The attention for materials displaying high magnetocaloric effect (MCE) has grown during the past 30 years. One of the most important properties of MCE is the adiabatic temperature change ( ). The main aim of this work was to develop a method to measure the temperature change ( ) for magnetocaloric materials in a changing magnetic field.  A technique was developed where maximum reached  for Gadolinium was 1.19 K in a changing magnetic field of 1.3 T, however, this is lower value in comparison with previous studies (3.3 K in a changing magnetic field of 1 T, Bjørk, et al., 2010) which makes the developed method not sufficient enough to measure . Furthermore, finding novel materials displaying high MCE is of great interest. MnFePSiB alloys display promising MCE properties but processing method is expensive and time consuming. Therefore, a MnFePSiB compound was simply remelted several times and heat treated to enhance its properties. The MnFePSiB alloy was remelted 1, 2 and 3 times after initial casting. Melting the material 3 times resulted improvement in both the magnetic and magnetocaloric properties due to enhanced homogeneity. The material melted 3 times was further heat treated to improve its magnetic magnetocaloric properties. Heat treating the material for 5 hours at 1373K improved the magnetic entropy change more than 10 times compared to the as cast sample,  was moved closer to room temperature and maximum  of 0.71 K was obtained.

Les composés intermétalliques à base de terres rares et de métaux de transition présentent des propriétés magnétiques intéressantes pour les applications technologiques (aimants permanents, enregistrement magnétique à haute densité, réfrigération magnétique…).Ce travail est dédié à l'étude des propriétés structurales, magnétiques et magnétocaloriques des composés Pr2Fe17 dérivant de la structure Th2Zn17. Les propriétés magnétiques intrinsèques recherchées pour des propriétés performantes de ces composés sont améliorées sous l'effet de la substitution (fer par aluminium et praséodyme par dysprosium) et/ou l'insertion d'un élément léger (carbone). Les nanomatériaux intermétalliques sont élaborés par broyage à haute énergie suivi de recuit, ce qui pourrait conduire à des phases hors équilibre thermodynamique. L'homogénéité des alliages a été systématiquement analysée par diffraction des rayons X suivi de l'affinement Rietveld et par microscopie électronique en transmission. Les résultats ont montré qu'on peut former la phase désirée monophasée en faisant un broyage suivi d'un recuit de 30 min au lieu d'un recuit de 7 jours pour les composés massifs. Ceci représente un gain de temps non négligeable. D'après les mesures magnétiques effectuées, tous les composés possèdent une transition de phase de second ordre. Leur température de Curie augmente avec le taux d'Al et de Dy alors que la variation d'entropie diminue légèrement. Par ailleurs, l'insertion d'atomes interstitiels tels que le carbone a été réalisée. On remarque une nette amélioration de la température de transition. Il ressort de cette étude que ces composés présentent un grand intérêt dans la recherche de futurs matériaux magnétocaloriques pour la réfrigération magnétique à température ambiante / The intermetallic compounds based on rare earth and transition metals present interesting magnetic properties for technological applications (permanent magnets, high density magnetic recording, magnetic refrigeration ...).This work is dedicated to the study of structural, magnetic and magnetocaloric of Pr2Fe17 compounds Th2Zn17-type structure. The intrinsic magnetic properties of these compounds are improved due to the substitution (iron and aluminum by praseodymium by dysprosium) and / or the insertion of a light element (carbon). Intermetallic nanomaterials are prepared by high energy milling and subsequent annealing, which could lead to non-equilibrium phases. The homogeneity of these alloys was checked by X-ray diffraction and by transmission electron microscopy. The results have showed that single-phase can be obtained by milling and annealed during 30 min instead of 7 days annealing for bulk compounds. This represents a considerable saving of time. From the magnetic measurements, all compounds exhibit a second order phase transition. Their Curie temperature increases with the rate of Al and Dy as the entropy change slightly decreases. Moreover, the insertion of interstitial atoms such as carbon was achieved. We notice a significant improvement of the transition temperature. It appears from this study that these compounds are of great interest in the search for future magnetocaloric materials for magnetic refrigeration at room temperature

Caloric materials show prospect in replacing the function of vaporcompression systems in todays cooling devices, resulting in more energy efficient cooling and eliminating the need for refrigerents which contribute to climate change. This project has focused on magnetocaloric materials, which experience changes in temperature when exposed to magnetic fields. A step to finding viable materials is developing realistic simulations. To this end, this project has investigated if the calculated magnetocaloric effect is impacted by the choice of statistic. Three systems have been studied, bcc Fe, FeRh and Fe2P, using Monte Carlo simulations. The results have shown differences in the calculated entropy change depending on the statistic of choice. The quantum statistics have shown a ∆S = 0 below the phase transition, unlike the classical statistics. At the phase tranisitions quantum statistics resulted in either similar or smaller values for the calculated change in entropy. / Kaloriska material har potential att i framtiden ersätta funktionen hos ångkomprimeringssystem i dagens kylapparater, vilket i sin tur kan leda till mer energieffektiv kylning samt eliminerar behovet av kylmedier som bidrar till klimatförändringen. I detta projekt ligger fokus på magnetokaloriska material, vilka erfar temperaturförändringar då de utsätts för magnetfält. Ett steg mot att hitta gångbara material är att utveckla realistiska simulationer. För detta ändamål undersöktes huruvida den beräknade magnetokaloriska effekten påverkas av valet av statistik. Tre system studerades, bcc Fe, FeRh samt Fe2P, med hjälp av Monte Carlo simulationer. Resultaten visade skillnader i den beräknade entropiförändringen beroende på valet av statistik. För kvantstatistiken var  ∆S = 0 för temperaturer under fasövergångerna, vilket skiljde sig från de klassiska resultaten. Vid fasövergångarna gav kvantstatistiken liknande eller mindre värden för den beräknade entropiförändringen.

The effect of doping on the crystal structure, magnetic, magnetocaloric and transport properties of MnM′Ge (M′ = Ni, Co) intermetallic compounds and NiMnX (X = Sn, In) Heusler alloys have been studied by room temperature X-ray diffraction (XRD), differential scanning calorimetry (DSC), and magnetization measurements. The studied magnetic systems include Ni1-xCrxMnGe1.05 (0 ≤ x ≤ 0.120), Mn1-xAlxCoGe (0 ≤ x ≤ 0.05), MnCo1-xZrxGe (0.01 ≤ x ≤ 0.04), Mn1-xAgxCoGe (0.01 ≤ x ≤ 0.10), Ni50-xRxMn35Sn15 (x = 0, 1 and R = La, Pr, Sm), Ni43-xRxMn46Sn11 (x = 0, 1 and R = Pr, Gd, Ho, Er), and Ni50Mn35In15-xBix (0 ≤ x ≤ 1.5).A temperature induced first-order structural transition characterized by a change in crystal structure from high temperature austenite phase (AP) with Ni2In-type Hexagonal structure to low temperature martensite phase (MP) with TiNiSi-type orthorhombic structure was observed at T = TM (martensitic transition temperature) in some of the MnM′Ge-based compounds. The partial substitution of doping elements such as Cr, Al, Zr, and Ag resulted in a decrease in TM and at certain concentration, TM was found to decrease below / coincide with the ferromagnetic transition temperature (TC) of AP. Therefore, such system show a first-order magnetostructural transition (MST).In Ni1-xCrxMnGe1.05, a MST from antiferromagnetic (AFM) orthorhombic to ferromagnetic (FM) hexagonal phase was observed for 0.105 ≤ x ≤ 0.120. Both direct and inverse MCE were observed in this compound. The peak values of the magnetic entropy change (ΔSMpeak ) in the vicinity of TC for ΔH = 5T were found to be 4.5 J/kg K, 5.6 J/Kg K, and 5.1 J/Kg K for x = 0.105, 0.115, and 0.120 respectively. A magnetic field-induced transition from an AFM to a FM state in the martensite structure was observed in annealed Ni0.895Cr0.105MnGe1.05 melt-spun ribbons, which led to a coupled MST from a FM martensite to a PM austenite phase with a large change in magnetization. As a result of the field-induced MST, a large ΔSMpeak value of 16.1 J kg-1 K-1 (which is about a four times larger than the bulk) and Refrigeration capacity (RC-1) =144 J kg-1 at μ0∆H = 5 T was found. It was also found that the ribbon samples showed excellent magnetic reversibility that is important for application. MCE parameters, adiabatic temperature change (∆Tad) and |〖∆S〗_M |, with maximum value of ~ 2.6 K (µoH = 10 T) and 4.4 J kg-1 K-1(µo∆H = 5 T), respectively, were observed in the vicinity of TC. The ∆Tad (T) curves obtained for µoΔH = 10 T and magnetization isotherms were found to be completely reversible, which indicates the reversibility of the MCE in this system. A large temperature span (of about 61 K) and a non-saturating behavior of ∆Tad were observed at magnetic fields up to 10 T. The adiabatic temperature change was found to be a linear function of (µoH)2/3 near TC in accordance with Landau’s theory of phase transitions.In MnCoGe compounds doped with Al, Zr, and Ag, a tunable MST from the paramagnetic hexagonal to ferromagnetic orthorhombic phase was observed. The maximum ΔSM values of about 18, 7.2, and 22 J kg-1 K-1for ∆H = 5T at TM was observed for Al, Zr, and Ag doped compounds, respectively. The corresponding maximum value of RC was found to be (303, 266, and 308) JKg-1.The new compounds containing low concentration of rare earth (R) metals: Ni50-xRxMn35Sn15, Ni43-xRxMn46Sn11, with R = La, Pr, Sm, Gd, Ho, Er and Ni50Mn35In15-xBix were synthesized. The compounds crystallized in the cubic L21 austenite phase (AP) or a mixture of AP and low temperature martensitic phase (MP) at room temperature. For Ni50-xRxMn35Sn15 and Ni43-xRxMn46Sn11 alloys, TM shifted towards higher temperature with rare-earth doping, thus stabilizing the MP at higher temperature. A maximum shift in TM by ~ 60-62 K relative to the parent compound (TM = 190-195 K) was observed for the Ni49LaMn35Sn15 and Ni42PrMn46Sn11. TM shifted towards lower temperature if Bi is placed in In position in Ni50Mn35In15-xBix. A maximum shift of ~ 36 K was detected for x = 1.5. Abnormal shifts in TC and TM to higher temperatures were observed at high field for Bi concentration ≥ 0.5.The ground state magnetization decreased with the rare-earth doping and increasing Bi content. The compounds exhibit both inverse and normal magnetocaloric effects. Large values of ∆SM = 12 (Ni49PrMn35Sn15), 32 Jkg-1K-1(Ni42PrMn46Sn11), 28 Jkg-1K-1 (Ni42GdMn46Sn11), 25 Jkg-1K-1 (Ni42HoMn46Sn11), 40 J/kg K (Ni50Mn35In15) and 34 J/kg K (Ni50Mn35In15-xBix, x = 0.25) were found at TM for ∆H = 5T that can be tuned in a wide temperature range. RC values ranging from 267-336 Jkg-1 at TC, 182 -250 Jkg-1 at TM and 144-165 Jkg-1 at TC were found with ∆H = 5T for Ni50-xRxMn35Sn15, Ni43-xRxMn46Sn11, and Ni50Mn35In15-xBix, respectively. Significant magnetoresistance (MR) values of -30%, -20 % and -30% were observed in Ni49LaMn35Sn15, Ni42GdMn46Sn11, and Ni50Mn35In14.5Bi0.5 compounds, respectively, at TM and ∆H = 5T. A large exchange bias effect with HEB ~ 1.1 kOe at 10 K was observed for the Ni42PrMn46Sn11 compound in its MP. Thus, the pronounced multifunctional properties such as shape memory effects, MCE, EB, and MR make these new systems promising for the ongoing development of magnetocaloric and multifunctional technologies.

No description available.

No description available.

This work presents study of magnetocaloric properties of compounds exhibiting unusual magnetic characteristics. Several systems were studied: TbNiAl, (Tb,Y)NiAl, TbNi(Al,In), TbFeAl, GdFeAl, Ni2MnGa based compounds and amorphous metallic alloy Gd-Co-Al-Y. Influence of magneto-crystalline anisotropy on magnetocaloric effect was studied on singlecrystalline sample of TbNiAl compound. The maximum of entropy change was measured with orientation of magnetic field along c axis and compared to polycrystalline sample a 100% increase was observed. Substitutions of Y and In in TbNiAl led to a change of magnetic ordering. Both substitution led to increase of RCP values of studied material. TbFeAl and GdFeAl compounds, characterized by partial disorder of Fe and Al atoms, showed magnetocaloric effect in wide temperature region which led to interesting values of RCP~350 J kg-1 . Very broad region of magnetocaloric effect was also observed on amorphous metallic material of Gd-Co-Al-Y. The effect of Er substitution in Ni2MnGa based compound on its magneto-structural transition, connected with inverse magnetocaloric effect, was studied. The direct measurement method of adiabatic temperature change is described and instrument for such measurement, developed in collaboration with FZU AVČR, v.v.i., is presented.

Masters of Science / Rare-earth (RE) compounds have been an attractive subject, based on the unique electronic structures of the rare-earth elements. In particular, the RETX (RE = rare-earth, T = 3d/4d/5d, transition metals, and X = p – block elements) series is a large family of intermetallic compounds which crystallizes in different crystal structure depending on the constituents. Most of these compounds crystalize in the hexagonal, orthorhombic, and tetragonal crystal structure. On the other hand, the family of compounds RET2X2 adopted the tetragonal crystal structure of the ThCr2Si2 or the CaBe2Be2 with different space groups. Owing to the different crystal structure, these compounds show versatile magnetic and electrical properties such as Kondo effect, complex magnetic behaviour, valence fluctuation, unconventional and conventional superconductivity, heavy fermion behaviour, Fermi and non – Fermi liquid behaviour, metamagnetism, spin – glass, memory effect, crystal electric field (CEF), magnetoresistance and magnetocaloric effect. The history of magnetism reveals that it is closely related to practical applications and magnetic materials from the most vital components in many applications. These are memory devices, permanent magnets, transformer cores, magneto-mechanical devices and magneto-electronic devices. Recent additions to this list include magnetic refrigeration through the studies of magnetocaloric effect as well as spintronics. Magnetic refrigeration (MR) is an emerging technology and shows real potential to enter conventional markets and the principles of MR obeys the magnetocaloric effect (MCE), which is based on the effect caused by a magnetic field on the materials that accept the property of varying the magnetic entropy, as well as its temperature when varying the magnetic field. In this thesis, we report giant magnetocaloric effect and magnetic properties of NdPd2Al2 and RECuGa (RE = Nd, Dy, and Ho) compounds. These investigations were done through measurements of X – ray diffraction (XRD), magnetic susceptibility, ((T)), magnetization, (M(H)), isothermal magnetization, (M(H, T)), heat capacity, (Cp(T)) and electrical resistivity, ((T)). MCE has been studied from the isothermal magnetization and heat capacity measurements.The first chapter of the thesis describes the theoretical background from which the experimental results have been analyzed and interpreted. This is followed by the chapter which presents experimental details and methodology carried out in this thesis. Chapter three presents the results and discussion of the transport, magnetic and magnetocaloric properties of NdPd2Al2 compounds. XRD studies confirm the tetragonal CaBe2Ge2 – type structure with space group P4/nmm (No. 129). The results of (T), (T) and Cp(T) indicate a putative antiferromagnetic (AFM) phase transition at low temperature at, TN = 3 K. On the other hand, (T) data at high temperatures follow the Curie – Weiss relationship giving an effective magnetic moment close to that expected for the trivalent Nd3+ ion. The magnetization results indicate metamagnetic – like transition at a low field that bears a first-order character which corroborates with the Below – Arrott plots. Giant MCE was obtained for the NdPd2Al2 compound similar to those reported for potential magnetic refrigerant materials. Chapter four discusses the magnetic and thermodynamic properties of the series of compounds RECuGa where RE = Nd, Dy, and Ho. XRD studies indicate the orthorhombic CeCu2 – type crystal structure with space group Imma (No. 74) for all three compounds. Magnetic measurements indicate a putative AFM phase transition below 𝑇𝑁 = 7.1, 8.5, and 3.7 K for Nd, Dy, and Ho compounds, respectively. The high-temperature (T) data for all three compounds follow the Curie – Weiss relationship giving an effective magnetic moment close to that expected for the trivalent rare-earth ion. Again, large MCE were obtained for all three compounds similar to those reported for materials that can be used as magnetic refrigerant materials.

No description available.

The magnetic properties of NiMnGe1−xAlx, Ni50Mn35(In1−xBx)15, Ni50Mn35In14.5B0.5 (Bulk, As-Solidified and Annealed melt-spun ribbon) and RE-Infuse Carbon Nanotubes, have been studied by x-ray diffraction, differential scanning calorimetry (DSC), and magnetization measurements. Partial substitution of Al for Ge in NiMnGe1−xAlx results in a first-order magnetostructural transition (MST) from a hexagonal ferromagnetic to an orthorhombic antiferromagnetic phase at 186 K (for x = 0.09). A large magnetic entropy change of ∆SM = -17.6 J/kg K for ∆H = 5 T was observed in the vicinity of TM = 186 K for x = 0.09. This value is comparable to those of well-known giant magnetocaloric materials, such as Gd5Si2Ge2, MnFeP0.45As0.55, and Ni50Mn37Sn13. The values of the latent heat (L = 6.6 J/g) and corresponding total entropy changes (∆ST = 35 J/kg K) have been evaluated for the MST using DSC measurements. Large negative values of ∆SM of -5.8 and -4.8 J/kg K for ∆H = 5 T and up to 9T in the vicinity of TC were observed for x = 0.09 and 0.085, respectively. The impact of B substitution in Ni50Mn35In15-xBx Heusler alloys on the structural, magnetic, transport, and parameters of the magnetocaloric effect (MCE) has been studied by means of room-temperature X-ray diffraction and thermomagnetic measurements (in magnetic fields (H) up to 5 T, and in the temperature interval 5-400 K ). Direct adiabatic temperature change (ΔTAD) measurements have been carried out for an applied magnetic field change of 1.8 T. The transition temperatures (T-x) phase diagram has been constructed for H = 0.005 T. The MCE parameters were found to be comparable to those observed in other MCE materials such as Ni50Mn34.8In14.2B and Ni50Mn35In14X (X=In, Al, and Ge) Heusler alloys. The maximum absolute value of ΔTAD = 2.5 K was observed at the magnetostructural transition for Ni50Mn35In14.5B0.5. The structural phase transition temperatures, phase structure, and parameters of the magnetocaloric effect (MCE) of Ni50Mn35In14.5B0.5 as Bulk, As-Solidified and Annealed melt-spun ribbon has been studied by means of room-temperature X-ray diffraction and thermomagnetic measurements (in magnetic fields (oH) up to 5 T, and in the temperature interval 5–400 K). Magnetic and structural transitions in Ni50Mn35In14.5B0.5 as ribbons were found to coincide in Ni50Mn35In14.5B0.5 bulk sample, leading to a large magnetocaloric effects associated with the first-order magnetostructural phase transition. In comparison to the bulk Ni50Mn35In14.5B0.5 alloys, both the martensitic transition temperature (TM) and Curie temperature (TC) shifted to lower temperatures. Magnetic measurements revealed that the ribbons undergo a structure transformation similar to the bulk material at the martensitic transformation. The temperature of the transformation depends strongly on lattice parameters of the ribbons. MST shows a weak broad magnetic transition at TCM∼ 160 K, while the Curie temperature of AST TCA is ∼ 297 K. The MCE parameters were found to be comparable to those observed in other MCE materials such as Ni50Mn34.8In14.2B and Ni50Mn35In14X (X = In, Al, and Ge) Heusler alloys. These results suggest the possibility to control the martensitic transition in Ni50Mn35In14.5B0.5 through rapid solidification process. A comparison of magnetic properties and magnetocaloric effects in Ni50Mn35In14.5B0.5 alloys as Bulk, As-Solidified and Annealed ribbons is discussed. Carbon nanotube (CNT)/metal-cluster-based composites are envisioned as new materials that possess unique electronic properties which may be utilized in a variety of future applications. Super paramagnetic behavior was reported for CNTs with Gd ions introduced into the CNT openings by internal loading with an aqueous GdCl3 chemical process. In the current work, the magnetic properties of the CNT/Gd composites were obtained by the joining and annealing of Gd metal and CNTs at 850 °C for 48 h. Energy dispersive X-ray analysis shows the presence of Gd intermingled with the CNT walls with maximum and average Gd concentrations of about 20% and 4% (by weight), respectively. The Gd clusters have a non-uniform distribution and are mostly concentrated at the ends of the CNTs. A ferromagnetic-type transition at TC ∼ 320 K, accompanied by jump like change in magnetization and temperature hysteresis typical for the temperature induced first order phase transitions has been observed by magnetization measurements. It was found that Gd infused into the CNTs by the annealing results in a first order paramagnetic-ferromagnetic transition at TC = 320 K.