1 |
Energy savings in multi-family building after using an innovative retrofitting packageKasolas, Kosmas January 2020 (has links)
The building sector is one of the sectors that consume the most energy in Sweden. In order to deal with this problem Swedish government aims to reduce the energy consumption in the building sector 50% by 2050. Another ambitious goal set by the Swedish government is zero greenhouse gas emissions by 2040. Most of the buildings in Sweden were built during 1950-1990 before the first energy regulations were voted in Europe. A high percentage of these buildings date to 1950 and the majority of them are multi family buildings. Apartments built during this period are now requiring major renovation and retrofitting measures in order to comply with the energy and indoor environment regulations. Despite the urgent need for retrofitting expressed above, the retrofitting ratio in Sweden was 0.88% in 2013, so the number of buildings that haven’t gone through any energy retrofitting is still high making it clear that the biggest opportunity for energy savings lies within the existing building stock and that the retrofitting ratio has to enhance in order to achieve the governments energy and emission goals for 2050. In this study a new patented innovative energy retrofitting method is studied within IDAICE simulation program in order to find the heat load and the energy savings after applying this method. The simulated building is a three story multi family building with building characteristics from 1950 and the simulation takes place in two different climate zones (Stockholm and Umeå). Three different insulation thicknesses were tested creating three different variant cases in order to investigate the difference in energy savings an increase of the insulation thickness will bring. This retrofitting method except installation of extra facade insulation includes roof insulation, replacement of the air handling unit with heat recovery ventilation whose pipe system runs through the insulation behind the radiators of each zone and replacement of the old windows with triple glazed low U-value windows. The results show a high reduction in heat supplied after the retrofit, 66.4% room unit heat reduction in Stockholm and 59.6% in Umeå and even higher energy reduction 68.3% in Stockholm and 68.9% in Umeå. The CO2 emission reduction was 58.4% in Stockholm and 60.9% in Umeå. The difference in room unit heat, energy consumption and CO2 emissions among the Variant cases varies between 1-2%. The explanation for such a small difference lies in the fact that the only difference among these cases is the insulation thickness of the facade. The thermal comfort was also investigated and has shown an increase in hours of dissatisfaction after the retrofitting and as the insulation increased due to overheating. However it must be stated here that the reason behind the increase in dissatisfaction is that no window shading or window opening schedules were taken into account in the simulation maximizing the solar heat gains of the building. The study concludes that the studied retrofitting method is very efficient and the studied building achieves higher energy reduction than the goal that the Swedish government has set for 2050. The results of this study bring this retrofitting method ahead of the 2050 energy reduction goals set by the Swedish government with significant reductions in CO2 emissions and heat load.
|
2 |
Factores de importancia para el diseño de aisladores sísmicos para una edificación multifamiliar de concreto armado con diferentes alturas en Lima, Perú / Important factors for the design of seismic isolators for a multi-family reinforced concrete building with different heights in peruMeza Gallegos, Luis Alexander, Quintanilla Gallegos, Mauricio Sebastián 19 August 2021 (has links)
En muchos países sufren bastantes movimientos sísmicos, que en algunos casos de severa intensidad, que han ocasionado pérdidas de vidas humanas, económicas. Por ello, se realiza el diseño de edificaciones para soportar sismo de gran intensidad y que el comportamiento de la estructura sea inelástico, para que no pueda colapsar y permita la evacuación de las personas. Ante esta situación, la estructura queda severamente dañada y el costo de reparación es alto. En las últimas décadas, se ha generado sistemas de protecciones sísmicas, lo que engloba un amplio estudio de variedades y tipos de investigaciones. Uno de los temas más estudiados son los sistemas de aisladores sísmicos, ya que separa la superestructura del suelo, es decir que los desplazamientos y aceleraciones de la estructura y del suelo son diferentes.
En este estudio se propone el uso del sistema de aisladores sísmicos, con el uso del aislador elastomérico con núcleo de plomo (Lead Rubber Bearing, siglas en ingles LRB), se hace el diseño del aislador de un edificio de concreto armado de diferentes alturas (6, 8 y 10 pisos) con 4 normas de diferentes países (NTP E.031, NCh 2745, ASCE 7-16 y NZS 1170.5). Para poder identificar los factores de mayor importancia en un diseño de aislador.
Finalmente, se realiza la comparación de las derivas, desplazamientos y aceleraciones. / In many countries they suffer quite a few seismic movements, which in some cases of severe intensity, that have caused loss of human lives, economic losses. For this reason, buildings are designed to withstand high-intensity earthquakes and the behavior of the structure is inelastic, so that it cannot collapse and allows the evacuation of people. In this situation, the structure is severely damaged and the cost of repair is high. In the last decades, systems of seismic protection have been generated, which includes a wide study of varieties and types of investigations. One of the most studied subjects is the systems of seismic isolators, since it separates the superstructure from the soil, that is to say, the displacements and accelerations of the structure and the soil are different.
In this study, the use of the seismic isolator system is proposed, with the use of the elastomeric lead rubber bearing (LRB), the isolator design of a reinforced concrete building of different heights (6, 8 and 10 floors) with 4 standards from different countries (NTP E.031, NCh 2745, ASCE 7-16 and NZS 1170.5). In order to identify the most important factors in an insulator design.
Finally, the comparison of drifts, displacements and accelerations is made. / Tesis
|
3 |
Uso de Aisladores Sísmicos Para Edificios Multifamiliares. Caso De Estudio: Edificio Multifamiliar Residencial HungríaFernández Loayza, Jannet, Quispe Vilca, Albert Dante, Vargas Salazar, Raúl Daniel, Lucero Rojas, Katherine Reyna, Alva Jiménez, Alfonso Renato 26 October 2020 (has links)
Nuestro proyecto busca demostrar que se puede mejorar el desempeño sísmico de las edificaciones empleando aisladores sin afectar la rentabilidad del proyecto.
Para ello, se evaluó aplicarlo en el proyecto “Residencial Hungría” el cual se trata de un edificio multifamiliar de 12 departamentos y 10 estacionamientos distribuidos en 4 pisos y un semisótano respectivamente.
Se modifico la configuración original del proyecto y se incluyó un sistema de aisladores de base con núcleo de plomo con el fin de comparar la rentabilidad entre ambos proyectos (Original y modificado con aisladores).
Los resultados obtenidos en la primera etapa muestran que ante un número reducido de pisos (04 pisos) la rentabilidad del proyecto modificado con aisladores es menor a la original, sin embargo, luego de evaluar múltiples opciones, se obtuvo que a partir de 07 pisos tiene un VAN de S/ 172,077 un TIR de 24 % mayor al COK que es de 20%.
Sabemos que en la Filosofía y Principios del Diseño Sismorresistente contenidos en la Norma E.030 del Reglamento Nacional de Edificaciones se reconoce que dar protección completa frente a todos los sismos no es técnica ni económicamente factible para la mayoría de las estructuras, es por ello por lo que el uso de los aisladores está enfocado principalmente a estructuras del sector salud y educación.
Con esto proyecto queremos propiciar la aplicación de aisladores a más proyectos de edificaciones y viviendas multifamiliares, verificando que, si puede ser rentable económicamente para el constructor, lo cual beneficiaría la demanda desatendida de la población que requiere una vivienda más segura y con mejor desempeño ante un sismo, y que minimice los costos de reparación, muertes y damnificados ante un eventual movimiento sísmico de alto impacto aun teniendo que invertir un porcentaje adicional en la compra del inmueble. / This research demonstrate that the seismic performance of buildings can be improved by using isolators without affecting the profitability of the project.
For this, it was evaluated in the "Residential Hungria" project, which is a multifamily building with 12 apartments and 10 parking spaces distributed in 4 floors and a semi- basement, respectively.
The original configuration of the project was modified and a system of base insulators with lead core was included in order to compare the profitability between both projects (Original and modified with insulators).
The results obtained in the first stage show that with a reduced number of floors (04 floors) the profitability of the project modified with insulators is lower than the original one, however, after evaluating multiple options, it was obtained that from 07 floors it have a NPV of S / 172,077 an IIR of 24% higher than the COK which is 20%.
We know the Philosophy and Principles of Earthquake Resistant Design contained in Standard E.030 of the National Building Regulations, it is recognized that providing complete protection against all earthquakes is not technically or economically feasible for most structures, which is why isolators is mainly focused on structures in the health and education sectors.
With this project we want to promote the application of insulators to more projects of buildings and multifamily housing, verifying that, it can be economically profitable for the builder, which would benefit the unattended demand of the population that requires a anti seismic building prepared for an earthquake, minimizes repair costs, deaths and victims in eventual high-impact seismic movement even having to invest an additional percentage in the purchase of the property. / Trabajo de investigación
|
4 |
Climate and economic implications of structure and façade materials on a building's life cycle performance : A case study of a multi-family building in SwedenJatzkowski, Maximilian January 2023 (has links)
This study has been conducted in cooperation with OBOS Kärnhem. The objective of the study is to assess environmental impacts from different structural and facade materials to find a configuration with the lowest impact, and to assess the economic implications of different structural and façade materials. The study is conducted on a case study building planned in Linköping, Sweden. The methods that were used are the life cycle assessment (LCA) and life cycle cost (LCC) methods. Cross-laminated timber and concrete were chosen as the 2 structural materials to investigate, and sheet metal, cut slate, and wood paneling were chosen as the façade materials to investigate. The goal and scope were specified. The goal of the LCA was to analyze the climate implications of different structural and facade materials on a building’s environmental performance, while the scope was to compare the environmental impacts, specifically global warming potential, of six scenarios over a lifetime of 80 years. Later, a life cycle inventory of the materials was conducted, and the life cycle inventory was assessed. Finally, the life cycle interpretation was carried out to analyze and interpret the results. For the LCC, costs were calculated for materials and energy use and applied to the case study building. The analyses of results show that the wooden building scenarios have significantly low environmental impacts when compared with concrete buildings. The analyses of the results also show that the buildings constructed with cast-in-situ concrete have lower life cycle costs when compared with buildings constructed with cross-laminated timber. This study concludes that structural material choices affect the environmental performance of a building significantly. Facade material choices also affect the environmental performance, however much less significantly. This study also shows that, within these specific system boundaries, the most impactful life cycle stage for the wood structure building scenarios is the operational phase B6, while the most impactful life cycle stage for the concrete structure building scenarios is the material production stage A1-A3. This study further concludes that while cross-laminated timber buildings have a lower carbon footprint than concrete structure buildings, they currently cost significantly more to build. This highlights the discrepancies between the changes and choices that are required to reach the climate and sustainable development goals, and what is economically viable.
|
Page generated in 0.1448 seconds