Made available in DSpace on 2014-12-17T15:01:31Z (GMT). No. of bitstreams: 1 MayaraOL_DISSERT.pdf: 2406797 bytes, checksum: e542f1e52029a933cac4b8af8d311ef3 (MD5) Previous issue date: 2012-12-27 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / This work depicts a study of the adsorption of carbon dioxide on zeolite 13X. The activities were divided into four stages: study batch adsorption capacity of the adsorbent with synthetic CO2 (4%), fixed bed dynamic evaluation with the commercial mixture of gases (4% CO2, 1.11% CO, 1 2% H2, 0.233% CH4, 0.1% C3, 0.0233% C4 argon as inert closing balance), fixed bed dynamic modeling and evaluation of the breakthrough curve of CO2 originated from the pyrolysis of sewage sludge. The sewage sludge and the adsorbent were characterized by analysis TG / DTA, SEM, XRF and BET. Adsorption studies were carried out under the following operating conditions: temperature 40 ?C (for the pyrolysis of the sludge T = 600 ?C), pressures of 0.55 to 5.05 bar (batch process), flow rate of the gaseous mixture between 50 - 72 ml/min and the adsorbent masses of 10, 15 and 20 g (fixed bed process). The time for the adsorption batch was 7 h and on the fixed bed was around 180 min. The results of this study showed that in batch adsorption process step with zeolite 13X is efficient and the mass of adsorbed CO2 increases with the increases pressure, decreases with temperature increases and rises due the increase of activation temperature adsorbent. In the batch process were evaluated the breakthrough curves, which were compared with adsorption isotherms represented by the models of Langmuir, Fre?ndlich and Toth. All models well adjusted to the experimental points, but the Langmuir model was chosen in view of its use in the dynamic model does not have implications for adsorption (indeterminacy and larger number of parameters such as occurred with others) in solving the equation. In the fixed bed dynamic study with the synthetic gas mixture, 20 g of mass adsorbent showed the maximum adsorption percentage 46.7% at 40 ?C temperature and 50 mL/min of flow rate. The model was satisfactorily fitted to the three breakthrough curves and the parameters were: axial dispersion coefficient (0.0165 dm2/min), effective diffusivity inside the particle (dm2/min 0.0884) and external transfer coefficient mass (0.45 dm/min). The breakthrough curve for CO2 in the process of pyrolysis of the sludge showed a fast saturation with traces of aerosols presents in the gas phase into the fixed bed under the reaction process / O presente trabalho retrata um estudo da adsor??o de di?xido de carbono em ze?lita comercial do tipo 13X. As atividades desenvolvidas foram divididas em quatro etapas: estudo em batelada da capacidade de adsor??o do adsorvente com o CO2 sint?tico (4%), avalia??o din?mica em leito fixo com a mistura sint?tica de gases (4% CO2, 1,11% CO, 1,2% H2, 0,233% CH4, 0,1% C3, 0,0233% C4 e arg?nio como inerte fechando o balan?o), modelagem din?mica em leito fixo e avalia??o em leito fixo da curva de ruptura do CO2 com o g?s de pir?lise do lodo de esgoto. O lodo e o adsorvente foram caraterizados por an?lises TG/DTA, MEV, FRX e BET. Os estudos de adsor??o foram realizados nas seguintes condi??es operat?rias: temperatura de 40 ?C (para a pir?lise do lodo T = 600 ?C), press?o de 0,55 5,05 bar (processo batelada), vaz?o da mistura gasosa entre 50 72 mL/min e massa de adsorvente igual a 10, 15 e 20 g (processo em leito fixo). O tempo do processo de adsor??o em batelada foi de 7h e em leito fixo foi em torno de 180 min. Os resultados obtidos nesta etapa mostraram que no estudo batelada o processo de adsor??o com a ze?lita 13X ? eficiente e que a massa adsorvida do CO2 aumenta com o crescimento da press?o, diminui com o aumento da temperatura e se eleva com a temperatura de ativa??o do adsorvente. No processo din?mico foram avaliadas as curvas de rupturas, as quais foram comparadas ?s isotermas de adsor??o representadas pelos modelos de Langmuir, Fre?ndlich e Toth. Todos os modelos se ajustaram bem aos pontos experimentais, por?m o modelo de Langmuir foi o escolhido tendo em vista sua utiliza??o no modelo din?mico de adsor??o n?o apresentar implica??es (indetermina??o e maior n?mero de par?metros como ocorreu com os demais) na resolu??o da equa??o. No estudo din?mico em leito fixo com a mistura de gases sint?ticos e diferentes massas de adsorvente, a massa de 20 g apresentou maior percentual de adsor??o 46,7% na temperatura de 40 oC e vaz?o da mistura gasosa de 50 mL/min. O modelo se ajustou satisfatoriamente para as tr?s curvas de ruptura e os par?metros avaliados foram: coeficiente de dispers?o axial (0,0165 dm2/min), difusividade efetiva no interior da part?cula (0,0884 dm2/min) e coeficiente externo de transfer?ncia de massa (0,45 dm/min). A curva de ruptura para o CO2 constru?da no processo de pir?lise do lodo mostrou uma r?pida satura??o do leito proveniente de tra?os de aeross?is, presentes na fase gasosa, decorrentes do processo reacional

As coberturas de hidroxiapatita (HAp) são utilizadas para aumentar a osteointegração em implantes de titânio (Ti), devido à sua capacidade de promover a biomineralização para corrigir defeitos esqueléticos e craniofaciais. O objetivo desta pesquisa foi avaliar a influência dos revestimentos sobre culturas primárias de osteoblastos. Na primeira fase de estudos, desenvolvemos uma nova abordagem de revestimento baseada em filmes Langmuir-Blodgett (LB) de dihexadecilfosfato (DHP) e ácido octadecilfosfônico (OPA) depositados em discos Ti, e crescimento subsequente de cristais de HAp. Analisamos a viabilidade dos osteoblastos, a atividade da fosfatase alcalina (ALP) e a formação da matriz mineralizada por métodos colorimétricos e a morfologia das culturas por microscopia eletrônica de varredura e microscopia confocal. Os resultados revelaram que o revestimento DHP/HAp aumentou a viabilidade dos osteoblastos até 150% em comparação com o controle em todos os dias testados. O revestimento OPA/HAp promoveu a maior viabilidade ao 14 dias (190%). A atividade de ALP foi aumentada apenas pelo revestimento de DHP/HAp ao 14º dia em comparação com o controle e Ti limpo. A microscopia eletrônica de varredura e as microfotografias confocais revelaram diferenças morfológicas entre os osteoblastos cultivados em ambos os revestimentos, aumentando o seu número e o espalhamento. O revestimento de DHP/HAp aumentou a produção de nódulos biomineralizados. O ensaio de biomineralização pela técnica do Vermelho de Alizarina mostrou que o revestimento de OPA/HAp possuía uma concentração de cálcio (Ca2+) 1,88 vezes superior à cobertura de DHP/HAp. Uma vez que a literatura relata que o Ca2+ pode estimular ou inibir a atividade da ALP e, consequentemente, o processo de biomineralização, as diferenças no comportamento desses dois revestimentos podem estar relacionadas às diferenças de concentração de superfície de Ca2+. O bom desempenho do revestimento de DHP/HAp pode estar relacionado às características da composição química, adicionada à técnica de deposição LB. Na segunda fase da pesquisa, as monocamadas de Langmuir de DHP e dipalmitoil fosfatidilcolina (DPPC) foram testadas e utilizadas para incorporar o paratormônio 1-34 (PTH 1-34) (DHP/Ca+PTH e DPPC/Ca+PTH, respectivamente). Também foram testadas as ações dos revestimentos DHP/HAp com PTH em solução (DHP/HAp+PTH S) e gotejado (DHP/HAp+PTH G) em culturas de osteoblastos. Um potencial zeta negativo em pH 7,4 foi encontrado (-14,9 mV) para o PTH 1-34. A isoterma de DPPC mostrou um aumento da área mínima ocupada por molécula lipídica após a injeção de PTH na subfase de água (50 ?L de solução 0,5 mg/mL) em 10,97 Å2, o que pode ser devido à inserção de PTH neste filme. A área mínima de DHP foi alterada em 2,3 Å2, o que não é estatisticamente significativo. A análise de QCM mostrou um depósito de 72,5 ng de PTH em filme de DPPC e 29,3 ng de PTH em filme de DHP para cada 25 ?g de PTH injetado na cuba de Langmuir. A viabilidade celular e a formação da matriz mineralizada de culturas de osteoblastos crescidas em DHP/Ca+PTH e revestimentos DPPC/Ca+PTH diminuíram quando comparadas com Ti limpo. Os revestimentos DHP/HAp+PTH S e DHP/HAp+PTH G mostraram ser tão eficientes quanto o Ti DHP/HAp para estimular o processo de biomineralização. Mas a cobertura de DHP/HAp+PTH G aumentou a viabilidade dos osteoblastos e a formação de matriz mineralizada quando comparada com Ti DHP/HAp. Esta é uma cobertura inovadora que abre precedentes para o uso da técnica de gotejamento em HAp para outros hormônios e drogas que agem sobre o tecido ósseo. / Due to their ability to promote biomineralization, Hydroxyapatite (HAp) coatings are used to increase the osteointegration in titanium (Ti) implants, in order to correct skeletal and craniofacial defects. The objective of the research was to evaluate the influence of the coatings on osteoblasts primary cultures. In the first phase of the research we developed a new coating approach based on Langmuir-Blodgett (LB) films of dihexadecyl phosphate (DHP) and octadecylphosphonic acid (OPA) deposited on Ti discs and subsequent growth of HAp crystals. We analyzed the osteoblast viability, alkaline phosphatase (ALP) activity and mineralized matrix formation by colorimetric methods, and the morphology of the cultures by scanning electron microscopy and confocal micrographies. The results revealed that the DHP/HAp coating increased osteoblast viability up to 150% compared to the control at all days tested. The OPA/HAp coating promoted the highest viability on the 14th day (190%). The ALP activity was enhanced only by the DHP/HAp coating on the 14th day compared to control, and clean Ti. To explore the morphology of the cells, the scanning electron microscopy and confocal micrographies were obtained, and revealed morphological differences between osteoblasts grown on both coated Ti compared to clean Ti. Both coatings increased the number and spreading of osteoblasts, while the DHP/HAp coating enhanced the production of biomineralized nodules. The Alizarin Red assay showed that OPA/HAp coating has 1.88 times higher calcium (Ca2+) concentration than DHP/HAp. The same test confirmed the increase of mineralization only by DHP/HAp coating compared to clean Ti. Since literature reports that Ca2+ can stimulate or inhibit the ALP activity and consequently, the biomineralization process, the differences on the behavior of these two coatings could be related to the Ca2+ surface concentration differences. The good performance of the DHP/HAp coating can be explained due to the characteristics of the chemical composition, added to the LB deposition technique. In the second phase of the research, Langmuir monolayers of DHP and dipalmitoyl phosphatidylcholine (DPPC) was tested and used to incorporate 1-34 parathyroid hormone (PTH 1-34) (DHP/Ca+PTH, and DPPC/Ca+PTH, respectively). DHP/HAp coatings with PTH in solution (DHP/HAp+PTH S), and dropped (DHP/HAp+PTH G) also were tested on osteoblasts cultures. A negative zeta-potential at pH 7.4 was found (-14.9 mV) to PTH 1-34. The Langmuir isotherm of DPPC showed an increase of the minimum area occupied per lipid molecule after the PTH injection into the water subphase (50 ?L of 0.5 mg/mL solution) by 10.97 Å2, which could be due to the insertion of PTH in this film. The DHP minimum area changed by 2.3 Å2, which is not statistically significant. The QCM analysis showed the deposit of 72.5 ng of PTH on DPPC film, and 29.3 ng of PTH on DHP film for each 25 ?g of PTH injected into the Langmuir trough. The cell viability and matrix mineralization of osteoblasts cultures grown on DHP/Ca+PTH, and DPPC/Ca+PTH coatings decreased when compared to clean Ti. DHP/HAp+PTH S and DHP/HAp+PTH G coatings proved to be as efficient as Ti DHP/HAp to stimulate the biomineralization process. But DHP/HAp+PTH G increased the osteoblast viabilitiy and formation of mineralized matrix when compared to Ti DHP/HAp. This is an innovative coating that sets the precedent for the use of the drip technique on HAp for other hormones and drugs that act on bone tissue.

Estudos em interfaces são importantes para o completo entendimento de muitos processos em química, física e biologia. Esses sistemas são governados principalmente pelas propriedades interfaciais dos materiais. Nas duas últimas décadas, o desenvolvimento de novos métodos experimentais melhorou o nosso entendimento das propriedades interfaciais. O advento de uma série de técnicas de espectroscopia a laser baseadas em óptica não linear e o desenvolvimento das técnicas de microscopia por ponta de prova, possibilitaram estudos antes inimagináveis em superfícies e interfaces. Entre as técnicas de espectroscopia não linear, destacamos a espectroscopia por Geração de Soma de Frequências (espectroscopia SFG). Essa técnica foi desenvolvida por Shen et al. em 1987 e, desde então, é aplicada a muitos estudos em superfícies e interfaces. A espectroscopia SFG pode fornecer informações sobre a natureza química por meio do espectro vibracional e sobre o ordenamento médio das moléculas em uma única monocamada. O sinal SFG só pode ser gerado em meios não centrossimétricos, isso inclui superfícies ou interfaces entre meios centrossimétricos, onde há quebra da simetria de inversão. A combinação da espectroscopia SFG com a microscopia óptica tem sido proposta como uma nova técnica experimental para obter imagens em interfaces com sensibilidade química pelo espectro vibracional e contraste pela orientação e ordenamento das moléculas. Neste trabalho, apresentamos o desenvolvimento, construção e caracterização de um Microscópio SFG (MSFG). Esse MSFG foi especialmente projetado para estudos em superfícies ou interfaces tanto líquidas quanto sólidas. Testes iniciais de desempenho do MSFG foram realizados na interface líquido/ar da solução binária água/acetonitrila (H2O⁄CH3CN). Foram obtidas imagens do sinal SFG ressonante com o estiramento simétrico do grupo metil (CH3) da acetonitrila na interface líquido⁄ar da solução binária. Variando a fração molar da acetonitrila na solução entre 4% e 20% observamos a dependência da intensidade do sinal SFG na interface em função da fração molar de acetonitrila no volume do líquido. Testes também foram feitos em filmes Langmuir-Blodgett multicamada de ácido esteárico (CH3(CH2)16COOH). Obtivemos a espectromicroscopia SFG na ressonância dos grupos CH2 e CH3 do ácido graxo. Pelas diferenças entre os espectros SFG das regiões ordenadas e desordenadas, a espectromicroscopia revelou distribuições microscópicas do ordenamento das cadeias alquila que formam o filme. A sensibilidade da detecção do sinal SFG foi caracterizada e revelou a possibilidade de obter imagens na superfície da água em menos de um minuto. A caracterização óptica e os testes nas interfaces líquido⁄ar e sólido⁄ar demonstraram a completa capacidade do MSFG como ferramenta para investigar qualquer superfície ou interface, seja essa líquida ou sólida. / Interface studies are important for the complete understanding of many processes in chemistry, physics and biology. These systems are mainly governed by the interfacial properties of the materials. In the last two decades, the development of new experimental methods improved our understanding of interfacial properties. The advent of a host of laser spectroscopy techniques based on nonlinear optics and the development of the scanning probe microscopy techniques, opened up unimaginable possibilities of studies at surfaces and interfaces. Among these nonlinear spectroscopies we turned our attention to Sum Frequency Generation spectroscopy (SFG spectroscopy). This technique was developed by Shen et al. in 1987 and, since then, it has been applied to many studies of surfaces and interfaces. SFG spectroscopy can provide information about the chemical nature by the vibrational spectra and about the average of molecular ordering in a single monolayer. The SFG signal only can be generated in a noncentrossymetric media, this includes surfaces or interfaces between centrossymetric media, where there is a broken in the inversion symmetry. The combination of SFG spectroscopy with optical microscopy has been proposed as a novel experimental technique to obtain images at interfaces with chemical sensitivity by the vibrational spectra as well as contrast by the ordering and orientation of the molecules. In this work we present the development, construction and characterization of an SFG Microscope (SFGM). This SFGM was specially designed to perform studies on surfaces or interfaces of liquids and solids. Initial SFGM performance tests were performed at the liquid/air interface of the water/acetonitrile (H2O/CH3CN) binary solution. The images of the SFG signal were acquired on the resonance of the methyl group (CH3) of acetonitrile present at the liquid⁄air interface of the binary solution. By varying the molar fraction of acetonitrile in the solution between 4% and 20% we observed the dependency of the SFG signal intensity as a function the acetonitrile bulk mole fraction. We also performed tests in multi-layered Langmuir-Blodgett films of stearic acid (CH3(CH2)16COOH). We obtained the SFG spectromicroscopy in the resonance of CH2 and CH3 groups of the fatty acid. By the differences between the SFG spectra of ordered and disordered regions, the spectromicroscopy revealed microscopic distribution of the conformational ordering in the alkyl chains that composes the film. The sensitivity of the SFG microscope was characterized and it was shown that images could be acquired at the water surface in less than one minute. The optical characterization and the performed tests at the liquid/air and solid/air interfaces demonstrated the full capabilities of the SFGM as a tool for investigations in any liquid or solid interface.

O presente trabalho apresenta um estudo sistemático sobre a adsorção e a eletrooxidação do CO sobre eletrodos monocristalinos de platina. A partir da análise das intensidades das bandas integradas e das freqüências do Pt(111)-CO, apresenta-se uma interpretação dos efeitos de acoplamento dipolo-dipolo e de interconversão do COads.. Assim, sobre a Pt(111) os espectros de FTIR in situ mostram que o aumento na razão da intensidade das bandas integradas ACOB/ACOL e nas freqüências do νCOB quando θCO,total diminue é devido à redução do acoplamento dipolo-dipolo entre as moléculas do CO em diferentes sítios e, adicionalmente, à interconversão das formas inclinadas dos COL e COB para a forma do COB. No sentido de explicar esta interconversão, propomos um mechanism baseado nas interações dos orbitais de fronteiras do CO e do metal, associado com a retrodoação de elétrons. Nesse modelo, os deslocamentos das formas inclinadas do COL e do COB em direção à forma do COB são favoráveis provavelmente porque a retrodoação de elétrons, Ptd → CO2π* (LUMO), aumenta quando θCO,total diminui. Experimentos potenciostáticos sugerem que a cinética de nucleação e crescimento é o melhor modelo para descrever a eletrooxidação do CO. Propomos que no potencial de oxidação, ECO oxi. pode existir uma via muito rápida de formação do precursores oxigenados e que este pode lateralmente colidir com as ilhas de CO, impedindo que ocorra a dissipação das ilhas do COads. no potencial de oxidação, ECO oxi.. Apresentamos a evolução do crescimento e da oxidação de sub-monocamada de CO sobre monocristais de platina facetados. Em baixo grau de recobrimento do CO foi observado que a adsorção dessa molécula ocorre sem ocupação preferencial de sítios quinas ou terraças. Assim, sugerimos que a adsorção é um processo randômico e que depois que as moléculas do CO são adsorvidas estas não apresentam apreciáveis deslocamentos a partir de CO-(111) em direção aos sítios CO-(110). Isto significa que depois da adsorção, as moléculas do CO têm um longo tempo de residência ou que apresentam um coeficiente de difusão muito baixo. Mas, para alto grau de recobrimento por CO, os resultados mostram que é possível que laterais interações desempanham importantes papéis na distribuição de ocupação dos sítios e observamos que durante a eletrooxidação, são liberados simultaneamente sítios quinas e sítios terraços. Quanto à pré-oxidação, foi observado que quatro condições experimentais precisam ser satisfeitas para que ela ocorra sobre os monocristais de platina: (i) alto grau de recobrimento por CO; (ii) que a superfície onde oncorre a oxidação do CO tenha defeitos, como sítios quinas (110); (iii) que a camada do CO seja formada sob potenciais mais negativos do que o potencial de carga total zero do metal; (iv) e que exista pequena quantidade de CO dissolvido. As condições (i) e (ii) precisam ser satisfeitas simultaneamente para promover a pré-oxidação do CO; as condições (iii) e (iv) essencialmente contribuem correspondendo à condição (i). Observamos que a magnitude do pre-pico aumenta com o aumento do grau de recobrimento por CO. Então, isto pode ser indicativo que a pré-oxidação não tem relação com a difusão do CO em superfície porque o aumento do grau de recobrimento reduz a probabilidade de difusão em superfície. O modelo de ilhas comprimidas parece ser mais apropriado para descrever a pré-oxidação do CO. / This work presents a systematic study on the CO adsorption and its oxidation at platinum single crystal electrodes. From analysis of integrated band intensity and band frequency position of the Pt(111)-CO interface in acid, it is presented an interpretation of the dipole-dipole coupling effect and surface site inter-conversions of COads.. Thus, on Pt(111), in situ FTIR data show that the increase in both ratio integrated band intensity ACOB/ACOL and frequency of νCOB when θCO,total reduces it is indicative of reduce in dipole-dipole coupling interactions between CO molecules in different surface active sites and a mechanism where the tilted COL and COB in CO pressed adlayer displace or inter-convert in favor of increase of COB concentration. In order to explain that CO interconversion, we propose a mechanism based in frontier molecular orbitals of CO and the orbitals of the metal associated with the electron back bond donation. Thus, the displacement of tilted COL and COB on the surface towards COB is more stable because probably the back bond electron donation, Ptd → CO2π* (LUMO), increase when θCO,total diminishes. Potentiostatic experiments suggest that the nucleation and growth is the better model to describe the CO oxidation. It is proposed here that close to ECO oxi. might there is a fast pathway toward formation of oxygenated species and it might reach the CO islands by side and this hinder the dissipation of COads. islands at ECO oxi.. We report also time evolution studies of low CO adsorption coverage and oxidative stripping on stepped platinum surfaces. In low CO coverage, it was observed that there is no preferential site occupancy for CO adsorption on step or terrace. It is proposed that CO adsorption onto these surfaces is a random process, and after CO adsorption there is no appreciable shift from CO-(111) to CO-(110) sites. This implies that after adsorption, CO molecules either have a very long residence time, or that the diffusion coefficient is much lower than previously thought. But, in high CO coverage, the results show that it is possible that the lateral interaction might play important role in CO site occupancy and it was observed that during the CO electrooxidation the sites released included both terrace (111) and step (110) orientations. Among the CO oxidation a clear CO preoxidation process also occurs. It was observed four experimental conditions which were verified to be fulfilled to promote CO pre-oxidation on platinum single crystal: (i) the CO coverage is should be higher than minimum threshold; (ii) the surface where CO oxidation take place should have defects, such as (110) steps; (ii) the CO monolayer should be formed at potentials below the potential of zero total charge; (iv) and in a small amount of dissolved CO should be present in the electrolyte solution. In both conditions (i) and (ii) are necessary to take place simultaneously to promote CO pre-oxidation, (iii) and (iv) essentially contribute in fulfilling condition (i). It was verified that the magnitude of pre-peak increases with the amount of CO coverage. Thus, this might indicate that the CO pre-oxidation is not having relationship with the CO diffusion on the surface, because the increase of CO coverage diminishes surface diffusion. A picture model of compressed CO islands seems the most to describe CO pre-oxidation.

Le manuscrit présente une étude de la réponse non linéaire de films moléculaires chiraux. Ces recherches s'inscrivent dans le contexte général d'une meilleure compréhension de la brisure de symétrie dans les films moléculaires et l'apparition de la chiralité. Ces systèmes moléculaires laissent envisager des perspectives intéressantes notamment le développement d'une nouvelle technologie de guides optiques chiraux.Dans un premier temps, la description des systèmes moléculaires, la fabrication des films ainsi que la modélisation de la réponse non linéaire sont présentées. Dans une seconde partie, les études menées sur des monocouches moléculaires formées sur une interface liquide ont démontré la possibilité de suivre la transition entre une chiralité intrinsèque à la molécule vers une chiralité supramoléculaire induite par une compression mécanique de la monocouche. Il s'avère que ce processus est réversible si la compression du film n'est pas maintenue. Dans une troisième partie, l'analyse du signal optique non linéaire provenant de films solides minces a mis en avant la présence d'une structuration et d'une orientation particulière des molécules dans ce film / The manuscript presents a study of the nonlinear response of chiral molecular films. This research is within the general context of a better understanding of the symmetry breaking in molecular films and the emergence of chirality. These molecular systems presage interesting perspectives including the development of a new chiral optical guides technology.Initially, we describe molecular systems, films formation as well as the modeling of the nonlinear response. In the second part, studies of molecular monolayers formed on a liquid interface demonstrated the ability to monitor the transition between intrinsic chirality of molecule to a supramolecular chirality induced by mechanical compression of the monolayer. It turns out that this process is reversible if the films compression is not maintained. In the third part, the analysis of the nonlinear optical signal from thin solid films bring out the presence of a particular structure and orientation of molecules in the film

Les contextes mondiaux énergétiques, climatiques et économiques actuels évoluent de manières telles que le dihydrogène H2 prend une place de plus en plus importante en tant que combustible et vecteur énergétique. Le dihydrogène est un gaz incolore, inodore et non-toxique donc indécelable par les sens humains, mais il est extrêmement inflammable et explosif. De plus, H2 est caractérisé par un domaine d'explosivité très large, de 4 % à 75 % de H2 dans l'air. L'objet de ce travail de thèse a donc été de préparer des capteurs de sécurité ou de quantification originaux et ayant des performances accrues pour la détection de H2. Les capteurs préparés sont de types résistifs et les métaux sensibles utilisés sont le palladium et le platine. Afin d'améliorer les performances de détection de ces capteurs à dihydrogène, plusieurs morphologies de couches sensibles ont été conçues : des monocouches organisées à 2 dimensions de nanoparticules cœurs-coquilles Pd@Au et Pt@Au formées par la méthode de Langmuir-Blodgett ou immobilisés sur les substrats par un agent de couplage de type silane (mercaptopropyltrimethoxysilane), des dépôts physiques à 2 dimensions et des films de nanoparticules à 3 dimensions. Selon la morphologie de la couche préparée et le type de métal sensible utilisé, divers mécanismes de détection ont été mis en évidence et diverses performances de détection ont été observées (type et amplitude de réponse, gamme de détection, temps de réponse et de retour,...). Les modèles de Fuchs-Sondheimer et Mayadas-Shatzkes d'une part, et un modèle de percolation par la création de chemins de conduction d'autre part, ont permis d'expliquer les variations de résistivité électrique des couches sensibles à base respectivement de platine et de palladium lors de l'exposition à l'hydrogène. / Hydrogen takes is foreseen as a generalized fuel and energy carrier. It is a colorless, odorless and non-toxic gas, and therefore it is undetectable by the human senses. Hydrogen has a severe drawback as it is an extremely flammable and explosive gas. Moreover, H2 has a wide explosive range, from 4 to 75 % H2 in air. Therefore, the aim of this PhD work was to develop safety and concentration sensors with enhanced performances. Resistive sensing layers were designed on several morphologies and sensing materials : 2D Langmuir-Blodgett organized monolayers of core-shell Pd@Au or Pt@Au nanoparticles, immobilized Pd@Au monolayer grafted through a self assembled monolayer, evaporated 2D metal films of Pt or Pd, and 3D platinum nanoparticles arrays. According to the sensing layer morphology and sensing metal, numerous sensing mechanisms and performances were demonstrated (response type and amplitude, sensing range, response and recovery times,…). Fuchs-Sondheimer and Mayadas-Shatzkes models on the one hand, and a percolation model on the other, allowed the origin of electrical resistance changes to be pointed out, respectively for platinum and palladium sensing layers.

Orientador: João Ruggiero Neto / Resumo: Os peptídeos sintéticos L1A (IDGLKAIWKKVADLLKNT-NH2, Q = +3e) e seu análogo acetilado (acL1A, Q = +2e) utilizados neste estudo foram projetados para que tenham características estruturais semelhantes ao peptídeo Polybia-MP1 extraído do veneno da vespa Polybia paulista, em que um dos dois resíduos ácidos ocupa a segunda posição na região Nterminal, e resíduos básicos são terceiros e/ou quartos vizinhos dos resíduos ácidos. Esses peptídeos possuem significativa atividade bactericida seletiva para bactérias Gram-negativas, especialmente Escherichia coli, sem serem hemolíticos. Estudos anteriores, em sistemas modelo, demonstraram que a acetilação do N-terminal resultou no aumento da atividade lítica em vesículas aniônicas (8POPC/2POPG) em comparação com o L1A, o que sugeriu perturbação do empacotamento lipídico de modo mais eficaz para o análogo que é menos carregado. Considerando que a membrana plasmática de bactérias Gram-negativas contém majoritariamente fosfatidiletanolamina (PE) e fosfatidilglicerol (PG), o presente trabalho propôs investigar o impacto dos peptídeos L1A e acL1A em membranas modelo compostas por 3POPE/1DOPG utilizando uma variedade de técnicas experimentais. Os resultados demonstraram que ambos os peptídeos induziram segregação lipídica, sendo o análogo acetilado mais eficiente em recrutar PG e segregar PE. / Abstract: The synthetic peptides L1A (IDGLKAIWKKVADLLKNT-NH2, Q = +3e) and its acetylated analog (acL1A, Q = +2e) used in this study were designed to have some structural features similar to the peptide Polybia-MP1 extracted from the venom of the wasp Polybia paulista, in which one of the acidic residues occupies the second position on the N-terminus region and basic residues are third and/or fourth neighbors of the acidic residues. These peptides display significant bactericidal activity against Gram-negative bacteria, especially Escherichia coli, being non-hemolytic. Previous work performed in model membrane systems has shown that the N-terminal acetylation led to an increase on the lytic activity in anionic vesicles (8POPC/2POPG) compared with L1A, suggesting that the less charged peptide has higher ability to perturb the lipid-packing. Considering that the Gram-negative cell membranes contain mainly phosphatidylethanolamine (PE) and phosphatidylglycerol (PG), the present work proposed to investigate the impact of L1A and acL1A on model membranes composed of 3POPE/1DOPG using a variety of experimental techniques. The results suggested that both peptides induced lipid segregation being the acetylated analog more efficient in recruiting PG and segregating PE. / Mestre

Gegenstand der vorliegenden Arbeit ist die Entwicklung, Synthese und Charakterisierung neuartiger oligofunktionalisierter Amphiphile mit potentiellen Sammler- und LB-Filmbildungseigenschaften. Basierend auf dem entwickelten Konzept der supramolekularen Strukturbildung zum Aufbau präorganisierter und gebündelter Sammleraggregate wurden zwei Typen neuartiger oligofunktioneller Tenside synthetisiert, die sich insbesondere in ihrer konformativen Flexibilität und Hydrophilie-Lipophilie-Balance unterscheiden. Ausgeprägte oberflächenaktive Eigenschaften wurden bei den bi-, tri- und tetrafunktionellen Aminosäure-analogen Zielverbindungen (Typ II) mit linearer, trigonaler und tetragonaler Molekülstruktur gefunden. Diese Verbindungen bilden auch stabile monomolekulare Filme geringer Heterogenität aus. Im mineralischen Flotationsprozess ergeben diese präorganisierten Tenside mit geometrisch kontrollierter Positionierung der lateralen Funktionseinheiten im Vergleich zu konventionellen Sammlern bei spezifischem Verhalten eine bemerkenswerte Steigerung der flotativen Effizienz.

Les poumons présentent de nombreux avantages en tant que voie d’administration de médicaments. Ils possèdent une grande surface (70-100 m2) pour l’adsorption de molécules et de particules, une mince barrière épithéliale, une faible acidité ainsi qu’un système vasculaire sous-jacent abondant. L’administration par inhalation est une approche prometteuse pour le traitement du cancer des poumons et des infections microbiennes comorbides dans 33% des cas puisqu’elle permet la livraison ciblée d’agents chimiothérapeutiques. Les nanoparticules sont des vecteurs idéaux d’acheminements ciblés de médicaments avec des avantages tels qu’une stabilité élevée/une longue durée de conservation ainsi qu’une capacité de transport élevée. Les nanoparticules inhalées atteignant les alvéoles pulmonaires interagissent avec le surfactant pulmonaire. Ce mélange de lipides et de protéines tapisse l’interface eau/air des alvéoles servant ainsi de barrière. L’interaction physique et chimique des nanoparticules avec le surfactant pulmonaire déterminera leur clairance, rétention et translocation. Nous proposons l’utilisation de nanoparticules de phytoglycogène, extraites de maïs sans OGM, pour l’administration pulmonaire d’un peptide anticancéreux et antimicrobien à double action dont l’administration par voie orale ou par injection est problématique. Le nanophytoglycogène, composé de molécules de glucose, est non-biopersistant, non-toxique et est certifié GRAS (Generally Recognized as Safe) par le Food and Drug Administration pour l’ingestion. Cependant, son innocuité pour l’inhalation reste à déterminer. Avant de déterminer l’efficacité du nanophytoglycogène à des fins de nanotransporteur organique pour la délivrance par aérosol de peptides thérapeutiques, son impact sur les propriétés biophysiques et sur la structure de phase du surfactant pulmonaire doit premièrement être caractérisé. L’objectif du projet est d’étudier les effets de nanophytoglycogène de différentes charges sur les propriétés physicochimiques de modèles du surfactant pulmonaire en utilisant les monocouches Langmuir. Plus précisément, il est question d’étudier les effets des nanoparticules sur l’activité de surface, la morphologie, la réversibilité ainsi que l’épaisseur du film du surfactant pulmonaire. L’imagerie par microscopie à angle de Brewster (BAM, Brewster Angle Microscopy), les isothermes (pression de surface vs aire moléculaire) ainsi que l’ellipsométrie à l’interface eau-air permettent une conjecture des effets néfastes potentielles du nanophytoglycogène sur les poumons. À l’aide de ces techniques, il a été possible d’étudier des monocouches de phospholipides et de protéines, représentant le surfactant pulmonaire. En présence de nanoparticules anioniques et quasi-neutres, les différentes monocouches ne subissaient aucune perturbation. Cependant, les résultats ont démontré que les nanoparticules cationiques se lient aux phospholipides anioniques, ce qui augmente l’épaisseur de la monocouche et ainsi le travail requis pour effectuer un cycle respiratoire. Ces travaux ont démontré l’importance de la charge des nanomatériaux lors de leur interaction avec le surfactant pulmonaire. De plus, les résultats de cette étude ont aussi permis de classer les nanophytoglycogènes quasi-neutre et anionique comme étant des vecteurs de médicaments potentiels. / The human lungs present many advantages as a drug delivery route, namely a high surface area (70-100 m2) for the adsorption of molecular species and particles, a thin epithelial barrier, an abundant underlying vasculature, and low acidity. Inhalation delivery is expected to be an ideal approach for the treatment of lung cancer and associated pulmonary infection (33% of cases) as it allows the site-specific physical delivery of chemotherapeutic. Nanoparticle carriers broaden the options for targeted drug delivery systems with advantages including high stability/long shelf life and high carrier capacity. In the alveoli, inhaled nanoparticles interact with lung (pulmonary) surfactant, a lipid/protein mixture that lines the alveolar air/fluid interface and serves as a primary barrier to uptake. The physical/chemical interaction of the nanoparticles with the surfactant determines their clearance, retention, and translocation. We propose to use novel phytoglycogen nanoparticles, extracted from non-GMO corn, for the pulmonary delivery of a dual action anticancer and antimicrobial peptide that is problematic to deliver orally or by injection. Nanophytoglycogen, composed of glucose molecules, is non-biopersistent, non-toxic and is GRAS (Generally Recognized as Safe) for oral ingestion. However, its safety for inhalation remains to be determined. Before evaluating the efficacy of nanophytoglycogen to serve as an organic nanocarrier for the aerosol delivery of peptide therapeutics, their impact on the biophysical properties and phase structure of lung surfactant must first be characterized. The objective of the research is to investigate the effect of nanophytoglycogens of different surface charge on the physicochemical properties of pulmonary surfactant model systems using Langmuir monolayers. More specifically, the effect of the nanoparticles on the surface activity, morphology, reversibility, and film thickness of pulmonary surfactant is studied. Isotherms (surface pressure vs. molecular area), BAM (Brewster Angle Microscopy) imaging, and ellipsometry at the air-water interface allow a surmise of the potential adverse effects of nanophytoglycogen on the lungs. Using these techniques, it was possible to study monolayers of phospholipids and proteins, representing the pulmonary surfactant. In the presence of anionic and quasi-neutral iv nanoparticles, the different monolayers didn’t undergo any disturbance. However, the results demonstrated that cationic nanoparticles bind to anionic phospholipids, which increases the thickness of the monolayer and thus the work required to complete a respiratory cycle. This study has demonstrated the importance of nanoparticle’s surface charge during their interaction with pulmonary surfactant. In addition, the results of this study also made it possible to classify the quasi-neutral and anionic nanophytoglycogens as being potential drug vectors.

Ce travail a pour objet d’améliorer les performances d’un réacteur photocatalytique tubulaire de traitement des COVs, en le garnissant avec des supports structurés et imprégnés de TiO2. Grâce à un montage adapté, l’efficacité du réacteur est suivie en mesurant le taux de conversion du méthanol, choisi comme polluant modèle. Différentes géométries de support catalytique ont été fabriquées par stéréolithographie. Parmi toutes les géométries testées, la structure alvéolaire, constituée de canaux verticaux pour le passage du fluide et de canaux horizontaux pour le passage de la lumière, permet une efficacité optimale du réacteur. La modélisation du réacteur, tenant compte de la distribution de la lumière dans le support, montre que le transfert de matière est limitant lorsque le diamètre des canaux est plus petit que 4 mm. En revanche, lorsque le diamètre des canaux est supérieur à 5 mm, le manque d'efficacité est dû à une diminution de l'absorption de la lumière incidente. / The aim of the work is to improve the efficiency of a photocatalytic tubular reactor for VOCs abatement, while loading it with structured catalytic supports impregnated of TiO2.Thanks to a photocatalytic set-up , the efficiency of the reactor is followed by measuring the conversion rate of a model pollutant: methanol. Different geometries of support have been made by stereolithography. Among all tested geometries, the alveolar structure, composed of vertical channels for light penetration, and horizontal channels for the circulation of the gas flow, leads to an optimal degradation of the pollutant. The modelling of the reactor, taking into account the light distribution, shows that the mass transfer is limiting when the diameter of the channels is smaller than 4 mm. On the other hand, when the diameter of the channels is bigger than 5 mm, the lack of efficiency is due to a reduction of the absorption of the incident light by the catalytic surface.