Utilizando cristais de KCl:SH- dopados com centros F2+ na ausência de centros F e F2, permitiu-nos estudar o Dicroísmo Circular Magnético (DCM) em absorção das transições 1s ?g(493?m) e 1s ?g - 2py?w (509 ?m) como função do campo magnético de 0 < H < 48 KG e temperatura entre 1.5 < T < 77K. A transição 1s ?g, 2p? (1.4 ?m) em absorção não apresentou DCM dentro do limite de detecção de nosso equipamento (1.2 X 10-4); o mesmo aconteceu com a transição (2p?w- 1s ?g) em emissão (1.2 X 10-4). Irradiando com luz polarizada na banda ?, os centros F2+ se .reorienta ao longo da direção [110] em até 1.5 K, apresentando uma forte birrefringência. Medidas em absorção com centros F2+ alinhados em várias geometrias, permitiu estudar a contribuição ao DCM de cada orientação do defeito. Apresentamos um modelo teórico em bom acordo com os resultados experimentais. Utilizando uma técnica de Detecção óptica de EPR, determinamos o fator de Landé para o estado fundamental (g =1.965 ± 0.007) e o tempo de relaxação spin-rede do estado fundamental a H = 3.2 KG, que é típico do processo direto T1-1 = 4.3 X 10-2cotgh(g?H/2kT). / Using KCl:SH- doped with F2+ centers without F and F2, we studied the Magnetic Circular Dichroism (MCD), in absorption of yhe transition 1s ?g(493?m) and 1s ?g - 2py?w (509 ?m) as a function of the magnetic field 0 < H < 48 KG and temperature 1.5 < T < 77K. The transition 1s ?g, 2p? (1.4 ?m) does not present any MCD within the limit of detection of our equipament (1.2 X 10-4); No dichroism has been observed in emission in the 2p?w- 1s ?g transition (1.2 X 10-4). F2+ centers reorient along the [110] direction down to 1.5 K by polarized light excitation in the ? bands and present a strong birefringence. Measurements in absorption with aligned F2+ in various geometry allows as to determine the contribution of each orientation to the DCM. A theorical model is presented in good agrement with the experimental results. The optical detection of the EPR in X-band give the Landé factor af the graund state is g =1.965 ± 0.007) and the spin-lattice relaxation measured at H = 3.2 KG is typical of a direct process T1-1 = 4.3 X 10-2cotgh(g?H/2kT).

Cílem této práce bylo studium Heuslrových sloučenin pomocí optických a magneto-optických (MO) metod. V případě první sloučeniny, Co2FeGa0.5Ge0.5, jsme studovali výskyt strukturálního disorderu za pomoci spektroskopické elipsometrie, MO spektroskopie a MO Kerrovy magnetome- trie. Experimentální výsledky jsme poté porovnali s teoretickými modely. Doplnili jsme také výsledky našich spolupracovník·, a to včetně X-ray difrakce, atomic-force mikroskopie a ab initio výpočt·, abych potvrdili naši interpretaci naměřených výsledk·. Bylo zjištěno, že strukturální disorder je vskutku pozorovatelný pomocí metod, kterých jsme využili. Jeho výskyt se projevil změnou elektronové struktury vzork·. V případě druhé sloučeniny, Fe2MnGa, jsme vyšetřovali vliv obsahu Fe složky na optické a MO vlastnosti tohoto materiálu. Zjistili jsme, že atomy Fe ovlivňují koncentraci volných elektron·, čímž dodávají sloučenině kovový charakter (v porovnání s Ni2MnGa). Zároveň zvyšují optickou a MO odezvu v blízké infra-červené oblasti spektra. Dále bylo zjištěno, že vzorek s nejvyšším obsahem Fe má nulovou magnetizaci. 1

A computer simulation is used to examine the effects that various control methods have on the performance of semiactive dampers in controlling the dynamics of a single suspension (quarter car) model. The level of dynamic control of this model has a direct bearing on the ride comfort and vehicle handling, when the single suspension is interpreted as a partial model of a vehicle. The dynamic results obtained when using two alternative semiactive control methods are compared to the results obtained when using the more conventional control methods of passive damping, Skyhook control, and Hybrid control. The conventional control methods results confirm that the semiactive damper possesses a number of benefits when compared to passive damping. In addition, the alternative control methods, which are Displacement Skyhook and Displacement Hybrid, do not show benefits that are superior to passive damping or the conventional semiactive control methods. In support of the conclusions of this report, sufficient detail of the mathematical and numerical model is provided in the event that one should wish to recreate the results presented here. Next, the simulation results of each of the five control methods are presented individually. Several of the responses used in the results chapters are the transmissibility plots for the sprung and unsprung body displacement, the frequency spectrum of acceleration, and the frequency spectrum of the rattle space. In addition, the system response to a step input is calculated and, lastly, time traces are calculated, one at a time, for system excitations at the sprung and unsprung mass natural frequencies. The key dynamic measures studied are settling times, displacements, accelerations, and jerks. The responses just listed are then used in a comparison study between each of the presented control methods. / Master of Science

Magneto-sensitive elastomers (MSEs) establish a special class of smart materials, which are able to change their shape and mechanical behavior under external magnetic field. Nowadays, MSEs are one of the most perspective smart materials, since they can be used for design of functionally integrated lightweight structures in sensors, robotics, actuators and damper applications. MSEs typically consist of micron-sized magnetizable particles (e.g. carbonyl iron) dispersed within a non-magnetic elastomeric matrix. The spatial distribution of magnetic particles in MSEs can be either isotropic or anisotropic, depending on whether they have been aligned by an applied magnetic field before the cross-linking of the polymer. Depending on the magnetic properties of the particles, their shape, size and spatial distribution, the MSEs can exhibit different mechanical behavior. Most experimental studies show that MSEs with isotropic distribution of magnetic particles demonstrate a uniaxial expansion along the magnetic field. On the other side, it was shown experimentally that MSEs with anisotropic particle distributions demonstrate a uniaxial contraction along the magnetic field. Also, the experimental works show that the shear moduli of MSEs increase with increasing strength of the magnetic field and depend on the magnetic properties, volume fraction and spatial distribution of particles. Different analytical approaches were used in theoretical studies of the mechanical behavior of MSEs. They can be roughly classified as phenomenological, continuum-mechanics and microscopic approaches. In the phenomenological approaches, the expansion into a series of the shear modulus as a function of the strength of the magnetic field has been proposed, the coefficients of the expansion being considered as phenomenological fitting parameters. In the continuum-mechanics approach, an MSE is considered as continuous magnetic media. It allows us to determine the shape and the change in volume of a spherical MSE sample, placed in a uniform magnetic field. However, this approach is restricted to homogeneous particle distributions. The microscopic approach has a clear advantage, while a discrete particle distribution and pair-wise interactions between induced magnetic dipoles can be considered explicitly. The aim of the present work is to develop a microscopic theory, which properly describes the mechanical behavior of MSEs in the external magnetic field. The theory takes a microscopic structure, finite shape of the samples and magneto-mechanical coupling between particle positions and sample deformation explicitly into account.

Title: Magnetic nanostructures for recording and optical sensors Author: Eva Lišková Department: Institute of Physics, Charles University Supervisor: Prof. Ing. Štefan Višňovský, DrSc. Abstract: Magneto-optical (MO) spectra of multilayered structures with enhanced MO effect were studied using the polar and longitudinal Kerr spectroscopy with oblique angle of light incidence in the photon energy range 1.2 eV to 5 eV. The samples with Fabry- Perot cavity like architecture, were modeled using Yeh matrix formalism. Two sets of samples, with composition FeF2/Fe/FeF2 and AlN/Fe/AlN, were prepared by molecular beam epitaxy and sputtering. The relations were studied between the position of the enhanced peak in the MO spectra and the structure. Second part of this work was devoted to the Pt/Co/Pt structures and the influence of the ion implantation on MO spectra and structural composition. The studied multilayer structures present interest for MO sensor and memory applications. Keywords: Magneto-optical Kerr effect, Magneto-optical sensor, Fabry-Perot resonator, Ion implantation

Magneto-sensitive elastomers (MSEs) establish a special class of smart materials, which are able to change their shape and mechanical behavior under external magnetic field. Nowadays, MSEs are one of the most perspective smart materials, since they can be used for design of functionally integrated lightweight structures in sensors, robotics, actuators and damper applications. MSEs typically consist of micron-sized magnetizable particles (e.g. carbonyl iron) dispersed within a non-magnetic elastomeric matrix. The spatial distribution of magnetic particles in MSEs can be either isotropic or anisotropic, depending on whether they have been aligned by an applied magnetic field before the cross-linking of the polymer. Depending on the magnetic properties of the particles, their shape, size and spatial distribution, the MSEs can exhibit different mechanical behavior. Most experimental studies show that MSEs with isotropic distribution of magnetic particles demonstrate a uniaxial expansion along the magnetic field. On the other side, it was shown experimentally that MSEs with anisotropic particle distributions demonstrate a uniaxial contraction along the magnetic field. Also, the experimental works show that the shear moduli of MSEs increase with increasing strength of the magnetic field and depend on the magnetic properties, volume fraction and spatial distribution of particles. Different analytical approaches were used in theoretical studies of the mechanical behavior of MSEs. They can be roughly classified as phenomenological, continuum-mechanics and microscopic approaches. In the phenomenological approaches, the expansion into a series of the shear modulus as a function of the strength of the magnetic field has been proposed, the coefficients of the expansion being considered as phenomenological fitting parameters. In the continuum-mechanics approach, an MSE is considered as continuous magnetic media. It allows us to determine the shape and the change in volume of a spherical MSE sample, placed in a uniform magnetic field. However, this approach is restricted to homogeneous particle distributions. The microscopic approach has a clear advantage, while a discrete particle distribution and pair-wise interactions between induced magnetic dipoles can be considered explicitly. The aim of the present work is to develop a microscopic theory, which properly describes the mechanical behavior of MSEs in the external magnetic field. The theory takes a microscopic structure, finite shape of the samples and magneto-mechanical coupling between particle positions and sample deformation explicitly into account.

No description available.

No description available.

No description available.

Neste trabalho mostrou-se a viabilidade técnica da construção de um sistema totalmente novo para medir altas tensões e correntes em linhas classe 15 kV, cuja filosofia fundamenta-se no acoplamento de dois sistemas de medidas, um convencional e outro eletro-óptico. O sistema convencional consiste em divisores de tensão e anéis captores e o eletro-óptico, em LEDs, resistores, fibras ópticas e receptores. Este sistema foi totalmente testado em laboratório e apresenta como principais características baixo custo, facilidade de instalação e versatilidade. Também neste trabalho foram desenvolvidos dois programas computacionais para a aquisição de dados através de placas GPIB e A/D. Estes programas também permitem processar os dados, fornecendo relatórios sobre tensões, correntes, potências e ângulo de potência. / In this work, the technical feasibility of the development of a novel system measuring of high voltages and currents in 15 kV distribution lines was presented. The system is basically the combination of two other systems, one conventional and other electro-optical. The conventional subsystem is based on voltage dividers and magnetic rings while the electro-optical subsystem uses LEDs, resistors, optical-fibers and photodetectors. The system was completely tested in laboratory and its main characteristics are low price, easy of installation and flexibility. Two softwares for data acquisition by GPIB and A/D boards were also developed. They can provide reports on voltages, currents, power and phase-power.