Το ετεροτριμερές πρωτεϊνικό σύμπλεγμα IPP (ILK-PINCH-Parvin) εντοπίζεται στις εστιακές συνδέσεις και ρυθμίζει την σηματοδότηση από την εξωκυττάρια ουσία μέσω ιντεγκρινών και αυξητικών παραγόντων, αλληλεπιδρώντας με τον κυτταροσκελετό ακτίνης και με ποικίλες σηματοδοτικές οδούς. Οι πρωτεΐνες του συμπλεγματος IPP ελέγχουν σημαντικές κυτταρικές λειτουργίες όπως ο πολλαπλασιασμός, η επιβίωση, η κυτταρική κίνηση-μετανάστευση και ενέχονται σημαντικά στην καρκινογένεση (Legate et al., 2006). Συγκεκριμένα η πρωτεΐνη ILK (integrin-linked kinase) έχει συσχετιστεί με την εξέλιξη-προαγωγή του όγκου και δυσμενή πρόγνωση στο μη μικροκυτταρικό καρκίνωμα του πνεύμονα (Ζhao et al., 2013). Η πρωτεΐνη Ras supressor protein 1 (Rsu-1), γνωστή για την ογκοκατασταλτική της δράση και την συμμετοχή της στη σηματοδοτική οδό του ογκογονιδίου Ras, πρόσφατα βρέθηκε οτι αλληλεπιδρά με την πρωτεΐνη PINCH του ΙPP συμπλέγματος και μέσω αυτής της αλληλεπίδρασης ρυθμίζει διεργασίες όπως η κυτταρική μετανάστευση και διήθηση(Gonzalez-Nieves et al., 2013). Σκοπός της παρούσας μελέτης είναι η διερεύνηση του ρόλου του IPP συμπλέγματος και της πρωτεΐνης Rsu-1 στο μη μικροκυτταρικό καρκίνωμα του πνεύμονα στον άνθρωπο καθώς και της συμμετοχής του ΙPP συμπλόκου στην σηματοδότηση από το ογκογονιδίο Ras. Για το σκοπό αυτό μελετάται η πρωτεϊνική έκφραση των ILK, PINCH, α-Parvin, β- Parvin και Rsu-1 1) σε ιστικά δείγματα μη-μικροκυτταρικού καρκινώματος του πνεύμονα σε σχέση με κλινικοπαθολογοανατομικές παραμέτρους της νόσου και 2) σε καρκινικές κυτταρικές σειρές με διαφορετικά επίπεδα ενεργοποίησης της Ras σηματοδότησης. Για τα στοιχεία του ΙΡΡ συμπλέγματος παρατηρήθηκε αυξημένη ανοσοϊστοχημική έκφραση ενώ για την πρωτεΐνη Rsu1 βρέθηκε μειωμένη στα μη μικροκυτταρικά καρκινώματα του πνεύμονα σε σχέση με το μη νεοπλασματικό παρέγχυμα του πνεύμονα. Η έκφραση των ILK και PARVA ήταν σημαντικά υψηλότερη στα χαμηλής διαφοροποίησης νεοπλάσματα και σε όγκους προχωρημένου pT αντίστοιχα. Η έκφραση της πρωτεΐνης PINCH σχετίστηκε στατιστικώς σημαντικά με την παρουσία λεμφαδενικών μεταστάσεων. Δεν παρατηρήθηκε εξάρτηση της πρωτεϊνικής έκφρασης των Rsu-1 και PINCH από τη σηματοδοτική οδό Ras. Τα αποτελέσματα υποστηρίζουν ότι η υπερέκφραση των στοιχείων του ΙΡΡ συμπλέγματος και η μειωμένη έκφραση του Rsu1 ενέχονται στην παθογένεια του καρκίνου του πνεύμονα. / The integrin-linked kinase (ILK)-PINCH-parvin (IPP) complex at integrin adhesion sites is a critical regulator of cell migration, invasion and metastasis. Deregulation of the IPP complex has been implicated in human carcinogenesis (Legate et al, 2006). Recent observations suggest that RSU-1, a protein first identified as a suppressor of v-Ras mediated cell transformation is a PINCH-binding partner that regulates PINCH mediated adhesion and migration (Gonzalez-Nieves et al., 2013). This study aims to evaluate the expression of the IPP complex and RSU-1 in human non-small cell lung carcinomas (NSCLC). Protein expression of ILK, PINCH, alpha-parvin, beta-parvin and RSU-1 in relation to clinicopathological parameters was evaluated by immunohistochemistry in 82 FFPE tissue samples of non-small cell lung cancer (NSCLC). All components of the IPP complex were overexpressed while RSU-1 was downregulated in lung cancer cells compared to non-neoplastic lung parenchyma. ILK and alpha-parvin expression was significantly higher in high grade (p=0.002) and high pT (p=0.047) tumors respectively. Expression of PINCH associated significantly with lymph node metastasis (p=0.045). Our results suggest that overexpression of the IPP complex and downregulation of RSU-1 may be implicated in lung carcinogenesis.

Integrins are heterodimeric transmembrane receptors composed of an α and a β subunit, that are expressed on the surface of all metazoan cells. These bidirectional signaling molecules are involved in many well-known aspects of cell function, although the role of integrins in early embryonic development remains a mystery. The purpose of this study was to characterize S. purpuratus integrins and determine if they are necessary for early embryonic development. Full length cDNA sequences for four incomplete gene predictions, αC, αD, αF, and βD, were determined by amplifying overlapping fragments and sequencing EST clones. Each cDNA has a single open reading frame predicting a protein with canonical integrin features. QPCR results show αC, αD, and βD are expressed in the embryo at relatively constant levels during the first 96 hours of development. αF is expressed in blastulae, during morphogenesis and tissue differentiation, at up to 35 times the levels of mRNA in the egg. Using a morpholino antisense oligonucleotide to block translation of αC results in a higher than normal mortality rate (57.1%) by 24 hours of development and 36.7% of embryos during this period have defects in aspects of cell division. These results indicate that αC is an essential gene for early development and that it may function in coordination of mitosis and cytokinesis. The expression of multiple subunits and the demonstration that αC has an essential role suggests that there are several non-overlapping functions for integrins in early embryonic development.

The interaction of materials with biological systems is of critical importance to a vast number of applications from medical implants, tissue engineering scaffolds, blood-contacting devices, cell-culture products, as well as many other products in industries as diverse as agriculture. This thesis describes a method for the modification of biomaterial surfaces and the generation of tissue engineering scaffolds that utilises the self assembly of poly (styrene)-block-poly (ethylene oxide) (PS-PEO) block copolymers. Block copolymers consist of alternating segments of two or more chemically distinct polymers. The salient feature of these materials is their ability to self organise into a wide range of micro-phase separated structures generating patterned surfaces that have domain sizes in the order of 10-100nm. Further, it is also possible to specifically functionalise only one segment of the block copolymer, providing a means to precisely locate specific biological signals within the 10-100nm domains of a nano-patterned surface, formed via the programmed micro-phase separation of the block copolymer system. The density and spatial location of signalling molecules can be controlled by altering several variables, such as block length, block asymmetry, as well as processing parameters, providing the potential to authentically emulate the cellular micro to nano-environment and thus greatly improving on existing biomaterial and tissue engineering technologies. This thesis achieved several aims as outlined below; Developed methods to control the self-assembly of PS-PEO block copolymers and generate nano-patterned surfaces and scaffolds with utility for biomaterials applications. PS-PEO diblock copolymers were blended with polystyrene (PS) homopolymer and spin cast, resulting in the rapid self-assembly of vertically oriented PEO cylinders in a matrix of PS. Due to the kinetically constrained phase-separation of the system, increasing addition of homopolymer is shown to reduce the diameter of the PEO domains. This outcome provides a simple method that requires the adjustment of a single variable to tune the size of vertically oriented PEO domains between 10-100nm. Polymeric scaffolds for tissue engineering were manufactured via a method that combines macro-scale temperature induced phase separation with micro-phase separation of block copolymers. The phase behaviour of these polymer-solvent systems is described, and potential mechanisms leading to this spectacular structure formation are presented. The result is highly porous scaffolds with surfaces comprised of nano-scale self-assembled block copolymer domains, representing a significant advance in currently available technologies. Characterised the properties of these unique nano-structured materials as well as their interaction with proteinaceous fluids and cells. Nano-patterned PS-PEO self-assembled surfaces showed a significant reduction in protein adsorption compared to control PS surfaces. The adhesion of NIH 3T3 fibroblast cells was shown to be significantly affected by the surface coverage of PEO nano-domains formed by copolymer self-assembly. These nano-islands, when presented at high number density (almost 1000 domains per square micron), were shown to completely prevent cellular attachment, even though small amounts of protein were able to bind to the surface. In order to understand the mechanism by which these surfaces resisted protein and cellular adsorption we utilised neutron reflection to study their solvation and swelling properties. The results indicate that the PEO domains are highly solvated in water; however, the PEO chains do not extend into the solvent but remain in their isolated domains. The data supports growing evidence that the key mechanism by which PEO prevents protein adsorption is the blocking of protein adsorption sites. Control the nano-scale presentation of cellular adhesion and other biological molecules via the self-assembly of functionalised PS-PEO block copolymers Precise control over the nano-scale presentation of adhesion molecules and other biological factors represents a new frontier for biomaterials science. Recently, the control of integrin spacing and cellular shape has been shown to affect fundamental biological processes, including differentiation and apoptosis. We present the self-assembly of maleimide functionalised PS-PEO copolymers as a simple, yet highly precise method for controlling the position of cellular adhesion molecules. By controlling the phase separation of the functional PS-PEO block copolymer we alter the nano-scale (on PEO islands of 8-14 nm in size) presentation of the adhesion peptide, GRGDS, decreasing lateral spacing from 62 nm to 44 nm and increasing the number density from ~ 450 to ~ 900 islands per um2. The results indicate that the spreading of NIH-3T3 fibroblasts increases as the spacing between islands of RGD binding peptides decreases. Further, the same functional PS-PEO surfaces were utilised to immobilise poly-histidine tagged proteins and ECM fragments. The technologies developed in this thesis aim to improve on several weaknesses of existing biomaterials, in particular, directing cellular behaviour on surfaces, and within tissue engineering scaffolds, but also, on the prevention of fouling of biomaterials via non-specific protein adsorption. The application of block copolymer self-assembly for biomaterial and tissue engineering systems described in this thesis has great potential as a platform technology for the investigation of fundamental cell-surface and protein-surface interactions as well as for use in existing and emerging biomedical applications.

The interaction of materials with biological systems is of critical importance to a vast number of applications from medical implants, tissue engineering scaffolds, blood-contacting devices, cell-culture products, as well as many other products in industries as diverse as agriculture. This thesis describes a method for the modification of biomaterial surfaces and the generation of tissue engineering scaffolds that utilises the self assembly of poly (styrene)-block-poly (ethylene oxide) (PS-PEO) block copolymers. Block copolymers consist of alternating segments of two or more chemically distinct polymers. The salient feature of these materials is their ability to self organise into a wide range of micro-phase separated structures generating patterned surfaces that have domain sizes in the order of 10-100nm. Further, it is also possible to specifically functionalise only one segment of the block copolymer, providing a means to precisely locate specific biological signals within the 10-100nm domains of a nano-patterned surface, formed via the programmed micro-phase separation of the block copolymer system. The density and spatial location of signalling molecules can be controlled by altering several variables, such as block length, block asymmetry, as well as processing parameters, providing the potential to authentically emulate the cellular micro to nano-environment and thus greatly improving on existing biomaterial and tissue engineering technologies. This thesis achieved several aims as outlined below; Developed methods to control the self-assembly of PS-PEO block copolymers and generate nano-patterned surfaces and scaffolds with utility for biomaterials applications. PS-PEO diblock copolymers were blended with polystyrene (PS) homopolymer and spin cast, resulting in the rapid self-assembly of vertically oriented PEO cylinders in a matrix of PS. Due to the kinetically constrained phase-separation of the system, increasing addition of homopolymer is shown to reduce the diameter of the PEO domains. This outcome provides a simple method that requires the adjustment of a single variable to tune the size of vertically oriented PEO domains between 10-100nm. Polymeric scaffolds for tissue engineering were manufactured via a method that combines macro-scale temperature induced phase separation with micro-phase separation of block copolymers. The phase behaviour of these polymer-solvent systems is described, and potential mechanisms leading to this spectacular structure formation are presented. The result is highly porous scaffolds with surfaces comprised of nano-scale self-assembled block copolymer domains, representing a significant advance in currently available technologies. Characterised the properties of these unique nano-structured materials as well as their interaction with proteinaceous fluids and cells. Nano-patterned PS-PEO self-assembled surfaces showed a significant reduction in protein adsorption compared to control PS surfaces. The adhesion of NIH 3T3 fibroblast cells was shown to be significantly affected by the surface coverage of PEO nano-domains formed by copolymer self-assembly. These nano-islands, when presented at high number density (almost 1000 domains per square micron), were shown to completely prevent cellular attachment, even though small amounts of protein were able to bind to the surface. In order to understand the mechanism by which these surfaces resisted protein and cellular adsorption we utilised neutron reflection to study their solvation and swelling properties. The results indicate that the PEO domains are highly solvated in water; however, the PEO chains do not extend into the solvent but remain in their isolated domains. The data supports growing evidence that the key mechanism by which PEO prevents protein adsorption is the blocking of protein adsorption sites. Control the nano-scale presentation of cellular adhesion and other biological molecules via the self-assembly of functionalised PS-PEO block copolymers Precise control over the nano-scale presentation of adhesion molecules and other biological factors represents a new frontier for biomaterials science. Recently, the control of integrin spacing and cellular shape has been shown to affect fundamental biological processes, including differentiation and apoptosis. We present the self-assembly of maleimide functionalised PS-PEO copolymers as a simple, yet highly precise method for controlling the position of cellular adhesion molecules. By controlling the phase separation of the functional PS-PEO block copolymer we alter the nano-scale (on PEO islands of 8-14 nm in size) presentation of the adhesion peptide, GRGDS, decreasing lateral spacing from 62 nm to 44 nm and increasing the number density from ~ 450 to ~ 900 islands per um2. The results indicate that the spreading of NIH-3T3 fibroblasts increases as the spacing between islands of RGD binding peptides decreases. Further, the same functional PS-PEO surfaces were utilised to immobilise poly-histidine tagged proteins and ECM fragments. The technologies developed in this thesis aim to improve on several weaknesses of existing biomaterials, in particular, directing cellular behaviour on surfaces, and within tissue engineering scaffolds, but also, on the prevention of fouling of biomaterials via non-specific protein adsorption. The application of block copolymer self-assembly for biomaterial and tissue engineering systems described in this thesis has great potential as a platform technology for the investigation of fundamental cell-surface and protein-surface interactions as well as for use in existing and emerging biomedical applications.

The interaction of materials with biological systems is of critical importance to a vast number of applications from medical implants, tissue engineering scaffolds, blood-contacting devices, cell-culture products, as well as many other products in industries as diverse as agriculture. This thesis describes a method for the modification of biomaterial surfaces and the generation of tissue engineering scaffolds that utilises the self assembly of poly (styrene)-block-poly (ethylene oxide) (PS-PEO) block copolymers. Block copolymers consist of alternating segments of two or more chemically distinct polymers. The salient feature of these materials is their ability to self organise into a wide range of micro-phase separated structures generating patterned surfaces that have domain sizes in the order of 10-100nm. Further, it is also possible to specifically functionalise only one segment of the block copolymer, providing a means to precisely locate specific biological signals within the 10-100nm domains of a nano-patterned surface, formed via the programmed micro-phase separation of the block copolymer system. The density and spatial location of signalling molecules can be controlled by altering several variables, such as block length, block asymmetry, as well as processing parameters, providing the potential to authentically emulate the cellular micro to nano-environment and thus greatly improving on existing biomaterial and tissue engineering technologies. This thesis achieved several aims as outlined below; Developed methods to control the self-assembly of PS-PEO block copolymers and generate nano-patterned surfaces and scaffolds with utility for biomaterials applications. PS-PEO diblock copolymers were blended with polystyrene (PS) homopolymer and spin cast, resulting in the rapid self-assembly of vertically oriented PEO cylinders in a matrix of PS. Due to the kinetically constrained phase-separation of the system, increasing addition of homopolymer is shown to reduce the diameter of the PEO domains. This outcome provides a simple method that requires the adjustment of a single variable to tune the size of vertically oriented PEO domains between 10-100nm. Polymeric scaffolds for tissue engineering were manufactured via a method that combines macro-scale temperature induced phase separation with micro-phase separation of block copolymers. The phase behaviour of these polymer-solvent systems is described, and potential mechanisms leading to this spectacular structure formation are presented. The result is highly porous scaffolds with surfaces comprised of nano-scale self-assembled block copolymer domains, representing a significant advance in currently available technologies. Characterised the properties of these unique nano-structured materials as well as their interaction with proteinaceous fluids and cells. Nano-patterned PS-PEO self-assembled surfaces showed a significant reduction in protein adsorption compared to control PS surfaces. The adhesion of NIH 3T3 fibroblast cells was shown to be significantly affected by the surface coverage of PEO nano-domains formed by copolymer self-assembly. These nano-islands, when presented at high number density (almost 1000 domains per square micron), were shown to completely prevent cellular attachment, even though small amounts of protein were able to bind to the surface. In order to understand the mechanism by which these surfaces resisted protein and cellular adsorption we utilised neutron reflection to study their solvation and swelling properties. The results indicate that the PEO domains are highly solvated in water; however, the PEO chains do not extend into the solvent but remain in their isolated domains. The data supports growing evidence that the key mechanism by which PEO prevents protein adsorption is the blocking of protein adsorption sites. Control the nano-scale presentation of cellular adhesion and other biological molecules via the self-assembly of functionalised PS-PEO block copolymers Precise control over the nano-scale presentation of adhesion molecules and other biological factors represents a new frontier for biomaterials science. Recently, the control of integrin spacing and cellular shape has been shown to affect fundamental biological processes, including differentiation and apoptosis. We present the self-assembly of maleimide functionalised PS-PEO copolymers as a simple, yet highly precise method for controlling the position of cellular adhesion molecules. By controlling the phase separation of the functional PS-PEO block copolymer we alter the nano-scale (on PEO islands of 8-14 nm in size) presentation of the adhesion peptide, GRGDS, decreasing lateral spacing from 62 nm to 44 nm and increasing the number density from ~ 450 to ~ 900 islands per um2. The results indicate that the spreading of NIH-3T3 fibroblasts increases as the spacing between islands of RGD binding peptides decreases. Further, the same functional PS-PEO surfaces were utilised to immobilise poly-histidine tagged proteins and ECM fragments. The technologies developed in this thesis aim to improve on several weaknesses of existing biomaterials, in particular, directing cellular behaviour on surfaces, and within tissue engineering scaffolds, but also, on the prevention of fouling of biomaterials via non-specific protein adsorption. The application of block copolymer self-assembly for biomaterial and tissue engineering systems described in this thesis has great potential as a platform technology for the investigation of fundamental cell-surface and protein-surface interactions as well as for use in existing and emerging biomedical applications.

Thesis (Ph.D.)--University of Alabama at Birmingham, 2008. / Title from first page of PDF file (viewed on June 29, 2009). Includes bibliographical references.

Integrins are heterodimeric transmembrane receptors composed of an α and a β subunit, that are expressed on the surface of all metazoan cells. These bidirectional signaling molecules are involved in many well-known aspects of cell function, although the role of integrins in early embryonic development remains a mystery. The purpose of this study was to characterize S. purpuratus integrins and determine if they are necessary for early embryonic development. Full length cDNA sequences for four incomplete gene predictions, αC, αD, αF, and βD, were determined by amplifying overlapping fragments and sequencing EST clones. Each cDNA has a single open reading frame predicting a protein with canonical integrin features. QPCR results show αC, αD, and βD are expressed in the embryo at relatively constant levels during the first 96 hours of development. αF is expressed in blastulae, during morphogenesis and tissue differentiation, at up to 35 times the levels of mRNA in the egg. Using a morpholino antisense oligonucleotide to block translation of αC results in a higher than normal mortality rate (57.1%) by 24 hours of development and 36.7% of embryos during this period have defects in aspects of cell division. These results indicate that αC is an essential gene for early development and that it may function in coordination of mitosis and cytokinesis. The expression of multiple subunits and the demonstration that αC has an essential role suggests that there are several non-overlapping functions for integrins in early embryonic development.

Base teórica: O processo de implantação do embrião no ser humano é extremamente complexo e, ao mesmo tempo, essencial para que a mulher possa engravidar. Neste processo, em que o endométrio precisa sofrer uma série de mudanças para tornar-se receptivo, a adequada expressão de MFG-E8 (milk fat globule epidermal growth factor 8), seu receptor a integrina αvβ3 e LIF (leukemia inhibitory factor) parecem ter um papel importante. Além do mais, mulheres com infertilidade e endometriose podem apresentar a falha de implantação como uma grande barreira para obter seu sucesso terapêutico. Objetivos: Avaliar o papel de MFG-E8 e do seu receptor integrina αvβ3 em um modelo de implantação in vitro com uma linhagem celular trofoblástica e outra de epitélio endometrial. Comparar a expressão de MFG-E8, de integrina αvβ3 e de LIF no endométrio de pacientes férteis e inférteis com endometriose durante a janela de implantação. Métodos: No primeiro ensaio, utilizando-se uma linhagem celular bem diferenciada de adenocarcinoma de endométrio (células Ishikawa) e uma linhagem de coriocarcinoma de trofoblasto, o modelo in vitro de implantação humana foi estabelecido. Para investigação do impacto do bloqueio de MFG-E8 e integrina αvβ3, ambas linhagens celulares foram pré-tratadas com anticorpos contra estas proteínas em diferente concentrações antes do ensaio de adesão. No ensaio subsequente, para comparar a expressão de MFG-E8, de integrina αvβ3 e de LIF no endométrio humano, foram realizadas biópsias no período da janela de implantação (LH+7 a LH+10) com cateter de Pipelle. As amostras foram submetidas a imunohistoquímica, e analisadas através do HSCORE. Resultados: Na avaliação in vitro observamos que as células Ishikawa pré-tratadas com anticorpo anti-MFG-E8 causaram diminuição da adesão das esferas Jar dose-dependente. Por outro lado, o pré-tratamento das esferas Jar não resultou em diminuição significativa da adesão. Pré-tratamento com anticorpos anti-integrina αvβ3, tanto de células Ishikawa como de esferas Jar, causaram inibição significativa, dose-dependente, da adesão das esferas. A análise imunohistoquímica das biópsias realizadas durante a janela de implantação mostrou uma expressão aumentada de MFG-E8 em pacientes com endometriose e infertilidade. Além do mais, houve expressão diminuída de LIF no grupo em estudo. Contudo, não houve diferença estatisticamente significativa na expressão de integrina αvβ3 entre os grupos em estudo. Conclusão: Este estudo demonstrou que, quando se bloqueia MFG-E8 ou seu receptor integrina αvβ3 em células Ishikawa em um modelo in vitro, ocorre uma diminuição de adesão das células Jar. Além do mais, bloqueando-se a integrina αvβ3 nas esferas Jar, também ocorre uma diminuição da adesão destas nas células Ishikawa. No entanto, quando estudamos o endométrio in vivo de pacientes com endometriose e infertilidade, encontramos a expressão aumentada de MFG-E8 e diminuída de LIF durante a janela de implantação no endométrio. / Background: The human implantation process is very complex and, at the same time, it is essential for women to achieve pregnancy. In this process, where the human endometrium must go through a lot of changes in order to become receptive, an adequate expression of MFG-E8 (milk fat globule epidermal growth factor 8), integrin αvβ3 and LIF (leukemia inhibitory factor) appear to play an important role. Furthermore, women with endometriosis and infertility may have in their implantation process the key to achieve pregnancy. Objectives: To investigate the role of MFG-E8 and its receptor integrin αvβ3 in the attachment of trophoblast cells to the endometrial epithelium, in an in vitro model. To compare endometrial expression of MFG-E8, integrin αvβ3 and LIF between fertile patients and patients with endometriosis and infertility during the window of implantation. Methods: In our first assay, by using a well-differentiated endometrial adenocarcinoma cell line (Ishikawa cells) and choriocarcinoma human trophoblast cells (Jar cells), an in vitro model mimicking human implantation was established. To investigate the impact of blocking MFG-E8 and integrin αvβ3, the cell lines were pretreated with antibodies against those proteins at different concentrations before the attachment assay. Moreover, to compare endometrial expression of MFG-E8, integrin αvβ3 and LIF, endometrial biopsies were performed during the window of implantation (LH+7 to LH+10) with the Pipelle catheter. The samples were submitted immunochemistry, and analyzed with HSCORE. Results: Pretreatment of Ishikawa cells with anti-MFG-E8 antibody caused a dosedependent and significant inhibition of attachment is our in vitro assay. On the other hand, pretreatment of Jar spheroids did not result in a significant effect on the attachment rate. Pretreatment of Ishikawa cells as well as Jar spheroids with anti-integrin avb3 antibodies resulted in a dose-dependent, significant inhibition of attachment. The immunochemistry analysis of the endometrial biopsies performed during the window of implantation showed increased MFG-E8 expression in patients with endometriosis and infertility. Moreover, there was lower LIF expression in the study group. Conclusion: This study showed that blocking MFG-E8 and its receptor integrin αvβ3 in Ishikawa cells diminishes Jar spheroid attachment in an in vitro model. Moreover, blocking integrin αvβ3 in the trophoblastic cells also diminished their attachment to the Ishikawa monolayer. Nevertheless, when we studied the endometrium of patients with endometriosis and infertility, we saw an increased expression of MFG-E8 and decreased expression of LIF during the window of implantation.

Les mécanismes de formation des plaquettes sanguines à partir des mégacaryocytes ne sont pas totalement compris, mais l’environnement médullaire semble y avoir une influence cruciale. Dans ce travail nous montrons que i) les intégrines β3, récepteurs de protéines de matrice extracellulaire, semblent impliquées dans la mégacaryopoïèse et la formation des plaquettes, ii) la différenciation des cellules hématopoïétiques dans un environnement 3D de rigidité comparable à la moelle osseuse améliore la maturation des mégacaryocytes différenciés in vitro et iii) la myosine IIA est impliquée dans la distribution des organelles dans les mégacaryocytes. Parallèlement, Nous avons caractérisé la spécificité d’expression du transgène Pf4-cre pour valider son utilisation dans nos approches expérimentales. Ce travail apporte un éclairage nouveau sur le rôle de la myosine IIA et des intégrines dans les mégacaryocytes et souligne l’influence de la rigidité de l’environnement dans la mégacaryopoïèse. / Megakaryocytes differentiation (megakaryopoiesis) and platelet formation mechanisms are not entirely understood, but the bone marrow environment seems to be crucial in these processes. In this thesis, we show i) that integrin β3, the extracellular matrix protein receptors, are involved in megakaryopoiesis and platelet formation, ii) that recreating a 3D environment of stiffness in the range of that of bone marrow improves the maturation of in vitro differentiated megakaryocytes and iii) a new role for myosin IIA in the cytoplasmic distribution of organelles within the megakaryocyte. As a side-project, we characterized the specificity of expression of the Pf4-cre transgene to validate its use in our experimental approaches. This work enlightens new roles for myosin IIA and integrins in megakaryocytes and indicates that stiffness of the environment influences megakaryopoiesis.

Ces travaux de thèse portent sur la conception, la synthèse et l'étude biologique de vecteurs peptidiques pour des applications en diagnostic et/ou thérapie du cancer.Nous avons utilisé des châssis cyclodécapeptidiques fonctionnalisés de façon chimiosélective par des éléments de ciblage et des effecteurs. Ces châssis, dotés de quatre ligands c[RGDfK], possèdent une forte affinité pour les récepteurs intégrine avB3 qui sont surexprimés dans de nombreux cancers et par les cellules endothéliales de l'environnement tumoral. Ils sont en revanche peu exprimés par les tissus sain. La présentation multivalente des ligands -RGD- permet également au châssis d'être internalisé par les cellules tumorales.Nous avons donc mis au point des molécules composées du châssis peptidique, de quatre ligands -RGD- pour le ciblage tumoral, et de différents effecteurs pour plusieurs applications. A travers de multiples collaborations, nous avons relié ce vecteur à un agent hautement toxique (cryptophycine), un photosensibilisateur (DHP), un peptide pro-apoptotique (BAX), un complexe de Gallium 68 (pour une étude clinique de phase I pour une application en imagerie TEP). Nous avons également greffé ces châssis présentant quatre motifs -RGD- à des polymères ou à des nanoparticules de silice, tous deux fluorescents.Le projet principal de cette thèse était la conception de vecteurs ciblant deux récepteurs tumoraux de manière simultanée. En plus de cibler l'intégrine avB3, nous avons ciblé le récepteur NRP1 qui est lui aussi surexprimé lors de l'angiogenèse tumorale. Nous avons exploité divers réactions chimiosélectives (oxime, cycloaddition de Huisgen, amidation) pour concevoir des vecteurs fluorescents ciblant l'un des deux récepteurs ou les deux à la fois. Des tests biologiques in vitro et in vivo ont été réalisés. Il s'avère que les composés à double ciblage permettent une très bonne détection de la tumeur, mais non supérieure à des composés à mono ciblage. En revanche, la réponse cellulaire déclenchée par les composés à double ciblage est unique, et totalement différente d'une co-injection. Nous avons plusieurs éléments qui tendent à prouver qu'un complexe NRP1-vecteur-Intégrine se formerait et resterait ancré au niveau de la membrane cellulaire, bloquant son internalisation. / This thesis work is about conception, synthesis and biological activities of peptide vectors for diagnostic and/or therapeutic applications against cancer.We used cyclodecapeptidic scaffolds chemoselectively handled with targeting elements and effectors. Those scaffolds presenting four c[RGDfK] ligands have a strong affinity for integrin avB3 receptors, wich are overexpressed in various cancers and by endothelial cells from the tumor surrounding. They are poorly expressed in healthy tissues. The multivalent presentation of -RGD- motifs higly increases the internalisation of the scaffold by tumor cells. Thus we developed molecules composed by four -RGD- motifs for tumor targeting, and different effectors for various applications. Thanks to multiple collaborations, we linked the vector to a highly cytotoxic compound (cryptophycine), a photosensitiser (DHP), a pro-apoptotic peptide (BAX), a DOTA complex (for 68-Ga complexation, for PET applications). We also grafted the cyclodecapeptide bearing four -RGD- motifs to polymers or silica nanoparticles, both fluorescent.The main project of this thesis was the conception of dual targeting vectors. Our objective was to simultaneously target two receptors overexpressed in the tumor periphery. Beside the targeting of avB3, we decided to target the NRP1 receptor, which is also overexpressed during tumor angiogenesis. We exploited various chemoselective reactions (oxime, huisgen cycloaddition, peptide coupling) to synthesise fluorescent vectors targeting one of the two receptors, or both. In vitro and in vivo biological experiments were realised. We discovered that dual targeting compounds allow a really good tumor detection, but inferior to mono targeting ones. Nevertheless, the cellular answer triggered by dual targeting compounds is totally different from those obtained with other compounds, including co-injection. We found different elements that tend to show that a NRP1-vector-integrin could be formed, and would be blocked inside the cellular membrane, resulting in its internalisation's blocking.