No / In this work we have studied the performance of MIMO-DWT based multicarrier system using the feedback circuit from the receiver to the transmitter to understand the channel state information (CSI) and to create a steering matrix in order to constructively combine the received signal at the receiver which provides the advantage of keeping the burden of processing at the transmitter which has more power and less constraints.

No description available.

Orthogonal Frequency Division Multiplexing (OFDM) has recently gained a lot of attention and is a potential candidate for Fourth Generation (4G) wireless systems because it promises data rates up to 10Mbps. A variation of OFDM is Multi-Carrier CDMA (MC-CDMA) which is an OFDM technique where the individual data symbols are spread using a spreading code in the frequency domain. The spreading code associated with MC-CDMA provides multiple access technique as well as interference suppression. Often times in cellular and military environments the desired signal can be buried below interference. In such conditions, the processing gain associated with the spreading cannot provide the needed interference suppression. This research work investigates multi-antenna receivers for OFDM and MC-CDMA systems; specifically this works investigates adaptive antenna algorithms for MC-CDMA for very different channel conditions. Frequency domain beamforming is studied in this research predominantly through simulation. As an alternative a time domain beamforming is also studied. Time variations in the channel can disrupt the orthogonality between subcarriers. Minimum Mean Square Error (MMSE) detection coupled with MMSE beamforming is proposed for time varying channels. Semi-analytic results are derived to study the Bit Error Rate (BER) performance. These results show significant performance improvement in the presence of interference. Joint MMSE weights in space and frequency is also investigated and semi-analytic results are derived to study their BER performance. / Master of Science

This thesis on multicarrier effects in the magnetotransport and optical properties of Mercury Cadmium Telluride (MCT or HgCdTe) covers mainly: design, construction and calibration of a 12T 4K and 19T 77K pulsed high magnetic field systems; temperature dependent magnetotransport measurements upto 15T performed on the home-built pulsed magnet systems; computational techniques developed to extract densities and mobilities of various carriers, especially low mobility heavy holes, participating in conduction; theoretical analysis of heavy hole mobility based on Boltzmann transport equation; temperature dependent optical absorption experiments in the Mid and Far-IR on bulk and thin film samples; and theoretical modelling of optical absorption below bandgap. The work essentially probes the low and high frequency conductivity of the semiconductor alloy Hg1?xCdxTe by performing microscopic calculations of scattering related phenomena of its free carriers at higher temperatures (200 K–300 K) and comparing with experimental data. Special attention is given to properties of heavy holes as the effects due to these carriers appear only at higher magnetic fields. It is demonstrated that in this temperature range and at high magnetic fields, taking both measured resistivity and derived conductivity in the multicarrier analysis gives better results which are then applied to explain both heavy hole mobility as well as free carrier absorption without further fitting parameters and using a minimal set of necessary intrinsic properties. The agreement thus obtained with experimental data is shown to be excellent. The bulk and epilayer samples used in this thesis were grown by the MCT group headed by R. K. Sharma (SSPL, Delhi). The organization of the thesis is as follows: Chapter 1 The importance of Mercury Cadmium Telluride as a narrow gap semiconductor for infrared detection is introduced. The relevant physical and material properties of HgCdTe are reviewed. Chapter 2 A low cost 12T pulsed magnet system has been integrated with a closed-cycle Helium refrigerator (CCR) for performing magnetotransport measurements. Minimal delay between pulses and AC current excitation with software lock-in to reduce noise enable quick but accurate measurements to be performed at temperatures 4K-300K upto 12T. An additional pulsed magnet operating with a liquid nitrogen cryostat extends the range upto 19T. The instrument has been calibrated against a commercial superconducting magnet by comparing quantum Hall effect data in a p-channel SiGe/Si heterostructure and common issues arising out of pulsed magnet usage have been addressed. The versatility of the system is demonstrated through magnetotransport measurements in a variety of samples such as heterostructures, narrow gap semiconductors and those exhibiting giant magnetoresistance. Chapter 3 The necessity of employing multicarrier methods in magnetotransport of narrow gap semiconductors is brought out. In these materials, mixed conduction is seen to exist at nearly all temperatures of interest. Methods of extracting two of the most important transport parameters of device interest, density and mobility, from the variable magnetic field Hall and magnetoresistance measurements are elaborated. Improvements have been made to the conventional non-linear least squares fitting procedure and are demonstrated. Chapter 4 Magnetotransport measurements in pulsed fields upto 15 Tesla have been performed on Mercury Cadmium Telluride (Hg1?xCdxTe, x?0.2) bulk as well as liquid phase epitaxially grown samples to obtain the resistivity and conductivity tensors in the temperature range 220K to 300 K. Mobilities and densities of various carriers participating in conduction have been extracted using both conventional multicarrier fitting (MCF) and Mobility Spectrum Analysis(MSA). The fits to experimental data, particularly at the highest magnetic fields, were substantially improved when MCF is applied to minimize errors simultaneously on both resistivity and conductivity tensors. The semiclassical Boltzmann Transport Equation (BTE) has been solved without using adjustable parameters by incorporating the following scattering mechanisms to fit the mobility: ionized impurity, polar and nonpolar optical phonon, acoustic deformation potential and alloy disorder. Compared to previous estimates based on the relaxation time approximation with out-scattering only, polar optical scattering and ionized impurity scattering limited mobilities are shown to be larger due to the correct incorporation of the in-scattering term taking into account the overlap integrals in the valence band. Chapter 5 Optical absorption measurements have been performed on bulk Mercury Cadmium Telluride (Hg1?xCdxTe, x?0.2) samples between 4K and 300 K. After fitting the Urbach part of the spectrum in the mid-infrared, below bandgap absorption is modeled using only basic processes and mechanisms, i.e. intervalence transitions and free carrier absorption (FCA). The additive FCA coefficients for individual carriers have been calculated using known quantum mechanically derived expressions for scattering due to polar and nonpolar optical phonons, ionized impurities and acoustic deformation potential mechanisms found to be relevant for electrical transport in this temperature range. The densities of carriers used in the calculations are derived from a modified multicarrier fitting (MCF) procedure on both resistivity and conductivity tensors from magnetotransport measurements in pulsed fields upto 15 Tesla from 220K to 300 K, thus making hole density more reliable. It is found that such a treatment is sufficient to model the absorption spectra below bandgap quite accurately without introducing any additional mechanical or compositional defect related phenomena. Chapter 6 A summary of the work carried out in this thesis is presented. Some future directions including preliminary work to measure carrier mobilities at high electric fields and effect of hydrogen passivation in MCT are briefly discussed.

International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada / This paper presents a mathematical model for Coded Orthogonal Frequency Division Multiplexing (COFDM) in frequency selective multipath encountered in aeronautical telemetry. The use of the fast Fourier transform (FFT) for modulation and demodulation is reviewed. Error control coding with interleaving in frequency is able to provide reliable data communications during frequency selective multipath fade events. Simulations demonstrate QPSK mapped COFDM performs well in a multipath fading environment with parameters typically encountered in aeronautical telemetry.

In this thesis, new precoding and equalization techniques for multicarrier systems were proposed and analyzed.First, the error performance of precoded filterbank multicarrier (FBMC) systems was analyzed. It was found out that this performance is highly sensitive to complete subchannel equalization. When there is residual intersymbol interference (ISI) stemming from imperfect subchannel equalization there is a loss of diversity; this loss can be prevented with the adoption of a number of subchannels large enough so that each subchannel suffers flat fading or with the utilization of a subchannel equalizer with sufficient length to compensate the subchannel frequency response.After that, an approximation for the signal to interference-plus-noise ratio (SINR) distribution of SC-FDE systems using linear MMSE equalization was proposed. This approximation uses the lognormal distribution with the smallest Kullback-Leibler distance to the true distribution, and was shown to be precise in the error performance sense; it serves as a system abstraction. With this abstraction, a precise method to obtain the analytical coded error performance of these systems was proposed.Finally, widely linear Tomlinson-Harashima precoders and equalizers (linear and decision-feedback) for SC-FDE systems were proposed. These precoders and equalizers have better error performance when compared to their strictly linear versions if signals coming from an improper constellation are transmitted. Their error performance when decision-feedback equalizers are used is less sensitive to the length of the feedback filter. When widely linear precoders are used, this error performance becomes less sensitive to channel estimation errors.

Avec la multiplication des terminaux mobiles et le foisonnement des objets dits « connectés », on assiste à la montée d'un besoin de moyens de communication à tout endroit et en toute situation, accompagné d'un encombrement spectral toujours plus important. Dans ce contexte, si la capacité d'adaptation au canal des modulations multiporteuses permet de bien s'accommoder du besoin de communication en tout endroit, les techniques actuelles, en particulier l'OFDM, souffrent d'une mauvaise localisation fréquentielle et d'un mauvais facteur de crête, ce qui limite leur utilisation dans un contexte embarqué et/ou en présence de fortes contraintes spectrales. Dans cette thèse, nous étudions les modulations multiporteuses au-delà de la cadence de Nyquist. En augmentant la densité de signalisation, ces dernières permettent d'augmenter l'efficacité spectrale. Cela est cependant contrebalancé par l'apparition d'auto-interférence, ce qui rend la réception plus délicate.Sur canal à bruit additif blanc gaussien, on montre comment choisir des impulsions de mise en forme maximisant le rapport signal à interférence plus bruit. On montre que ces dernières permettent d'obtenir une turbo-égalisation linéaire de l'auto-interférence minimisant l'erreur quadratique moyenne. Nos travaux mettent en évidence que ces mêmes impulsions permettent également de réduire le facteur de crête à mesure que la densité augmente. Enfin, sur canal sélectif en fréquence, on vérifie que l'approximation du canal par un coefficient par sous-porteuse est toujours possible. Ces résultats montrent que ce nouveau type de modulation permet d'augmenter l'efficacité spectrale tout en conservant la capacité d'adaptation au canal intrinsèque aux modulations multiporteuses. / With an increasing number of mobile terminals coupled with a large spreading of so-called "smart devices", we can see a growing demand for effective communication means in any place and in any situation.This goes with a more and more overcrowded spectrum.In this context, multicarrier modulations are good candidates to allow effective communication in any place.However current techniques, OFDM in particular, suffer from a bad time--frequency localization and peak-to-average power ratio, limiting their relevancy in an embedded context, or in scenarios with severe spectral constraints.In this thesis, we study faster-than-Nyquist multicarrier modulations.This kind of modulation allow for an increase in spectral efficiency by means of an increase in signaling density.This, in compensation, comes at the price of unavoidable self-interference, which makes demodulation harder.On an additive white Gaussian noise channel, we show how to carefully chose pulse-shapes that maximize signal-to-interference-plus-noise ratio.We show that these particular pulse-shapes yields a linear turbo-equalization of self-interference minimizing the mean squared error.Next, our work highlights the capability of these optimal pulse-shapes to reduce peak-to-average power ratio as density rises.Lastly, on frequency selective channels, we confirm that low complexity equalization using one tap by subcarrier is still possible.These results show how this new modulation technique helps increasing spectral efficiency while keeping what made multicarrier modulations popular: good adaptation to transmission channels.

Dans cette thèse, de nouvelles techniques d'égalisation et de précodage pour des systèmes multiporteuses ont été proposées et analysées. D'abord, la performance d'erreur des systèmes multiporteuses à base de bancs de filtres (FBMC) précodées a été analysée. Il a été découvert que cette performance est très sensible à l'égalisation complète des sous-canaux. Quand il y a de l'interference inter-symbole residuel qui vient de l'égalisation imparfaite du sous-canaux, il y a une perte de diversité; cette diversité peut être recuperée avec l'adoption d'un nombre de sous-canaux assez grand pour que chaque sous-canaux subisse de l'évanouissement plat ou avec l'utilisation d'un égaliseur de sous-canaux avec une longueur assez suffisante pour compenser cette réponse en fréquence. Après, une approximation pour la distribution du rapport signal/bruit-plus-interfèrence (SINR) des systèmes SC-FDE qui utilisent égalisation MMSE linéaire a été proposée. Cette approximation utilise la distribution lognormal avec la plus petit distance de Kullback-Leibler vers la vraie distribution, et il s'est révélé qu'elle est precise dans la performance d'erreur; elle sert aussi comme une abstraction de cette système. Avec cette abstraction, une méthode précise pour obtenir la performance d'erreur analytique codée de ces systèmes a été proposée. Finalement, des précodeurs Tomlinson-Harashima (THP) et égaliseurs (linéaires et à retour de décision) largement linéaires pour des systèmes SC-FDE ont été proposés. Ces précodeurs et égaliseurs ont une performance d'erreur mieux quand comparés avec ses versions strictement linéaires si des signaux de constellations impropres sont transmises. Aussi, la performance d'erreur quand des égaliseurs à retour de décision sont utilisés est moins sensible au longueur du filtre de retour. Quand des précodeurs largement linéaires sont utilisés, cette performance devient moins sensible à des erreurs d'estimation du canaux. / In this thesis, new precoding and equalization techniques for multicarrier systems were proposed and analyzed.First, the error performance of precoded filterbank multicarrier (FBMC) systems was analyzed. It was found out that this performance is highly sensitive to complete subchannel equalization. When there is residual intersymbol interference (ISI) stemming from imperfect subchannel equalization there is a loss of diversity; this loss can be prevented with the adoption of a number of subchannels large enough so that each subchannel suffers flat fading or with the utilization of a subchannel equalizer with sufficient length to compensate the subchannel frequency response.After that, an approximation for the signal to interference-plus-noise ratio (SINR) distribution of SC-FDE systems using linear MMSE equalization was proposed. This approximation uses the lognormal distribution with the smallest Kullback-Leibler distance to the true distribution, and was shown to be precise in the error performance sense; it serves as a system abstraction. With this abstraction, a precise method to obtain the analytical coded error performance of these systems was proposed.Finally, widely linear Tomlinson-Harashima precoders and equalizers (linear and decision-feedback) for SC-FDE systems were proposed. These precoders and equalizers have better error performance when compared to their strictly linear versions if signals coming from an improper constellation are transmitted. Their error performance when decision-feedback equalizers are used is less sensitive to the length of the feedback filter. When widely linear precoders are used, this error performance becomes less sensitive to channel estimation errors.

Abstract Multicarrier and multiple input–multiple output (MIMO) techniques have become popular in wireless communications over multipath fading channels in recent years. This thesis firstly considers the characterization and simulation of fading mobile radio channels for MIMO multicarrier systems. Secondly, the performance of spread-spectrum multicarrier (MC) code-division multiple-access (CDMA) with multirate transmission is analyzed. Thirdly, the analysis is applied to ultra-wideband (UWB) orthogonal frequency-division multiplexing (OFDM) systems enhanced with frequency-domain code-division multiplexing (CDM). The response of a small-scale fading channel is derived as a function of time, transmit and receive antenna positions, and subcarrier frequency, which leads to a tapped delay-line model with time-, space-, and frequency-selective taps. The taps are modeled as a sum of a deterministic line-of-sight or dominant scattered path and a zero-mean Gaussian part composed of a number of unresolvable scattered paths and, therefore, are Rice fading. The Gaussian parts have the desired temporal and spatiospectral correlations generated by time-correlation shaping filtering and a space-frequency correlation transformation, respectively. The simulator achieves a good accuracy while retaining a reasonable computational complexity. The generic performance analysis of MC-CDMA includes both the multicode and variable spreading factor (VSF) multirate schemes that are inherent for CDMA and capable of providing efficient support for services of different required data rates. The analysis also takes into account the intersymbol interference caused by the multipath delay components exceeding a guard interval, which is commonly omitted in the literature by assuming the guard interval to be longer than the maximum delay spread. Results comparing and pointing out notable differences in the error rate performance of the two multirate schemes in conjunction with six different combining techniques are presented for a synchronous downlink and both a synchronous and asynchronous uplink. The analysis of CDM-enhanced OFDM-UWB involves first a single piconet with different combinations of the VSF and multicode schemes. Frequency-domain spreading is found to improve the performance remarkably when a sufficient spreading factor and a suitable subcarrier combining method are used. Subsequently, CDMA of simultaneously operating piconets (SOPs) with either the VSF or multicode scheme is considered. While both multirate schemes result in a similar performance when the number of SOPs is large, notable differences arise when there are only a few SOPs.

No description available.