Submitted by Automação e Estatística (sst@bczm.ufrn.br) on 2018-04-11T20:06:38Z No. of bitstreams: 1 BrunoJacomeCavalcanti_TESE.pdf: 5397909 bytes, checksum: 5a245eec570a69adf8ca5d791aaddf70 (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2018-04-16T20:46:19Z (GMT) No. of bitstreams: 1 BrunoJacomeCavalcanti_TESE.pdf: 5397909 bytes, checksum: 5a245eec570a69adf8ca5d791aaddf70 (MD5) / Made available in DSpace on 2018-04-16T20:46:19Z (GMT). No. of bitstreams: 1 BrunoJacomeCavalcanti_TESE.pdf: 5397909 bytes, checksum: 5a245eec570a69adf8ca5d791aaddf70 (MD5) Previous issue date: 2017-10-20 / A perfeita funcionalidade dos sistemas de comunicações de 3ª. e 4ª. gerações requerem, entre outras coisas, do conhecimento dos valores numéricos da predição das perdas de propagação dos sinais propagantes nos ambientes urbano, suburbano e rural. Portanto, o estudo das condições de propagação em um ambiente qualquer sempre será uma preocupação dos engenheiros projetistas. A análise e desenvolvimento de modelos robustos de predição de perdas de propagação em redes de comunicações Long Term Evolution (LTE) e Long Term Evolution Advanced (LTE-A) usando técnicas de Inteligência Artificial são realizadas neste trabalho. Os procedimentos metodológicos empregados foram aplicados no melhoramento da predição dos modelos de perda de propagação empíricos SUI, ECC-33, Ericsson 9999, TR 36.942 e o modelo do Espaço Livre, aplicados em redes LTE e LTE-A nas frequências de 800 MHz, 1800 MHz e 2600 MHz, para ambientes suburbanos em cidades de porte médio do nordeste do Brasil. Assim, nesta tese propõem-se dois modelos de Redes Neurais Artificiais (RNA): (i) o modelo de rede neural com entradas baseadas em erro (RNBE), utilizando como principal alimentador da rede o erro entre dados medidos e simulados, e, (ii) o modelo de rede neural com entradas baseadas no terreno (RNBT). O desempenho desses modelos foram comparados com os modelos de propagação considerados no trabalho e também as versões otimizadas utilizando Algoritmos Genéticos (AG) e o Método dos Mínimos Quadrados (LMS). Também foram realizadas comparações com valores medidos, obtidos a partir de uma campanha de medição realizada na cidade de Natal, Estado do Rio Grande do Norte. Os resultados finais obtidos através de simulações e medições apresentaram boas concordâncias métricas, com destaque para a performance do modelo RNBE. A principal contribuição dessa tese é que, ao utilizar essas técnicas que fazem uso de maneira mais eficiente dos modelos de propagação empíricos, pode-se estimar sinais propagantes realistas, evitando erros no planejamento e implementações de redes sem fio LTE e LTE-A em áreas suburbanas. / The perfect functionality of the 3rd and 4th generation of wireless systems requires, among other parameters, knowledge of the numerical values of the prediction of loss of propagation of propagation signals in urban, suburban and rural environments. Therefore, the study of propagation conditions in any environment will always be a concern of design engineers. The analysis and development of robust propagation loss prediction models in Long Term Evolution (LTE) and Long Term Evolution Advanced (LTE-A) communications networks using Artificial Intelligence techniques is performed in this work. The methodologies used were applied to improve the prediction of loss of empirical propagation SUI, ECC-33, Ericsson 9999, TR 36.942 models and the Free Space model applied in LTE and LTE-A networks in the frequencies of 800 MHz, 1800 MHz and 2600 MHz, for suburban environments in mid-sized cities in northeastern Brazil. Thus, in these thesis two models of Artificial Neural Networks (RNA) are proposed: (i) the neural network model with inputs based on error (RNBE) using as main feeder of the network the error between measured and simulated data, and (ii) the neural network model with land-based inputs (RNBT). The performance of these models was compared with the models of propagation considered in the work and also the versions optimized using Genetic Algorithms (AG) and the Least Square Method (LMS). Comparisons were also made with measured values, obtained from a measurement campaign carried out in the city of Natal, state of Rio Grande do Norte. The final results obtained through simulations and measurements presented good metric concordances, with emphasis on the performance of the RNBE model. Thus, the main contribution of this thesis is that, by using these techniques that make more efficient use of empirical propagation models, we can estimate realistic propagation signals, avoiding errors in the planning and implementations of LTE and LTE- A wireless networks in suburban areas.

Submitted by Marlene Santos (marlene.bc.ufg@gmail.com) on 2016-08-29T19:18:54Z No. of bitstreams: 2 Dissertação - Diego Fernando Burgos Beltrán - 2015.pdf: 4368650 bytes, checksum: 0eb56ef14323cf94881fc293cfa9be70 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) / Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2016-08-30T11:24:57Z (GMT) No. of bitstreams: 2 Dissertação - Diego Fernando Burgos Beltrán - 2015.pdf: 4368650 bytes, checksum: 0eb56ef14323cf94881fc293cfa9be70 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) / Made available in DSpace on 2016-08-30T11:24:57Z (GMT). No. of bitstreams: 2 Dissertação - Diego Fernando Burgos Beltrán - 2015.pdf: 4368650 bytes, checksum: 0eb56ef14323cf94881fc293cfa9be70 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Previous issue date: 2015-07-06 / Outro / The continuous technological advances in the areas of electronics and programming made the signal processing techniques much easier to implement, allowing them to be incorporated in the communication systems, improving their performance. This work approaches the problem of estimating direction of arrival or angle of incidence (DOA) of electromagnetic wave fronts of a linear antenna array, and of beamforming of the array. Among the various techniques that exist in the literature, the Least Mean Squared algorithm (LMS) is a deterministic method that stands out for its simplicity, ease of implementation and the tendency to find local minima. On the other hand, the Genetic Algorithm (GA) is a heuristic method that ensures more comprehensive exploration possibilities avoiding the tendency of sticking to local minima, but offering greater difficulty of implementation, and higher computational complexity. The recently proposed Compact Genetic Algorithm (cGA) is a tool that shares all the virtues of GA, but without requiring the large computational cost that a GA entails. Since this method has not yet been used for controlling antenna arrays, this paper proposes to use it as the estimation of DOA and beamforming, in addition to enhance it with a number of modifications to make it more robust and more complete, though making it computationally heavier. This work presents simulations where the proposed adaptive receiver is evaluated under different scenarios of signal to noise ratio (SNR), number of interfering sources and convergence velocity. Moreover, moving users tracking situations are simulated, where the receiver's ability to adapt its radiation pattern is tested. All tests were done in the code division multiple access (CDMA) environment, where the only information available to the receiver are the sources spreading codes. To verify the operation of the cGA, its performance was compared with that of the LMS algorithm simulation under the same simulation conditions. The development of this thesis allowed to publish the articles named Adaptive Beamforming for Moving Targets Using Genetic Algorithms and a CDMA Reference Signal in the IEEE Colombian Conference on Communications and Computing COLCOM 2015, and Adaptive Beamforming for Moving Targets Using Genetic Algorithms in the IEEE Workshop on Engineering Applications WEA 2015 – International Congress on Engineering. The last one was accepted as an extended version to be publish in the magazine INGENIERÍA that belongs to the Distrital Francisco José de Caldas University in Bogotá, Colombia. / Os contínuos avanços tecnológicos nas áreas da eletrônica e da programação tornaram as técnicas de processamento de sinais muito mais fáceis de implementar, permitindo a incorporação delas nos sistemas de comunicação, melhorando a performance destes. Neste trabalho desenvolve-se o problema de estimação da direção de chegada ou ângulo de incidência (DOA) de frentes de ondas eletromagnéticas sobre um arranjo linear de antenas, além da conformação de feixe (beamforming) do arranjo. Dentre as diversas técnicas existentes na literatura, o algoritmo de Mínima Média Quadrática (LMS, do inglês Least Mean Squared) é um método determinístico que se destaca por sua simplicidade, facilidade de implementação e a tendência de encontrar mínimos locais como resposta. Por outro lado, o Algoritmo Genético (AG) é um método heurístico que garante uma exploração mais completa de possibilidades evitando a tendência de cair em mínimos locais, mas oferecendo uma maior dificuldade de implementação, além de maior complexidade computacional. Recentemente, foi proposto o Algoritmo Genético Compacto (AGC), que é uma ferramenta que compartilha todas as virtudes dos Algoritmos Genéticos, porém sem exigir o grande custo computacional que um AG implica. Como este método ainda não foi utilizado para o controle de arranjos de antenas, este trabalho propõe utilizá-lo na estimação da DOA e beamforming, além de agregar-lhe uma série de modificações a fim de torná-lo mais robusto e mais completo, apesar de computacionalmente mais pesado. Neste trabalho exibe-se simulações em que o receptor adaptativo proposto é avaliado sob diferentes situações de relação sinal ruído (SNR), quantidade de fontes interferentes e velocidade de convergência. Além disso, simulam-se situações de rastreamento de usuários em movimento, onde é posta à prova a capacidade do receptor adaptar seu diagrama de radiação. Todos os testes foram feitos no ambiente de multiplicidade de acesso via divisão por códigos (CDMA), onde a única informação disponível no receptor são os códigos de espalhamento das fontes. Para conferir o funcionamento do AGC, comparou-se seu desempenho com aquele do algoritmo LMS sob as mesmas condições de simulação. O desenvolvimento desta tese permitiu a publicação dos artigos Adaptive Beamforming for Moving Targets Using Genetic Algorithms and a CDMA Reference Signal no IEEE Colombian Conference on Communications and Computing COLCOM 2015 e Adaptive Beamforming for Moving Targets Using Genetic Algorithms no IEEE Workshop on Engineering Applications WEA 2015 – International Congress on Engineering, este ultimo foi aceito para ser publicado como uma versão estendida na revista INGENIERÍA da universidade Distrital Francisco José de Caldas de Bogotá, Colômbia.

The proliferation of modern wireless networks increases demand for high capacity and throughput in order to provide faster, more robust, efficient and broadband services to end users. Mobile WiMAX and LTE are examples of such networks in which for some cases they have exposed limited connectivity due to harsh environment. Relay stations are preferred to overcome problems of weak or no access for such network devices, that are placed in specific positions to maintain high quality of data transfer at low cost and provide the required connectivity anywhere anytime. These stations should be equipped with an antenna system capable of establishing communication between base station (backhaul link) and end users (access link). This thesis focuses on the design and development of a new antenna system that is suitable for a relay-based wireless network. Planar geometries of microstrip patch antennas are utilized. The antenna system comprises two antenna modules: a new design of a single antenna for access link and a new design of an antenna array for backhaul link realization. Both antenna specifications are compatible with the IEEE802.16j protocol standard. Hence, relay station should be capable of pointing its radiation pattern to the base station antenna, thus to achieve the desired radiation pattern of the relay station, a new beam-forming module is proposed, designed and developed to generate the proper radiation pattern. The beam-forming module incorporating digital phase shifters and attenuator chips is fabricated and tested. The optimization process using the Least Mean Square (LMS) algorithm is considered in this study to assign the proper phase and amplitude that is necessary to each radiation element excitation current, to produce the desired steered radiation pattern. A comprehensive study on the coupling effects for several relative positions between two new backhaul and access link antenna elements is performed. Two new antenna configurations for coupling reduction are tested and the simulated and measured results in terms of antenna radiation performances were compared and commented.

The proliferation of modern wireless networks increases demand for high capacity and throughput in order to provide faster, more robust, efficient and broadband services to end users. Mobile WiMAX and LTE are examples of such networks in which for some cases they have exposed limited connectivity due to harsh environment. Relay stations are preferred to overcome problems of weak or no access for such network devices, that are placed in specific positions to maintain high quality of data transfer at low cost and provide the required connectivity anywhere anytime. These stations should be equipped with an antenna system capable of establishing communication between base station (backhaul link) and end users (access link). This thesis focuses on the design and development of a new antenna system that is suitable for a relay-based wireless network. Planar geometries of microstrip patch antennas are utilized. The antenna system comprises two antenna modules: a new design of a single antenna for access link and a new design of an antenna array for backhaul link realization. Both antenna specifications are compatible with the IEEE802.16j protocol standard. Hence, relay station should be capable of pointing its radiation pattern to the base station antenna, thus to achieve the desired radiation pattern of the relay station, a new beam-forming module is proposed, designed and developed to generate the proper radiation pattern. The beam-forming module incorporating digital phase shifters and attenuator chips is fabricated and tested. The optimization process using the Least Mean Square (LMS) algorithm is considered in this study to assign the proper phase and amplitude that is necessary to each radiation element excitation current, to produce the desired steered radiation pattern. A comprehensive study on the coupling effects for several relative positions between two new backhaul and access link antenna elements is performed. Two new antenna configurations for coupling reduction are tested and the simulated and measured results in terms of antenna radiation performances were compared and commented.

This thesis focuses on detection algorithms of radar targets, namely on group of techniques for removing of disturbing reflections from static objects - clutter and for suppression of distortion products caused by the phase noise of the transmitter and receiver. Methods for distortion suppression in received signal are designed for implementation in the developed active multistatic radar, which operates in the code division multiplex of several transmitters on single frequency. The aim of the doctoral thesis is to design, implement in tool for technical computing MATLAB and analyze the effectiveness and computational complexity of these techniques on simulated and real data.

Tato práce je psaná v angličtině a je zaměřená na problematiku ekvalizace v digitálních komunikačních systémech. Teoretická část zahrnuje stručné pozorování různých způsobů návrhu ekvalizérů. Praktická část se zabývá implementací nejčastěji používaných ekvalizérů a s jejich adaptačními algoritmy. Cílem praktické části je porovnat jejich charakteristiky a odhalit činitele, které ovlivňují kvalitu ekvalizace. V rámci problematiky ekvalizace jsou prozkoumány tři typy ekvalizérů. Lineární ekvalizér, ekvalizér se zpětnou vazbou a ML (Maximum likelihood) ekvalizér. Každý ekvalizér byl testován na modelu, který simuloval reálnou přenosovou soustavu s komplexním zkreslením, která je složena z útlumu, mezisymbolové interference a aditivního šumu. Na základě implenentace byli určeny charakteristiky ekvalizérů a stanoveno že optimální výkon má ML ekvalizér. Adaptační algoritmy hrají významnou roli ve výkonnosti všech zmíněných ekvalizérů. V práci je nastudována skupina stochastických algoritmů jako algoritmus nejmenších čtverců(LMS), Normalizovaný LMS, Variable step-size LMS a algoritmus RLS jako zástupce deterministického přístupu. Bylo zjištěno, že RLS konverguje mnohem rychleji, než algoritmy založené na LMS. Byly nastudovány činitele, které ovlivnili výkon popisovaných algoritmů. Jedním z důležitých činitelů, který ovlivňuje rychlost konvergence a stabilitu algoritmů LMS je parametr velikosti kroku. Dalším velmi důležitým faktorem je výběr trénovací sekvence. Bylo zjištěno, že velkou nevýhodou algoritmů založených na LMS v porovnání s RLS algoritmy je, že kvalita ekvalizace je velmi závislá na spektrální výkonové hustotě a a trénovací sekvenci.

Radio astronomy is the science of observing the heavens at radio frequencies, from a few kHz to approximately 300 GHz. In recent years, radio astronomy has faced a growing interference problem as radio frequency (RF) bandwidth has become an increasingly scarce commodity. A programmable real-time DSP least-mean-square interference canceller was developed and demonstrated as a successful method of excising satellite down-link signals from both an experimental platform at BYU, and the Green Bank Telescope at the National Radio Astronomy Observatory in West Virginia. A performance analysis of this cancellation system in the radio astronomy radio frequency interference (RFI) mitigation regime constitutes the main contribution of this thesis. The real-time BYU test platform consists of small radio telescopes, low noise RF receivers, and a state-of-the-art DSP platform. This programmable real-time radio astronomy RFI mitigation tool is the first of its kind. Basic tools needed for radio astronomy observations and the analysis and implementation of interference mitigation algorithms were also implemented in the DSP platform, including a power spectral density estimator, a beamformer, and an array signal correlator.

La quinta generación de redes móviles (5G) se encuentra a la vuelta de la esquina. Se espera provea de beneficios extraordinarios a la población y que resuelva la mayoría de los problemas de las redes 4G actuales. El éxito de 5G, cuya primera fase de estandarización ha sido completada, depende de tres pilares: comunicaciones tipo-máquina masivas, banda ancha móvil mejorada y comunicaciones ultra fiables y de baja latencia (mMTC, eMBB y URLLC, respectivamente). En esta tesis nos enfocamos en el primer pilar de 5G, mMTC, pero también proveemos una solución para lograr eMBB en escenarios de distribución masiva de contenidos. Específicamente, las principales contribuciones son en las áreas de: 1) soporte eficiente de mMTC en redes celulares; 2) acceso aleatorio para el reporte de eventos en redes inalámbricas de sensores (WSNs); y 3) cooperación para la distribución masiva de contenidos en redes celulares. En el apartado de mMTC en redes celulares, esta tesis provee un análisis profundo del desempeño del procedimiento de acceso aleatorio, que es la forma mediante la cual los dispositivos móviles acceden a la red. Estos análisis fueron inicialmente llevados a cabo por simulaciones y, posteriormente, por medio de un modelo analítico. Ambos modelos fueron desarrollados específicamente para este propósito e incluyen uno de los esquemas de control de acceso más prometedores: access class barring (ACB). Nuestro modelo es uno de los más precisos que se pueden encontrar en la literatura y el único que incorpora el esquema de ACB. Los resultados obtenidos por medio de este modelo y por simulación son claros: los accesos altamente sincronizados que ocurren en aplicaciones de mMTC pueden causar congestión severa en el canal de acceso. Por otro lado, también son claros en que esta congestión se puede prevenir con una adecuada configuración del ACB. Sin embargo, los parámetros de configuración del ACB deben ser continuamente adaptados a la intensidad de accesos para poder obtener un desempeño óptimo. En la tesis se propone una solución práctica a este problema en la forma de un esquema de configuración automática para el ACB; lo llamamos ACBC. Los resultados muestran que nuestro esquema puede lograr un desempeño muy cercano al óptimo sin importar la intensidad de los accesos. Asimismo, puede ser directamente implementado en redes celulares para soportar el tráfico mMTC, ya que ha sido diseñado teniendo en cuenta los estándares del 3GPP. Además de los análisis descritos anteriormente para redes celulares, se realiza un análisis general para aplicaciones de contadores inteligentes. Es decir, estudiamos un escenario de mMTC desde la perspectiva de las WSNs. Específicamente, desarrollamos un modelo híbrido para el análisis de desempeño y la optimización de protocolos de WSNs de acceso aleatorio y basados en cluster. Los resultados muestran la utilidad de escuchar el medio inalámbrico para minimizar el número de transmisiones y también de modificar las probabilidades de transmisión después de una colisión. En lo que respecta a eMBB, nos enfocamos en un escenario de distribución masiva de contenidos, en el que un mismo contenido es enviado de forma simultánea a un gran número de usuarios móviles. Este escenario es problemático, ya que las estaciones base de la red celular no cuentan con mecanismos eficientes de multicast o broadcast. Por lo tanto, la solución que se adopta comúnmente es la de replicar e contenido para cada uno de los usuarios que lo soliciten; está claro que esto es altamente ineficiente. Para resolver este problema, proponemos el uso de esquemas de network coding y de arquitecturas cooperativas llamadas nubes móviles. En concreto, desarrollamos un protocolo para la distribución masiva de contenidos, junto con un modelo analítico para su optimización. Los resultados demuestran que el modelo propuesto es simple y preciso, y que el protocolo puede reducir el con / La cinquena generació de xarxes mòbils (5G) es troba molt a la vora. S'espera que proveïsca de beneficis extraordinaris a la població i que resolga la majoria dels problemes de les xarxes 4G actuals. L'èxit de 5G, per a la qual ja ha sigut completada la primera fase del qual d'estandardització, depén de tres pilars: comunicacions tipus-màquina massives, banda ampla mòbil millorada, i comunicacions ultra fiables i de baixa latència (mMTC, eMBB i URLLC, respectivament, per les seues sigles en anglés). En aquesta tesi ens enfoquem en el primer pilar de 5G, mMTC, però també proveïm una solució per a aconseguir eMBB en escenaris de distribució massiva de continguts. Específicament, les principals contribucions són en les àrees de: 1) suport eficient de mMTC en xarxes cel·lulars; 2) accés aleatori per al report d'esdeveniments en xarxes sense fils de sensors (WSNs); i 3) cooperació per a la distribució massiva de continguts en xarxes cel·lulars. En l'apartat de mMTC en xarxes cel·lulars, aquesta tesi realitza una anàlisi profunda de l'acompliment del procediment d'accés aleatori, que és la forma mitjançant la qual els dispositius mòbils accedeixen a la xarxa. Aquestes anàlisis van ser inicialment dutes per mitjà de simulacions i, posteriorment, per mitjà d'un model analític. Els models van ser desenvolupats específicament per a aquest propòsit i inclouen un dels esquemes de control d'accés més prometedors: el access class barring (ACB). El nostre model és un dels més precisos que es poden trobar i l'únic que incorpora l'esquema d'ACB. Els resultats obtinguts per mitjà d'aquest model i per simulació són clars: els accessos altament sincronitzats que ocorren en aplicacions de mMTC poden causar congestió severa en el canal d'accés. D'altra banda, també són clars en què aquesta congestió es pot previndre amb una adequada configuració de l'ACB. No obstant això, els paràmetres de configuració de l'ACB han de ser contínuament adaptats a la intensitat d'accessos per a poder obtindre unes prestacions òptimes. En la tesi es proposa una solució pràctica a aquest problema en la forma d'un esquema de configuració automàtica per a l'ACB; l'anomenem ACBC. Els resultats mostren que el nostre esquema pot aconseguir un acompliment molt proper a l'òptim sense importar la intensitat dels accessos. Així mateix, pot ser directament implementat en xarxes cel·lulars per a suportar el trànsit mMTC, ja que ha sigut dissenyat tenint en compte els estàndards del 3GPP. A més de les anàlisis descrites anteriorment per a xarxes cel·lulars, es realitza una anàlisi general per a aplicacions de comptadors intel·ligents. És a dir, estudiem un escenari de mMTC des de la perspectiva de les WSNs. Específicament, desenvolupem un model híbrid per a l'anàlisi de prestacions i l'optimització de protocols de WSNs d'accés aleatori i basats en clúster. Els resultats mostren la utilitat d'escoltar el mitjà sense fil per a minimitzar el nombre de transmissions i també de modificar les probabilitats de transmissió després d'una col·lisió. Pel que fa a eMBB, ens enfoquem en un escenari de distribució massiva de continguts, en el qual un mateix contingut és enviat de forma simultània a un gran nombre d'usuaris mòbils. Aquest escenari és problemàtic, ja que les estacions base de la xarxa cel·lular no compten amb mecanismes eficients de multicast o broadcast. Per tant, la solució que s'adopta comunament és la de replicar el contingut per a cadascun dels usuaris que ho sol·liciten; és clar que això és altament ineficient. Per a resoldre aquest problema, proposem l'ús d'esquemes de network coding i d'arquitectures cooperatives anomenades núvols mòbils. En concret, desenvolupem un protocol per a realitzar la distribució massiva de continguts de forma eficient, juntament amb un model analític per a la seua optimització. Els resultats demostren que el model proposat és simple i precís / The 5th generation (5G) of mobile networks is just around the corner. It is expected to bring extraordinary benefits to the population and to solve the majority of the problems of current 4th generation (4G) systems. The success of 5G, whose first phase of standardization has concluded, relies in three pillars that correspond to its main use cases: massive machine-type communication (mMTC), enhanced mobile broadband (eMBB), and ultra-reliable low latency communication (URLLC). This thesis mainly focuses on the first pillar of 5G: mMTC, but also provides a solution for the eMBB in massive content delivery scenarios. Specifically, its main contributions are in the areas of: 1) efficient support of mMTC in cellular networks; 2) random access (RA) event-reporting in wireless sensor networks (WSNs); and 3) cooperative massive content delivery in cellular networks. Regarding mMTC in cellular networks, this thesis provides a thorough performance analysis of the RA procedure (RAP), used by the mobile devices to switch from idle to connected mode. These analyses were first conducted by simulation and then by an analytical model; both of these were developed with this specific purpose and include one of the most promising access control schemes: the access class barring (ACB). To the best of our knowledge, this is one of the most accurate analytical models reported in the literature and the only one that incorporates the ACB scheme. Our results clearly show that the highly-synchronized accesses that occur in mMTC applications can lead to severe congestion. On the other hand, it is also clear that congestion can be prevented with an adequate configuration of the ACB scheme. However, the configuration parameters of the ACB scheme must be continuously adapted to the intensity of access attempts if an optimal performance is to be obtained. We developed a practical solution to this problem in the form of a scheme to automatically configure the ACB; we call it access class barring configuration (ACBC) scheme. The results show that our ACBC scheme leads to a near-optimal performance regardless of the intensity of access attempts. Furthermore, it can be directly implemented in 3rd Generation Partnership Project (3GPP) cellular systems to efficiently handle mMTC because it has been designed to comply with the 3GPP standards. In addition to the analyses described above for cellular networks, a general analysis for smart metering applications is performed. That is, we study an mMTC scenario from the perspective of event detection and reporting WSNs. Specifically, we provide a hybrid model for the performance analysis and optimization of cluster-based RA WSN protocols. Results showcase the utility of overhearing to minimize the number of packet transmissions, but also of the adaptation of transmission parameters after a collision occurs. Building on this, we are able to provide some guidelines that can drastically increase the performance of a wide range of RA protocols and systems in event reporting applications. Regarding eMBB, we focus on a massive content delivery scenario in which the exact same content is transmitted to a large number of mobile users simultaneously. Such a scenario may arise, for example, with video streaming services that offer a particularly popular content. This is a problematic scenario because cellular base stations have no efficient multicast or broadcast mechanisms. Hence, the traditional solution is to replicate the content for each requesting user, which is highly inefficient. To solve this problem, we propose the use of network coding (NC) schemes in combination with cooperative architectures named mobile clouds (MCs). Specifically, we develop a protocol for efficient massive content delivery, along with the analytical model for its optimization. Results show the proposed model is simple and accurate, and the protocol can lead to energy savings of up to 37 percent when compared to the traditional approach. / Leyva Mayorga, I. (2018). On reliable and energy efficient massive wireless communications: the road to 5G [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/115484 / TESIS