The subject of the diploma thesis is the bridging design of the valley and Doľanský potok on the D1 motorway in the section Jánovce - Jablonov in Slovakia. Three variants of bridging have been designed and then compared. A post-tensioned construction of the box girder cross section was chosen as the most suitable variant, which was further checked. The static calculation was drawn up according to European standards.

The thesis deals with design and static assessment of the steel railway bridge with a span 36,6 m. The bridge is located on the two-track corridor line Košice - Púchov. It consists of two bridge structures connected by a longitudinal expansion joint. The main construction consists of four solid welded beams mounted on steel calotte bearings. The bridge deck is the top with a tub for the track bed, which is continuous at the site of the bridge. Bridging the bridge is secured by a track bed and a horizontal and lateral truss bracing. On both sides of the bridge are pedestrian walkways with a width of 1,5 m.

The topic of this thesis is detailed design of the supporting structure of a bridge. The final design is chosen out of three variants. It is a single beam structure consisting of 6 spans. The supporting structure is prestressed concrete with post-tensioning technology, the impact of phased construction is considered. the subject of the expertise of the structure is ultimate limit state, as well as service limit state, designed according to the code. The thesis also contains drawings, visualization and Engineering Report of the structure.

Diploma thesis is focused on a design of the road bridge of the category S7,5 in cadastral territory of a municipality Polanka nad Odrou. Three preliminary studies have been proposed. Box girder beam with a slant walls were selected for more detailed processing. Construction of the bridge is going to be build by time-dependent analysis on a solid formwork. The calculation of load is done by using computer software Midas Civil 19 v 2.1. and Scia Engineer 19.1. Selected preliminary was assessed according to the recent Europan standards.

The topic o thlis thesis is design of the structure of a bridge. The beam structure is chosen from three variants of the solution, the structure is formed by a bracket above the pillars and prepared prestressed beams. Various construction procedures have been verified and assessed for the serviceability and load-bearing limit states according to the applicable standards and regulations. Drawing documentation and static calculation are processed.

The final thesis is focused on design of valley bridging on I/38 road at the Havlickuv Brod bypass. The thesis contains study of the bridging area. For detailed assessment was chosen, from three variants, a two-beam cross-section girder of 4 spans. Load-bearing structure is designed as cast-in-place, post-tensioned, concreted at fixed falsework without phased construction. The serviceability limit state and the ultimate limit state were assessed. The thesis contains, apart from structural design, drawings and visualizations of the bridge.

This thesis focuses on design and assessment of load-bearing construction of a bridge over Jevišovka river at road I/53 near Lechovice. The bridge was designed as a trapezoidal cross-section slab. This solution was chosen from three sketch eventualities. The work includes an implementing engineering report, construction process report and report about static-analysis, the attachments include the sketch, vizualization, drawings, component drawing, construction process and the static-analysis of this structure. Computing of internal forces was performed by computational software Scia Engineer 17.

The diploma thesis deals with the design of a bridge in Most. It bridges the railway line and the river Bílina. Three possible variants have been proposed. One of the variants has been selected and further elaborated. The solved variant was an arc with a suspended pre-stressed bridge beam. The supporting element is a reinforced concrete backbone. The construction is built on a ring. Static analysis partly includes the effect of phased construction. The design was assessed according to EN.

The thesis deals about method of gain signals from strain gauge bridges. There are mentioned some signal conditioning methods for bridges amplifiers and charactered their properties. In the next part of this thesis are calculated the amplifier errors for various temperature. There are projected individual variants of strain gage amplifiers (instrumentation amplifier AD524, isolation amplifier, switched capacitor based instrumentation amplifier), their properties are compared with strain gage amplifier Vishay P-3500.

This work is aimed at the problems of finding and selecting employees through the application of the latest knowledge and approach of staff selection. From the knowledge gained it suggests a possible method of choosing employees in the company, ABC Ltd. for the position of a dealer.