<p>Surface film formation at the electrode/electrolyte interface in lithium-ion batteries has a crucial impact on battery performance and safety. This thesis describes the characterisation and treatment of electrode interfaces in lithium-ion batteries. The focus is on interface modification to improve battery safety, in particular to enhance the onset temperature for thermally activated reactions, which also can have a negative influence on battery performance. </p><p>Photoelectron Spectroscopy (PES) and Differential Scanning Calorimetry (DSC) are used to investigate the surface chemistry of electrodes in relation to their electrochemical performance. Surface film formation and decomposition reactions are discussed.</p><p>The upper temperature limit for lithium-ion battery operation is restricted by exothermic reactions at the graphite anode; the onset temperature is shown to be governed by the composition of the surface film on the anode. Several electrolyte salts, additives and an anion receptor have been exploited to modify the surface film composition. The most promising thermal behaviour is found for graphite anodes cycled with the anion receptor, tris(pentafluorophenyl)borane, which reduces salt reactions and increases the onset temperature from ~80 °C to ~150 °C.</p><p>The electrochemical performance and surface chemistry of Swedish natural graphite, carbon-treated LiFePO₄ and anodes from high-power lithium-ion batteries are also investigated. Jet-milled Swedish natural graphite exhibits a high capacity and rate capability, together with a decreased susceptibility to solvent co-intercalation. Carbon-treated LiFePO₄ shows promising results: no solvent reaction products are detected. The amount of salt compounds increases, with power fade occurring for anodes from high-power lithium-ion batteries; the solvent reduction products comprise mainly Li-carboxylate type compounds.</p>

<p>The focus of this thesis has been on the effects of segregation in mixtures of amphiphilic molecules. Two different systems were investigated: fluorocarbon-hydrocarbon surfactant mixtures and lipid-surfactant mixtures.</p><p>In fluorocarbon-hydrocarbon surfactant mixtures the repulsive interactions between the chains can lead to a demixing into different types of coexisting micelles, fluorocarbon rich and hydrocarbon rich. From NMR self-diffusion measurements such a demixing was found to occur in the mixture of the partially fluorinated surfactant HFDePC and C₁₆TAC. We furthermore suggested a demixing also within the micelles to explain ¹⁹F-NMR line width data and results from neutron scattering.</p><p>In lipid-surfactant mixtures, a segregation of the molecules may instead be caused by a difference in the preferred curvature of the lipid and the surfactant residing within the same aggregate. Using a surfactant selective electrode, binding isoterms of four different cationic surfactants (C₁₂TAC, C₁₄TAC, C₁₆TAC and HFDePC) to preformed lipid (GMO) vesicles were determined. Perforated vesicles were observed by cryo-TEM in the mixture with C₁₆TAC. To explain the results from the binding isoterms, the formation of pores in the bilayer was regarded as a cooperative process, similar to micelle formation. The surfactant accumulates at the edges of the pores, and increasing the surfactant concentration results in an increased number of pores with a constant surfactant/lipid ratio at the edges.</p><p>The lipid-surfactant mixtures were also studied at the solid/solution interface using AFM. An adsorbed mesh structure, a counterpart to the bulk perforated lamellar phase, was observed for the first time.</p>

<p>The main focus of this thesis is the investigation of the dissociation dynamics of aryl halides using femtosecond pump-probe spectroscopy. In the monohalogenated aryl halides, iodo-, bromo- and chlorobenzene, the rate of dissociation following excitation at 266 nm in the gas phase increased with increasing mass of the halogen atom. This process was assigned to predissociation of the initially excited singlet (π, π*) state via a repulsive triplet (n, σ*) state due to spin-orbit interaction. In addition to the predissociative mechanism, a direct dissociation channel was observed in iodobenzene. The rate of the predissociation in bromobenzene was found to be faster in the condensed phase than in the gas phase, which can be explained by solvent-induced symmetry perturbations. <i>Ab initio</i> calculations of the potential energy surfaces of the ground state and several low lying excited states in bromobenzene have been performed in order to verify the suggested mechanism. Substituting one of the hydrogen atoms in bromobenzene affected the predissociation rate significantly. In o-, m- and p-dibromobenzene the predissociation rate increased with decreasing distance between the bromine atoms in accordance with an increased spin-orbit interaction introduced by the bromine substituent. The fastest predissociation rate was observed in 1,3,5-tribromobenzene. With chlorine and fluorine substitution, inductive and conjugative effects were found to be of importance. In the o- and m-isomers of the dihalogenated aryl halides, an additional faster dissociation channel was observed. Guided by <i>ab initio</i> calculations of the potential energy surfaces in the dibromobenzene isomers, we ascribed the fast dissociation pathway to predissociation of an initially excited triplet state. Upon methyl group substitution in bromobenzene, the decreased lifetime of the initially excited state was attributed to an incresaed density of coupled states.</p><p>Another system which has been studied in the condensed phase is diiodomethane. Using Car-Parrinello molecular dynamics simulations we observed a prompt dissociation and subsequent recombination to the isomer, iso-diiodomethane, in acetonitrile solution.</p><p>Vibrational wavepacket dynamics in the C (¹Σ⁺) state of NaK were studied using a direct ionization probing scheme. A simple analytical expression for the pump-probe signal was developed in order to see what factors that govern direct ionization of the vibrational wavepacket. Our experimental data was consistent with a photoionization transition dipole moment that varies with internuclear distance.</p>

<p>Metal ions solvated in aqueous, non-aqueous, and mixtures of solvents occur in many chemical contexts, for example in electrochemical applications and solvent separation. Solvated ions appear in high concentration in the living organisms, where their presence or absence can fundamentally alter the functions of life. In many of these cases, understanding the selective solvation and the dynamics of the ions is essential for the understanding of the processes involved.</p><p>Computer simulation provides a molecular level of detail of the solvation process usually not available from experiments. The quality of the interaction models employed in the theoretical description is of particular importance, since even rather small changes in the interaction can lead to substantial and qualitative differences.</p><p>This thesis describes the development of a sequence of increasingly refined analytical ion-solvent potentials from <i>ab initio</i> calculations for the systems Li⁺(<i>aq</i>), Na⁺(<i>aq</i>), Mg²⁺(<i>aq</i>), Al³⁺(<i>aq</i>), Li⁺(<i>MeCN</i>), Na⁺(<i>MeCN</i>), Li⁺(<i>aq, MeCN</i>), and Na⁺(<i>aq, MeCN</i>). Molecular dynamics simulations using these potentials were subsequently performed, and some key-properties computed. The reliability of the computed thermodynamical, structural and dynamical properties was scrutinized.</p>

<p>Statistical experimental designs have been used for method development and optimisation of separation. Two reversed phase HPLC methods were optimised. Parameters such as the pH, the amount of tetrabutylammonium (TBA; co-ion) and the gradient slope (acetonitrile) were investigated and optimised for separation of erythromycin A and eight related compounds. In the second method, a statistical experimental design was used, where the amounts of acetonitrile and octane sulphonate (OSA; counter ion) and the buffer concentration were studied, and generation of an α-plot with chromatogram simulations optimised the separation of six analytes.</p><p>The partial filling technique was used in capillary electrophoresis to introduce the chiral selector Cel7A. The effect of the pH, the ionic strength and the amount of acetonitrile on the separation and the peak shape of R- and S-propranolol were investigated.</p><p>Microemulsion electrokinetic chromatography (MEEKC) is a technique similar to micellar electrokinetic chromatography (MEKC), except that the microemulsion has a core of tiny droplets of oil inside the micelles. A large number of factors can be varied when using this technique. A screening design using the amounts of sodium dodecyl sulphate (SDS), Brij 35, 1-butanol and 2-propanol, the buffer concentration and the temperature as factors revealed that the amounts of SDS and 2-propanol were the most important factors for migration time and selectivity manipulation of eight different compounds varying in charge and hydrophobicity. SDS and 2-propanol in the MEEKC method were further investigated in a three-level full factorial design analysing 29 different compounds sorted into five different groups. Different optimisation strategies were evaluated such as generating response surface plots of the selectivity/resolution of the most critical pair of peaks, employing chromatographic functions, simplex optimisation in MODDE and 3D resolution maps in DryLab™.</p><p>Molecular descriptors were fitted in a PLS model to retention data from the three-level full factorial design of the MEEKC system. Two different test sets were used to study the predictive ability of the training set. It was concluded that 86 – 89% of the retention data could be predicted correctly for new molecules (80 – 120% of the experimental values) with different settings of SDS and 2-propanol.</p><p>Statistical experimental designs and chemometrics are valuable tools for the development and optimisation of analytical methods. The same chemometric strategies can be employed for all types of separation techniques.</p>

<p>This thesis concerns the development and utilisation of techniques for characterisation and transdermal delivery of various systems for pharmaceutical applications.</p><p>The degree of dissociation of drug molecules and the mobilities of the different species formed are essential factors affecting the rate of drug delivery by iontophoresis. Hence, determination of drug mobility parameters and equilibrium constants are important for the development of iontophoretic systems. With capillary zone electrophoresis using a partial filling technique and methyl-β-cyclodextrin as chiral selector, the enantiomers of orciprenaline were separated. The association constants between the enantiomers of the drug and the selector were also evaluated. Precision conductometry studies were performed for the hydrochloride salts of lidocaine and 5-aminolevulinic acid in aqueous propylene glycol and water as media, respectively.</p><p>Iontophoresis is a technique for drug delivery where charged molecules are transported into and through skin by application of a weak direct electrical current. The drugs 5-aminolevulinic acid and its methyl ester were used as model compounds and incorporated in two different drug delivery vehicles, a sponge phase and carbopol gel. The bicontinuous structure of the sponge phase, constituted of monoolein and a mixture of propylene glycol and water, makes it interesting for use in iontophoretic delivery, since ions can move more or less freely in the aqueous as well as in the lipid domains. Furthermore, all three components are known for their penetration enhancing abilities. Hydrogels like carbopol gels are interesting media with respect to iontophoretic studies, since devices for iontophoresis often utilize hydrogels as contact interfaces between the skin and the electrodes. The results indicate that the transport achieved iontophoretically using the gel (1 % active substance) was comparable with the passive delivery of clinically used formulations (16 % - 20 % active substance).</p>

<p>This thesis reports on the development of low-temperature processes for transition metal carbide and MAX-phase thin film growth. Magnetron sputtering and evaporation, far from thermodynamical equilibrium, have been utilised to engineer the properties of the films by physical and chemical control. Deposition of W, W₂C and β-WC_1-x films with controlled microstructure, from nanocrystalline to epitaxial, is shown in the W-C system down to 100 ^oC. W films with upto 20 at% C exhibited an extreme solid-solution hardening effect, with a nanoindentation hardness maximum of 35 GPa. Furthermore, the design of epitaxial ternary carbide films is demonstrated in the Ti_1-xV_xC_y system in the form of controlled unit-cell parameters, strain-free films with a perfect match to the substrate, and ternary epitaxial gradient films. Moreover, phase stabilisation and pseudomorphic growth can be tuned in (Nb,Mo)C and (Ti,W)C films. The results obtained can be used for example to optimise electrical contacts in SiC high-power semiconductor devices. </p><p>A large part of this thesis focuses on the deposition of MAX-phases. These compounds constitute a family of thermally stable nanolaminates with composition M_n+1AX_n, n=1, 2 or 3, where M is an early transition metal, A is generally a group 13-14 element, and X is C or N. They show a combination of typical ceramic and metallic properties and are also machinable by virtue of the unique deformation behaviour observed only in laminates. So far, the MAX-phases have almost exclusively been prepared by high-temperature sintering and studied in bulk form. However, this thesis establishes a patented seed layer approach for successful MAX-phase thin film depositions down to 750 ^oC. For the first time, single-phase and epitaxial films of Ti₃SiC₂, Ti₃AlC₂ and Ti₂AlC have been grown. The method has also been used to synthesise a new MAX-phase, Ti₄SiC₃. In addition, two previously unreported intergrown MAX-type structures are presented, Ti₅Si₂C₃ and Ti₇Si₂C₅. Combined theoretical and experimental results show the possibility to deposit films with very low bulk resistivity and designed mechanical properties. Furthermore, the demonstration of MAX-phase and carbide multilayer films paves the way for macrostructure engineering, for example, in coatings for low-friction or wear applications.</p>

<p>The methods HPLC, microcalorimetry and FTIR together with chemometry, provide good analytical tools to follow the degradation of nitro-cellulose.</p><p>The degradation products formed from diphenylamine (DPA) during storage can be followed with HPLC. FTIR, together with chemometry, also gives the precision needed for safety control of propellants.</p><p>Nitro-cellulose (NC) containing DPA obtained a green colour already after 1 day storage at 70°C. About 10% of the stabilizer, and its derivatives, added were not extractable giving an extended time to autocatalysis. This time could be extended up to 70 days at 70°C for an extracted sample compared to about 3 days for non-stabilized NC. This was not shown before.</p><p>Aged and extracted NC samples contained a non-extractable nitro compound. The most likely compound is 2,4´-dinitroDPA, probably bonded to NC via the amine nitrogen. The bonding to NC occurs after the formation of NNODPA. This is something not described before.</p><p>Using another batch of nitro-cellulose to find out if a chemical bonding occurs gave inconclusive results as a blue NC was formed. Low molecular NC with high stability was obtained. A chemical bonding probably occurs when using NNODPA as a stabilizer, indicating NNODPA plays a key role.</p><p>The use of FTIR/chemometry is a promising method to use when studying small chemical changes. The described methodology should be used to find out more about the compound(s) being bonded to NC.</p>

<p>CYP2C9 is one of our major drug metabolising enzymes and belongs to the cytochrome P450 (CYP) super family. The aim of this thesis was to gain an understanding of the quantitative structure–activity relationships (QSAR) of CYP2C9 substrates and inhibitors. This information will be useful in predicting drug metabolism and the potential for drug–drug interactions. To achieve this, a well characterised data set of structurally diverse, competitive CYP2C9 inhibitors was identified in our laboratory. Several computational methodologies, many based on GRID molecular interaction fields, were applied or developed in order to handle issues such as compound alignment and bioactive conformer selection. First, a traditional 3D QSAR was carried out in GOLPE, generating a predictive model. In this model the selection of a bioactive conformer and alignment was based on docking in a homology model of CYP2C9. Secondly, we introduced the concept of alignment independent descriptors from ALMOND. These descriptors were used to generate quantitatively and qualitatively predictive models. We subsequently derived conformation independent descriptors from molecular interaction fields calculated in FlexGRID. This enabled the derivation of 3D QSAR models without taking into account the selection of an alignment or a bioactive conformer. A subsequent programming effort enabled the conversion of this model back to 3D aligned pharmacophores. Similar alignment independent descriptors were also used in the development of the software MetaSite® that predicts the site of metabolism for CYP2C9 ligands. Finally, as crystal information on this isoform emerged, the performance of molecular dynamics simulations and homology models and the flexibility of the protein were evaluated using statistical analyses.</p><p>These modelling efforts have resulted in detailed knowledge of the structural characteristics in ligand interactions with the cytochrome P450 2C9 isoform.</p>

<p>The Li-ion battery has, from its commercialisation in the early 1990's, now become the most widely used power source for portable low-power electronics: laptops, cellular phones and MP3-players are a few examples. To further develop existing and find new electrode materials for these batteries, it is vital to understand the lithium insertion/extraction mechanisms taking place during battery operation. In this thesis, single-crystal X-ray diffraction has been used to investigate lithium insertion/extraction mechanisms in the cathode materials V₆O₁₃ and LiFePO₄. A novel single-crystal electrochemical cell for <i>in situ</i> single-crystal X-ray diffraction studies has also been developed.</p><p>The phases Li₃V₆O₁₃ and Li_3+xV₆O₁₃, 0<x<1, both contain a disordered lithium ion. A low-temperature study of Li_3.24V₆O₁₃ (at 95 K) shows that this disorder is static rather than dynamic; the lithium ion is equally distributed above and below an inversion centre in the centrosymmetric V₆O₁₃ host structure. Short-range-ordering between this disordered lithium ion and the lithium ion inserted into Li₃V₆O₁₃ gives rise to solid-solution behaviour not observed earlier in the Li_xV₆O₁₃ system. A model is proposed for the lithium insertion mechanism up to the end-member composition Li₆V₆O₁₃.</p><p>Lithium has also been electrochemically extracted from LiFePO₄ single crystals. On the basis of the shapes of the LiFePO₄ and FePO₄ reflections, it is concluded that FePO₄ is formed at the crystal surface and that the LiFePO₄/FePO₄ interface propagates into the crystal. This is in agreement with an earlier proposed model for lithium extraction from LiFePO₄ particles.</p><p>Initial experiments with the newly developed single-crystal electrochemical cell for <i>in situ</i> single-crystal X-ray diffraction demonstrate that it is possible to insert lithium into a single crystal of V₆O₁₃ and then collect single-crystal X-ray diffraction data. The method needs further development but promises to become a powerful tool for studying lithium insertion/extraction mechanisms.</p>