Two new mesoporous metal–organic frameworks (DUT-75 and DUT-76) with exceptional ethene uptake were obtained using carbazole dicarboxylate based metal–organic polyhedra as supermolecular building blocks. The compounds have a total pore volume of 1.84 and 3.25 cm³ gˉ¹ and a specific BET surface area of 4081 and 6344 m² gˉ¹, respectively, and high gas uptake at room temperature and high pressure.

Using an optimized KOH activation procedure we prepared highly porous graphene scaffoldmaterials with SSA values up to 3400m² g⁻¹ and a pore volume up to 2.2 cm³ gˉ¹, which are among the highest for carbon materials. Hydrogen uptake of activated graphene samples was evaluated in a broad temperature interval (77–296 K). After additional activation by hydrogen annealing the maximal excess H2 uptake of 7.5 wt% was obtained at 77 K. A hydrogen storage value as high as 4 wt% was observed already at 193 K (120 bar H₂), a temperature of solid CO₂, which can be easily maintained using common industrial refrigeration methods.

A multi-functional RuO₂ nanoparticle-embedded mesoporous carbon-coated separator is used as an electrocatalytic and adsorbing polysulphide-net to enhance the redox reaction of migrating polysulphides, to improve active material utilization and boost the electrochemical performance of lithium–sulphur batteries.

Removing NO from the air with a reusable material at room temperature is challenging. In this study, a series of urea–MnOₓ/ACF and urea–x(CeO₂–(1 − x)MnO₂)/ACF materials were prepared and used for removing NO at room temperature. The results showed that 10% urea–8% (0.5CeO₂–0.5MnO₂)/ACF yielded the highest NO conversion, which showed an NO conversion ratio above 90% with 1000 ppm NO in the initial mixed gases. Moreover, the NO conversion exceeded 98% when the NO concentration was 100 ppm in the initial mixed gases. More importantly, 10% urea–8% (0.5CeO2–0.5MnO₂)/ACF was stable even after it was regenerated by reloading with urea, demonstrating that the material could be easily reused and its highperformance was maintained. Finally, the mechanism and kinetics of the NO removal was discussed.

This article presents a facile and effective approach for synthesizing three-dimensional (3D) graphenecoupled Schiff-base hierarchically porous polymers (GS-HPPs). The method involves the polymerization of melamine and 1,4-phthalaldehyde, yielding Schiff-base porous polymers on the interconnected macroporous frameworks of 3D graphene aerogels. The as-synthesized GS-HPPs possess hierarchically porous structures containing macro-/meso-/micropores, along with large specific surface areas up to 776 m² g⁻¹ and high nitrogen contents up to 36.8 wt%. Consequently, 3D nitrogen-enriched hierarchically porous carbon (N-HPC) materials with macro-/meso-/micropores were obtained by the pyrolysis of the GS-HPPs at a high temperature of 800 °C under a nitrogen atmosphere. With a hierarchically porous structure, good thermal stability and a high nitrogen-doping content up to 7.2 wt%, the N-HPC samples show a high specific capacitance of 335 F g⁻¹ at 0.1 A g⁻¹ in 6 M KOH, a good capacitance retention with increasing current density, and an outstanding cycling stability. The superior electrochemical performance means that the N-HPC materials have great potential as electrode materials for supercapacitors.

Since a large number of polar and often ionizable anthropogenic organic trace compounds, such as pharmaceutical residues, can be detected in various stages of the water cycle, there is a need to elucidate the effects and behavior of such substances in the aquatic environment. Despite the fact that numerous studies on the sorption behavior of ionizable organic trace compounds have already been carried out, reliable sorption models, which allow a sufficiently accurate prediction of the sorption of organic cations, are not yet available. For this reason, the general objective of this thesis was to improve the fundamental process understanding of the interactions between dissolved cationic organic substances and solid surfaces including relevant influence parameters. The investigations were based on a differentiated process consideration in order to ultimately provide the essential prerequisites for a future reliable prediction of the sorption behavior of cationic organic compounds. Due to the complex superposition of several mechanisms, the basic relationships cannot be clearly elucidated with heterogeneous sorbents. Therefore, it was consciously worked with largely homogeneous, synthetic sorbents. The use of well-defined sorbents with different properties as well as the variation of background electrolyte concentration and the targeted use of different sorbates were the 'tools' that were used to identify and to separate the underlying sorption processes. / Da eine Vielzahl polarer und oftmals ionisierbarer anthropogener organischer Spurenstoffe, wie z. B. Pharmakarückstände, in verschiedenen Bereichen des Wasserkreislaufes nachweisbar ist, besteht die Notwendigkeit die Wirkung und das Verhalten solcher Spurenstoffe in der Umwelt näher aufzuklären. Trotz der Tatsache, dass bereits zahlreiche Untersuchungen zum Sorptionsverhalten ionisierbarer organischer Spurenstoffe bestehen, sind zuverlässige prognosefähige Sorptionsmodelle, welche eine ausreichend genaue Vorhersage der Sorption von organischen Kationen ermöglichen, zurzeit noch nicht verfügbar. Das generelle Ziel dieser Arbeit bestand daher darin, das grundlegende Prozessverständnis der Wechselwirkungen zwischen gelösten kationischen organischen Substanzen und festen Oberflächen einschließlich relevanter Einflussgrößen zu verbessern. Die Untersuchungen basierten auf einer differenzierten Prozessbetrachtung, um letztlich die wesentlichen Voraussetzungen für eine zukünftig zuverlässige Prognose des Sorptionsverhaltens kationischer organischer Verbindungen zu liefern. Aufgrund der komplexen Überlagerung mehrerer Mechanismen können die grundlegenden Zusammenhänge mit heterogen zusammengesetzten natürlichen Sorbentien nicht eindeutig aufgeklärt werden. Daher wurde bewusst mit weitgehend homogenen, synthetischen Sorbentien gearbeitet. Die Verwendung wohldefinierter Sorbentien mit unterschiedlichen Eigenschaften sowie die Variation der Elektrolytkonzentration und der gezielte Einsatz verschiedener Sorptive waren die 'Werkzeuge', die verwendet wurden, um die zugrunde liegenden Sorptionsprozesse zu identifizieren und zu separieren.

Supercapacitors have aroused considerable attention due to their high power capability, which enables charge storage/output in minutes or even seconds. However, to achieve a high energy density in a supercapacitor has been a long‐standing challenge. Here, graphite is reported as a high‐energy alternative to the frequently used activated carbon (AC) cathode for supercapacitor application due to its unique Faradaic pseudocapacitive anion intercalation behavior. The graphite cathode manifests both higher gravimetric and volumetric energy density (498 Wh kg−1 and 431.2 Wh l−1) than an AC cathode (234 Wh kg−1 and 83.5 Wh l−1) with peak power densities of 43.6 kW kg−1 and 37.75 kW l−1. A new type of Li‐ion pseudocapacitor (LIpC) is thus proposed and demonstrated with graphite as cathode and prelithiated graphite or Li4Ti5O12 (LTO) as anode. The resultant graphite–graphite LIpCs deliver high energy densities of 167–233 Wh kg−1 at power densities of 0.22–21.0 kW kg−1 (based on active mass in both electrodes), much higher than 20–146 Wh kg−1 of AC‐derived Li‐ion capacitors and 23–67 Wh kg−1 of state‐of‐the‐art metal oxide pseudocapacitors. Excellent rate capability and cycling stability are further demonstrated for LTO‐graphite LIpCs.

The application of electrochemical methods for the characterization of colloidal quantum dots (QDs) attracts considerable attention as these methods may allow for monitoring of some crucial parameters, such as energetic levels of conduction and valence bands as well as surface traps and ligands under real conditions of colloidal solution. In the present work we extend the applications of cyclic voltammetry (CV) to in situ monitoring of degradation processes of water-soluble CdTe QDs. This degradation occurs under lowering of pH to the values around 5, i.e. under conditions relevant to bioimaging applications of these QDs, and is accompanied by pronounced changes of their photoluminescence. Observed correlations between characteristic features of CV diagrams and the fluorescence spectra allowed us to propose mechanisms responsible for evolution of the photoluminescence properties as well as degradation pathway of CdTe QDs at low pH.

Recent experimental advances for the fabrication of various borophene sheets introduced new structures with a wide range of applications. Borophene is the boron atom analogue of graphene. Borophene exhibits various structural polymorphs all of which are metallic. In this work, we employed first-principles density functional theory calculations to investigate the mechanical properties of five different single-layer borophene sheets. In particular, we analyzed the effect of the loading direction and point vacancy on the mechanical response of borophene. Moreover, we compared the thermal stabilities of the considered borophene systems. Based on the results of our modelling, borophene films depending on the atomic configurations and the loading direction can yield a remarkable elastic modulus in the range of 163–382 GPa nm and a high ultimate tensile strength from 13.5 GPa nm to around 22.8 GPa nm at the corresponding strain from 0.1 to 0.21. Our study reveals the remarkable mechanical characteristics of borophene films.

In der vorliegenden Arbeit wird die Konzeptionierung und die Realisierung eines teilkontinuierlichen Thermolyseverfahrens zur rohstofflichen Verwertung von Polyethylen- und Polypropylenabfällen beschrieben. Die Ausführung in der zweistufigen Rührkesselkaskade gewährleistete dabei die Trennung der Prozessschritte Schmelzen sowie Cracken der Einsatzmaterialien, woraus ein Thermolyseöl hervorging, welches weitestgehend frei von den Verunreinigungen aus den Abfällen war. Das Thermolyseöl wies eine Zusammensetzung aus Benzin- und Dieselkomponenten auf und erfüllte einige entscheidende Kraftstoffkriterien. Zur Senkung der qualitätsmindernden Olefingehalte wurden in einem weiteren Teil dieser Arbeit Untersuchungen zur heterogen-katalysierten Hydrierung der Siedeschnitte im Schüttgutreaktor und im Rührautoklav durchgeführt. Dabei konnten die Olefingehalte durch den Einsatz eines Palladium-Platin-Trägerkatalysators sowie durch einen Nickel-Gerüstkatalysator maßgeblich gesenkt werden. Als unerwünschtes Nebenprodukt des Thermolyseprozesses resultierte ein geringer Anteil Koks, welcher in der Schmelze akkumulierte und sich teilweise an der Reaktorwand ablagerte. Die entstandenen Mengen wiesen eine Abhängigkeit von der Prozesstemperatur und -dauer auf und mussten aus dem Prozess geschleust werden. Als weitere Nebenprodukte traten ein leichtflüchtiges Spaltgas sowie ein Sumpfrückstand auf. Darüber hinaus wurde gezeigt, dass die aufzuwendende Energie für den Thermolyseprozess durch die Energiegehalte der Nebenprodukte gedeckt werden kann. Neben dem Einsatz als Kraftstoff empfahl sich das Thermolyseöl aufgrund seiner physikalischen und chemischen Eigenschaften gerade im Hinblick auf einen nachhaltigen Umgang mit Ressourcen als beachtenswerter Ersatz für fossiles Rohöl.