers admitted or not the use of alcohol during pregnancy. Headspace solid-phase microextraction (HS-SPME), a relatively recent sample preparation technique, was used for analysis. FAEEs were identified and quantified by gas chromatography/mass spectrometry (GC/MS), operated in chemical ionization mode. The corresponding deuterated ethyl esters were synthesized and used as internal standards. The lower limits of quantification (LOQ) obtained were below 150ng/g and limits of detection (LOD) were bellow 100ng/g for all analytes. The method showed good linearity in the range of concentration studied (LOQ-2000ng/g), with coefficient of linearity better than 0.98. The precision assay, given by the relative standard deviation (RSD) of the method was lower than 15% for all FAEEs studied. When the method was applied to real samples, it was possible to detect trace levels of some FAEEs from non-suspected ethanol exposed newborns.
|
62 |
Detektion von humanpathogenen Bakterien mittels Ionenmobilitätsspektrometrie im Headspace von Bakterienkolonien / Detection of human pathogenic bacteria by ion mobility spectrometry in the headspace of bacterial coloniesHofmann, Lena Kristina 25 September 2019 (has links)
No description available.
|
63 |
Prieskoninių augalų, eterinių aliejų sudėties tyrimas, panaudojant skirtingus ekstrakcijos metodus / Essential oils composition analysis in herbal spices using different extraction methodsSinkevičius, Robertas 20 June 2012 (has links)
Augant pasaulinei pramonei aplinkos tarša nepaliaujamai didėja, tad augalai augantys užterštoje aplinkoje, savo sudėtyje taip pat turi nemažai įvairių junginių, kurie gali įtakoti juos vartojančių žmonių sveikatą. Eterinių aliejų išgautų iš augalų tyrimas yra vienas iš būdų nustatant augalo kokybę, užtikrinant, kad taršalai nepateks tolesniam perdirbimui. Eteriniams aliejams išgauti yra daug būdų, kaip kad distiliacija vandens garais, šviežių aromatinių dalių išspaudimas, ekstrakcija tirpikliais, tačiau tokie išgavos būdai būdingesni išgaunant didelius kiekius, tad reikia ir daug žaliavos. Tyrimams naudojami greitesni, bei mažiau žaliavos reikalaujantys metodai, kaip, kad ekstrakcija superkritiniais skysčiais, kietafazė mikroekstrakcija bei ekstrakcija iš bandinio viršerdvės. Šio darbo tikslas - eterinių aliejų, išgautų superkritinių skysčių ekstrakcijos, kietafazės mikroekstrakcijos bei tiesioginės viršerdvės ekstrakcijos būdais, sudėties nustatymas dujų chromatografijos – masių spektroskopijos metodu. Panaudojant gautus duomenis nustatyti kuris ekstrakcijos būdas pasižymi didžiausiu efektyvumu. Duomenų tikslumo užtikrinimui bandiniai pakartotinai leisti po 3 kartus, identifikuoti junginiai tikrinti skaičiuojant kovačo retencijos indeksus ir juos lyginant su jau žinomais indeksais internetinėje bibliotekoje. Darbo metu remiantis gautais duomenimis nustatyta efektyviausias eterinių aliejų ekstrakcijos metodas, junginiai, esantys bandiniuose bei būdingųjų junginių kiekis. / As the word industry develops, the amount of wastes, that are being released in to our environment is always increasing, as a result vegetables that are growing in such a environment are also contaminated with compounds that can affect the health of people that are using them. Many methods can be used to obtain essential oils, such as distillation using water vapour, extruding from fresh fragrant, extraction using solvents, but these kind of methods are used for getting large amounts of essential oils, so staple is used. For chemical analysis faster and less staple demanding methods are used, such as, super critical fluid extraction, solid phase micro extraction or direct head space extraction. The goal of this work is to determine the composition of essential oils and to estimate witch, super critical fluid extraction, solid phase micro extraction or direct head space extraction is the best for obtaining essential oils from spice herbs. In order to secure the precision of data each sample was analyzed three times, for correct compound identification kovach retention indexes were calculated and compared with the known ones on the internet library. Using the obtained data the most effective method foe essential oils obtaining was determined, also compound composition in samples and the amount of specific compounds were analyzed.
|
64 |
Fractionation, chemical and toxicological characterization of tobacco smoke componentsKaur, Navneet 08 1900 (has links)
La fumée du tabac est un aérosol extrêmement complexe constitué de milliers de composés répartis entre la phase particulaire et la phase vapeur. Il a été démontré que les effets toxicologiques de cette fumée sont associés aux composés appartenant aux deux phases. Plusieurs composés biologiquement actifs ont été identifiés dans la fumée du tabac; cependant, il n’y a pas d’études démontrant la relation entre les réponses biologiques obtenues via les tests in vitro ou in vivo et les composés présents dans la fumée entière du tabac. Le but de la présente recherche est de développer des méthodes fiables et robustes de fractionnement de la fumée à l’aide de techniques de séparation analytique et de techniques de détection combinés à des essais in vitro toxicologiques.
Une étude antérieure réalisée par nos collaborateurs a démontré que, suite à l’étude des produits de combustion de douze principaux composés du tabac, l’acide chlorogénique s’est avéré être le composé le plus cytotoxique selon les test in vitro du micronoyau. Ainsi, dans cette étude, une méthode par chromatographie préparative en phase liquide a été développée dans le but de fractionner les produits de combustion de l’acide chlorogénique. Les fractions des produits de combustion de l’acide chlorogénique ont ensuite été testées et les composés responsables de la toxicité de l’acide chlorogénique ont été identifiés. Le composé de la sous-fraction responsable en majeure partie de la cytoxicité a été identifié comme étant le catéchol, lequel fut confirmé par chromatographie en phase liquide/ spectrométrie de masse à temps de vol.
Des études récentes ont démontré les effets toxicologiques de la fumée entière du tabac et l’implication spécifique de la phase vapeur. C’est pourquoi notre travail a ensuite été focalisé principalement à l’analyse de la fumée entière. La machine à fumer Borgwaldt RM20S® utilisée avec les chambres d’exposition cellulaire de British American Tobacco permettent l’étude in vitro de l’exposition de cellules à différentes concentrations de fumée entière du tabac. Les essais biologiques in vitro ont un degré élevé de variabilité, ainsi, il faut prendre en compte toutes les autres sources de variabilité pour évaluer avec précision la finalité toxicologique de ces essais; toutefois, la fiabilité de la génération de la fumée de la machine n’a jamais été évaluée jusqu’à maintenant. Nous avons donc déterminé la fiabilité de la génération et de la dilution (RSD entre 0,7 et 12 %) de la fumée en quantifiant la présence de deux gaz de référence (le CH4 par détection à ionisation de flamme et le CO par absorption infrarouge) et d’un composé de la phase particulaire, le solanesol (par chromatographie en phase liquide à haute performance).
Ensuite, la relation entre la dose et la dilution des composés de la phase vapeur retrouvée dans la chambre d’exposition cellulaire a été caractérisée en utilisant une nouvelle technique d’extraction dite par HSSE (Headspace Stir Bar Sorptive Extraction) couplée à la chromatographie en phase liquide/ spectrométrie de masse. La répétabilité de la méthode a donné une valeur de RSD se situant entre 10 et 13 % pour cinq des composés de référence identifiés dans la phase vapeur de la fumée de cigarette. La réponse offrant la surface maximale d’aire sous la courbe a été obtenue en utilisant les conditions expérimentales suivantes : intervalle de temps d’exposition/ désorption de 10 0.5 min, température de désorption de 200°C pour 2 min et température de concentration cryogénique (cryofocussing) de -75°C. La précision de la dilution de la fumée est linéaire et est fonction de l’abondance des analytes ainsi que de la concentration (RSD de 6,2 à 17,2 %) avec des quantités de 6 à 450 ng pour les composés de référence. Ces résultats démontrent que la machine à fumer Borgwaldt RM20S® est un outil fiable pour générer et acheminer de façon répétitive et linéaire la fumée de cigarette aux cultures cellulaires in vitro.
Notre approche consiste en l’élaboration d’une méthodologie permettant de travailler avec un composé unique du tabac, pouvant être appliqué à des échantillons plus complexes par la suite ; ex : la phase vapeur de la fumée de cigarette. La méthodologie ainsi développée peut potentiellement servir de méthode de standardisation pour l’évaluation d’instruments ou de l’identification de produits dans l’industrie de tabac. / Tobacco smoke is an extremely complex aerosol composed of thousands of constituents distributed amongst the particulate and vapor phases. Toxicological effects have been linked to compounds present in both of these phases. Many biologically active compounds have been identified within tobacco smoke; however, there is a lack of studies correlating specific in vitro or in vivo biological responses to components within whole tobacco smoke. The goal of this research was to develop reliable and robust smoke fractionation methods using analytical separation and detection techniques in combination with in vitro toxicological assays.
In a previous study by our collaborators, toxicological assessment of the particulate phase combustion products of twelve individual tobacco components revealed that the combustion products of chlorogenic acid were the most cytotoxic using the in vitro micronucleus test. Therefore, a preparative liquid chromatography method was developed in this work to fractionate the combustion products of chlorogenic acid to assess the bioactivity of these fractions and to identify the compounds responsible for the toxicity observed. The sub-fraction responsible for the most cytotoxic response comprised catechol, which was identified by liquid chromatography/time-of-flight mass spectrometry.
Emerging studies have highlighted the toxicological significance of whole tobacco smoke and specifically the vapor phase, which shifted our focus to whole smoke analyses. The Borgwaldt RM20S® smoking machine in combination with British American Tobacco’s in vitro cell exposure chamber allow for the generation of fresh cigarette smoke in various doses and delivery to cell cultures. In vitro biological assays have a high degree of variability, thus, all other sources of variability must be accounted for to accurately assess toxicological endpoints; however, the reliability of dose delivery of the instrument had not been assessed until now. We have determined the reliability (RSD from 0.7-12%) of smoke generation and dilution by quantifying two reference standard gases (CH4 by flame ionization detection and CO by infrared absorption) and the tobacco particulate phase marker, solanesol (by high performance liquid chromatography-ultraviolet absorption detection).
The relationship between dose and diluted vapor phase components found within the exposure chamber was then characterized by developing a headspace stir-bar sorptive extraction-gas chromatography/mass spectrometry method. The method repeatability gave an RSD from 10-13% for five reference compounds identified in the vapor phase of cigarette smoke. The maximal peak area response was obtained using the following experimental conditions: exposure-to-desorption time interval of 10 0.5 min, desorption temperature of 200 °C for 2 min, and a cryofocussing temperature of -75 °C. The dilution precision was found to yield a linear response of analyte abundance and was observed to be a function of concentration (RSD from 6.2-17.2 %) with quantities of 6-450 ng for the reference compounds. The findings obtained suggest the Borgwaldt RM20S® is a reliable tool to generate and deliver repeatable and linear doses of cigarette smoke to in vitro cell cultures.
Our approach began with designing the methodology to work with an individual tobacco component, which could then be applied to a more complex sample, e.g., the vapor phase of cigarette smoke. The methodology developed can potentially serve as standardized methods for the assessment of instrumentation or screening of products for the Tobacco Industry.
|
65 |
Applications of Solid-Phase Microextraction to Chemical Characterization of Materials Used in Road ConstructionTang, Bing January 2008 (has links)
Environmental and health aspects of road materials have been discussed for a long time, mostly regarding bitumen and bitumen fumes. However, just a few studies on other types of road materials have been reported. In this doctoral study, two types of materials, asphalt release agents and bituminous sealants, were investigated with regard to chemical characterization and emission profiles. Besides conventional test methods, solid-phase microextraction (SPME) technique was applied for emissions profiles screening and quantitative analysis. General description of main characteristics of asphalt release agents and bituminous sealants is given, and a comprehensive state-of-the-art on SPME technique is presented, especially on methodologies for analyzing mono- and polycyclic aromatic hydrocarbons (MAHs and PAHs) in different sample matrices. In the experimental study, chemical characterization of the two material types was performed using conventional methods, including fourier transform infrared spectroscopy - attenuated total reflectance (FTIR-ATR), gel permeation chromatography (GPC), mass spectrometry (MS) and gas chromatography – mass spectrometry (GC-MS). General patterns regarding functional groups and molecular weight distribution were studied. In the case of asphalt release agents, more detailed information on chemical compositions, especially the contents of MAHs and PAHs, was obtained. General information on emission proneness of asphalt release agents was obtained using thermogravimetric analysis (TGA) and MS. Using headspace(HS)-SPME and GC-MS, emission profiles of asphalt release agents were characterized at different temperatures, whereas the profiles of bituminous sealants were obtained solely at room temperature. The results presented were used for ranking the materials with regard to degree of total emission as well as emission of hazardous substances. The applicability of HS-SPME for quantitative analysis of MAHs in asphalt release agents and emulsion-based bituminous sealants was investigated. The use of a surrogate sample matrix was concerned, and experimental parameters influencing the HS-SPME procedure, such as equilibration and extraction time, as well as effects of sample amount and matrices, were studied. The methods were evaluated with regard to detection limit, accuracy as well as precision. Different calibration approaches including external calibration, internal calibration and standard addition were investigated. The determination of MAHs in asphalt release agents and emulsion-based bituminous sealants using HS-SPME-GC-MS was conducted. / QC 20100913
|
66 |
Fusarium species in grains : dry matter losses, mycotoxin contamination and control strategies using ozone and chemical compoundsMylona, Kalliopi January 2012 (has links)
This Project identified the relationships between storage conditions, dry matter losses (DMLs) caused by Fusarium species in cereal grains and mycotoxin contamination and assessed novel control strategies for post-harvest grain management including chemical control and ozone. F. graminearum, F. verticillioides and F. langsethiae were inoculated on wheat, maize and oats and stored under environmental conditions where marginal to optimum spoilage and mycotoxin contamination can occur. DMLs were calculated from the CO2 produced and were significantly correlated with deoxynivalenol (DON), zearalenone (ZEA), fumonisins (FUMs) and T-2 and HT-2 toxins respectively. Mycotoxin levels in wheat and maize exceeded the EU legislative limits with 0.9-1% DMLs. Therefore, CO2 monitoring during storage can indicate the level of contamination in a stored batch. Using CO2 production data at different water activity (aw) and temperature conditions, the environmental regimes at which F. langsethiae can grow and contaminate oats with T-2 and HT-2 toxins were identified for the first time. Five acids were examined in vitro and little effect was observed on Fusarium growth, in the aqueous form, while the effect on mycotoxin production varied. Dissolved in ethanol, adipic, fumaric and ferulic acids inhibited fungal growth and controlled DON and FUMs, but T-2 toxin was stimulated by the ethanol. Two garlic essential oils, propyl-propylthiosulfinate (PTS) and propyl propylthiosulfonate (PTSO) were studied for the first time. In vitro, 200 ppm reduced fungal growth (50-100%) and mycotoxin production by >90%. The efficacy was species-dependent. In naturally contaminated oats of 0.93 aw stored for 20 days, 16 ppm PTSO reduced T-2 and HT-2 toxins by 66% and ochratoxin A (OTA) by 88%, while 200 ppm PTS reduced OTA by 95%. In wheat, 100 ppm PTS reduced DON and ZEA and 300 ppm PTS reduced fumonisins by 40-80%. PTSO:PTS (1:1) at 400 and 600 ppm was very effective against DON and ZEA in wheat of 0.92 aw. Ozone (O3) exposure at 200 ppm for 30 min delayed Fusarium spore germination on media of 0.98 aw and inhibited germination at 0.94 aw. O3 was more effective against fungal spores than mycelium and little effect was observed on growing cultures. In vitro, mycotoxin production after exposure depended on the stage of life of the fungi. O3 reduced fungal populations in grains. Mycotoxin production in wet grains treated with 100-200 ppm O3 for 60 min and stored for up to 30 days was reduced or completely inhibited, depending on the species and the exposure system. Simultaneous drying of the grain due to the O3 passage was observed.
|
67 |
Fractionation, chemical and toxicological characterization of tobacco smoke componentsKaur, Navneet 08 1900 (has links)
La fumée du tabac est un aérosol extrêmement complexe constitué de milliers de composés répartis entre la phase particulaire et la phase vapeur. Il a été démontré que les effets toxicologiques de cette fumée sont associés aux composés appartenant aux deux phases. Plusieurs composés biologiquement actifs ont été identifiés dans la fumée du tabac; cependant, il n’y a pas d’études démontrant la relation entre les réponses biologiques obtenues via les tests in vitro ou in vivo et les composés présents dans la fumée entière du tabac. Le but de la présente recherche est de développer des méthodes fiables et robustes de fractionnement de la fumée à l’aide de techniques de séparation analytique et de techniques de détection combinés à des essais in vitro toxicologiques.
Une étude antérieure réalisée par nos collaborateurs a démontré que, suite à l’étude des produits de combustion de douze principaux composés du tabac, l’acide chlorogénique s’est avéré être le composé le plus cytotoxique selon les test in vitro du micronoyau. Ainsi, dans cette étude, une méthode par chromatographie préparative en phase liquide a été développée dans le but de fractionner les produits de combustion de l’acide chlorogénique. Les fractions des produits de combustion de l’acide chlorogénique ont ensuite été testées et les composés responsables de la toxicité de l’acide chlorogénique ont été identifiés. Le composé de la sous-fraction responsable en majeure partie de la cytoxicité a été identifié comme étant le catéchol, lequel fut confirmé par chromatographie en phase liquide/ spectrométrie de masse à temps de vol.
Des études récentes ont démontré les effets toxicologiques de la fumée entière du tabac et l’implication spécifique de la phase vapeur. C’est pourquoi notre travail a ensuite été focalisé principalement à l’analyse de la fumée entière. La machine à fumer Borgwaldt RM20S® utilisée avec les chambres d’exposition cellulaire de British American Tobacco permettent l’étude in vitro de l’exposition de cellules à différentes concentrations de fumée entière du tabac. Les essais biologiques in vitro ont un degré élevé de variabilité, ainsi, il faut prendre en compte toutes les autres sources de variabilité pour évaluer avec précision la finalité toxicologique de ces essais; toutefois, la fiabilité de la génération de la fumée de la machine n’a jamais été évaluée jusqu’à maintenant. Nous avons donc déterminé la fiabilité de la génération et de la dilution (RSD entre 0,7 et 12 %) de la fumée en quantifiant la présence de deux gaz de référence (le CH4 par détection à ionisation de flamme et le CO par absorption infrarouge) et d’un composé de la phase particulaire, le solanesol (par chromatographie en phase liquide à haute performance).
Ensuite, la relation entre la dose et la dilution des composés de la phase vapeur retrouvée dans la chambre d’exposition cellulaire a été caractérisée en utilisant une nouvelle technique d’extraction dite par HSSE (Headspace Stir Bar Sorptive Extraction) couplée à la chromatographie en phase liquide/ spectrométrie de masse. La répétabilité de la méthode a donné une valeur de RSD se situant entre 10 et 13 % pour cinq des composés de référence identifiés dans la phase vapeur de la fumée de cigarette. La réponse offrant la surface maximale d’aire sous la courbe a été obtenue en utilisant les conditions expérimentales suivantes : intervalle de temps d’exposition/ désorption de 10 0.5 min, température de désorption de 200°C pour 2 min et température de concentration cryogénique (cryofocussing) de -75°C. La précision de la dilution de la fumée est linéaire et est fonction de l’abondance des analytes ainsi que de la concentration (RSD de 6,2 à 17,2 %) avec des quantités de 6 à 450 ng pour les composés de référence. Ces résultats démontrent que la machine à fumer Borgwaldt RM20S® est un outil fiable pour générer et acheminer de façon répétitive et linéaire la fumée de cigarette aux cultures cellulaires in vitro.
Notre approche consiste en l’élaboration d’une méthodologie permettant de travailler avec un composé unique du tabac, pouvant être appliqué à des échantillons plus complexes par la suite ; ex : la phase vapeur de la fumée de cigarette. La méthodologie ainsi développée peut potentiellement servir de méthode de standardisation pour l’évaluation d’instruments ou de l’identification de produits dans l’industrie de tabac. / Tobacco smoke is an extremely complex aerosol composed of thousands of constituents distributed amongst the particulate and vapor phases. Toxicological effects have been linked to compounds present in both of these phases. Many biologically active compounds have been identified within tobacco smoke; however, there is a lack of studies correlating specific in vitro or in vivo biological responses to components within whole tobacco smoke. The goal of this research was to develop reliable and robust smoke fractionation methods using analytical separation and detection techniques in combination with in vitro toxicological assays.
In a previous study by our collaborators, toxicological assessment of the particulate phase combustion products of twelve individual tobacco components revealed that the combustion products of chlorogenic acid were the most cytotoxic using the in vitro micronucleus test. Therefore, a preparative liquid chromatography method was developed in this work to fractionate the combustion products of chlorogenic acid to assess the bioactivity of these fractions and to identify the compounds responsible for the toxicity observed. The sub-fraction responsible for the most cytotoxic response comprised catechol, which was identified by liquid chromatography/time-of-flight mass spectrometry.
Emerging studies have highlighted the toxicological significance of whole tobacco smoke and specifically the vapor phase, which shifted our focus to whole smoke analyses. The Borgwaldt RM20S® smoking machine in combination with British American Tobacco’s in vitro cell exposure chamber allow for the generation of fresh cigarette smoke in various doses and delivery to cell cultures. In vitro biological assays have a high degree of variability, thus, all other sources of variability must be accounted for to accurately assess toxicological endpoints; however, the reliability of dose delivery of the instrument had not been assessed until now. We have determined the reliability (RSD from 0.7-12%) of smoke generation and dilution by quantifying two reference standard gases (CH4 by flame ionization detection and CO by infrared absorption) and the tobacco particulate phase marker, solanesol (by high performance liquid chromatography-ultraviolet absorption detection).
The relationship between dose and diluted vapor phase components found within the exposure chamber was then characterized by developing a headspace stir-bar sorptive extraction-gas chromatography/mass spectrometry method. The method repeatability gave an RSD from 10-13% for five reference compounds identified in the vapor phase of cigarette smoke. The maximal peak area response was obtained using the following experimental conditions: exposure-to-desorption time interval of 10 0.5 min, desorption temperature of 200 °C for 2 min, and a cryofocussing temperature of -75 °C. The dilution precision was found to yield a linear response of analyte abundance and was observed to be a function of concentration (RSD from 6.2-17.2 %) with quantities of 6-450 ng for the reference compounds. The findings obtained suggest the Borgwaldt RM20S® is a reliable tool to generate and deliver repeatable and linear doses of cigarette smoke to in vitro cell cultures.
Our approach began with designing the methodology to work with an individual tobacco component, which could then be applied to a more complex sample, e.g., the vapor phase of cigarette smoke. The methodology developed can potentially serve as standardized methods for the assessment of instrumentation or screening of products for the Tobacco Industry.
|
68 |
Comprehensive study of the effects of formulation and processing parameters on structural and functional properties of active bio-based packaging films / Contribution à la compréhension de l'influence des paramètres de formulation et de procédé sur la structure et les propriétés fonctionnelle de films actifs à base de bio-polymères / Sveobuhvatno istraživanje utjecaja formulacije i procesnih parametara na strukturna i funkcionalna svojstva aktivnih ambalažnih biomaterijalaKurek, Mia 24 October 2012 (has links)
Cette étude porte sur l’analyse du mécanisme de transfert du carvacrol (molécule antimicrobienne volatile) au travers de films à base de chitosan. La composition, la structure, les paramètres de procédés et de séchage de la couche de chitosan ont été corrélés aux propriétés physico-chimiques et fonctionnelles des films. La compréhension de ces facteurs et de leurs influences est cruciale à l’optimisation de la production de films actifs à base de polyéthylène enduits de chitosan. En effet, composition, microstructure et condition environnementale (température, humidité) conditionnent la rétention puis la libération contrôlée du carvacrol. La présence d’humidité induit absorption, gonflement, et plastification du chitosan, et par conséquent influe sur la structure, ses propriétés thermiques et de surface. L’absorption d’humidité, due au changement de structure, entraîne une forte augmentation de la perméabilité aux gaz et à la vapeur d’eau, et favorise ainsi la libération du carvacrol, nécessaire à une efficacité antimicrobienne rapide. Cette dernière, ainsi que l’impact sensoriel sur l’aliment emballé, sont directement corrélés aux aspects cinétiques et de partage des vapeurs de carvacrol. Ces travaux ont ainsi mis en évidence l’importance le compréhension de mécanismes de transfert dans les emballages à base de bio-polymères sur leur production et application industrielles / The aim of this study is the analysis of structure and transfer mechanisms through chitosan based food packaging materials with incorporated carvacrol as a model of antimicrobial active substance. Integration of composition parameters, structure, processing and drying of chitosan systems is correlated to its physico chemical and functional properties. Understanding and detailed analyses of processing parameters is crucial in production of active chitosan coatings applied on conventional materials such as polyethylene. So, the knowledge of composition and microstructure in association to environmental conditions, control the retention and the release kinetics of carvacrol from chitosan film. Water vapour was crucial parameter that strongly influenced adsorption, swelling and plasticization of chitosan based films, as well as thermal, surface and mechanical properties. By changing the matrix structure, penetrating water molecules decreased gas barrier efficiency and increased release of carvacrol. Furthermore, release of carvacrol in the headspace was correlated to the antimicrobial efficiency and to the organoleptic impact on packed food products. Such investigation highlights the transfer mechanism within bio-based materials, prior to efficiency prediction for their industrial development.In dry conditions, all chitosan films were fairly good gas barriers (about 10 17 g/m∙s∙Pa). Chitosan coated polyethylene films were up to 10000 times less permeable than uncoated PE. Increase in the environmental humidity above 60% and up to 96% (that represents the conditions of a real fresh food packaging system), significantly increased gas permeability of all chitosan films. Mechanical tests confirmed that when relative humidity increased, structural changes were induced. Therefore, extensive water plasticization of chitosan matrix was observed.Diffusion coefficients of carvacrol from chitosan film increased up to 1000 times when humidity increased from 0% to 100%. Water vapour triggers the release of carvacrol in the vapour phase. This indicates the importance of controlling the environmental conditions in the packaging at the time of the application but also during the active film storage.Films with carvacrol concentrations in the vapour phase above 2x10-7 g/mLair were efficient against large spectrum of bacteria, including some Gram-positive bacteria, Gram-negative bacteria and fungi. In some instances the concentration that was required for carvacrol antimicrobial efficiency was not organoleptically acceptable to consumers. / Cilj ovog rada je analiza strukture i mehanizama prijenosa tvari kroz ambalažne materijale za pakiranje hrane na bazi kitozana s inkorporiranim karvakrolom kao modelnom aktivnom antimikrobnom tvari. Integrirani sastavni parametri, struktura, proizvodnja i sušenje kitozanskog sustava korelirani su sa njegovim fizikalno-kemijskim i funkcionalnim svojstvima. Razumijevanje i detaljna analiza procesnih parametara predstavlja ključan korak u proizvodnji aktivnih kitozanskih prevlaka na konvencionalnim materijaima kao što je polietilen. Dakle, poznavanje sastava i mikrostrukture u ovisnosti o okolnim uvjetima, osnovni je preduvjet za kontrolirano zadržavanje i otpuštanje karvakrola iz filmova na bazi kitozana. Vodena para predstavlja ključni parametar koji značajno utječe na adsorpciju, bubrenje i plastifikaciju kitozanskih filmova, kao i na njegova toplinska, površinska, i mehanička svojstva. Penetracijom (prodiranjem) molekula vode dolazi do promjene strukture matriksa, smanjuje se učinkovitost barijernih svojstava prema plinovima i povećava otpuštanje karvakrola. Otpuštanje karvakrola u zračnom prostoru u korelaciji je sa antimikrobnom učinkovitosti i organoleptičkim svojstvima upakiranih prehrambenih proizvoda. Ovo istraživanje prije svega naglašava značaj poznavanja mehanizma prijenosa tvari unutar biomaterijala koji je neophodan za predviđanje učinkovite primjene na industrijskoj razini
|
Page generated in 0.0325 seconds