Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

Nous avons étudié les films de Langmuir de copolymères PS-b-PAA et la formation de nanostructures inorganiques par réduction d’ions Ag+ à leur voisinage. D’une part, nous avons déterminé précisément la structure de ces copolymères à l’interface air-eau pour différents pH, à l’aide de techniques complémentaires (isothermes π-A, réflectivité de neutrons, diffusion de rayons x rasants). Cette étude a démontré que l’interprétation usuelle de ces isothermes devait être reconsidérée et en particulier nous avons mis en évidence le rôle majeur du solvant d’étalement. Ce dernier reste partiellement adsorbé à la surface après le dépôt, la monocouche mixte copolymère-solvant est alors formée de nanostructures de surface. Ces nanostructures ont de taille caractéristique bien. Lorsque les chaînes de PAA sont neutres, le pseudo-plateau observé sur les isothermes correspond à l’expulsion réversible du solvant vers la sous-phase ce qui induit une réorganisation des nanostructures. Dans le cas de chaînes de PAA chargées, l’isotherme ne présente plus ce pseudo-plateau. Ceci est dû aux répulsions électrostatiques entre ces chaînes. La compression du film entraîne le «plongeon» d’une partie de la monocouche, copolymère et solvant, vers le volume. D’autre part, nous avons étudié le comportement des films de copolymères chargés en présence d’ions Ag+ dans la sous-phase avant et après leur réduction. Nous avons montré que la présence d’ions Ag+ induit le collapse des chaînes PAA à l’interface. La réduction des ions par la radiolyse de surface via les rayons x, produit des colloïdes d’argent agrégés selon une structure 2D «bicontinue» de taille caractéristique marquée. En revanche, la réduction par photochimie ne semble pas produire de couche homogène et dense de colloïdes. / We studied the copolymer PS-b-PAA Langmuir films and the formation of non-organic nanostructures by reduction of silver ions Ag+ in their neighborhood. On the one hand, we have precisely determined the structure of these copolymers at the air-water interface for different pH with many complementary techniques (isothermal, ?-A, neutron reflectivity, grazing-incidence x-ray scattering). This study proved that the classic interpretation of these isotherms should be reconsidered and we emphasized the major role played by the spreading solvent. This (solvent) is partially absorbed by the surface after the deposit and the mixed copolymer-solvent monolayer is created by the surface nanostructure. These nanostructures have a well-defined typical size. When the PAA chains are neutral, the pseudo-surface observed on the isotherms correspond to the reversible expulsion of the solvent to a subphase which induces a reorganization of the nanostructures. In the case of charged PPA chains, the isotherm does not show the flat surface. This is due to the electrostatic repulsion between these chains. The compression of the film induces the ?dive? of a part of the monolayer ? copolymer and solvent ? towards the volume. On the other hand, we studied the behavior of these charged copolymer films in the presence of silver ions Ag+ in the before and after reduction. We showed that the presence of ions Ag+ ions induces the collapse of the PAA chains at the interface. The ions reduction by surface x-rays radiolysis produces silver colloids following a ?bi-continuous? 2D structure with a typical length scale. However, the photo-chemical reduction does not seem to produce homogenous and dense layers of colloids.

O presente trabalho apresenta um estudo sistemático sobre a adsorção e a eletrooxidação do CO sobre eletrodos monocristalinos de platina. A partir da análise das intensidades das bandas integradas e das freqüências do Pt(111)-CO, apresenta-se uma interpretação dos efeitos de acoplamento dipolo-dipolo e de interconversão do COads.. Assim, sobre a Pt(111) os espectros de FTIR in situ mostram que o aumento na razão da intensidade das bandas integradas ACOB/ACOL e nas freqüências do νCOB quando θCO,total diminue é devido à redução do acoplamento dipolo-dipolo entre as moléculas do CO em diferentes sítios e, adicionalmente, à interconversão das formas inclinadas dos COL e COB para a forma do COB. No sentido de explicar esta interconversão, propomos um mechanism baseado nas interações dos orbitais de fronteiras do CO e do metal, associado com a retrodoação de elétrons. Nesse modelo, os deslocamentos das formas inclinadas do COL e do COB em direção à forma do COB são favoráveis provavelmente porque a retrodoação de elétrons, Ptd → CO2π* (LUMO), aumenta quando θCO,total diminui. Experimentos potenciostáticos sugerem que a cinética de nucleação e crescimento é o melhor modelo para descrever a eletrooxidação do CO. Propomos que no potencial de oxidação, ECO oxi. pode existir uma via muito rápida de formação do precursores oxigenados e que este pode lateralmente colidir com as ilhas de CO, impedindo que ocorra a dissipação das ilhas do COads. no potencial de oxidação, ECO oxi.. Apresentamos a evolução do crescimento e da oxidação de sub-monocamada de CO sobre monocristais de platina facetados. Em baixo grau de recobrimento do CO foi observado que a adsorção dessa molécula ocorre sem ocupação preferencial de sítios quinas ou terraças. Assim, sugerimos que a adsorção é um processo randômico e que depois que as moléculas do CO são adsorvidas estas não apresentam apreciáveis deslocamentos a partir de CO-(111) em direção aos sítios CO-(110). Isto significa que depois da adsorção, as moléculas do CO têm um longo tempo de residência ou que apresentam um coeficiente de difusão muito baixo. Mas, para alto grau de recobrimento por CO, os resultados mostram que é possível que laterais interações desempanham importantes papéis na distribuição de ocupação dos sítios e observamos que durante a eletrooxidação, são liberados simultaneamente sítios quinas e sítios terraços. Quanto à pré-oxidação, foi observado que quatro condições experimentais precisam ser satisfeitas para que ela ocorra sobre os monocristais de platina: (i) alto grau de recobrimento por CO; (ii) que a superfície onde oncorre a oxidação do CO tenha defeitos, como sítios quinas (110); (iii) que a camada do CO seja formada sob potenciais mais negativos do que o potencial de carga total zero do metal; (iv) e que exista pequena quantidade de CO dissolvido. As condições (i) e (ii) precisam ser satisfeitas simultaneamente para promover a pré-oxidação do CO; as condições (iii) e (iv) essencialmente contribuem correspondendo à condição (i). Observamos que a magnitude do pre-pico aumenta com o aumento do grau de recobrimento por CO. Então, isto pode ser indicativo que a pré-oxidação não tem relação com a difusão do CO em superfície porque o aumento do grau de recobrimento reduz a probabilidade de difusão em superfície. O modelo de ilhas comprimidas parece ser mais apropriado para descrever a pré-oxidação do CO. / This work presents a systematic study on the CO adsorption and its oxidation at platinum single crystal electrodes. From analysis of integrated band intensity and band frequency position of the Pt(111)-CO interface in acid, it is presented an interpretation of the dipole-dipole coupling effect and surface site inter-conversions of COads.. Thus, on Pt(111), in situ FTIR data show that the increase in both ratio integrated band intensity ACOB/ACOL and frequency of νCOB when θCO,total reduces it is indicative of reduce in dipole-dipole coupling interactions between CO molecules in different surface active sites and a mechanism where the tilted COL and COB in CO pressed adlayer displace or inter-convert in favor of increase of COB concentration. In order to explain that CO interconversion, we propose a mechanism based in frontier molecular orbitals of CO and the orbitals of the metal associated with the electron back bond donation. Thus, the displacement of tilted COL and COB on the surface towards COB is more stable because probably the back bond electron donation, Ptd → CO2π* (LUMO), increase when θCO,total diminishes. Potentiostatic experiments suggest that the nucleation and growth is the better model to describe the CO oxidation. It is proposed here that close to ECO oxi. might there is a fast pathway toward formation of oxygenated species and it might reach the CO islands by side and this hinder the dissipation of COads. islands at ECO oxi.. We report also time evolution studies of low CO adsorption coverage and oxidative stripping on stepped platinum surfaces. In low CO coverage, it was observed that there is no preferential site occupancy for CO adsorption on step or terrace. It is proposed that CO adsorption onto these surfaces is a random process, and after CO adsorption there is no appreciable shift from CO-(111) to CO-(110) sites. This implies that after adsorption, CO molecules either have a very long residence time, or that the diffusion coefficient is much lower than previously thought. But, in high CO coverage, the results show that it is possible that the lateral interaction might play important role in CO site occupancy and it was observed that during the CO electrooxidation the sites released included both terrace (111) and step (110) orientations. Among the CO oxidation a clear CO preoxidation process also occurs. It was observed four experimental conditions which were verified to be fulfilled to promote CO pre-oxidation on platinum single crystal: (i) the CO coverage is should be higher than minimum threshold; (ii) the surface where CO oxidation take place should have defects, such as (110) steps; (ii) the CO monolayer should be formed at potentials below the potential of zero total charge; (iv) and in a small amount of dissolved CO should be present in the electrolyte solution. In both conditions (i) and (ii) are necessary to take place simultaneously to promote CO pre-oxidation, (iii) and (iv) essentially contribute in fulfilling condition (i). It was verified that the magnitude of pre-peak increases with the amount of CO coverage. Thus, this might indicate that the CO pre-oxidation is not having relationship with the CO diffusion on the surface, because the increase of CO coverage diminishes surface diffusion. A picture model of compressed CO islands seems the most to describe CO pre-oxidation.

A investigação dos mecanismos de interação dos vírus com as células do hospedeiro trazem informações relevantes para a identificação de alvos no desenvolvimento de drogas para impedir a penetração e/ou desenvolvimento dos vírus. Peptídeos desenhados a partir de proteínas virais foram desenvolvidos e testados quanto as suas capacidades de inibir o processo de fusão do vírus com a célula do hospedeiro. Alguns se encontram em fase de avaliação clínica. Anticorpos contra a proteína p24 do HIV-1 foram detectados no soro de pacientes HIV-positivos, e estes reconhecem pequenas seqüências peptídicas desta proteína. Neste trabalho foi analisada a interação entre uma seqüência peptídica correspondente aos aminoácidos 196-224 (AAMQMLKETINEEAAEWDRVHPVHAGPIA) da proteína p24, denominado p24- 1, com sistemas biomiméticos. Os sistemas utilizados foram filmes de Langmuir (monocamadas) de dipalmitoil fosfatidil colina (DPPC) e dipalmitoil fosfatidil glicerol (DPPG) e vesículas multilamelares (MLVs) de DPPC. O p24-1 encontra-se desorganizado em solução aquosa, mas com a interação com as MLVs de DPPC teve induzido uma conformação hélice ?, de acordo com o espectro de dicroísmo circular (CD). Esta característica foi confirmada pela predição de hélice a seguida por uma estrutura não ordenada contendo 11 resíduos do p24-1. As isotermas de pressão e potencial de superfície das monocamadas de DPPC foram afetadas com a presença de 0,05% mo1 de p24-1, com uma expansão de aproximadamente 5%. Para concentrações acima de 0,5% mo1 de p24-1 a expansão foi de 20%, com saturação do efeito da concentração. O efeito de expansão foi acompanhado por uma alteração na morfologia das monocamadas, estudados com microscopia no ângulo de Brewster (BAM). A incorporação do p24-1 impede a formação de grandes domínios de DPPC. O efeito cooperativo causado na monocamada de fosfolipídios pelo p24-1 sugere que esse tem um potencial na atividade antiviral por participar da expansão da membrana da célula hospedeira. / The investigation of the interaction mechanisms between the viruses and the host cells brings relevant information for the identification of targets on the development of drugs to prevent the penetration and/or development of the viruses. Peptides designed from viral proteins have been developed and tested on its capacities of inhibiting the merging process of the virus with the host cell. Some of them are in clinical evaluation. Antibodies against the protein p24 of the HIV-1 have been detected in the serum of HIV-positive patients, and they are able to recognize short peptide sequences of this protein. In this work, it was analyzed the interaction between a peptide sequence corresponding to amino acids 196-224 (AAMQMLKETINEEAAEWDRVHPVHAGPIA) of the protein p24, called p24- 1, and biomimetic systems. The systems used were Langmuir films (monolayers) of dipalmitoyl phosphatidyl choline (DPPC) and dipalmitoyl phosphatidyl glycerol (DPPG) and multilamelar vesicles (MLVs) of DPPC. p24-1 is found disorganized in watery solution, but with the interaction with the MLVs of DPPC it had induced a conformation ?-helix, according to the circular dichoism spectra (CD). This characteristic was confirmed by the prediction of ?-helix followed by an unordered structure with 11 residues of p24-1. The isotherms of pressure and potential of surface of the DPPC monolayers were affected by the presence of 0,05% mo1 of p24-1, with an expansion of approximately 5%. For concentrations above 0,5% mol of p24-1 the expansion was 20%, with saturation of the concentration effect. The expansion effect was followed by a morphologic alteration of the monolayers, studied with microscopy of the Brewster angle (BAM). The incorporation of p24-1 prevents the formation of large domains of DPPC. The cooperative effect caused in the phospholipid monolayer by p24-1 suggests that this peptide has a potential in the antiviral activity, once its participates on the expansion of the host cell membrane.

Estudos em interfaces são importantes para o completo entendimento de muitos processos em química, física e biologia. Esses sistemas são governados principalmente pelas propriedades interfaciais dos materiais. Nas duas últimas décadas, o desenvolvimento de novos métodos experimentais melhorou o nosso entendimento das propriedades interfaciais. O advento de uma série de técnicas de espectroscopia a laser baseadas em óptica não linear e o desenvolvimento das técnicas de microscopia por ponta de prova, possibilitaram estudos antes inimagináveis em superfícies e interfaces. Entre as técnicas de espectroscopia não linear, destacamos a espectroscopia por Geração de Soma de Frequências (espectroscopia SFG). Essa técnica foi desenvolvida por Shen et al. em 1987 e, desde então, é aplicada a muitos estudos em superfícies e interfaces. A espectroscopia SFG pode fornecer informações sobre a natureza química por meio do espectro vibracional e sobre o ordenamento médio das moléculas em uma única monocamada. O sinal SFG só pode ser gerado em meios não centrossimétricos, isso inclui superfícies ou interfaces entre meios centrossimétricos, onde há quebra da simetria de inversão. A combinação da espectroscopia SFG com a microscopia óptica tem sido proposta como uma nova técnica experimental para obter imagens em interfaces com sensibilidade química pelo espectro vibracional e contraste pela orientação e ordenamento das moléculas. Neste trabalho, apresentamos o desenvolvimento, construção e caracterização de um Microscópio SFG (MSFG). Esse MSFG foi especialmente projetado para estudos em superfícies ou interfaces tanto líquidas quanto sólidas. Testes iniciais de desempenho do MSFG foram realizados na interface líquido/ar da solução binária água/acetonitrila (H2O⁄CH3CN). Foram obtidas imagens do sinal SFG ressonante com o estiramento simétrico do grupo metil (CH3) da acetonitrila na interface líquido⁄ar da solução binária. Variando a fração molar da acetonitrila na solução entre 4% e 20% observamos a dependência da intensidade do sinal SFG na interface em função da fração molar de acetonitrila no volume do líquido. Testes também foram feitos em filmes Langmuir-Blodgett multicamada de ácido esteárico (CH3(CH2)16COOH). Obtivemos a espectromicroscopia SFG na ressonância dos grupos CH2 e CH3 do ácido graxo. Pelas diferenças entre os espectros SFG das regiões ordenadas e desordenadas, a espectromicroscopia revelou distribuições microscópicas do ordenamento das cadeias alquila que formam o filme. A sensibilidade da detecção do sinal SFG foi caracterizada e revelou a possibilidade de obter imagens na superfície da água em menos de um minuto. A caracterização óptica e os testes nas interfaces líquido⁄ar e sólido⁄ar demonstraram a completa capacidade do MSFG como ferramenta para investigar qualquer superfície ou interface, seja essa líquida ou sólida. / Interface studies are important for the complete understanding of many processes in chemistry, physics and biology. These systems are mainly governed by the interfacial properties of the materials. In the last two decades, the development of new experimental methods improved our understanding of interfacial properties. The advent of a host of laser spectroscopy techniques based on nonlinear optics and the development of the scanning probe microscopy techniques, opened up unimaginable possibilities of studies at surfaces and interfaces. Among these nonlinear spectroscopies we turned our attention to Sum Frequency Generation spectroscopy (SFG spectroscopy). This technique was developed by Shen et al. in 1987 and, since then, it has been applied to many studies of surfaces and interfaces. SFG spectroscopy can provide information about the chemical nature by the vibrational spectra and about the average of molecular ordering in a single monolayer. The SFG signal only can be generated in a noncentrossymetric media, this includes surfaces or interfaces between centrossymetric media, where there is a broken in the inversion symmetry. The combination of SFG spectroscopy with optical microscopy has been proposed as a novel experimental technique to obtain images at interfaces with chemical sensitivity by the vibrational spectra as well as contrast by the ordering and orientation of the molecules. In this work we present the development, construction and characterization of an SFG Microscope (SFGM). This SFGM was specially designed to perform studies on surfaces or interfaces of liquids and solids. Initial SFGM performance tests were performed at the liquid/air interface of the water/acetonitrile (H2O/CH3CN) binary solution. The images of the SFG signal were acquired on the resonance of the methyl group (CH3) of acetonitrile present at the liquid⁄air interface of the binary solution. By varying the molar fraction of acetonitrile in the solution between 4% and 20% we observed the dependency of the SFG signal intensity as a function the acetonitrile bulk mole fraction. We also performed tests in multi-layered Langmuir-Blodgett films of stearic acid (CH3(CH2)16COOH). We obtained the SFG spectromicroscopy in the resonance of CH2 and CH3 groups of the fatty acid. By the differences between the SFG spectra of ordered and disordered regions, the spectromicroscopy revealed microscopic distribution of the conformational ordering in the alkyl chains that composes the film. The sensitivity of the SFG microscope was characterized and it was shown that images could be acquired at the water surface in less than one minute. The optical characterization and the performed tests at the liquid/air and solid/air interfaces demonstrated the full capabilities of the SFGM as a tool for investigations in any liquid or solid interface.

In dieser Arbeit wurden Gold- und PlatinNanopartikel in sphärischen Polyelektolyt-Bürsten (SPB) synthetisiert. Diese wurden zu mechanistischen Untersuchungen der p-Nitrophenol-Reduktion mittels Natriumborhydrid herangezogen. Dabei konnte der Mechanismus der Reaktion auf der Oberfläche der Nanopartikel aufgeklärt werden. Die Reaktion folgt einem Langmuir Hinshelwood (LH) Mechanismus. Hierbei adsorbieren beide Edukte auf die Oberfläche, bevor sie im zu p-Aminophenol umgesetzt werden. Nach der Reaktion desorbiert das Reaktionsprodukt. Mittels des LH Modells konnten für verschiedene Temperaturen die intrinsische Geschwindigkeitskonstante, sowie die Adsorptionskonstanten der Edukte bestimmt werden. Mit diesen Daten konnten dann die Enthalpie und Entropie der Adsorption der Edukte und die Aktivierungsenergie berechnet werden. Neben dem Reaktionsmechanismus wurde die Induktionszeit der p-Nitrophenol Reduktion untersucht. Hierbei konnte gezeigt werden, dass diese Totzeit der Reaktion wahrscheinlich auf eine Restrukturierung der Nanopartikeloberfläche zurückzuführen ist. Sie ist unabhängig von den eingesetzten Konzentrationen des Borhydrids, hingegen abhängig von der Konzentration an p-Nitrophenol auf der Oberfläche der Nanopartikel, was auf Restrukturierung der Nanopartikel durch p-Nitrophenol hindeutet. Zudem wurden Hinweise auf eine spontane Rekonstruktion der Nanopartikel gefunden, die unabhängig von der Konzentration des p-Nitrophenols ist. Des Weiteren wurde die katalytische Oxidation von Morin mit Manganoxid Nanopartikeln untersucht. Diese sind in der Polyelektrolytschale der SPB immobilisiert. Analysen der Reaktionskinetik der Morin Oxidation ergaben, dass auch in diesem Fall der LH Mechanismus vorliegt. Hierbei konnten die Adsorptionskonstanten und Geschwindigkeitskonstanten für verschiedene Temperaturen ermittelt werden und somit die Aktivierungsenergie der Oxidation sowie die Adsorptionsenthalpie und Entropie der Edukte. / In this work, gold and platinum nanoparticles were synthesized into spherical polyelectrolyte brushes (SPB) in order to apply them as catalysts for kinetic studies of the reduction of p-nitrophenol by sodium borohydride. It was found that the reaction follows the Langmuir-Hinshelwood (LH) mechanism where both educts must adsorb onto the surface of the catalyst in order to react. Thereby, the rate determining step is the surface reaction of both educts. After the reaction, the product desorbs from the surface and a free active site is formed. With this model the intrinsic reaction rate and the adsorption constants for both educts could be determined. The measurements at different temperatures allowed the calculation of the activation energy and the adsorption enthalpy and entropy of the educts. Besides the reaction mechanism, the induction time of the reaction was analyzed. Here, it was shown that the reason of this delay time is a restructuring of the nanoparticle surface. The induction time is solely dependent on the concentration of p-nitrophenol on the surface of the nanoparticles and independent of the applied concentrations of borohydride. Moreover, hints for a spontaneous reconstruction of the nanoparticles without p-nitrophenol were found. In the second part, the catalytic oxidation of morin by manganese oxide has been studied. These nanoparticles were embedded inside the polyelectrolyte layer of the SPB. These nanoparticles were used for systematic studies of the oxidation of morin with hydrogen peroxide. It was shown that in this case the reaction followed a LH kinetics as well. Here, the intrinsic rate constants and the adsorption constants could be obtained for different temperatures. The activation energy and the adsorption enthalpy and entropy could be determined accordingly. The adsorption enthalpy is exothermic in both cases.

Ausgangspunkt dieser vorliegenden Arbeit waren bisherige Untersuchungen unseres Arbeitskreises zum Memb-ranverankerungsverhalten (Phospholipidmembranen, LUV) von Nukleosiden und Oligonukleotiden, welche einen lipophilen Anker an der 5-Position der Pyrimidin- oder an der 8-Position der Purinbase tragen. Diese Nukleolipide ankern gut in der Membran, stehen aber nicht mehr für eine Watson-Crick-Basenpaarung an der Phasengrenzfläche zu Verfügung. Demnach wurde durch die Verwendung unterschiedlicher Reaktionen (Veresterung, Thioetherbildung, Carbamoylverknüpfung oder „Clickreaktion“ zu Triazolen) und verschiedener funktioneller Gruppen (Hydroxy, Thiohydroxy, Azid, Amin) an die 2´-Position der Nukleoside eine Reihe von lipophilen Resten (Alkylketten, Cholesterol, Pyren) eingeführt. Diese Konjugate verankerten ebenfalls gut in den Membranen und es zeigten sich erste Hinweise, dass durch die Einführung eines Spacers zwischen dem Nukleosid und dem lipophilen Anker, eine Basenpaarung an der Phasengrenzfläche möglich ist. Weiterhin zeigte es sich, dass Nukleolipide mit nur einem lipophilen Rest nicht stabil in Membranen verankern, vor allem, wenn dieser nicht verzweigt ist. Bei der Anwendung von Oligonukleotiden zum Ankern in Membranen ist es unbedeu-tend, an welcher Stelle der lipophile Rest am Nukleotid vorkommt, denn zum einen geht das entsprechende Nukleolipid selbst keine Basenpaarung ein und zum anderen erfolgt keine Basenpaarung über dieses hinweg. Für biotechnologische Anwendungen konnte mit Hilfe dieser synthetisierten lipophilen Oligonukleotide gezeigt werden, dass zwei vesikelmembranverankerte Oligonukleotide, welche komplementäre Enden tragen, eine Doppelhelix miteinander bilden und so diese beiden Vesikel auf einen definierten Abstand halten können. Da Nukleolipide einen amphiphilen Charakter aufweisen, sollte unter dem AFM untersucht werden, ob diese supramolekulare Strukturen zeigen. Dies wurde in der Tat auch beobachtet. Ebenso konnten mittels der LB-Technik LB-Schichten aus Nukleolipiden dargestellt werden. / The starting point of this work was found in our previous studies about anchoring behaviour of lipidated nucleo-sides and oligonucleotides in biocompatible phospholipid membranes (LUV). That nucleosides and oligonucleotides bear a lipophilic anchor at the 5-position of pyrimidine or at the 8-position of purinbases. This nucleolipi-des anchor well in such membranes, but were not longer available for a Watson-Crick base pairing at the interface to water. Therefore lipophilic groups (alkyl chain, cholesterol, Pyren etc.) were now connected to the 2''-position of nucleosides by several reactions (esterification, thioether binding, carbamoyl binding or "click reaction") and various functional groups (hydroxy, thiohydroxy, azide, amine) to the 2´-position of nucleosides. These nucleolipides also well anchored in the model membranes, and gave first evidence that by introducing a spacer between the nucleoside and the lipophilic anchor a base pairing at the interface to water is possible. However, only one anchor is not sufficient for a stable anchoring in the phospholipid membranes, especially if they are not branched. It was found out that it is insignifacant for the application of oligonucleotides in membrane anchoring, at which position of nucleotide the lipid is attached, because on the one hand, the corresponding nucleolipid can not form a pair with a corresponding nucleobase and secondly, there is no base pairing in the nucleotides situated between two lipidated positions. For biotechnology applications it might be interesting that two different vesicles each of it furnushed with a complementary lipidated oligonucleotide could be kept together in a defined distance by forming double strand DNA. Since nucleolipide possess amphiphilic character, there abillity to form supramolecular structures was investigated by atomic force microscope (AFM). In addition formation of LB-layers could be achieved by LB-technology.

As coberturas de hidroxiapatita (HAp) são utilizadas para aumentar a osteointegração em implantes de titânio (Ti), devido à sua capacidade de promover a biomineralização para corrigir defeitos esqueléticos e craniofaciais. O objetivo desta pesquisa foi avaliar a influência dos revestimentos sobre culturas primárias de osteoblastos. Na primeira fase de estudos, desenvolvemos uma nova abordagem de revestimento baseada em filmes Langmuir-Blodgett (LB) de dihexadecilfosfato (DHP) e ácido octadecilfosfônico (OPA) depositados em discos Ti, e crescimento subsequente de cristais de HAp. Analisamos a viabilidade dos osteoblastos, a atividade da fosfatase alcalina (ALP) e a formação da matriz mineralizada por métodos colorimétricos e a morfologia das culturas por microscopia eletrônica de varredura e microscopia confocal. Os resultados revelaram que o revestimento DHP/HAp aumentou a viabilidade dos osteoblastos até 150% em comparação com o controle em todos os dias testados. O revestimento OPA/HAp promoveu a maior viabilidade ao 14 dias (190%). A atividade de ALP foi aumentada apenas pelo revestimento de DHP/HAp ao 14º dia em comparação com o controle e Ti limpo. A microscopia eletrônica de varredura e as microfotografias confocais revelaram diferenças morfológicas entre os osteoblastos cultivados em ambos os revestimentos, aumentando o seu número e o espalhamento. O revestimento de DHP/HAp aumentou a produção de nódulos biomineralizados. O ensaio de biomineralização pela técnica do Vermelho de Alizarina mostrou que o revestimento de OPA/HAp possuía uma concentração de cálcio (Ca2+) 1,88 vezes superior à cobertura de DHP/HAp. Uma vez que a literatura relata que o Ca2+ pode estimular ou inibir a atividade da ALP e, consequentemente, o processo de biomineralização, as diferenças no comportamento desses dois revestimentos podem estar relacionadas às diferenças de concentração de superfície de Ca2+. O bom desempenho do revestimento de DHP/HAp pode estar relacionado às características da composição química, adicionada à técnica de deposição LB. Na segunda fase da pesquisa, as monocamadas de Langmuir de DHP e dipalmitoil fosfatidilcolina (DPPC) foram testadas e utilizadas para incorporar o paratormônio 1-34 (PTH 1-34) (DHP/Ca+PTH e DPPC/Ca+PTH, respectivamente). Também foram testadas as ações dos revestimentos DHP/HAp com PTH em solução (DHP/HAp+PTH S) e gotejado (DHP/HAp+PTH G) em culturas de osteoblastos. Um potencial zeta negativo em pH 7,4 foi encontrado (-14,9 mV) para o PTH 1-34. A isoterma de DPPC mostrou um aumento da área mínima ocupada por molécula lipídica após a injeção de PTH na subfase de água (50 ?L de solução 0,5 mg/mL) em 10,97 Å2, o que pode ser devido à inserção de PTH neste filme. A área mínima de DHP foi alterada em 2,3 Å2, o que não é estatisticamente significativo. A análise de QCM mostrou um depósito de 72,5 ng de PTH em filme de DPPC e 29,3 ng de PTH em filme de DHP para cada 25 ?g de PTH injetado na cuba de Langmuir. A viabilidade celular e a formação da matriz mineralizada de culturas de osteoblastos crescidas em DHP/Ca+PTH e revestimentos DPPC/Ca+PTH diminuíram quando comparadas com Ti limpo. Os revestimentos DHP/HAp+PTH S e DHP/HAp+PTH G mostraram ser tão eficientes quanto o Ti DHP/HAp para estimular o processo de biomineralização. Mas a cobertura de DHP/HAp+PTH G aumentou a viabilidade dos osteoblastos e a formação de matriz mineralizada quando comparada com Ti DHP/HAp. Esta é uma cobertura inovadora que abre precedentes para o uso da técnica de gotejamento em HAp para outros hormônios e drogas que agem sobre o tecido ósseo. / Due to their ability to promote biomineralization, Hydroxyapatite (HAp) coatings are used to increase the osteointegration in titanium (Ti) implants, in order to correct skeletal and craniofacial defects. The objective of the research was to evaluate the influence of the coatings on osteoblasts primary cultures. In the first phase of the research we developed a new coating approach based on Langmuir-Blodgett (LB) films of dihexadecyl phosphate (DHP) and octadecylphosphonic acid (OPA) deposited on Ti discs and subsequent growth of HAp crystals. We analyzed the osteoblast viability, alkaline phosphatase (ALP) activity and mineralized matrix formation by colorimetric methods, and the morphology of the cultures by scanning electron microscopy and confocal micrographies. The results revealed that the DHP/HAp coating increased osteoblast viability up to 150% compared to the control at all days tested. The OPA/HAp coating promoted the highest viability on the 14th day (190%). The ALP activity was enhanced only by the DHP/HAp coating on the 14th day compared to control, and clean Ti. To explore the morphology of the cells, the scanning electron microscopy and confocal micrographies were obtained, and revealed morphological differences between osteoblasts grown on both coated Ti compared to clean Ti. Both coatings increased the number and spreading of osteoblasts, while the DHP/HAp coating enhanced the production of biomineralized nodules. The Alizarin Red assay showed that OPA/HAp coating has 1.88 times higher calcium (Ca2+) concentration than DHP/HAp. The same test confirmed the increase of mineralization only by DHP/HAp coating compared to clean Ti. Since literature reports that Ca2+ can stimulate or inhibit the ALP activity and consequently, the biomineralization process, the differences on the behavior of these two coatings could be related to the Ca2+ surface concentration differences. The good performance of the DHP/HAp coating can be explained due to the characteristics of the chemical composition, added to the LB deposition technique. In the second phase of the research, Langmuir monolayers of DHP and dipalmitoyl phosphatidylcholine (DPPC) was tested and used to incorporate 1-34 parathyroid hormone (PTH 1-34) (DHP/Ca+PTH, and DPPC/Ca+PTH, respectively). DHP/HAp coatings with PTH in solution (DHP/HAp+PTH S), and dropped (DHP/HAp+PTH G) also were tested on osteoblasts cultures. A negative zeta-potential at pH 7.4 was found (-14.9 mV) to PTH 1-34. The Langmuir isotherm of DPPC showed an increase of the minimum area occupied per lipid molecule after the PTH injection into the water subphase (50 ?L of 0.5 mg/mL solution) by 10.97 Å2, which could be due to the insertion of PTH in this film. The DHP minimum area changed by 2.3 Å2, which is not statistically significant. The QCM analysis showed the deposit of 72.5 ng of PTH on DPPC film, and 29.3 ng of PTH on DHP film for each 25 ?g of PTH injected into the Langmuir trough. The cell viability and matrix mineralization of osteoblasts cultures grown on DHP/Ca+PTH, and DPPC/Ca+PTH coatings decreased when compared to clean Ti. DHP/HAp+PTH S and DHP/HAp+PTH G coatings proved to be as efficient as Ti DHP/HAp to stimulate the biomineralization process. But DHP/HAp+PTH G increased the osteoblast viabilitiy and formation of mineralized matrix when compared to Ti DHP/HAp. This is an innovative coating that sets the precedent for the use of the drip technique on HAp for other hormones and drugs that act on bone tissue.

"The ablative Teflon pulsed plasma thruster (PPT) is an onboard electromagnetic propulsion enabling technology for small spacecraft missions. The integration of PPTs onboard spacecraft requires the understanding and evaluation of possible thruster/spacecraft interactions. To aid in this effort the work presented in this thesis is directed towards the development and application of Langmuir probe techniques for use in the plume of PPTs. Double and triple Langmuir probes were developed and used to measure electron temperature and density of the PPT plume. The PPT used in this thesis was a laboratory model parallel plate ablative Teflon® PPT similar in size to the Earth Observing (EO-1) PPT operating in discharge energies between 5 and 40 Joules. The triple Langmuir probe was operated in the current-mode technique that requires biasing all three electrodes and measuring the resulting probe currents. This new implementation differs from the traditional voltage-mode technique that keeps one probe floating and requires a voltage measurement that is often susceptible to noise in the fluctuating PPT plume environment. The triple Langmuir probe theory developed in this work incorporates Laframboise’s current collection model for Debye length to probe radius ratios less than 100 in order to account for sheath expansion effects on ion collection, and incorporates the thin-sheath current collection model for Debye length to probe radius ratios greater than 100. Error analysis of the non-linear system of current collection equations that describe the operation of the current-mode triple Langmuir probe is performed as well. Measurements were taken at three radial locations, 5, 10, and 15 cm from the Teflon® surface of the PPT and at angles of 20 and 40 degrees to either side of the thruster centerline as well as at the centerline. These measurements were taken on two orthogonal planes, parallel and perpendicular to the PPT electrodes. A data-processing software was developed and implements the current-mode triple Langmuir probe theory and associated error analysis. Results show the time evolution of the electron temperature and density. Characteristic to all the data is the presence of hot electrons of approximately 5 to 10 eV at the beginning of the pulse, occurring near the peak of the discharge current. The electron temperature quickly drops off from its peak values to 1-2 eV for the remainder of the pulse. Peak electron densities occur after the peak temperatures. The maximum electron density values on the centerline of the plume of a laboratory PPT 10 cm from the Teflon® surface are 6.6x10^19 +/- 1.3x10^19 m^-3 for the 5 J PPT, 7.2x10^20 +/- 1.4x10^20 m^-3 for the 20 J PPT, and 1.2x10^21 +/- 2.7x10^20 m^-3 for the 40 J PPT. Results from the double Langmuir probe taken at r=10 cm, theta perpendicular=70 degrees and 90 degrees of a laboratory PPT showed good agreement with the triple probe method."

L’objectif de cette thèse est de contrôler les propriétés optiques des nanoparticules d’or greffées de polymère en modulant les propriétés structurales de la couche protectrice de polymères. Des nanoparticules greffées de polymères thermosensibles avec une large gamme de masse molaire et différents degrés d’hydrophobicité sont synthétisées par la méthode de « grafting-to ». La DNPA est utilisée pour caractériser les propriétés structurales de la couche protectrice de polymère. Les spectres d’absorption sont modélisés en utilisant la théorie de Mie. Nous démontrons que la sensibilité de la SPR à la propriété diélectrique du solvant diminue progressivement avec la fraction volumique de la couche de polymère jusqu’à devenir quasi-nulle; dans ce dernier cas de figure, la SPR est dite « gelée » par la couche de polymère. Un déplacement significatif de la bande de SPR vers le rouge est induit (un changement de couleur se produit) dû à une transition de collapse de la couche de polymère avec la température. La gamme de température pour induire ce déplacement dépend du degré d’hydrophobicité du polymère et de la salinité. Une partie important de cette thèse est également consacrée aux propriétés des nanoparticules d’or greffées de polymères à l’interface air-eau. La technique de Langmuir est utilisée pour former des films minces dont la distance entre particule est contrôlée par la compression, la longueur des chaînes du polymère greffé et la température. Les propriétés structurales des films minces sont étudiées en déterminant la conformation de la couche de polymère greffée et l’organisation du cœur de l’or par la réflectivité de neutron et de X, respectivement. Les mesures de réflectivité nous permettent également d’évaluer et d’améliorer la stabilité des films minces pour un meilleur control de la distance entre particule, aspect important pour l’optimisation de la SPR. Enfin, les propriétés optiques des nanoparticules d’or à l’interface sont mesurées par des mesures de transmission. / In this thesis, the objective is to control the polymer-grafted gold nanoparticles optical properties (SPR) by tuning the protecting polymer shell structural properties. Gold nanoparticles grafted with thermosensitive polymers with a large range of molecular masses and different degrees of hydrophobicity are synthesized by “grafting-to” technique. SANS is employed to characterize the protecting polymer shell structural properties. The absorption spectra are modeled using the Mie Dipolar theory. It is shown that the gold nanoparticle sensitivity to external solvent is progressively reduced with increasing polymer volume fraction of the nanocomposite until the SPR is frozen by the polymer shell. In this case, the SPR mode becomes insensitive to the dielectric properties of the solvent. SPR is also red-shifted (a color change occurs) by thermally inducing the collapse of the polymer shell. The temperature and the extent of the red-shift are controlled by the graft polymer hydrophobicity and salinity. An important part of this thesis is also dedicated to the polymer-protected gold nanoparticles behaviour at the air-water interface. The Langmuir balance technique is used to build interfacial layers whose interparticle distance is modulated by compression, polymer graft chain length and temperature. The interfacial layer structural properties are determined by studying both the polymer graft layer conformation and the gold core organization with neutron and X-ray reflectivities. These reflectivitity measurements also enable us to evaluate and ameliorate the surface layers stability for a better control of the interparticle distance that is important for optimizing the SPR of the surface layer.