1 |
Gold-sulphide mineralisation in the Giyani Grrenstone Belt case studies at Black Mountain and West-59 targets, Limpopo Province, South AfricaMuzerengi, Confidence 30 January 2015 (has links)
Department of Mining and Environmental Geology / MESMEG
|
2 |
Synthesis, characterization and performance evaluation of iron (III) oxide coated bentonite clay-silica rich reddish black Mukondeni clay soils composites for the defluoridation of groundwaterNgulube, Tholiso 05 1900 (has links)
MENVSC / Department of Ecology and Resource Management / See the attached abstract below
|
3 |
Evaluation of Nebulas Gold Deposit in Giyani Greenstone Belt, Limpopo Province, South AfricaMavhungu, Mbofholowo Emmanuel 18 May 2018 (has links)
MESMEG / Department of Mining and Environmental Geology / Giyani Greenstone Belt is known to host significant amount of gold of which about 10 tonnes were extracted from the belt in the 19th century. Due to increased gold price and mining practices that make it economic to mine low-grade ore deposits, major gold deposits within the belt have been the main targets for exploration while Nebulas Prospect remain unnoticed. To make the Nebulas Prospect attractive for investment, its gold mineralization potential needed to be investigated.
The main purpose of this study was to conduct assessment of the probable gold mineralization in the Nebulas Prospect and its economic viability. The specific objectives were to establish the gold mineralized zones within the Nebulas Prospect, develop a geological model showing the geometry and placement of gold in the subsurface, establish gold grade distribution and its economic implication, and select the most appropriate and practical mining method for exploitation of the established gold deposit. The research approaches used in achieving these objectives comprised of knowledge driven predictive modelling of Nebulas Prospect to derive prospectivity map demarcating the area with the potential of hosting gold mineralization. Magnetic survey was conducted in geological permissive areas, thereby establishing boundaries of mineralization, both lateral and vertical. Geological and subsurface gold grade distribution were carried out by means of trenching and pitting. The integration of the geological, geophysical and geochemical data using Geosoft 8.5 and ArcGIS 10.5 assisted in development of a gold deposit model that model illustrates distribution and concentration of gold.
Results of the investigation reveals that Banded Iron Formation (BIF) dominates the southern part of the study area while quartz vein and schist dominate the northern part. The application of knowledge driven predictive modelling established mineral prospectivity map for Nebulas Prospect, which narrowed the potential area for further investigation. The area located outside the boundary of prospective area indicated low mineralization potential compared to highly mineralized zone within geological permissive boundary.
The two mineralize zones which exits in the Nebulas Prospect are separated by pegmatite intrusion which is observed from magnetic data presentation. The gold is hosted within BIF, schist and quartz vein. The highest concentration observed value of 10.65 g/t is hosted in serpentine schist and lowest significant of 1.24 g/t in BIF. The gold grades are higher in schists than in BIF and quartz veins. The Nebulas Prospect present significant measured
iv
gold mineral resource with substantial economic potential. The evaluation of the technical aspects of the Nebulas Gold Deposit, which include grade and tonnage was estimated through longitudinal vertical section method. The gold hosted within Banded Iron Formation (BIF) comprise a measured gold resource of 6957.6 t at an average weighted grade of 2.22 g/t Au. However, the gold mineralization hosted within tremolite-mica schist, serpentine schist and quartz veins comprise a measured gold resource of 3919.37 t with average grade of 3.8 g/t Au. The Nebulas Gold Deposit contain a significant grade and tonnage.
At an assumed currently economically mineable cutoff grade 1 g/t Au, Nebulas Prospect has a measured resource of 10877 t at a weighted average grade of 2.79 g/t Au. Analytical hierarchy process (AHP) was used to prioritize the factors affecting mining method selection and ranking of potential mining method, technically appropriate for the established gold deposit in Nebulas Prospect. Open pit mining method was identified as appropriated for extraction of the Nebulas Gold Deposit. / NRF
|
4 |
Mineralogy and geochemistry of geophagic materials from Mashau Village in Limpopo Province, South AfricaMashao, Unarine 18 May 2018 (has links)
MESMEG / Department of Mining and Environmental Geology / Literature indicated that several mineralogical identification studies have been carried out on clays but few have focused on the characterisation of geophagic materials from South Africa. Large quantities of earth materials are consumed daily in Mashau Village, however, their mineral content and geochemical compositions had not been determined. Moreover, though the consumption of geophagic materials is very common in the village, the associated health implications had not been addressed. Thus, the main aim of the research was to mineralogically and geochemically characterise geophagic materials commonly ingested in Mashau Village and infer on possible health implications that could result from their consumption. Questionnaires were administered to geophagists in the study area with the aim of generating data on the prevalence of geophagia and the motivations for the practice. Geophagic soils and their parent rocks (for determination of provenance) were sampled and analysed for mineralogical and geochemical content. Geophagic soil samples were subjected to the following physicochemical analyses: colour, particle size distribution, pH, cation exchange capacity (CEC) and electrical conductivity (EC). An x-ray diffractometer (XRD) was used for mineralogical analysis while major oxides and trace elements abundances were determined using x-ray fluorescence (XRF) spectrometry and laser ablation inductively coupled mass spectrometry (LA-ICP-MS), respectively. Furthermore, provenance of the geophagic materials was determined using data obtained from mineralogical and geochemical analysis. Inferred health implications were based on the physico-chemical, mineralogical and geochemical data obtained. Outcomes of the questionnaire survey revealed craving to be the motivation for geophagia in Mashau Village. Although the practice seemed to be prevalent in females of certain ages, it was certainly not limited to gender, age, educational level or socio-economic status. Out of the 20 geophagic samples, 3 samples were brown, 2 had a strong brown colour and another 2 had a light olive brown colour. Other soil colours were less common, as each colour was only observed in one sample. The sand fraction dominated the samples; the clay content was low, giving the samples a sandy clay loamy texture. The pH of the soil ranged from being slightly acidic (5.4) to being slightly alkaline. The CEC values were very high ranging from 17 t0 109 meq/100 g.
vii
The EC values were also high (ranging from 11.2 to 245 μS/cm) indicating a high amount of soluble salts. Mineralogical analysis of geophagic soils identified quartz, microcline, plagioclase, hornblende, dolomite, muscovite, kaolinite, smectite, talc, anatase, hematite, ilmenite, chlorite and epidote with quartz and kaolinite being the dominant minerals. Actinolite, augite, chlorite, epidote, forsterite, magnetite, muscovite, plagioclase, quartz, sepiolite and microcline were the minerals identified in rock samples. Geochemical analysis for major oxides content (SiO2, TiO2, Al2O3, Fe2O3, MnO, MgO, CaO, Na2O, K2O, P2O5 and Cr2O3) indicated that both geophagic soils and parent rocks were mainly composed of silica and alumina. Trace elements geochemistry showed a depletion of LREEs and an enrichment of HREEs in geophagic soils. The results also revealed that the REEs were enriched in the bulk fraction than in the clay fraction. Relative to the Upper Continental Crust (UCC) compositions, the concentrations of trace elements in geophagic soils were generally low. Provenance determination results showed that geophagic soils in Mashau were derived from basalts and sandstones. Majority of the samples were formed as a result of intense weathering while some were as a result of intermediate weathering. The negative health implications of the studied materials could include perforation of the colon, damage of the dental enamel and anaemia. However, geophagic materials could also be a good source of mineral nutrients and beneficial for reduction of nausea during pregnancy. / NRF
|
5 |
Evaluation of major clay deposits for potential industrial utilization in Vhembe District Municipality, Limpopo Province of South AfricaAkintola, George Oluwole 18 May 2018 (has links)
MESMEG / Department of Mining and Environmental Geology / Vhembe District has several clay deposits which are traditionally use for clay products such as burnt bricks without taking into account the chemical and mineralogical characteristics of clay being used. The ever-increasing market demand for these clay products cannot be met with the traditional method of clay utilization due to the paucity of scientific information on properties of the clay in the area. Consequently, there is a need to gain better understanding of the characteristics of the clay in Vhembe District and to establish the suitability of the variety of clay for different purposes.
The current study was undertaken to better understand the compositional relationship between the clay deposits and surrounding rocks present in the study area. It further aimed at characterizing the clay deposits on the basis of chemical, mineralogy, physical, mechanical, thermal and micro structural properties with a view of evaluating the clays for possible industrial use. A total of thirty-nine clay and rock samples were collected from thirteen different locations across the Vhembe District. Thirteen representative samples from each location were obtained after thorough mixing until homogenization was attained and then quartered for subsequent analyses.
The mineralogical and chemical characteristics of the clay and rock samples were determined using XRD and XRF respectively. Thin-sections of the rock samples were prepared and examined under petrographic microscope to better understand the mineral assemblages present in the rocks. The thermal and micro structural properties of the clays were determined using DTA-TGA and SEM analyses and the physical properties which include colour, cation exchange capacity (CEC) and soil pH were assessed. The particle distribution and Atterberg limits tests of the clay samples were also conducted in order to establish their mechanical properties.
The petrographic results showed that the clay deposits exhibited an intense weathering and sedimentation processes which incorporated detrital minerals from the surrounding rock units. The rock units which include basalt, granodiorite, gneiss and quartzofeldspathic gneiss were found to be differentiated from subalkaline and/or tholeiitic magmatic composition. Although the value of SiO2 content in rock samples was higher when compared with clay samples, it indicated an ongoing desilicication and allitization processes. The high values of chemical index of alteration (CIA), low values of K/Cs (<6200), Ce* normalized value and higher values of LILE enrichment in the clay deposits indicated oxidizing environments during period of deposition.
v
The mineralogical composition of the studied clayey deposits showed that smectite (8.25 - 29.32%), kaolinite (14.91 - 59.26%) and chlorite (5.94 -16.54%) were present as clay minerals although associated with other non-clay minerals such quartz, plagioclase, talc and geothite. The chemical composition results revealed high silica and alumina content in most studied clay samples. Their fluxing oxides which include K2O, Na2O, CaO, and MgO, varied slightly from 0.06% to 1.78% in abundance while the Fe2O3 and TiO2 contents in most samples averages at 9.2% and 1.3% respectively. The plasticity index of the studied deposits ranged from 9.50 to 62.00% while liquid limit ranged from 31.34 to 73.62%.
The microanalysis using SEM indicated that the microstructure framework of most studied clay exhibited a porous skeleton structure owing to numerous tiny voids. The composite results of SEM and CEC analyses suggested their possible application in water filter and chemical fertilizer industries since they provided passage for water and soil cations transmission. The particle size distribution demonstrated that the studied soils have clayey silt texture with wide range coverage of the well graded and sorted particle sizes. Compressibility and plasticity properties were found to be high in Mukondeni, Mashamba-1, Mashamba-2 and Mashamba-3 clay samples. The thermal behavior of Mukondeni, Mashamba-1, Mashamba-2 and Mashamba-3 samples showed relatively high shrinkage (>9%). The high shrinkage percentage suggests the preponderance of smectite minerals. Other samples which are rich in kaolinite and chlorite minerals exhibited low shrinkage (<2%). The drying trends of the studied clay suggest their suitability for fast drying processes like soft and hard refractoriness, sanitary wares and ceramics. Empirical assessment of most studied clay showed their suitability for pottery-making and manufacturing of roofing tiles and masonry bricks. / NRF
|
6 |
Investigation of the Geology, Structural Setting and Mineralisation the Copper-Sulphide Deposits in the Messina Area, Limpopo Mobile Belt, South AfricaMundalamo, Humbulani Rejune 20 September 2019 (has links)
PhDENV (Geology) / Department of Mining and Environmental Geology / The study focused on the geology, structural setting and mineralisation of copper-sulphide deposits in the Musina area, located in the Central Zone of the Limpopo Mobile Belt of South Africa. The Messina copper deposits are located in the eastern part of Limpopo Province near the border with Zimbambwe. The deposits stretch from northeastern to southwestern direction for about 15 km. Previous copper mining in the area took place at Artonvilla, Messina, Harper, Campbell and Lilly copper deposits. The current study, however, focused on two main deposits, Campbell and Artonvilla.
The origin, nature and mode of formation of the Cu-sulphide deposits in the Musina area have not been established with certainty. Two principal hypotheses on the origin of the Messina copper sulphide deposits have been proposed, viz; a magmatic-hydrothermal model, and meteoric waters model. Consequently, the mode of formation and mineralisation style of the Messina Cu-sulphide deposits remain contentious. Therefore, the main objective of the study was to investigate the nature and mode of formation of Cu-sulphide deposits in the Musina area.
Different research methods have been applied in the current study so as to unpack the contradictory positions on the genesis of the Messina copper deposits. This included fieldwork, remote sensing data acquisition, laboratory work, and data analysis and interpretation. Fieldwork involved soil geochemical survey as well as rock and ore sampling within the study area. A total of 295 soil samples, 33 rock specimens and 21 ore samples were collected for laboratory investigation.
Laboratory work consisted of a range of methods that included; geochemical analysis, petrographic and cathodoluminescence microscopy, ore mineralogy and ore microscopy, fluid inclusion geothermometry and isotope geochemistry. The work was done in different laboratories including: Mining and Environmental Geology Laboratory, Unviersity of Venda; Department of Geology Laboratory, University of Johannesburg; MINTEK Laboratory in Johannesburg; Société Générale de Surveillance Laboratory in Johannesburg, South Africa; Department of Applied Geology, Geoscience Institute, Göttingen University, Germany and Department of Geology, University of Georgia, Athens, United States of America. Remote
sensing data was acquired from Southern Mapping Company, Johannesburg, South Africa. Interpretation of Remote sensing data was done at the University of Applied Sciences, Oswestfalen-Lippe, Germany.
Data analysis and interpretation of laboratory results involved the use of: Desktop ArcGIS 10.4.1 for geochemical data interpretation; ENVI 5.1 and ArcGIS 10.4.1 Softwares for remote sensing data; and Triplot version 4.1.2 software for ternary plot for compositional variation of rocks.
Soil geochemical survey revealed geochemical anomalies for Pb, Zn, Cu, As and Ni over the known copper deposits in the area as well as over six other areas that have not been associated with any sulphide mineralisation. Such new anomalous areas have been identified as target areas for future exploration of sulphide ore mineralisation.
Petrographic studies of the rocks confirmed the host rocks to be amphibolite-quartz granulite, biotite-garnet-quartz granulite, amphibolite, quartzite, hornblende gneiss, quartzo-feldspathic gneiss, potassium-feldspathic gneiss and cal-silicate gneiss. These rocks were subjected to hydrothermal alteration during ore mineralisation within the area. It was further noted that epidote alteration was quite intensive in ore samples, while in unmineralised rock samples it was less intensive. Remote sensing data interpretation revealed spatial distribution and intensity of epidote alteration within the study area and in places coincided either with the known copper deposits or structural features, thus led to the identification of target areas for future mineral exploration in the Musina area.
The current study established that the process of ore mineralisation in the Messina copper deposits took place in two distinct phases: first the formation of garnet, graphite, magnetite and hematite during regional metamorphism of the Limpopo Mobile Belt; and secondly, sulphide ore mineralisation resulting in the formation of copper ore comprising, veined, disseminated and brecciated ores. Sulphide ore mineralisation consisted mainly of pyrite, chalcopyrite, sphalerite, bornite, chalcocite and minor pyrrhotite and galena as well as traces of pentlandite, tennantite, mollybdenite, cobaltite and tetrahedrite. This confirms that the Messina copper deposits had complex sulphide ore mineralisation that is typical of hydrothermal mode of ore mineralisation from a magmatic source.
The study further establishes the paragenitic sequence of ore mineralisation, comprising four stages: Stage I (Garnet- graphite – Fe oxides); stage II (Quartz- pyrite); stage III (Pyrite- sphalerite - chalcopyrite); and stage IV (Carbonates). Stage III represented the main stage of sulphide ore mineralisation in the area, while Stage IV comprising calcite, dolomite and ankarite marked the final stage of hydrothermal ore mineralisation.
Paragenetic sequence identified three generations of quartz; first generation being associated with garnet, graphite, magnetite and hematite, second generation with pyrite and third generation with pyrite, sphalerite and chalcopyrite. Previous studies, however, indicated that there was only one generation of quartz that formed at the temperature between 210o to 150°C, but the current study established that the entrapment temperature of first generation quartz ranges from 315o to 200°C; second generation quartz from 235o to 135°C and third generation quartz from 240o to 115°C. At the same time, sulphur isotope investigation of chalcopyrite-pyrite pair from Campbell deposit registered a temperature of 359°C. The study therefore concluded that the temperature of ore formation within the Messina copper deposits ranged between 359°C and 115°C.
The presence of halite and calcite as daughter minerals within the fluid inclusions was noted and this apparently is indicative of high salinity of fluid inclusions, which is considered as a product of direct exolution of crystalizing magma. Raman spectroscopy revealed the composition of gases in the fluid inclusions to be CH4 and N2 with 80% and 20% composition respectively, however, some inclusions were gas-poor. The presence of gases in the fluid inclusions is an indication that there was boiling at the time of entrapment. A narrow range of 34S values of -0.5 to 0.5‰ obtained in this study further confirms the magmatic source of Sulphur as Sulphur from the host rock was found to have high 𝛿34S value of 8.2‰.
A genetic model for copper ore mineralisation within Musina area is proposed. The deposits are of polymetallic vein type that are genetically associated with porphyry copper deposits. According to this model, copper ore bodies were formed from hydrothermal fluids originating from magma and were epigenetic in nature. Geological structures in the area acted as conduits for hydrothermal fluids that resulted in the alteration of the host rocks and mineralisation of copper sulphide ore. Thus, the Messina coper deposits are of magmatic hydrothermal origin although the apparent location of a batholith is still unknown and the study recommends further
viii
research work on the location of the batholith that is presumed to have been the magmatic source. The study further recommend dating of later rocks as well as orebody s it is essential for understanding the process of ore formation in this area.
For further exploration, areas that have undergone “moderate” to “high” degree of epidote alteration and lie in close proximity to geological structures such as faults and thrust folds that could have acted as conduits for hydrothermal fluids and resulted in sulphide ore mineralisation and registered high geochemical anomalies for Pb, Zn, As and Ni should be targeted. In support of further mineral exploration within the study area, the study recommend a detailed geostatistical application for the purpose of delineating homogeneous areas based on the combination of lineaments, interpolated soil geochemical maps and thematic maps. / NRF
|
7 |
Interaction of gold mine taillings leachates with soil and geochemical partitioning of toxic metal speciesNgoetjane, Pitsi Christopher 02 February 2016 (has links)
Department of Ecology and Resource Management / MENVSC
|
8 |
The application of the modified crude settleable dust approach as a viable asbestos mineral test methodKwata, Maphuti Georgina 11 1900 (has links)
Text in English with abstracts and keywords in English, Afrikaans, Sepedi and Sesotho / Soil and other geological materials found on the crust of the Earth are known to be rich in naturally occurring silicate minerals. Asbestos is one of the fibrous silicate minerals that was mined predominantly in some regions of Limpopo, Mpumalanga and Northern Cape provinces in South Africa. Despite the cessation of asbestos mining due to associated human health effects in 2002, there is still a concern about possible environmental exposure to asbestos fibres. A single asbestos fibre is made of millions of microscopic needle-like fibrils which break easily to produce inhalable size fractions that are reported to cause lung diseases.
The main source of asbestos fibres in former mining areas is asbestos mine dumps and asbestos contaminated surface soil. Asbestos mine dumps in Limpopo Province are partially rehabilitated, while in Mpumalanga Province they are not rehabilitated and all these dumps are now under the care of government because the original owners have abandoned them. The settleable dust is the first indicator of airborne dust pollution and the rate of settleable dust rates was used to select the sites to be monitored.
A pilot study was conducted to test the performance of the ASTMD1739:1998 and ASTM D 1739:1970 methods. The method was further modified and optimized to measure asbestos load in settleable dust samples. A total ten sites located around vulnerable human settlements that are in close proximity to the abandoned asbestos mine dumps were chosen in Mpumalanga and Limpopo Provinces respectively. Airborne, surface and trapped dust samples were collected once a month around human settlements that are in close proximity to the abandoned asbestos mine dumps from April 2016 to June 2017. Airborne dust samples were collected using the official settleable dust monitoring method, the general particulate matter E-sampler and the official asbestos Air-Con 2 sampler. Surface dust was collected outdoors around the settleable dust collection units using a brush and dust pan and was stored in labeled zipper bags made of plastic material. Trapped dust samples were collected using sticky tape both indoors and outdoors around the window panes, on surfaces of furniture and on windscreens of old cars and were stored in labeled closed containers. Surface soil samples were also screened with the hand held asbestos analyser before collection.
The samples were extensively and carefully prepared and handled to avoid or minimize cross contamination using standard laboratory methods and were analysed using calibrated analytical instruments.
An adapted method (ASTMD 1739:1970) was used to determine the presence of asbestos hazard in a form of mineral count. This method was also used for the identification of asbestos and other minerals in different dust samples using the XRD technique. Physical features of all minerals such as the shape, size and type were also determined as part of the characterization process using the SEM-EDS technique.
The ASTMD1739:1998 method gave rise to higher retention of settleable dust, hence it was found to be more efficient. Unfortunately, this best performing method is not legislated or regulated by the government. This researcher concludes that the reasons could be due to the different shapes of the windshield designs (which means the
different designs of windshields) at may make it difficult to standardize and control. However, this information gap provides an opportunity of a longer focused study of this method with the intention of finding a standardized windshield design that could be recommended for use in the country.
Secondly, the units that had both water and algaecide gave rise to higher settleable
Mpumalanga. Three exceedances of 600 mg/m2/day of residential limit regulated through National Dust Control Regulation no.28 of 2013 presented in decreasing order in Limpopo were 2724 mg/m2/day at Site E, 1638 mg/m2/day at Site D and 834 mg/m2/day at Site B in the same month of March 2017 .
The XRF data of metal oxides, including these top three [Si(IV)O2, Fe2(III)O3 and Al2(III)O3], confirm the dominance of silicate minerals in surface dust samples from both provinces. The XRD mineralogy data from filtered settleable dust show the dominance of the amphibole asbestos particulates ranging from 18 to 56 % in Limpopo province and 2.0 to 3.0 % in Mpumalanga province. Low presence of serpentine minerals with the highest being 2.0 % and 7.0 % in Limpopo and Mpumalanga provinces respectively. About 8.0 to 43 % of amphibole asbestos minerals were measured on trapped dust in Limpopo together with zero detection of serpentine.
No asbestos minerals were detected on trapped dust from Mpumalanga, despite the close proximity of the unrehabilitated asbestos mine dumps
All
airborne asbestos fibres that were captured on the filter substrates were a bove the
limit value of 100 f/mL of air. The highest airborne asbestos fibre and concentration
counts m easured were 40 fibres and 0, 00434 f /mL concentration in October 2017 at
Site A. The second highest fibre count concentration was measured in June with
0,00287 f/mL at Site A in September 2017 and 0,01085 f/mL at the Site D in June
2017 monitoring sites. Again, the highest in June 2017 with 0,00125 f/mL for Site A
for Limpopo Province. In Mpumalang a the lowest asbestos fibre concentration which
are be low the OHSA no. 39 of 1993 and MDHS 39/ 4, 1995 0.1 f/mL and 100 f/mL
However, from the safety perspective all asbestos fibres or minerals inhaled are a
hazard to human health. The study established that the adapted asbestos mineral
count method succeeded in identifying and quantifying the asbestos minerals that
existed in the settleable dust samples from the study areas. These outcome s were
successfully validated with the test undertaken using both the officially (Air Con 2 sampler) and unofficial (E sampler) recognized method of asbestos fibre count. The
adapted mineral count method provides the research community with an alternative,
cost effective and user friendly method of analysis.
Also,
the validation method s gave additional new information. Of a total of 120 of ex-
posed filter papers used in the official asbestos fibre Air Con 2 sampler, 28 filters had
positive presence of asbestos fibres, making it 23 collection efficiency And of the
100 exposed filt er papers used in for E samplers, only 8% collection efficiency was
recorded. The results means that the official asbestos fibre Air Con 2 sampler has
23 more collection efficiency than the general particulate matter E sampler for air-
borne asbestos monitoring. The impact of these results could also be that a general
particulate matter high volume sampler c ould still be used for asbestos fibre monitoring
in the absence of a specific and selective Air Con 2 sampler, as long as the user
appreciates abo ut 23 collection deficiency. These findings go a long way in helping
to make air quality research domain accessible.
Since the ASTM D1739:1998 method has been found to perform better than the officially recognized method, this study recommends that the regulators of air quality in the country consider it. But, the method will first require some improvement and standardization particularly the different wind shield designs before it could be officially accepted as the method of collection and analyses for settleable dust. It is hoped that the air quality research community will take up the challenge. / Grond en ander geologiese materiale wat op die aardkors aangetref word, is bekend dat hulle ryk is in silikaatminerale wat natuurlik voorkom. Asbes is een van die veselagtige silikaatminerale wat hoofsaaklik in sommige streke van die Limpopo, Mpumalanga en Noord-Kaap Provinsies in Suid-Afrika ontgin is. Ondanks die staking van asbesmynbou in 2002 as gevolg van gepaardgaande gesondheidseffekte op mense, is daar steeds kommer oor moontlike blootstelling aan asbesvesels in die omgewing. 'n Enkele asbesvesel bestaan uit miljoene mikroskopiese naaldagtige vesels wat maklik breek om partikels van inasembare grootte te produseer wat volgens berigte longsiektes veroorsaak.
Die belangrikste bron van asbesvesels in voormalige myngebiede is asbesmynhope en besmette asbesoppervlakgrond. Asbesmynhope in Limpopo Provinsie word gedeeltelik gerehabiliteer, terwyl hulle in Mpumalanga Provinsie nie gerehabiliteer word nie, en al hierdie mynhope is nou onder die regering se toesig omdat die oorspronklike eienaars die mynhope verlaat het. Die neerslagbare stof is die eerste aanduiding van stofbesoedeling in die lug en is gebruik om die terreine wat gemoniteermoet word, te kies. 'n Loodsstudie is uitgevoer om die prestasie van die ASTMD1739:1998 en ASTMD1739:1970 metodes te toets. In die loop van die studie is 'n amptelike ASTMD1739:1970 metode gebruik en toegepas vir die versameling van neerslagbare stofmonsters. In Mpumalanga en Limpopo Provinsies respektiewelik is daar altesaam tien (10) terreine gekies rondom kwesbare menslike nedersettings wat naby die verlate asbesmynhope geleë is. Stofmonsters in die lug, oppervlak en wat vasgevang is, is een keer per maand versamel vanaf April 2016 tot Junie 2017 rondom menslike nedersettings in die nabyheid van die verlate asbesmynhope. Stofmonsters in die lug is versamel volgens die amptelike neerslagbare stofmoniteringsmetode, die E monsternemer en die Air-Con 2 monsternemer. Oppervlakstof is buite met behulp van 'n kwas en stofpan rondom die neerslagbare stofopvangeenhede opgevang en is in gemerkte ritsakke van plastiekmateriaal geberg. Stofmonsters wat vasgevang is, is met behulp van kleeflint, binne en buite, om vensterruite, op meubeloppervlaktes en op voorruitte van ou motors versamel, en is in gemerkte geslote houers geberg. Oppervlakgrondmonsters is ook voor versameling met die draagbare asbesanaliseerder gefilter. Die monsters is breedvoerig en sorgvuldig voorberei en hanteer om kruisbesmetting tot ‘n minimum te beperk deur gebruik te maak van standard laboratoriummetodes en is ontleed met behulp van gekalibreerde analitiese instrumente. 'n Aangepaste metode is gebruik om die teenwoordigheid van asbesgevaar in 'n vorm van mineraaltelling te bepaal. Hierdie metode is ook gebruik vir die identifisering van asbes en ander minerale in verskillende stofmonsters met behulp van die XRD tegniek. Die fisiese kenmerke van alle minerale soos die vorm, grootte en tipe is ook bepaal as deel van die karakteriseringsproses met behulp van die SEM-EDS tegniek. Die ASTMD1739:1998 metode het gelei tot 'n hoër retensie van neerslagbare stof, en daarom is gevind dat dit doeltreffender is. Ongelukkig word hierdie metode wat die beste presteer nie deur die regering gewettig of gereguleer nie. Hierdie navorser kom tot die gevolgtrekking dat die redes kan wees as gevolg van die verskillende vorms van die voorruitontwerpe wat dit moeilik kan maak om dit te standaardiseer en te beheer. Hierdie inligtingsgaping bied egter 'n geleentheid tot 'n langer gefokusde studie van hierdie metode met die doel om 'n gestandaardiseerde voorruitontwerp te vind wat aanbeveel kan word vir gebruik in die land.
Tweedens het die eenhede wat beide water en alge-suurwater gehad het, gelei tot 'n hoër neerslagbare stof in Mpumalanga Provinsie. Drie oorskrydings wat in dalende volgorde in Limpopo aangebied is, was 2724 mg/m2/dag op perseel E, 1638 mg/m2/dag op perseel D en 834 mg/m2/dag op perseel B in dieselfde maand van Maart 2017.
Die XRF data van metaaloksiede, met inbegrip van hierdie top drie [Si(IV)O2, Fe2(III)O3 en Al2(III)O3], bevestig die oorheersing van silikaatminerale in oppervlakstofmonsters van beide provinsies. Die XRD mineralogiedata van gefiltreerde, neerslagbare stof toon die oorheersing van die amfibool asbesdeeltjies wat wissel tussen 18 en 56 % in Limpopo Provinsie en 2.0 en 3.0 % in Mpumalanga Provinsie. Daar is ‘n lae teenwoordigheid van serpentynminerale met die hoogste onderskeidelik 2.0 % en 7.0 % in die Limpopo en Mpumalanga Provinsies onderskeidelik. Ongeveer 8.0 tot 43 % van die amfibool asbesminerale is op vasgevangde stof in Limpopo gemeet, tesame met geen opsporing van serpentyn.
Geen asbesminerale is opgespoor in die vasgevangde stof van Mpumalanga nie, ondanks die nabyheid van die ongerehabiliteerde asbesmynhope. Alle asbesvesels in die lug wat op die filtersubstrate vasgelê is, was bo die grenswaarde van 100 f/mL lug. Die hoogste asbesvesel en konsentrasietellings in die lug gemeet, was 40 vesels en 'n konsentrasie van 2.083 f/mL in Oktober op Terrein A. Die volgende hoogste veseltellingkonsentrasie is in Junie gemeet met 6.590 f/mL op die Terrein A en 5.272 f/mL op die Terrein D moniteringsterreine. In Mpumalanga was die hoogste asbesveselkonsentrasie 2.190 f/mL in Junie en 2.083 f/mL in November op Terrein D. Uit ‘n veiligheidsperspektief is alle asbesvesels of minerale wat ingeasem word egter 'n gevaar vir die mens se gesondheid. Die studie het vasgestel dat die aangepaste asbesmineraaltellingmetode daarin geslaag het om die asbesminerale wat in die neerslagbare stofmonsters uit die studiegebiede bestaan te identifiseer en te kwantifiseer. Hierdie uitkoms is suksesvol bekragtig met die toets wat onderneem is met behulp van die amptelik erkende metode vir die telling van asbesvesel. Die aangepaste mineraaltellingmetode bied aan die navorsingsgemeenskap 'n alternatiewe, koste-effektiewe en gebruikersvriendelike ontledingsmetode. Aangesien daar gevind is dat die ASTMD1739:1998 metode beter presteer as die amptelik erkende metode, beveel hierdie studie aan dat die reguleerders van luggehalte in die land dit oorweeg. Maar die metode sal eers verbetering en standaardisering verg, veral die verskillende windskermontwerpe voordat dit amptelik aanvaar kan word as die metode om neerslagbare stof te versamel en te ontleed. Daar word gehoop dat die gemeenskap wat luggehalte navors die uitdaging sal aanpak. / Mabu le dišomišwa tše dingwe tša bothutaswika tše di hwetšagalago bokagodimo ba Lefase di tsebja di e na le diminerale tše dintši tša tlhago tše di diragalago ka tlhago. Marela ke e ngwe ya diminerale tše di nago le dimela tše di ntši kudu tše di bego di epšwa kudu mafelong a mangwe a diphrofentshe "diphrofentsheng tša Limpopo, Mpumalanga le North Cape Afrika Borwa. Le ge go feditšwe go epšwa marela ka lebaka la ditlamorago tše amanago le maphelo a batho ka 2002, go na le pelaelo malebana le go utullwa ga malwetši a marela. Fibre ke ye ngwe ya marela ye e dirilwego ka maekrosekopiki tše dimilione tše di ka senyegago bonolo go tšweletša khemobonolo yeo e hlamago malwetši a mafahla. Sehlodikgolo sa malwetši a marela mafelong a mathomo ao go bego go le meepo ke sekoti sa marela le mabu a ka godimo ga marela. Dikoti tša meepo ya Marela Phrofentsheng ya Limpopo di mpšhafaditšwe ka tsela ye itšego, eupša Phrofentsheng ya Mpumalanga ga se tša mpšhafatšwa gomme mafelo a ka moka a laolwa ke mmušo gobane beng ba tšona ba di tlogetše. Lerole le ka rarollwago ke sešupopele sa tšhilafalo ya moya e dirwago ka moya gomme se be se šomišwa go kgetha mafelo ao a loketšwego go hlokomelwa.
Go ile gwa dirwa tekolo ya go leka tšhomo ya mekgwa ya ASTMD1739: 1998 le ASTM D 1739: 1970. Ge re ntše re tšwela pele ka thuto, go šomišitšwe mokgwa wa semmušo wa ASTM D1739: 1970 gomme wa šomišwa lebakeng la go kgoboketša sampole ya lerole e ka rarollwago. Mafelo a lesome (10) a hweditšwe kgauswi le bodulo ba batho bjo bo lego kotsing ka dikoti tša meepo ya marela di ile tša kgethwa diphrofentsheng tša Mpumalanga le Limpopo ka go latelana. Disampole tša moya tša ka godimo ga lefase, godimo le tše di khutilego di ile tša kgoboketšwa ga tee kgweding kgauswi le bodulo ba batho tše di bego kgauswi kudu le dikoti tša meepo ya marela go tloga ka la 2016 Mopitlo go fihla ka Phupu 2017. Mehuta ya lerole ye sepetšwago ke moya e ile ya kgoboketšwa go šomišwa mokgwa wa semolao wa go tšweletša lerole, E-sampler le sampole ya Air-Con 2. Lerole la ka godimo le be le kgoboketšwa ka ntle go rarela dikarolo tša go kgoboketša lerole go šomišwa poratšhe le pane ya kota gomme le bolokelwa ka mekotleng e nago le zipper ye dirilwego ka polasetiki. Sampole ya lerole le le bego le gaeletšwe le ile la kgoboketšwa ka theipi ya go momela bokagareng le bokantle bja morumofasetere,mabotong a phahlo , le godimo ga galasebokapele dikoloing tša kgale gomme tša bolokwa ka gare ga didirišwa tšeo di makilwego. Disampolo tša mabu a ka godimo di be di hlahlobjwa gape ka mokgwa wa go kgwa ka letsogo ke mohlahlobi wa marela pele go kgoboketšwa.
Disampole di be di lokišitšwe kudu ebile di dirilwe ka tlhoko go efoga tšhilafalo ka mekgwa ye tlwaelegilwego ya laporatori gomme ba e hlahloba ba šomiša didirišwa tša go hlahloba.
Mokgwa o ikgethilego o šomišwa go hwetša bogona ba kotsi ya marela ka mokgwa wa palo ya diminerale. Mokgwa wo o be o šomišitšwe gape le go bošupong ba marela le diminerale tše dingwe ka gare ga disampole tše di fapanego tša lerole go šomišwa mokgwa wa XRD. Dibepegopono tša diminerale ka moka go swana le sebopego, bogolo le mohuta le tšona di be di tšewa e le karolo ya tshepetšo ya pharodipataka go bogolo le mohuta le tšona di be di tšewa e le karolo ya tshepetšo ya pharodipataka go šomišwa mokgwa wa SEM-EDS.
Mokgwa wa ASTMD1739: 1998 o ile wa dira gore go bolokwe lerole le phagameng ka go fetolegago, ka gona go hweditšwe gore le šoma gabotse kudu. Ka bomadimabe, mokgwa wo o tšweletši kudu ge o ngwadišwa ke molao go mmušo. Monyakišiši wo o phetha ka gore mabaka e ka ba ka lebaka la dibopego tše di fapaneng tša meralo ya setsi sa moya se se ka dirago gore go be boima go tseba le go laola. Le ge go le bjalo, sekgoba se sa tshedimošo se fa monyetla wa go ithuta nepišo e telele ya maikemišetšo a go hwetša moralo o tiišitšwego wa moya o ka šišinywago gore o šomišwe ka nageng.
Ya bobedi, diyuniti tše di bego di e na le meetsi le algaecide di ile tša tšweletša maemo a phagamego Mpumalanga Phrofentsheng. Ditekanyetšo tše tharo tše di tšweleditše ka tatelano ya taolo e fokotšegago e be e le 2724 mg/ m2/ letšatši go Site E, 1638 mg / m2/ letšatši go Site D le 834 mg/ m2/ letšatši go Site B kgweding ye tee ya Hlakola 2017 Dintlha tša XRF tša di-oxide tša tšhipi, go akaretša tše tše tharo tša godimo [Si (IV) O2, Fe2 (III) O3 le Al2 (III) O3], di tiiša boleng bo phagameng ba diminerale tša silrate mehuteng ya lerole ye e tšwago diphrofentsheng ka bobedi. Dintlha tša XRD tša mineralogy tše di tšwago leroleng le tšhilafatšong di ka tšewa di bontšha phelo ya marela ya amphibole go tloga go 18 go iša go 56% phrofentsheng ya Limpopo le 2.0 go iša go 3.0% phrofentsheng ya Mpumalanga. Bogonatlase ba diminerale tša serpentine tše phagameng ka go fetišiša e le 2.0% le 7.0% diphrofentsheng tša Limpopo le Mpumalanga ka go latelana. Go lekana 8.0 go iša go 43% ya diminerale tša marela tše lekantšwego di ile tša lekanywa leroleng le ageeletšwego ka Limpopo gammogo le go utullwa ga serpentine.
Ga go na diminerale tša marela tše di hweditšwego leroleng le ageeletšwego le tšwago Mpumalanga, le ge e le kgauswi kgauswi le dikoti tša mope wa maraba wa marela se a mpšhafatšwago. Mehuta ka moka ya moya ya marela ye e bego e swerwe ka gare ga moya o bego o Mehuta ka moka ya moya ya marela ye e bego e swerwe ka gare ga moya o bego o le ka godimo wa boleng ba moya wa 100 f /mL. Mohuta o phagamego go fetišiša wa moya wa marela le dipalo tša mahlorišo a lekantšwego e be e le tše 40 le bogolo ba 2.083 f /mL ka Diphalane go Site A. Tekanyomahloriš e latelago ya fiber e lekantšwe Phupu ka 6.590 f /mL go Site A le 5.272 f /mL Site D mafelong a tlhahlobo. Nageng ya Mpumalanga, di-fibre tša marela tše phagamego ka go fetišiša e be e le 2.190 f / mL ka Phupu le 2.083 f /mL ka Dibatsela go Site D. Le ge go le bjalo, go latela ponego ya tšhireletšo, fibre ka moka tša marela goba diminerale tše di hengwago di kotsi maphelong a botho. Boithuto bo bo utullotše gore mokgwa wo lekantšwego wa marela o bontšhitšwegošupo o atlegile go kgetholla le go hlakola diminerale tša marela tše di bego di le gona ka gare ga disampolo tša lerole le tšwago mafelong a boithuto. Sephetho se se netefaditšwe katlego le tlhahlobo ye e dirilwego e šomišwago mokgwa wo amogetšwego ke molao wa marela fiber. Mokgwa o lekantšwego wa diminerale o thuša setšhaba sa dinyakišišo ka mokgwa o mongwe wa tlhahlobo ye e šongwago, gabotse e bile ye botho. Go tloga go mokgwa wa ASTM D1739: 1998 o hweditšwe o šoma gabotse go feta mokgwa wo amogetšwego ke molao, thuto ye e šupetša gore balaodi ba boleng ba moya nageng ba e nagane. Empa, mokgwa wo o tla hloka mpšhafatšo le maemo pele kudu meralo ye fapaneng ya thebe ya moya pele e ka amogelwa ke molao e le mokgwa wa go kgoboketša le go sekaseka lerole le le ka rarolwago. Re tshepa gore setšhaba sa dinyakišišo tša boleng ba moya se tla tšea bothata bo. / Mobu le lisebelisoa tse ling tsa jioloji tse fumanehang bokaholimo ba Lefatše li tsejoa li na le liminerale tse ngata tsa tlhaho tse etsahalang ka tlhaho. Asbestos ke e 'ngoe ea liminerale tse nang le silika e ngata e neng e chekoa haholo libakeng tse ling tsa liprofinse tsa "liprofinse tsa Limpopo, Mpumalanga le North Cape Afrika Boroa. Leha ho felisoa morafo oa asbestos ka lebaka la litlamorao tse amanang le bophelo bo botle ba batho ka 2002, ho ntse ho na le ts'oenyeho mabapi le ho pepesetsoa ha tikoloho likhoele tsa asbestos. Fiber e le 'ngoe ea asbestos e entsoe ka likhoele tse limilione tse kang nale tse tsoang habonolo ho hlahisa likaroloana tse sa bonoeng tse tlalehang libaka-mafuamatšo. Mohloli o ka sehloohong oa likhoele tsa asbestos libakeng tseo pele e neng e le tsa meepo ke lithako tsa asbestos le mobu o silafetseng oa asbestos. Likotlo tsa merafo ea Asbestos Profinseng ea Limpopo li nchafalitsoe ka tsela e itseng, athe Profinseng ea Mpumalanga ha e nchafatsoe 'me libaka tsena kaofela li laoloa ke mmuso hobane beng ba tsona ba ba lahlile. Lerōle le ka rarolloang ke letšoao la pele la tšilafalo ea moea e tsoang ka moea mme le ne le sebelisetsoa ho khetha libaka tseo li lokelang ho-shebelloa. Ho ile ha etsoa boithuto ba ho leka ts'ebetso ea mekhoa ea ASTMD1739: 1998 le ASTM D 1739: 1970. Ha re ntse re tsoela pele ka thuto, ho sebelisitsoe mokhoa oa semmuso oa ASTM D1739: 1970 'me oa sebelisoa bakeng sa ho bokella sampole ea lerōle e ka rarolloang. Sebaka sa libaka tse leshome (10) tse fumanehang haufi le bolulo ba batho ba tlokotsing tse haufi le libaka tse lahliloeng tsa meepo ea asbestos li ile tsa khethoa liprofinseng tsa Mpumalanga le Limpopo ka ho latellana. Lisampole tsa moea tse ka holim'a lefatše, holimo le tse patiloeng li ile tsa bokelloa hang ka khoeli ho potoloha libaka tsa bolulo tsa batho tse haufi haholo le libaka tse lahliloeng tsa moepo oa asbestos ho tloha ka Mmesa 2016 ho fihlela ka Phuptjane 2017. Mefuta ea lerōle e tsamaisoang ke moea e ile ea bokelloa ho sebelisoa mokhoa oa semolao oa ho hlahisa lerōle, E-sampler le sampole ea Air-Con 2. Lerōle le kaholimo le ne le bokelloa ka ntle ho potoloha likarolo tsa ho bokella lerōle le sebelisa brashi le pane ea patsi mme le bolokiloe ka mekotleng e nang le zipper e entsoeng ka thepa ea polasetiki. Mehlala ea lerōle e neng e tšoasehile e ile ea bokelloa ho sebelisoa theipi e khangoang ka tlung le kantle kahare ho lifensetere, ka holim'a thepa ea ka tlung le lifensetereng tsa likoloi tsa khale 'me li bolokiloe ka har'a lisebelisoa tse koetsoeng. Meetso ea mobu e kaholimo le eona e ile ea hlahlojoa ka letsoho le ts'oaroang ka asbestos pele ho pokello. Mehlala e ne e hlophisitsoe haholo ebile e entsoe ka hloko ho qoba ho silafatsa kapa ho fokotsa tšilafalo ea tšebeliso ea mekhoa e tloaelehileng ea laboratori mme e ile ea hlahlojoa ho sebelisoa lisebelisoa tsa tekanyetso. Mokhoa o ikhethileng o sebelisitsoe ho fumana ho ba teng ha kotsi ea asbestos ka mokhoa oa palo ea liminerale. Mokhoa ona o ne o boetse o sebelisoa bakeng sa ho khetholla asbestos le liminerale tse ling ka har'a disampole tse fapaneng tsa lerōle ho sebelisoa mokhoa oa XRD. Litšobotsi tsa 'mele tsa liminerale tsohle tse kang sebopeho, boholo le mofuta le tsona li ne li nkuoa e le karolo ea ts'ebetso ea sebopeho ho sebelisa mokhoa oa SEM-EDS. Mokhoa oa ASTMD1739: 1998 o ile oa etsa hore ho bolokoe lerōle le phahameng ka ho fetelletseng, ka hona ho fumanoe hore le sebetsa hantle haholo. Ka bomalimabe, mokhoa ona o atlehileng ka ho fetisisa ha o ngolisoe ke molao kapa 'muso. Mofuputsi enoa o phethela ka hore mabaka a ka ba teng ka lebaka la sebopeho se fapaneng sa meralo ea setsi sa moea se ka etsang hore ho be thata ho tseba le ho laola. Leha ho le joalo, lekhalo lena la tlhaiso-leseling le fana ka monyetla oa ho ithuta ho tsepameng molemong oa mokhoa ona ka sepheo sa ho fumana moralo o tiisitsoeng oa moea o ka khothalletsoang hore o sebelisoe ka har'a naha. Ya bobedi, diyuniti tse neng di na le metsi le algaecide li ile tsa hlahisa maemo a phahameng a ho tsetsahala Mpumalanga. Litekanyetso tse tharo tse fanoeng ka tatellano ea taolo e fokotsehang e ne e le 2724 mg/ m2/ letsatsi ho Site E, 1638 mg /m2/ letsatsi ho Site D le 834 mg / m2/letsatsi ho Site B ka khoeli e tšoanang ea Hlakubele 2017. Lintlha tsa XRF tsa li-oxide tsa tšepe, ho kenyelletsa tsena tse tharo tse holimo [Si (IV) O2, Fe2 (III) O3 le Al2 (III) O3], li tiisa boleng bo phahameng ba liminerale tsa silrate mefuteng ea lerōle e tsoang liprofinseng ka bobeli. Lintlha tsa XRD tsa mineralogy tse tsoang lerōleng le ts'ilafatsoang li ka nkuoa li bonts'a phello ea asbestos ea amphibole ho tloha ho 18 ho isa ho 56% profinseng ea Limpopo le 2.0 ho isa ho 3.0% profinseng ea Mpumalanga. Boteng bo tlase ba liminerale tsa linoha tse phahameng ka ho fetisisa e le 2.0% le 7.0% liprofinseng tsa Limpopo le Mpumalanga ka ho latellana. Hoo e ka lerōleng le ts'oaroang ho la Limpopo hammoho le ho sibolloa ha noha. Ha ho na liminerale tsa asbestos tse fumanoeng lerōleng le tsubelletsoeng le tsoang Mpumalanga, leha ho le haufi le marang-rang a litopo tsa asbestos tse sa ntlafatsoang.
Mefuta eohle ea moea e kang asbestos e neng e hapiloe kahare ho moea o ne o le kaholimo ho boleng ba moea oa 100 f /mL. Mofuta o phahameng ka ho fetisisa oa moea oa asbestos le lipalo tsa mahloriso tse lekantsoeng e ne e le likhoele tse 40 le boholo ba 2.083 f /mL ka Mphalane ho Site A. Khakanyo e latelang ea fiber fiber e latelang e lekantsoe ka Pherekhong ka 6.590 f /mL ho Site A le 5.272 f /mL setsing D libaka tsa tlhahlobo. Naheng ea Mpumalanga, li-fiber tsa asbestos tse phahameng ka ho fetisisa e ne e le 2.190 f /mL ka Phuptjane le 2.083 f /mL ka Pulungoana ho Site D. Leha ho le joalo, ho latela pono ea ts'ireletso, likhoele tsohle tsa asbestos kapa liminerale tse kentsoeng li kotsi bophelong ba motho. Boithuto bo fumane hore mokhoa o lekantsoeng oa "asbestos" o ntlafalitsoeng o atlehile ho tseba le ho hlakisa liminerale tsa asbestos tse neng li le teng ka har'a mehlala ea lerōle e tsoang libakeng tsa boithuto. Sephetho sena se netefalitsoe ka katleho le tlhahlobo e entsoeng e sebelisang mokhoa o amohetsoeng ka molao oa asbestos fiber count. Mokhoa o lekantsoeng oa liminerale o thusa sechaba sa lipatlisiso ka mokhoa o mong oa tlhahlobo o sebetsang, o sebetsang hantle ebile o sebelisang botsoalle. Ho tloha ha mokhoa oa ASTM D1739: 1998 o fumanoe o sebetsa hantle ho feta mokhoa o amohetsoeng ka molao, thuto ena e khothaletsa hore batsamaisi ba boleng ba moea naheng ba e nahane. Empa, mokhoa ona o tla hloka ntlafatso le maemo pele haholo mealo e fapaneng ea thebe ea moea pele e ka amoheloa ka molao e le mokhoa oa ho bokella le ho sekaseka lerōle le ka rarolloang. Re tšepa hore sechaba sa lipatlisiso tsa boleng ba moea se tla nka bothata bona. / Environmental Science / Ph. D. (Environmental Sciences)
|
Page generated in 0.0818 seconds