O objetivo do trabalho é investigar como as condições biomecânicas de portadores de Osteoartrite (OA) de joelho afetam a capacidade de realizar atividades de vida diária. Participaram desse estudo 39 indivíduos, sendo 18 indivíduos com OA de joelho bilateral grau 3, na escala Kellgren Lawrence, e 21 indivíduos saudáveis. Foram utilizadas duas plataformas de força (AMTI) para registrar a Força de Reação do Solo, cinco câmeras (Sistema Vicon) para registrar as variações angulares das articulações do quadril, joelho e tornozelo, nos planos sagital e frontal, e cinco sensores de eletromiografia wireless (Sistema Noraxon) para registrar as atividades dos músculos reto femoris (RF), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA) e gastrocnemius lateralis (GL) no segmento dominante (segmento D) dos sujeitos do grupo controle e no segmento com maior gravidade de lesão nos indivíduos com OA (segmento OA). Também foram calculados por meio de dinâmica inversa os momentos articulares nos planos sagital e frontal. Três atividades de vida diária foram investigadas, a marcha, o levantar e sentar em uma cadeira e o descer de um degrau de 20cm. Nos resultados, foi observada uma menor variação angular de forma geral nas articulações do quadril e joelho. Não foi observada diferença nas cargas mecânicas aplicadas ao aparelho locomotor. Nas três atividades cotidianas, os indivíduos com OA apresentaram adução no quadril e abdução no joelho, que denota um alinhamento em valgo durante a execução das tarefas. Poucas diferenças foram observadas nos momentos articulares flexores e extensores, nas três atividades de vida diária investigadas. No levantar e sentar menores momentos extensores foram observados no joelho durante as duas fases do movimento. Nos momentos adutores, poucas diferenças foram observadas na marcha. No levantar e sentar, o segmento OA não apresentou momentos adutores de joelho maiores que nos outros segmentos. No descer degrau, o segmento CL apresentou maior momento adutor que o segmento OA e D. De forma geral, as diferenças na ativação muscular indicam maior intensidade de ativação no grupo controle. O músculo VL nas três atividades apresentou intensidade de ativação menor nos indivíduos com OA. Observou-se maior co-ativação na marcha e no descer degrau, mas não no levantar e sentar. Na marcha a maior co-ativação ocorreu nas três articulações. No descer degrau, ocorreu no quadril e no joelho. Nas três atividades, maior co-contração foi observada e principalmente no joelho. Conclui-se que as alterações na técnica de movimento mostram-se tarefa dependente. As alterações na execução do movimento no plano sagital não foram suficientes para afetar o controle das cargas mecânicas, na marcha e no descer degrau. Apenas na tarefa de levantar e sentar surgiu algum indicio de que a eficiência seria pior. O alinhamento no joelho e os momentos adutores não sugerem maior magnitude de força no compartimento medial do joelho. Aparentemente, as características temporais sejam mais sensíveis à presença da OA no joelho do que a intensidade de ativação / The aim of this study is to investigate the biomechanical characteristics of patients with knee osteoarthritis (OA) and hoe it affects the ability to perform daily living activities. Thirty nine subjects participated in this study, 18 subjects with bilateral knee OA grade 3 Kellgren Lawrence scale) and 21 healthy individuals. Two force platforms (AMTI) were used to register the Grourd Reaction Force (GRF). Five cameras (System Vicon) were used to register the angular variations of the hip, knee and ankle in the sagittal and frontal planes. Five electromyographic electrodes (Noraxon System) were used to record the activities of the rectus femoris (RF), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA) and gastrocnemius lateralis (GL) in the dominant segment (D segment) on control group and the segment with greater severity of injury in individuals with OA (OA segment). Inverse dynamics was used to calculate joint moments sagittal and frontal planes. Three daily living activities were investigated, the gait, the Sit-to stand and Stand-to-sit and Stepping down from a 20cm height step. In results, there was a smaller angular variation in hip and knee joints. No difference was observed in the mechanical loads applied to the locomotor system. In the three daily activities, people with knee OA showed hip adduction and knee abduction, in the three daily activities, which suggests an alignment valgus in the knee. Few differences were observed in joint moments in the three daily living activities. In sit-to-stand and stand-to-sit lower peak extensor moments were observed in the knee. Few differences were observed in adductor moments in gait. In sit-to-stand and stand-to-sit, no difference was observed in knee adductor moments. In stepping down, the CL segment showed greater adductor moment than OA segment and D. In general, differences in muscle activation indicate greater activation intensity in the control group. The VL muscle showed lower activation intensity in individuals with OA in all three activities. A higher co-activation was observed in gait and in stepping down, but not in sit-to-stand and stand-to-sit. In gait the higher co-activation occurred subjects with knee OA in the three joints. In stepping down, higher co-activation occurred in the hip and knee. In the three activities, greater co-contraction was observed and especially in the knee. It can be concluded that changes in movement technique appears to be task dependent. Changes in movement technique in the sagittal plane were not enough to affect the control of the mechanical loads on gait and stepping down movements. Only in sit-to-stand and stand-to-sit some indication of worse efficiency to perform the task was observed. Knee alignment and knee adductor moments do not suggest greater magnitude of force in the medial compartment of the knee. Apparently, the temporal characteristics of muscle activity are more sensitive to the presence of knee OA than the intensity of activation

Title: Kinematic and kinetic analysis of artistic gymnastic jumps Objectives: The aim of my master thesis is execution of kinematic - kinetic analysis of jumps in artistic gymnastics, processing data, counting force moment, which does the rotation around ventrodorsal axis, means abduction and adduction motion and recount normalized moment (moment share by body weight). Methods: The kinematic - kinetic analysis of jumps in artistic gymnastics was done by using systems Qualysis Motion Capture System and Kistler. Results: We have been researching four different gymnastic jumps in this study. Four healthy individuals underwent the measurement. They have done each jump in free valid times. There was measured abduction moment of knee joint in each jump. Adduction moments were present only in 32 % cases and lot of them hasn't significant value. There was measured abduction moment in bounces in each jump, value of standardized adduction moment wasn't signifiant. There was measured just abduction moments in dismounts of non-rotational jumps. In dismounts of rotational jumps (around longitudinal axes) was measured abduction and also adduction moment. Values of normalized abduction moments were between 0,3 - 11 m2 .s-2 . Values of normalized adduction moments were between 0 - 10 m2 .s-2 . Highest values of...

Peanut, a major allergenic food, has life-threatening potential and is difficult to be totally avoided due to its common use in processed foods. Thermal processing can influence the allergenic properties of peanuts. However, the kinetics of the reactions caused by thermal processing has not been characterized. In our study, kinetics of the commonly used thermal processing methods on a commercial peanut cultivar (Virginia) using five time intervals was conducted. Water-soluble and SDS-sample buffer soluble proteins were extracted sequentially, and analyzed by sodium-dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and western-blot using human plasma containing IgE antibodies. The relationships between thermal processing (time) and log transformed water-soluble/total extractable major allergen content could be explained by a simple linear regression kinetic model for most of the processing methods (except high-pressure steaming). Among all the methods with optimal processing point, frying for 6 min had relatively lower IgE binding (linear epitopes) ratio may be due to the fact that this processing condition causing break down, cross-linking and aggregation of Ara h 2, and relatively lower solubility. Besides thermal processing, enzymatic processing also is considered to be an effective method in the allergenicity of peanuts. Eleven peanut lines (Coded MS-1~MS-11, MS-9 is the check and a common cultivar namely Valencia) were pre-screened from 122 peanut lines harvested in 2015 for allergen levels. These pre-screened lines were re-planted in 2016 for further analysis. One line, MS-7, was selected for lower Ara h 1 (8.5-9.5% of total protein) and Ara h 2 (4.2-6.6% of total protein) content in 2015 and 2016. Roasted MS-9 (check) peanut powders were used for enzymatic treatment for enzyme selection. A first order kinetic reaction model was conducted to describe the relationship between enzyme concentration (0-400AzU/g) and IgE-binding property reduction. Among eight food-grade enzymes, bromelain, papain and ficin hydrolysates had lower IgE-binding properties in terms of high IgE-binding property reducing rate (K, ≥ 0.4) and were selected for the following study. MS-7 (selected) & MS-9 (at level of 200AzU/g) hydrolyzed by three selected enzymes (200AzU/g) were used for IgE binding property comparison, TGase crosslinking and functional properties study. After hydrolyzed by the selected enzymes (200 AzU/g), the emulsion and foaming stabilities were decreased. Emulsion and foaming stabilities were increased in TGase (5U/g protein) crosslinked hydrolysates, which were even higher than soy protein isolate (SPI). The IgE-binding properties of TGase treated hydrolysates were similar to the hydrolysates without TGase treatment. MS-7 hydrolysates (with/without TGase) possessed less IgE-binding properties and similar functionality as compared with MS-9 hydrolysates.

A associação dos métodos cinéticos de análises e dos sistemas de análises em fluxo foi demonstrada em relação à determinação espectrofotométrica de ferro e vanádio em ligas Fe-V O método se baseia na influência de Fe2+ e VO2+ na taxa de oxidação de iodeto por dicromato sob condições ácidas; por esta razão o emprego do redutor de Jones foi necessário. Um sistema de análises por injeção em fluxo (FIA) e um sistema multi-impulsão foram dimensionados e avaliados. Em ambos os sistemas, a solução da amostra era inserida no fluxo transportador / reagente iodeto, e a solução de dicromato era adicionada por confluência. Sucessivas medidas eram realizadas durante a passagem da zona de amostra processada pelo detector, cada uma relacionada a uma diferente condição para o desenvolvimento da reação. O tratamento dos dados envolveu calibração multivariada, particularmente o algorítmo PLS. O sistema FIA se mostrou pouco adequado para as determinações multi-paramétricas, uma vez que os elementos de fluído resultantes da natureza de escoamento laminar não continham informações cinéticas suficientes para compor as etapas de modelagem. Por outro lado, MPFS mostrou que a natureza do fluxo pulsado resulta em melhorias nas figuras de mérito devido ao movimento caótico dos elementos de fluído. O sistema proposto é simples e robusto, capaz de analisar 50 amostras por hora, significando em um consumo de 48 mg KI por determinação. A duas primeiras variáveis latentes contém ca 94 % da informação analítica, mostrando que a dimensionalidade dupla intrínsica ao conjunto de dados. Os resultados se apresentaram concordantes com aqueles obtidos por espectrometria de emissão optica com plasma induzido em argônio. / Differential kinetic analysis can be implemented in a flow system analyser, and this was demonstrated in designing an improved spectrophotometric catalytic determination of iron and vanadium in Fe-V alloys. The method relied on the influence of Fe2+ and VO2+ on the rate of the iodide oxidation by Cr2O7 under acidic conditions; therefore the Jones reductor was needed. To this end, a flow injection system (FIA) and a multi-pumping flow system (MPFS) were dimensioned and evaluated. In both systems, the alloy solution was inserted into an acidic KI solution that acted also as carrier stream, and a dichromate solution was added by confluence. Successive measurements were performed during sample passage through the detector, each one related to a different yet reproducible condition for reaction development. Data treatment involved multivariate calibration by the PLS algorithm. The FIA system was less recommended for multi-parametric determination, as the laminar flow regimen could not provide suitable kinetic information. On the other hand, a MPFS demonstrated that pulsed flow led to enhance figures of merit due to chaotic movement of its fluid elements. The proposed MPFS system is very simple and rugged, allowing 50 samples to be run per hour, meaning 48 mg KI per determination. The first two latent variables carry ca 94 % of the analytical information, pointing out that the intrinsic dimensionality of the data set is two. Results are in agreement with inductively coupled argon plasma – optical emission spectrometry.

Análise cinética diferencial explora diferenças em taxas reacionais entre os analitos e um sistema reacional comum; etapas de separação prévia dos analitos podem então ser prescindidas. Sistemas de análise por injeção em fluxo (FIA) se afiguram como uma ferramenta importante para métodos envolvendo essa estratégia, pois permitem um controle preciso da dispersão de reagentes / amostras e da temporização. O objetivo deste trabalho foi então explorar estes dois aspectos favoráveis visando a determinação simultânea de cobre e de níquel, a partir de suas reações com o reagente cromogênico 5-Br-PADAP. Três alíquotas de amostra eram simultaneamente inseridas, por meio de um injetor proporcional, no fluxo transportador reagente (5-Br-PADAP 75 mg L-1 + sistema tampão 0,5 mol L-1 em ácido acético / acetato, pH 4,7) de um sistema FIA em linha única. Durante o transporte em direção ao detector, as zonas estabelecidas se coalesciam, originando uma zona complexa que era monitorada a 562 nm. Os valores locais máximos e mínimos da função concentração / tempo obtida eram considerados para calibração multivariada utilizando a ferramenta quimiométrica PLS-2 (partial least squares - 2). A concentração do reagente, a capacidade tampão, a temperatura, a vazão, os comprimentos do percurso analítico e das alças de amostragem, bem como a distância inicial entre as zonas de amostra estabelecidas foram avaliados para construção dos modelos matemáticos. Estes foram criados a partir de 24 soluções-padrão mistas de Cu2+ e Ni2+ (0,00-1,60 mg L-1 em HNO3 a 0,1% v/v). Duas variáveis latentes foram suficientes para capturar > 98 % das variâncias inerentes ao conjunto de dados e erros médios das previsões (RMSEP) foram estimados em 0,025 e 0,071 mg L-1 para Cu e Ni, salientando a boa precisão do modelo de calibração. O sistema proposto apresenta boas figuras de mérito: fisicamente estável, quando mantido em operação por quatro horas ininterruptas, consumo de 314 \'mü\'g 5-Br-PADAP por amostra, frequência analítica de 33 amostras por hora (165 dados, 66 determinações) e erros nas leituras em sinais de absorbância tipicamente < 5%. Entretanto, verificou-se a inexatidão das previsões efetuadas pelo modelo proposto, quando comparadas aos resultados obtidos por ICP OES. A partir deste fato, tornam-se necessários maiores estudos referentes a este tipo de matriz, bem como de técnicas de mascaramento dos possíveis interferentes presentes / Differential kinetic analysis exploits the differences in reaction rates between the analytes and a common reactant system; prior steps of analyte separation can then be waived. Flow-injection systems (FIA) are considered as an important tool for methods involving such a strategy because they allow precise control of sample / reagent dispersion and timing. The aim of this work was then to exploit these two favorable aspects for the simultaneous determination of copper and nickel using the 5-Br-PADAP chromogenic reagent. Three sample aliquots were simultaneously inserted by means of a proportional injector into reagent carrier stream (75 mg L-1 5-Br-PADAP + 0.5 mol L-1 acetic acid / acetate, pH 4.7) of a single-line FIA system. During transport towards detection, the established zones coalesce themselves, resulting in a complex zone that was monitored at 562 nm. The local maximum and minimum values of the concentration / time obtained function were considered for multivariate calibration using the PLS-2 (partial least squares - 2) chemometric tool. The reagent concentration, buffering capacity, temperature, flow rate and lengths of the analytical path, sampling loops and initial distance between plugs were established and evaluated for the construction of mathematical models. To this end, 24 Cu2+ and Ni2+ (0.00 - 1.60 mg L-1, also 0.1% v/v HNO3) mixed standard solutions were used. Two latent variables were enough to capture > 98% of the variance inherent in the data set and average prediction errors (RMSEP) were estimated as 0.025 and 0.071 mg L-1 for Cu and Ni, emphasizing the good precision the calibration model. The proposed system presents good figures of merit: physical stability when kept in operation for four uninterrupted hours, consumption of 314 \'mü\'g 5-Br-PADAP per sample, sample throughput of 33 h-1 (165 data, 66 determinations) and error readings in absorbance signals typically <5%. However, inaccuracy of the predictions made by the proposed model when compared to results obtained by ICP OES was noted. Thus, further studies involving this type of matrix, as well as masking techniques of potential interferences present, are recommended

Análise cinética diferencial explora diferenças em taxas reacionais entre os analitos e um sistema reacional comum; etapas de separação prévia dos analitos podem então ser prescindidas. Sistemas de análise por injeção em fluxo (FIA) se afiguram como uma ferramenta importante para métodos envolvendo essa estratégia, pois permitem um controle preciso da dispersão de reagentes / amostras e da temporização. O objetivo deste trabalho foi então explorar estes dois aspectos favoráveis visando a determinação simultânea de cobre e de níquel, a partir de suas reações com o reagente cromogênico 5-Br-PADAP. Três alíquotas de amostra eram simultaneamente inseridas, por meio de um injetor proporcional, no fluxo transportador reagente (5-Br-PADAP 75 mg L-1 + sistema tampão 0,5 mol L-1 em ácido acético / acetato, pH 4,7) de um sistema FIA em linha única. Durante o transporte em direção ao detector, as zonas estabelecidas se coalesciam, originando uma zona complexa que era monitorada a 562 nm. Os valores locais máximos e mínimos da função concentração / tempo obtida eram considerados para calibração multivariada utilizando a ferramenta quimiométrica PLS-2 (partial least squares - 2). A concentração do reagente, a capacidade tampão, a temperatura, a vazão, os comprimentos do percurso analítico e das alças de amostragem, bem como a distância inicial entre as zonas de amostra estabelecidas foram avaliados para construção dos modelos matemáticos. Estes foram criados a partir de 24 soluções-padrão mistas de Cu2+ e Ni2+ (0,00-1,60 mg L-1 em HNO3 a 0,1% v/v). Duas variáveis latentes foram suficientes para capturar > 98 % das variâncias inerentes ao conjunto de dados e erros médios das previsões (RMSEP) foram estimados em 0,025 e 0,071 mg L-1 para Cu e Ni, salientando a boa precisão do modelo de calibração. O sistema proposto apresenta boas figuras de mérito: fisicamente estável, quando mantido em operação por quatro horas ininterruptas, consumo de 314 \'mü\'g 5-Br-PADAP por amostra, frequência analítica de 33 amostras por hora (165 dados, 66 determinações) e erros nas leituras em sinais de absorbância tipicamente < 5%. Entretanto, verificou-se a inexatidão das previsões efetuadas pelo modelo proposto, quando comparadas aos resultados obtidos por ICP OES. A partir deste fato, tornam-se necessários maiores estudos referentes a este tipo de matriz, bem como de técnicas de mascaramento dos possíveis interferentes presentes / Differential kinetic analysis exploits the differences in reaction rates between the analytes and a common reactant system; prior steps of analyte separation can then be waived. Flow-injection systems (FIA) are considered as an important tool for methods involving such a strategy because they allow precise control of sample / reagent dispersion and timing. The aim of this work was then to exploit these two favorable aspects for the simultaneous determination of copper and nickel using the 5-Br-PADAP chromogenic reagent. Three sample aliquots were simultaneously inserted by means of a proportional injector into reagent carrier stream (75 mg L-1 5-Br-PADAP + 0.5 mol L-1 acetic acid / acetate, pH 4.7) of a single-line FIA system. During transport towards detection, the established zones coalesce themselves, resulting in a complex zone that was monitored at 562 nm. The local maximum and minimum values of the concentration / time obtained function were considered for multivariate calibration using the PLS-2 (partial least squares - 2) chemometric tool. The reagent concentration, buffering capacity, temperature, flow rate and lengths of the analytical path, sampling loops and initial distance between plugs were established and evaluated for the construction of mathematical models. To this end, 24 Cu2+ and Ni2+ (0.00 - 1.60 mg L-1, also 0.1% v/v HNO3) mixed standard solutions were used. Two latent variables were enough to capture > 98% of the variance inherent in the data set and average prediction errors (RMSEP) were estimated as 0.025 and 0.071 mg L-1 for Cu and Ni, emphasizing the good precision the calibration model. The proposed system presents good figures of merit: physical stability when kept in operation for four uninterrupted hours, consumption of 314 \'mü\'g 5-Br-PADAP per sample, sample throughput of 33 h-1 (165 data, 66 determinations) and error readings in absorbance signals typically <5%. However, inaccuracy of the predictions made by the proposed model when compared to results obtained by ICP OES was noted. Thus, further studies involving this type of matrix, as well as masking techniques of potential interferences present, are recommended

Ziel der vorliegenden Arbeit war die Entwicklung einer SNP-Genotypisierungsmethode mit auf Mikroarrays immobilisierten PCR-Produkten. Für die Analyse wurde ein faseroptischer Affinitätssensor bzw. ein Durchfluss-Biochip-Scanner mit integrierter Fluoreszenzdetektion verwendet. An den immobilisierten Analyten (PCR-Produkten) wurde eine Fluoreszenzoligonukleotidsonde hybridisiert und anschließend die Dissoziation der Sonde im Fluss verfolgt. Die Diskriminierung von Wildtyp- und Mutanten-DNA erfolgte durch die kinetische Auswertung der Dissoziationskurven sowie durch die Analyse der Fluoreszenzintensität. <br> <br> Die Versuche am faseroptischen Affinitätssensor zeigten, dass DNA-DNA-Hybride sowohl von Oligonukleotiden als auch von PCR-Produkten ein typisches Dissoziationsverhalten aufweisen, wobei fehlgepaarte Hybride eine signifikant schnellere Dissoziation zeigen als perfekt passende Hybride. Dieser Geschwindigkeitsunterschied lässt sich durch den Vergleich der jeweiligen kinetischen Geschwindigkeitskonstanten kD quantitativ erfassen. </p> <p>Da die Kopplung des Analyten an der Chipoberfläche sowie die Hybridisierungs- und Dissoziationsparameter essentiell für die Methodenentwicklung war, wurden die Parameter für ein optimales Spotting und die Immobilisierung von PCR-Produkten ermittelt. Getestet wurden die affine Kopplung von biotinylierten PCR-Produkten an Streptavidin-, Avidin- und NeutrAvidin-Oberflächen sowie die kovalente Bindung von phosphorylierten Amplifikaten mit der EDC/Methylimidazol-Methode. Die besten Ergebnisse sowohl in Spotform und -homogenität als auch im Signal/Rausch-Verhältnis wurden an NeutrAvidin-Oberflächen erreicht. </p> <p>Für die Etablierung der Mikroarray-Genotypisierungsmethode durch kinetische Analyse nach einem Hybridisierungsexperiment wurden Sondenlänge, Puffersystem, Spotting-Konzentration des Analyten sowie Temperatur optimiert. Das Analysensystem erlaubte es, PCR-Produkte mit einer Konzentration von 250 ng/µl in einem HEPES-EDTA-NaCl-Puffer auf mit NeutrAvidin beschichtete Glasträger zu spotten. In den anschließenden Hybridisierungs- und Dissoziationsexperimenten bei 30 °C konnte die Diskriminierung von homocygoter Wildtyp- und homocygoter Mutanten- sowie heterocygoter DNA am Beispiel von Oligonukleotid-Hybriden erreicht werden. </p> <p>In einer Gruppe von 24 homocygoten Patienten wurde ein Polymorphismus im SULT1A1-Gen analysiert. Sowohl durch kinetische Auswertung als auch mit der Analyse der Fluoreszenzintensität wurde der Genotyp der Proben identifiziert. Die Ergebnisse wurden mit dem Referenzverfahren, der Restriktionschnittstellenanalyse (PCR-RFLP) validiert. Lediglich ein Genotyp wurde falsch bestimmt, die Genauigkeit lag bei 96%. </p> <p>In einer Gruppe von 44 Patienten wurde der Genotyp eines SNP in der Adiponectin-Promotor-Region untersucht. Nach Vergleich der Analysenergebnisse mit denen eines Referenzverfahrens konnten lediglich 14 der untersuchten Genotypen bestätigt werden. Ursache für die unzureichende Genauigkeit der Methode war vor allem das schlechte Signal/Rausch-Verhältnis.</p> <p> Zusammenfassend kann gesagt werden, dass das in dieser Arbeit entwickelte Analysesystem für die Genotypisierung von Einzelpunktmutationen geeignet ist, homocygote Patientenproben zuverlässig zu analysieren. Prinzipiell ist das auch bei heterocygoter DNA möglich. Da nach aktuellem Kenntnisstand eine SNP-Analysemethode an immobilisierten PCR-Produkten noch nicht veröffentlicht wurde, stellt das hier entwickelte Verfahren eine Alternative zu bisher bekannten Mikroarray-Verfahren dar. Als besonders vorteilhaft erweist sich der reverse Ansatz der Methode. </p> <p>Der hier vorgestellte Ansatz ist eine kostengünstigere und weniger hoch dimensionierte Lösung für Fragestellungen beispielsweise in der Ernährungswissenschaft, bei denen meist eine mittlere Anzahl Patienten auf nur einige wenige SNPs zu untersuchen ist. Wenn es gelingt, durch die Weiterentwicklung der Hardware bzw. weiterer Optimierung, eine Verbesserung des Signal/Rausch-Verhältnisses und damit die Diskriminierung von heterocygoter DNA zu erreichen, kann diese Methode zukünftig bei der Analyse von mittelgroßen Patientengruppen alternativ zu anderen Genotypisierungsmethoden verwendet werden. / The aim of this thesis was the development of a SNP genotyping method involving PCR products immobilised on microarrays. For the analysis a fibre optic affinity biosensor and a flow-through biochip scanner were used. Fluorescent probes were hybridized with the immobilised PCR products. In order to start the dissociation process the surface was rinsed with buffer and the fluorescence intensity was measured. <br><br> Two different cases were studied: First, the full-matched DNA hybrid (wildtyp single strand with complementary wildtype single strand), second the mis-matched hybrid (wildtype single strand and mutant single strand). After determinating the reaction rates (kD) as kinetic parameter the kD values of both cases were compared. The experiments showed a significant difference in the kD value of the full- and the mis-match hybrids. Therefore, mutant and wildtype DNA were discriminated by kinetic analysis of the dissociation process and analysis of the fluorescence intensity. <br><br> To set up the complete analysis process the reaction parameters like coupling of the PCR products had to be optimised. Both affininty coupled (streptavidin, neutravidin, avidin - biotin) and covalent methods (EDC/methylimidazol) were carried out. Best results in spot homogeinity and spot appearance were obtained with coupling of biotinylated PCR products on neutravidin coated chip surfaces. Additionally, the length of the probe, the spotting concentration, the spotting buffer and the reaction temperature were optimised. In the optimised analysis PCR products (250 µg/µl) were spotted onto neutravidin coated surfaces. The hybridisation <br><br> and dissociation processes were carried out at 30°C. A HEPES-EDTA-NaCl buffer was used for spotting, diluting of the fluorescent probe and rinsing the microarray surface. A fluorescent probe was used with 13 nucleotides in length. The mis- or full-matching base indicating the polymorphism was located in the center position of the probe. <br><br> The analysis system was tested with the genomic DNA of a group of 24 homocygote individuals with a SNP in the SULT1A1 gene region. The hybridisation and dissociation processes were carried out and the reaction rates were determinated. Subsequently after the analysis in the flow-through biochip scanner the fluorescence intensity of the <br><br> spots were measured. The results showed very good comparability with results of a PCR-RFLP analysis (one false genotype). Additionally, a group of 44 heterocygote DNA samples with one SNP in the adiponectin promotor region were also genotyped. Compared to a reference method only 14 genotypes were correctly determined. This was mostly due to a low signal-noise-ratio and needs to be further investigated. <br><br> Besides the problem in analysing heterocygote DNA samples the developed analysis system is very useful for genotyping SNP in homocygote DNA samples. The successful analysis of heterocygote sample is principally possible and with further investigations/optimisation, a better analysis should be possible. <br><br> The most important advantage of the developed method is the reverse approach of binding PCR products at the surface instead of oligonucleotides. This allows the parallel genotyping of several individuals. Other advantages include low costs and medium sized dimensions in terms of throughput.

A associação dos métodos cinéticos de análises e dos sistemas de análises em fluxo foi demonstrada em relação à determinação espectrofotométrica de ferro e vanádio em ligas Fe-V O método se baseia na influência de Fe2+ e VO2+ na taxa de oxidação de iodeto por dicromato sob condições ácidas; por esta razão o emprego do redutor de Jones foi necessário. Um sistema de análises por injeção em fluxo (FIA) e um sistema multi-impulsão foram dimensionados e avaliados. Em ambos os sistemas, a solução da amostra era inserida no fluxo transportador / reagente iodeto, e a solução de dicromato era adicionada por confluência. Sucessivas medidas eram realizadas durante a passagem da zona de amostra processada pelo detector, cada uma relacionada a uma diferente condição para o desenvolvimento da reação. O tratamento dos dados envolveu calibração multivariada, particularmente o algorítmo PLS. O sistema FIA se mostrou pouco adequado para as determinações multi-paramétricas, uma vez que os elementos de fluído resultantes da natureza de escoamento laminar não continham informações cinéticas suficientes para compor as etapas de modelagem. Por outro lado, MPFS mostrou que a natureza do fluxo pulsado resulta em melhorias nas figuras de mérito devido ao movimento caótico dos elementos de fluído. O sistema proposto é simples e robusto, capaz de analisar 50 amostras por hora, significando em um consumo de 48 mg KI por determinação. A duas primeiras variáveis latentes contém ca 94 % da informação analítica, mostrando que a dimensionalidade dupla intrínsica ao conjunto de dados. Os resultados se apresentaram concordantes com aqueles obtidos por espectrometria de emissão optica com plasma induzido em argônio. / Differential kinetic analysis can be implemented in a flow system analyser, and this was demonstrated in designing an improved spectrophotometric catalytic determination of iron and vanadium in Fe-V alloys. The method relied on the influence of Fe2+ and VO2+ on the rate of the iodide oxidation by Cr2O7 under acidic conditions; therefore the Jones reductor was needed. To this end, a flow injection system (FIA) and a multi-pumping flow system (MPFS) were dimensioned and evaluated. In both systems, the alloy solution was inserted into an acidic KI solution that acted also as carrier stream, and a dichromate solution was added by confluence. Successive measurements were performed during sample passage through the detector, each one related to a different yet reproducible condition for reaction development. Data treatment involved multivariate calibration by the PLS algorithm. The FIA system was less recommended for multi-parametric determination, as the laminar flow regimen could not provide suitable kinetic information. On the other hand, a MPFS demonstrated that pulsed flow led to enhance figures of merit due to chaotic movement of its fluid elements. The proposed MPFS system is very simple and rugged, allowing 50 samples to be run per hour, meaning 48 mg KI per determination. The first two latent variables carry ca 94 % of the analytical information, pointing out that the intrinsic dimensionality of the data set is two. Results are in agreement with inductively coupled argon plasma – optical emission spectrometry.

In the first part of this doctoral thesis, a new analytical HPLC-MS/MS method for monitoring of concentration changes of 17β-estradiol (βE2) during in vitro mouse sperm capacitation was developed. Capacitation was performed for three initial concentrations of βE2 (200, 20 and 2 μg/L). For all the concentrations a similar trend for the total unbound βE2 was observed. In general, the βE2 concentration decreased to reach its minimum and then increased again. The position of the minimum differed for the individual tested βE2 concentrations. Experimentally obtained results were subjected to the kinetic analysis. The curves fitted through the experimentally determined points displayed an autocatalytic character. For the agreement between the curves obtained by fitting through the experimental points and the theoretical calculated curves, it is necessary to assume that the first step is adsorption of βE2 onto the surface of the sperm controlled by Langmuir isotherm. The kinetic study was also used to study the effects of fluorides and aluminium fluoride complexes on the capacitation of mouse sperm. The experimental points were in very good agreement with the shape of the theoretical curves and this fact verifies the mechanism of the mouse sperm capacitation kinetics. In the second part of this work, two...

Les poudres propulsives pour armes sont des matériaux énergétiques dont la combustion permet l’accélération de projectiles jusqu’à des vitesses importantes. Ces matériaux énergétiques sensibles peuvent être soumis à de fortes contraintes (chocs, impacts et incendies) lors de leur utilisation. Le remplacement de certaines substances entrant dans leur formulation permet de diminuer leur vulnérabilité. En conséquence, ces poudres propulsives présentent une dynamique d’allumage différente. Ce travail de recherches est consacré à l’allumage des poudres propulsives pour armes et se présente en quatre chapitres. Un état de l’art sur le sujet est réalisé. Il porte en particulier sur la phénoménologie de l’allumage, la caractérisation de poudres propulsives, et la modélisation de l’allumage. Deux poudres propulsives sont expérimentalement analysées par thermogravimétrie, calorimétrie et spectrométrie de masse. Cette analyse permet de caractériser les différentes étapes cinétiques de la dégradation thermique de ces poudres propulsives. Un code de modélisation biphasique 2D est développé pour servir de support à la comparaison de modèles d’allumage. Le modèle implémenté décrit la chambre de combustion du canon dans les premières phases du coup de canon, lorsque le lit de poudre propulsive est compacté et que les gaz issus du dispositif pyrotechnique d’allumage le parcourent. Un modèle d’allumage est développé à partir des résultats expérimentaux obtenus au deuxième chapitre. Le code de calcul précédemment évoqué permet de comparer l’influence de différents modèles sur la propagation de l’allumage. / Gun Propellants are energetic materials whose combustion can accelerate projectiles to high speeds. These sensitive energetic materials can be subjected to high stresses (shocks, impacts and fires), potentially able to ignite them. The modification of their chemical formulation reduces such vulnerability. Consequently, these propellants have different ignition dynamics. This work focuses on the ignition of gun propellants and comes in four chapters. A state of the art on the subject is firstly made. It focuses on the phenomenology of the ignition and on energetic materials experimental characterization, and modeling of their ignition. Two gun propellants are experimentally analyzed by thermogravimetry, calorimetry and mass spectrometry. This analysis allows characterizing the various stages of the degradation kinetics of these propellants. A 2D biphasic modeling code was developed to provide support for the comparison of ignition models. It describes the combustion chamber in the early stages of the gun firing, when the propellant bed is compacted and the gases from the pyrotechnic igniter are flowing through it. An ignition model is developed from the experimental data obtained in the second chapter. The previously mentioned modeling code allows comparing the influence of different ignition models on the spreading speed of the ignition signal through the packed bed of propellant.