The thesis deals with the study of the influence of concentration and different types of surfactants (Igepal CO-520, Arkopal N110, Igepal CO-890, sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, dodecyltrimethylammonium bromide and Dehyton PL) on the environmental stress cracking resistance of high-density polyethylene by means of Full Notch Creep Test. Furthermore, the influence of ligamental stress (3,5; 4,0 a 4,5 MPa), pH of the prepared active environment and type of the water used as a solvent for the surfactants on the time to failure was monitored. An accelerating effect was observed at increased concentration, stress and molecular weight. Faster failure was achieved after exposure to ionic types compared to nonionic. The rate of the notch opening was determined. The brittle and ductile behavior during the process of failure was evaluated by microscopic analysis of the morphology of the fracture surfaces. Based on the pH change after the test, the stability of the active environment was evaluated. Deteriorating quality of surfactant solutions was observed. Raman spectroscopy and Fourier transform infrared spectroscopy were used to detect the surfactant on the surface of the test specimen after the test.

Diploma thesis treat of effect of direct, alternate and pulse electrical stress on the properties surveyed electrical insulating material. Object of this experiment is crystalline high-density polystyrene QUINN PS. To monitor the stress is used the method of dielectric relaxation spectroscopy. Under examinations are the resultant dielectric spectra, which constitute the frequency dependencies of components of complex permitivity. Samples of the selected material are exposed to effects of alternate and pulse electrical stress on the different intensities of the electric field. In the direct field are then monitored absorption characteristics and specific volume resistance of the samples.

Amine groups physiologically play an important role in regulating the growth behavior of cells and they have technological advantages for the conjugation of biomolecules. In this work, we present a method to deposit a copolymerized coating of dopamine and hexamethylendiamine (HD) (PDAM/HD) rich in amine groups onto a target substrate. This method only consists of a simple dip-coating step of the substrate in an aqueous solution consisting of dopamine and HD. Using the technique of PDAM/HD coating, a high density of amine groups of about 30 nmol cm⁻² was obtained on the target substrate surface. The PDAM/HD coating showed a high cross-linking degree that is robust enough to resist hydrolysis and swelling. As a vascular stent coating, the PDAM/HD presented good adhesion strength to the substrate and resistance to the deformation behavior of compression and expansion of a stent. Meanwhile, the PDAM/HD coating exhibited good biocompatibility and attenuated the tissue response compared with 316L stainless steel (SS). The primary amine groups of the PDAM/HD coating could be used to effectively immobilize biomolecules containing carboxylic groups such as heparin. These data suggested the promising potential of this PDAM/HD coating for application in the surface modification of biomedical devices.

The study investigates the development of church infrastructure within the urban environment. A symbiotic interaction between church form and urban conditions is proposed and contextualised through analysis of existing church models and current spatial concerns within Pretoria’s inner-city. The potential of church as agent for urban renewal and community development is identified and the study generates a spatial and programmatic model aligned with the inner-city’s need for meaningful and integrated interventions. A systemic definition of church proposes a multi-layered programme based on partnership and interaction while alternative church positioning suggests the concept of re-claiming inner-city spaces, applied through the re-development of the Schubart Park housing complex. AFRIKAANS : Hierdie studie ondersoek die ontwikkeling van kerk infrastruktuur in die stedelike omgewing. ‘n Simbiotiese interaksie tussen kerkvorm en stedelike kondisies word voorgestel en gekontekstualiseer deur analise van bestaande kerk modelle en ruimtelike kwessies in die middestad van Pretoria. studie identifiseer die potensiaal van kerk as agent vir stedelike hernuwing en gemeenskapsontwikkeling en vervolgens word n ruimtelike en programmatiese model in lyn gestel met die middestad se tekort aan betekenisvolle en geintegreerde ingrypings. Sistemiese definisie van kerk stel n gelaagde program voor gebasseer op vennootskap en interaksie terwyl alternatiewe plasing van die hergebruik van stedelike ruimtes voorstel wat toegepas word deur die herontwikkeling van die Schubart Park behuisings kompleks. / Dissertation (MArch(Prof))--University of Pretoria, 2010. / Architecture / unrestricted

<p>My thesis revolves around neuronal circuit dynamics in health and disease. The first part of the thesis characterized cross-regional synchrony within the visual cortical network following visual perceptual experience in healthy mice. This work for the first time described inter-areal 4-8 Hz superficial layer LFP synchrony across mouse visual cortical regions persisting beyond visual stimulation time window, and revealed that the synchrony was expressed specifically between V1 and the higher-order visual area (HVA) with functional preference matching the entrained spatial frequency (SF) and temporal frequency (TF) content, in mice. The discovery of visual familiarity induced inter-areal 4-8 Hz synchrony extends the previous discovery of the 4-8 Hz oscillation in V1 after visual experience from our lab (Kissinger et al., 2018; Kissinger et al., 2020; Gao et al., 2021), and provided the first pivotal evidence supporting the role of 4-8 Hz oscillation in mediating cross-regional communication. Such 4-8 Hz visual cortical network synchrony has been mostly reported in primate studies in contexts of visual attention and working memory (Liebe et al., 2012; Spyropoulos et al., 2018), while our study extended the visual cortical network synchrony research scope to mouse models and in a new context of visual familiarity. The work is a key step for starting cortical network studies in mice, and for starting predictive coding theory study in the context of oscillations in mouse cortical network in the future. Additionally, unit spiking was more strongly modulated by 4-8 Hz oscillations in V1 and HVAs after visual experience. The visually-locked responsive units in V1 and HVAs exihibted either increased or decreased inter-areal spiking synchrony, while most post-stimulus responsive units in V1 and HVA exhibited higher spiking synchrony. </p> <p>The other parts of my dissertation looked at V1 activity in disease and following a novel CNS therapy. One project looked at recovery of visually evoked response in mouse V1 after ischemia through NeuroD1 mediated astrocyte-to-neuron conversion, where we characterized the formation of cortical laminated structure from the converted neurons, longitudinal recovery of visually evoked responses of unit populations in V1, and units’ selective responses to orientations. Another project looked at altered visual cortical activity in an Auxilin knockout mouse model, which demonstrated overall reduced visually evoked responses, less selective responses to orientations, impaired visual adaptive responses and mismatch responses, as well as slower visual experience induced oscillations. These projects utilized the high-density silicon probe recording technique to 1) characterize visual cortical function recovery following a therapy, which provided evidence for its high efficacy for recovering physiological functions, and to 2) phenotype visual cortical functional impairments in a mouse disease model, which provided more basic understanding in visual cortical physiology of Auxilin related disease.</p> <p>In sum, my dissertation work took advantage of the high-density silicon probe recording technique to probe neuronal circuits in health and disease. The discovery of visual experience induced inter-areal 4-8 Hz synchrony paves the way for studying 4-8 Hz activity in relation to stream-dependent visual processing and predictive coding in health and disease.</p>

Interest about living in the city is increasing and people look suitable sites for newconstruction. Boundary of these good places expand into the landscape. Undeveloped areas have become valuable goods and it is important to build up the appropriate form of building with critical density, which will provide new space for living, but also contribute to raising living standards and it elevate all surrounding area. Variable and flexible solution of my architectural and urban design fights with evacuation people into urban sprawl and try put there quality housing to the city center and try to be a timeless concept,which will be able to respond to different human rights requirements and wishes. The built up area will be created by grouping the proposed houses and residential houses into blocks. Individual detached houses are designed in a range of four sizes for satisfy of people who require small houses and for people which findmore comfortable living. Different sizes of houses could satisfy both seniors and young couples and families with children and the solution ensure local settlement by people of all ages and this creates a healthy demographers structure for place.

No description available.

No description available.

No / The advances of the polymer melt flow-induced crystallization behaviour and its influence on mechanical properties of high density polyethylene (HDPE) in micron injection (MI) were studied in the present paper. Analysis of mechanical performance, including yield stress and elongation at break, for samples adopted from different regions in a molded plaque showed that a higher injection speed, a higher mold temperature and a longer cooling time could effectively enhance the yield stress but negatively promoted the ductility. Then, the mechanisms of such variation of mechanical performance and the factors affecting it were investigated by means of differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and polarized light microscopy (PLM). The super high shear rate during cavity feeding in MI molding not only induced a typical three-layered structure but also developed a highly oriented fibrously morphological structure in the skin layer. However, such fully oriented morphology was much negative in the interlayer and even could not be observed in the core layer. The results from SEM and PLM observations indicated that the orientation morphology varied significantly through the plaque's cross-section and thickness of the each layer changed with the process parameters and geometric position, and finally led to variation of the mechanical performance.

<p> The effect of capillary dimensions on the die swell of molten polymers is investigated. Low and high density polyethylene, polypropylene, polystyrene are used to make investigation It is found the die swell decreases vii th L/D. The plot of die swell index (d/D) vs. L/D has the shape of anexponential decay curve. </p> <p> Bagley's decaying equation is used to fit the data. The effect of Deborah number on die swell phenomenon is also studied. 'I'he relationship between the recoverable shear strains of infinitely long capillary and the one with dimensions ratio L/D is obtained. This relationship could be used to estima te the die swell of short capillary from its value at equilibrium and polymer characteristics. </p> / Thesis / Master of Engineering (MEngr)