Thesis (Ph. D.)--University of Wisconsin--Madison, 1934. / Typescript. Includes bibliographical references.

Deep geological repository has been investigated as a solution for long term storage of spent nuclear fuel in Sweden for more than 40 years now. The Swedish nuclear fuel and waste management company (SKB) are commissioning the deep repository and they must ensure that nuclear waste is isolated from the environment for thousands of years. During this time the containment must withstand physical stress and corrosion. It is important for a safety analysis to determine the different reactions that could occur during this time. If the physical barriers break down, radiolysis of water will occur. Hydrogen peroxide formed during the radiolysis can oxidize the exposed surface of the fuel, which increases the dissolution of radiotoxic products. Hydrogen peroxide can also catalytically decompose on the surfaces of the fuel. This project set out to figure out the selectivity for catalytic decomposition of hydrogen peroxide. This was to be done analytically with coumarin as a scavenger for detecting hydroxyl radicals formed when hydrogen peroxide decomposes. This produces the fluorescent 7-hydroxycoumarin that with high precision could be measured using spectrofluorometry. The results were giving approximately 0.16% ratio between •OH-production and hydrogen peroxide consumption. Similar experiments were done with ZrO2 for comparison, but the results were largely inconclusive. The effect of bicarbonate (a groundwater constituent) was also investigated. Adding bicarbonate increased the reproducibility of the experiments and increased the dissolution of uranium. Both the uranium and the bicarbonate increased the screening effects which minimized the fluorescent signal output by the 7-hydroxycoumarin. / Geologiskt djupförvar av förbrukat kärnbränsle har undersökts som lösning i Sverige i över 40 år nu. Svensk kärnbränslehantering (SKB) driftsätter det geologiska djupförvaret och måste säkerställa att det förbrukade kärnbränslet hålls isolerat från omgivningen i tusentals år. Under denna tid måste förseglingen stå emot fysikalisk stress och korrosion. Det är därför viktigt för en säkerhetsanalys att undersöka de olika reaktioner som kommer ske. Om förseglingen bryts ned kommer kärnbränslet i kontakt med vattnet i berggrunden vilket leder till radiolys av vatten. Väteperoxid som skapas under radiolysen kan sedan oxidera den exponerade ytan av kärnbränslet, detta ökar upplösningen av radiotoxiska produkter. Väteperoxiden kan även katalytisk sönderdelas på kärnbränslets yta. Syftet med arbetet var att få fram selektiviteten för katalytisk sönderdelning av väteperoxid. Detta skulle uppnås analytiskt med kumarin som avskiljare för detektion av hydroxylradikaler som bildas när väteperoxid sönderdelas. Detta producerade det fluorescerande 7-hydroxykumarinet som med hög precision kunde mätas spektrofluorometriskt. Resultaten gav en ca 0,16% förhållande mellan •OH-produktion och väteperoxidkonsumtion. Likartade experiment gjordes med ZrO2 för jämförelse men resultaten var ofullständiga. Effekten av bikarbonat (en beståndsdel i grundvatten) undersöktes också. Genom addition av bikarbonat ökade experimentens reproducerbarhet och ökade även upplösningen av uran. Både uranet och bikarbonaten minskade den utgående fluorescerande signalen från 7-hydroxykumarinet.

This dissertation discusses the influence of nitrogen doping (N-doping) on the electronic and catalytic properties of carbon nanotubes (CNTs). These properties have been studied using a variety of techniques, in order to both qualitatively and quantitatively analyze the relationship between the nitrogen concentration and observed properties. Chapter 1 provides a general overview of CNTs and N-doping and details some of the previous research from our group. Chapter 2 discusses the assembly and characterization of free-standing electrode mats, which are used in order to understand the intrinsic physicochemical properties of the material without relying on the secondary influence of another conductive support. Raman microscopy, X-Ray photoelectron spectroscopy, scanning and scanning-tunneling electron microscopy, as well as electrochemical methods were all used to demonstrate the viability of the mat electrodes for further experiments. Chapter 3 addresses the examination of a range of nitrogen concentrations in order to better understand the effects of nitrogen concentration on the electrochemical and electrical properties such as the differential capacitance, density of states at the Fermi level (D(E[subscript F])), bulk conductivity and work function. These properties were studied using a variety of techniques, including UV-photoelectron spectroscopy, electrochemical impedance spectroscopy and conductive four point probe. Chapter 4 investigates the inherent catalysis of the nitrogen doped CNTs (N-CNTs) with respect to O2 reduction, and a complex mechanism is proposed. Electrochemical methods such as cyclic and linear sweep voltammetries as well as thermo-gravimetric analysis and gasometric analysis were all employed to determine heterogeneous decomposition rates as well as to detect intermediates of the O₂ reduction reaction. Chapter 5 discusses the electrocatalytic degradation of free cyanide (CN⁻) at the N-CNT mat electrodes. These results both provide further support for the mechanism discussed in Chapter 4, and present the opportunity for a potential application of N-CNTs for environmental purposes. Specifically, spectroscopic and electrochemical methods, in conjunction with theoretical models show both that the presence of CN⁻ does not inhibit O2 reduction, and that it can be effectively converted to cyanate (OCN⁻) at the N-CNT electrodes. Future work involving the assembly and characterization of transparent N-CNT films is discussed in Chapter 6. / text

The disproportionation of H₂O₂ to H₂O and molecular O₂ catalyzed by platinum nanocatalysts is technologically very important in several energy conversion technologies, such as steam propellant thrust applications and hydrogen fuel cells. However, the mechanism of H₂O₂ decomposition on platinum has been unresolved for more than 100 years and the kinetics of this reaction were poorly understood. Our goal was to quantify the effect of reaction conditions and catalyst properties on the decomposition of H₂O₂ by platinum nanocatalysts and determine the mechanism and rate-limiting step of the reaction. To this end, we have characterized two commercial platinum nanocatalysts, known as platinum black and platinum nanopowder, and studied the effect of different reaction conditions on their rates of H₂O₂ decomposition. These samples have different particle size and surface chemisorbed oxygen abundance, which were varied further by pretreating both samples at variable conditions. The rate of H₂O₂ decomposition was studied systematically as a function of H₂O₂ concentration, pH, temperature, particle size and surface chemisorbed oxygen abundance. The mechanism of H₂O₂ decomposition on platinum proceeds via two cyclic oxidation-reduction steps. Step 1 is the rate limiting step of the reaction. Step 1: Pt + H₂O₂ → H₂O + Pt(O). Step 2: Pt(O) + H₂O₂ → Pt + O₂ + H₂O. Overall: 2 H₂O₂ → O₂ + 2 H₂O. The decomposition of H₂O₂ on platinum follows 1st order kinetics in terms of H₂O₂ concentration. The effect of pH is small, yet statistically significant. The rate constant of step 2 is 13 times higher than that of step 1. Incorporation of chemisorbed oxygen at the nanocatalyst surface resulted in higher initial rate of H₂O₂ decomposition because more sites initiate their cyclic process in the faster step of the reaction. Particle size does not affect the kinetics of the reaction. This new molecular-scale understanding of the decomposition of H₂O₂ by platinum is expected to help advance many energy technologies that depend on the rate of H₂O₂ decomposition on nanocatalysts of platinum and other metals. / Ph. D. / Platinum nanomaterials are indispensable to catalyze a variety of industrial and technological processes ranging from catalytic conversion of carbon monoxide (CO), hydrocarbons, and nitrogen oxides (NO_x) in modern automobiles to energy production by hydrogen fuel cells and thrust generation in steam propellers. These technological innovations have a tremendous impact in modern society, including the areas of transportation, energy supply, soil and water quality, environmental remediation and global climate change. The decomposition of hydrogen peroxide (H₂O₂) to water (H₂O) and oxygen (O₂) on platinum nanomaterials is of particular importance because it affects the efficacy of many technological applications, such as hydrogen peroxide steam propellers and hydrogen fuel cells. However, the reaction pathway and kinetics of H₂O₂ decomposition on platinum were only partly understood. My goal was to understand how the reaction conditions and the nanocatalyst properties control the mechanism and kinetics of platinum-catalyzed hydrogen peroxide decomposition. To do that we characterized the atomic scale structural and chemical properties of two different platinum nanocatalysts, known as platinum black and platinum nanopowder and evaluated the effect of their properties in their catalytic activity. Our characterization studies were used to understand the reactivity of these two platinum nanocatalysts in the decomposition of H₂O₂, which we evaluated separately in laboratory studies. Establishing relationships between the catalyst properties and their activity, as we have done in this work for platinum nanocatalysts in the decomposition of hydrogen peroxide, has the potential to improve nanocatalyst design and performance for those applications.

La cinétique lente de la réduction de l’oxygène (ORR) est en grande partie responsable de la perte d’énergie de nombreux systèmes de conversion tels que les piles à combustible. Parmi les possibles catalyseurs de l’ORR, les oxydes de type pérovskite sont des candidats prometteurs en milieu alcalin. La présente thèse est consacrée à l’étude de l’activité, du mécanisme et de la stabilité de pérovskites à base de Co et Mn pour l’ORR. Grâce aux techniques d’électrode tournante à disque et disque-anneau (R(R)DE), les études de l’ORR et des transformations d’HO2- sur les couches minces de pérovskite/carbone dans une solution de NaOH ont montré qu’O2 est réduit en OH- via un mécanisme « en série » avec formation d’HO2- intermédiaire. Pour des quantités d’oxyde suffisantes, HO2- est ensuite réduit, ce qui résulte en un mécanisme apparent de 4 électrons. Dans ces électrodes, le carbone joue un double rôle. Il augmente l’activité électrocatalytique en améliorant le contact électrique et il est impliqué dans le mécanisme de l’ORR en catalysant la réduction d’O2 en HO2-, surtout pour les pérovskites à base de cobalt qui sont considérablement moins actives que celles à base de Mn. Néanmoins, l’électrocatalyse de l’ORR semble dégrader les sites actifs des pérovskites. / The sluggish kinetics of the oxygen reduction reaction (ORR) is largely responsible for the energy losses in energy conversion systems such as fuel cells. Among possible inexpensive catalysts for the ORR, perovskite oxides are promising electrocatalysts in alkaline media. The present thesis is devoted to the investigation of the ORR activity, mechanism and stability of some Co and Mn-based perovskites. The rotating (ring) disk electrode (R(R)DE) studies of the ORR and the HO2- transformations on perovskite/carbon thin layers in NaOH electrolyte prove that O2 is reduced to OH- via a “series” pathway with the HO2- intermediate. For high oxide loadings, the formed HO2- species are further reduced to give a global 4 electron pathway. In these electrodes, carbon plays a dual role. It increases the electrocatalytic activity by improving the electrical contact and it is involved in the ORR mechanism by catalyzing the reduction of O2 into HO2-, especially for Co-based perovskites which display lower reaction rates than Mn-based perovskites.