Neste trabalho apresentamos um esquema numérico para a simulação computacional de escoamentos bifásicos, água-óleo, em reservatórios de petróleo. O modelo matemático consiste em um sistema de equações diferenciais parciais não-linear nas incógnitas velocidade, pressão e saturação. Uma quebra de operadores a dois níveis possibilita uma maior eficiência ao método permitindo que a velocidade, fornecida pelo problema de velocidade-pressão, seja atualizada somente para determinados intervalos de tempo associados ao problema de transporte advectivo-difusivo em termos da saturação. O método dos volumes finitos é empregado na resolução numérica do problema de velocidade-pressão e do transporte de massa por advecção e difusão. Na solução do problema de transporte de massa utilizamos limitadores de fluxo na aproximação dos termos advectivos e diferenças centradas para os termos difusivos. O nosso simulador foi validado a partir de confrontações dos seus resultados com as soluções teóricas conhecidas para os problemas unidimensionais, equações de Burgers e de Buckley-Leverett, e com outros resultados numéricos em se tratando do escoamento bifásico água-óleo bidimensional em meios porosos heterogêneos. / A new numerical method is proposed for the solution of two-phase flow problem in petroleum reservoirs. The two-phase (water and oil) flow problem is governed by a pressure-velocity equation coupled to a saturation equation. For computational eficiency an operator spliting technique is used; distinct time steps can be used for the computation of transport and pressure-velocity problems. The finite volume method is used in the numerical solution of the velocity-pressure and mass transport problems. A flux limiter is used for the numerical discretization of the advective terms while centered schemes are employed for the diffusion terms in the mass transport problem. In the validation of our numerical method we compared numerical and theoretical solutions for one dimensional problems, Burgers and Buckley-Leverett equations, and compared our numerical results to others, in the case of oil-water flows in two dimensions for an heterogeneous porous media.

This graduation theses shows some of possible versions of outdoor switchgears with very high voltage, especially on the level 123 kV both concerning own complement of classic outdoor switchgears with devices as are overvoltages limiter, disconnecting switchgears, circuit breakers, etc., and compact connections. In the introduction of my theses there are explained basic ideas and theories of switchgears and described main devices and equipments which create classic (from equipment setting point of view) outdoor switchgears of very high voltage. Subsequently it describes possible ways of linking-up of these devices in the complex of switchgears themselves according to possible dispositions arranged and busbars systems. The same focus is dedicated to new, non-classic (non-standard solution in terms of devices solution), compact solving of outdoor very high voltage modules either by air isolated or by means of enclosed technology with gas SF6 which represent innovative solving first of all from reduction of built up area point of view which is very important from economic point of view especially during constructions of new switchgears. In the end of my theses there are mentioned also brief evaluations of producers and economics for development and operation of individual technologies. I used for my work materials of companies CEZ, a. s., Siemens, a. s. and Abb, a.s.

This thesis deals with basic methods of root mean square and peak value measurement of a digital acoustic signal, algotithms to measure audio programme loudness and true-peak audio level according to recommendation ITU-R BS.1770-1 and digital systems for control of signal dynamic range. It shows achieved results of root mean square and peak value measurement and results of implementation of dynamic processor with general piecewise linear non-decreasing static curve and algorithms according to recommendation ITU-R BS.1770-1.

This thesis is an engineering design of an intelligent fast-charger for lead-acid accumulators. It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger portable, lightweight and small. The Intelligent fast-charger for lead-acid accumulators charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 10A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. There are three LEDs placed on the front side of the charger reflecting status of the device. The device comprises safety protection for the charger, supply network and battery.

Thermonuclear fusion may become an attractive future power source. The most promising of all fusion machine concepts is the tokamak. Despite decades of active research, still huge tasks remain before a fusion power plant can go online. One of these important tasks deals with the interaction between the fusion plasma and the reactor wall. This work focuses on how eroded wall materials of different origin and mass are transported in a tokamak device. Element transport can be examined by injection of certain species of unique and predetermined origin, so called tracers. Tracer experiments were conducted at the TEXTOR tokamak before its final shutdown. This offered an unique opportunity for studies of the wall and other internal components: For the first time it was possible to completely dismantle such a machine and analyse every single part of reactor wall, obtaining a detailed pattern of material migration. Main focus of this work is on the high-Z metals tungsten and molybdenum, which were introduced by WF6 and MoF6 injection into the TEXTOR tokamak in several material migration experiments. It is shown that Mo and W migrate in a similar way around the tokamak and that Mo can be used as tracer for W transport. It is further shown how other materials - medium-Z (Ni), low-Z (N-15 and F), fuel species (D) - migrate and get deposited. Finally, the outcome of dust sampling studies is discussed. It is shown that dust appearance and composition depends on origin, formation conditions and that it can originate even from remote systems like the NBI system. Furthermore, metal splashes and droplets have been found, some of them clearly indicating boiling processes. / <p>QC 20151203</p>

L’objectif de ce travail de thèse est de proposer la Méthodes des éléments finis de Galerkin discontinus (DGFEM) à la discrétisation des équations compressibles de Navier-Stokes. Plusieurs challenges font l’objet de ce travail. Le premier aspect a consisté à montrer l’ordre de convergence optimal de la méthode DGFEM en utilisant les polynômes d’interpolation d’ordre élevé. Le deuxième aspect concerne l’implémentation de méthodes de ‘‘shock-catpuring’’ comme les limiteurs de pentes et les méthodes de viscosité artificielle pour supprimer les oscillations numériques engendrées par l’ordre élevé (lorsque des polynômes d’interpolation de degré p>0 sont utilisés) dans les écoulements transsoniques et supersoniques. Ensuite nous avons implémenté des estimateurs d’erreur a posteriori et des procédures d ’adaptation de maillages qui permettent d’augmenter la précision de la solution et la vitesse de convergence afin d’obtenir un gain de temps considérable. Finalement, nous avons montré la capacité de la méthode DG à donner des résultats corrects à faibles nombres de Mach. Lorsque le nombre de Mach est petit pour les écoulements compressibles à la limite de l’incompressible, la solution souffre généralement de convergence et de précision. Pour pallier ce problème généralement on procède au préconditionnement qui modifie les équations d’Euler. Dans notre cas, les équations ne sont pas modifiées. Dans ce travail, nous montrons la précision et la robustesse de méthode DG proposée avec un schéma en temps implicite de second ordre et des conditions de bords adéquats. / The aim of this thesis is to deal with compressible Navier-Stokes flows discretized by Discontinuous Galerkin Finite Elements Methods. Several aspects has been considered. One is to show the optimal convergence of the DGFEM method when using high order polynomial. Second is to design shock-capturing methods such as slope limiters and artificial viscosity to suppress numerical oscillation occurring when p>0 schemes are used. Third aspect is to design an a posteriori error estimator for adaptive mesh refinement in order to optimize the mesh in the computational domain. And finally, we want to show the accuracy and the robustness of the DG method implemented when we reach very low mach numbers. Usually when simulating compressible flows at very low mach numbers at the limit of incompressible flows, there occurs many kind of problems such as accuracy and convergence of the solution. To be able to run low Mach number problems, there exists solution like preconditioning. This method usually modifies the Euler. Here the Euler equations are not modified and with a robust time scheme and good boundary conditions imposed one can have efficient and accurate results.

科学研究費補助金 研究種目:基盤研究(A)(2) 課題番号:14205040 研究代表者:早川 直樹 研究期間:2002-2003年度

This master’s thesis describes various principles of measurement of electromagnetic waves in a free space and on a line. Used sensors and their real parameters are given for every method. The analysis of protections of high-frequency inputs of measuring instruments is done here and the most suitable method and protections of input for realization are chosen. The analysis of design of secondary protection of high-frequency input is done in this project. The protection of input is realized and measured. The suitable method of measurement is chosen as well as the sensor for measurement of power. The block diagram and circuit diagram of the meter of power are designed. According to designed conception the measuring instrument for measurement of power is realized and its single qualities are measured during the realization. In the final part its precision is measured and the evaluation of results is done.

Master’s thesis deals with design of laboratory supply with precise voltage and current measuring. At the beginning it presents properties, advantages and disadvantages of linear and switching supplies, based on these facts it chooses a linear type of regulator. The design continues with detailed description of power and control analog and digital circuits. The thesis includes description of taking control over the supply from the front panel or through computer. The last part is devoted to measurement results and to presentation of some static and dynamic parameters of the designed supply.