Sepsis är ett allvarligt tillstånd som uppstår när bakterier går från vävnad till blodbanan. Positiva blododlingar odlas på agarplattor och bakterier analyseras med Matrix Assisted Laser Desorption Ionisation Time-of-flight Mass spectrometry (MALDI-TOF MS) där prov blandas med en matrix och sedan bestrålas med laser. Proteinerna i provet joniseras och rör sig mot en detektor, vilket ger ett m/z-spektrum som jämförs med referensspektrum i en databas och ett score-värde erhålls över hur väl analyten liknar referensen. Arbetets syfte var att undersöka möjligheten att direktidentifiera bakterier från blod med en viss preparation innan analys med MALDI-TOF MS och på så vis möjliggöra snabbare preliminära svar samt undersöka möjligheten att särskilja Staphylocoocus aureus och koagulasnegativa stafylokocker. Innan analys med MALDI-TOF MS centrifugerades blod från positiva blododlingar blod i flera steg med 5 % natriumkloridlösning (NaCl-metoden). Dessutom testades ett kommersiellt kit (Sepsityper, Bruker Daltonics). Med NaCl-metoden sågs korrekt identifiering hos 66 % av inokulerade proverna. Av blododlingar innehållande med S. aureus respektive koagulasnegativa stafylokocker identifierades 60 % respektive 43 % av bakterierna korrekt. Med Sepsiptyper erhöll 58 % av proverna godkänt score-värde. Slutsatsen blev att det är möjligt att identifiera bakterier direkt från blod efter viss preparation, men metoden bör utvecklas mer då det fanns en signifikant skillnad i score mellan NaCl-metoden och nuvarande metod. Det är dock möjligt att skilja mellan Staphylococcus aureus och koagulasnegativa stafylokocker. Fler studier är nödvändiga för att avgöra möjligheten att föra in någon av metoderna i rutindiagnostiken.

>Magister Scientiae - MSc / Abiotic stress, mainly in the form of extreme temperatures, drought and salinity has caused major crop losses worldwide, putting a severe strain on agriculture. Salinity severely limits plant growth and productivity and affects all aspects of the plant’s development including the most crucial stage; germination. This study investigated the effect of salt (NaCl) stress on Sorghum bicolor seedlings and the role of exogenously applied calcium (Ca2+) to ameliorate the effects of salt stress during germination. Sorghum seeds were germinated in the presence and absence of various NaCl (100, 200 and 300 mM) and Ca2+ (5, 15 and 35 mM) concentrations. Several assays including physiological (germination and growth assays), biochemical (osmolytes and oxidative stress markers), anatomical (epidermal and xylem layers) and expression profiles of key genes [antioxidant (SbSOD, SbAPX2 and SbCAT3), Salt Overly Sensitive (SbSOS1, 2 and 3) pathway enzymes and the vacuolar Na+/H+ exchanger antiporter2 (SbNHX2)] were investigated. Salt stress delayed germination and negatively affected growth as observed by the reduced root and shoot length and decreased fresh and dry weight. There was an increase in proline content and oxidative stress markers (H2O2 and MDA) under salt stress. Oxidative stress resulted in damage to the epidermal and xylem layers as observed on Scanning Electron Microscopy (SEM) images. Quantitative real-time polymerase chain reaction revealed that salt stress induced the expression of SbAPX2, SbCAT3 and SbSOS1 genes, whereas SbSOD4A, SbSOS2, SbSOS3 and SbNHX2 genes were not affected by salt. Exogenous application of Ca2+ counteracted the harmful effects of salt stress by improving germination efficiency, promoting seedling growth, reducing oxidative damage and the Na+/K+ ratio, indicating the protective effect. Ca2+ also effectively protected the epidermis and xylem layers from the severe damage caused by salt stress. In the presence of Ca2+ the expression of SbAPX2 and SbCAT3 was reduced except for the SbNHX2 gene, which increased by 65-fold compared to the control. The results obtained suggests that sorghum is able to respond to salt stress by inducing osmolytes, the antioxidant defence system as well as the SOS pathway. Furthermore, 5 mM Ca2+ was determined as the optimum Ca2+ concentration required to enhance sorghum’s tolerance to salt stress.

L'objectif de ce travail est de comprendre les effets d'un changement de composition des modèles fromagers sur la mobilité, la libération et la perception de molécules de la flaveur (sel, composés d'arôme). Six modèles fromagers aromatisés ont été formulés (3 ratios lipides/protéines (L/P) et 2 teneurs en sel). La microstructure et les propriétés rhéologiques des modèles fromagers ont été caractérisées respectivement par microscopie confocale et par compression uniaxiale. La mobilité des ions sodium a été analysée par RMN 23Na. La cinétique de libération des ions sodium a été suivie dans l'eau, puis dans la salive, en situation de consommation. La libération rétronasale des composés d'arôme a été suivie par nose-space APCI-MS, simultanément au suivi des déglutitions, et de la mastication par électromyographie. Enfin, les propriétés sensorielles des modèles fromagers (intensité salée, arôme, texture) ont été étudiées.Une diminution du ratio L/P et une diminution de la teneur en sel diminuent la taille des gouttelettes lipidiques et augmentent la fermeté. Cela conduit à une diminution de la mobilité des ions sodium, qui se traduit par une diminution de la quantité de sodium libéré dans la salive et une diminution de la perception salée. De plus, le maximum de libération d'arôme est atteint plus tard et la perception aromatique est diminuée. Ces effets peuvent être expliqués par la répartition lipides/protéines observée en microscopie, par une déglutition plus tardive et une plus grande activité masticatoire

A aplicação prática de resíduos industriais, como cinza volante proveniente da queima de carvão, em bases e sub-bases de rodovias, é de grande interesse para engenheiros geotécnicos, uma vez que reduz o consumo de recursos naturais e oferece um destino a esses resíduos. Nesse sentido, esta dissertação de mestrado avalia o desempenho de misturas cinza volante-cal submetidas a condições climáticas extremas. Foram analisadas as propriedades resistência, rigidez e durabilidade de misturas de cinza volante (25%) com areia de Osório, comparando-se ciclos de molhagem-secagem com ciclos de congelamento-degelo. Para isso variou-se: o teor de cal hidratada (3%, 5%, 7%), o grau de compactação (14,0 kN/m³, 15,0 kN/m³, 16,0 kN/m³), a adição de 0,5% de cloreto de sódio (NaCl) como catalisador e a adição de 0,5% de fibras de polipropileno. Foi estudada a influência da temperatura (23°C e 40°C) em um período de 7 dias de cura, chegando-se à conclusão que o aumento de temperatura proporciona elevados ganhos de durabilidade por congelamento e degelo, resistência e rigidez, assim como a adição de sal e fibras de polipropileno Visando ampliar esta pesquisa foi proposta a troca da matriz da mistura (areia de Osório) por fresado (RAP) e a cal hidratada pela cal de carbureto. Para esse novo tipo de mistura, também foi realizado ensaios triaxiais para análise do comportamento tensão-deformação em relação a adição de 0,5% de NaCl, onde percebeu-se um aumento de 3,4° no ângulo de atrito e de 42,8 kPa no intercepto coesivo. As misturas de RAP e cal de carbureto obtiveram melhores resultados de resistência por compressão e durabilidade do que as misturas com areia de Osório e cal dolomítica, para a mesma temperatura de cura. Posteriormente constatou-se que a perda de massa acumulada após os referidos tipos de ciclos é controlada pelo índice porosidade (η)/teor volumétrico de cal (Liv), para ambas as misturas. Além disso, percebeu-se que menores perdas de massa acumulada foram obtidas para os ciclos de molhagem e secagem comparados aos ciclos de congelamento e degelo, tanto para as misturas com areia quanto para as misturas com RAP. / The practical application of industrial residues, such as coal fly ash, on bases and sub-bases of highways, is of great interest to geotechnical engineers, since it reduces the consumption of natural resources and gives a destination to these residues. In this sense, this master's thesis evaluates the performance of coal fly ash-lime mixtures under extreme climatic conditions. Was analysed the impact of the hydrated lime content (3%, 5%, 7%), the degree of compaction (14.0 kN/m³, 15.0 kN/m³, 16.0 kN/m³), the addition of 0.5% sodium chloride (NaCl) as a catalyst and the addition of 0.5% polypropylene fibers, on strength, stiffness and durability (comparing freezing-thawing to wetting-drying cycles), in fly ash mixtures (25%) with Osório sand. The influence of temperature (23 °C and 40 °C) in a period of 7 days of cure was also studied, this increase in temperature has been shown to provide high durability (for freezeing-thawing cycles), strength and stiffness gains, as well as addition of salt and polypropylene fibers. In order to extend this research, it was propose the exchange of the matrix’s mixture (Osório sand) by reclaimed asphalt paving (RAP) and lime hydrated by carbide lime For this new type of mixture, triaxial tests are also performed to analyze the stress-strain behavior in relation to the addition of 0.5% NaCl, where a 3.4° increase in the friction angle was observed, and 42.8 kPa in the cohesive intercept. The mixtures of RAP and carbide lime obtained better strength and durability results than mixtures with Osório sand and dolomitic lime, for the same cure temperature. Subsequently, It was verified that the accumulated loss of after these kinds of cycles is controlled by the index of porosity (η) / volumetric content of lime (Liv), for both mixtures. Besides that, lower losses of accumulated mass was observed for the wetting and drying cycles, compared to the freezing and thawing cycles.

Les matériaux cimentaires peuvent se détériorer grandement lorsqu'ils sont soumis à des cycles de gel/dégel avec ou sans sels de déverglaçage. Ceci peut porter atteinte à la durabilité à long terme des bétons/mortiers dans les régions aux hivers froids. Laissant de côté les processus d'endommagement et de rupture mécanique à l'oeuvre dans de tels problèmes, ce mémoire de thèse est consacré aux phénomènes physiques et thermo-mécaniques accompagnant la solidification de l'eau dans des solides poreux cohésifs, avec une attention particulière aux "propriétés matériau" issues de l'hydratation du ciment et de l'évolution de la microstructure. Ce travail reprend la poromécanique des milieux poreux partiellement gelés telle que développée par Olivier Coussy, tout en lui adjoignant une analyse de l'effet de la fin de la surfusion (en volume, hors contribution capillaire) et de la présence de sels dans le liquide saturant l'espace poreux. Nous avons mesuré la température de fin de surfusion en fonction de la concentration en sel. Ceci nous permet ensuite de calculer l'angle de contact entre la glace et les parois des pores dans le cadre classique de la nucléation hétérogène : on trouve que cet angle diminue avec la concentration en sel. Nous montrons que la dilatation instantanée consécutive à la fin de la surfusion dépend de la structure poreuse puisque cette dernière détermine la teneur en glace dans l'espace poreux. À l'aide de la distribution de tailles de pores estimée par porosimétrie par intrusion de mercure, nous estimons le degré de saturation en glace en fonction de la température et de la concentration initiale en sel via la relation de Gibbs-Thomson. Nous avons mesuré la déformation d'échantilllons de pâte de ciment saturée. L'analyse poromécanique montre que la déformation dépend de la concentration initiale en sel et de la structure poreuse des pâtes de ciment. En utilisant la même approche expérimentale sur des pâtes de ciment sèches, nous trouvons que la porosité (avec ou sans vide d'air entraîné) influence significativement le coefficient d'expansion thermique du matériau. En ce qui concerne les pâtes de ciment saturées, les mesures expérimentales et l'approche poromécanique en condition drainée ou non-drainée montrent que le degré de saturation initiale en liquide des vides d'air entraîné a un impact important sur la déformation de l'échantillon avec la température.

The market for polyamide desalination membranes is expected to continue to grow during the coming decades. Purification of alternative water sources will also be necessary to meet growing water demands. Purification of produced water, a byproduct of oil and gas production, is of interest due to its dual potential to provide water for beneficial use as well as to reduce wastewater disposal costs. However, current polyamide membranes are prone to fouling, which decreases water flux and shortens membrane lifetime. This research explored surface modification using poly(ethylene glycol) diglycidyl ether (PEGDE) to improve the fouling resistance of commercial polyamide membranes. Characterization of commercial polyamide membrane performance was a necessary first step before undertaking surface modification studies. Membrane performance was found to be sensitive to crossflow testing conditions. Concentration polarization and feed pH strongly influenced NaCl rejection, and the use of continuous feed filtration led to higher water flux and lower NaCl rejection than was observed for similar tests performed using unfiltered feed. Two commercial polyamide membranes, including one reverse osmosis and one nanofiltration membrane, were modified by grafting PEGDE to their surfaces. Two different PEG molecular weights (200 and 1000) and treatment concentrations (1% (w/w) and 15% (w/w)) were studied. Water flux decreased and NaCl rejection increased with PEGDE graft density ([microgram]/cm2), although the largest changes were observed for low PEGDE graft densities. Surface properties including hydrophilicity, roughness and charge were minimally affected by surface modification. The fouling resistance of modified and unmodified membranes was compared in crossflow filtration studies using model foulant solutions consisting of either a charged surfactant or an oil in water emulsion containing n-decane and a charged surfactant. Several PEGDE-modified membranes demonstrated improved fouling resistance compared to unmodified membranes of similar initial water flux, possibly due to steric hindrance imparted by the PEG chains. Fouling resistance was higher for membranes modified with higher molecular weight PEG. Fouling was more extensive for feeds containing the cationic surfactant, potentially due to electrostatic attraction with the negatively charged membranes. However, fouling was also observed in the presence of the anionic surfactant, indicating hydrodynamic forces are also responsible for fouling. / text

A aplicação prática de resíduos industriais, como cinza volante proveniente da queima de carvão, em bases e sub-bases de rodovias, é de grande interesse para engenheiros geotécnicos, uma vez que reduz o consumo de recursos naturais e oferece um destino a esses resíduos. Nesse sentido, esta dissertação de mestrado avalia o desempenho de misturas cinza volante-cal submetidas a condições climáticas extremas. Foram analisadas as propriedades resistência, rigidez e durabilidade de misturas de cinza volante (25%) com areia de Osório, comparando-se ciclos de molhagem-secagem com ciclos de congelamento-degelo. Para isso variou-se: o teor de cal hidratada (3%, 5%, 7%), o grau de compactação (14,0 kN/m³, 15,0 kN/m³, 16,0 kN/m³), a adição de 0,5% de cloreto de sódio (NaCl) como catalisador e a adição de 0,5% de fibras de polipropileno. Foi estudada a influência da temperatura (23°C e 40°C) em um período de 7 dias de cura, chegando-se à conclusão que o aumento de temperatura proporciona elevados ganhos de durabilidade por congelamento e degelo, resistência e rigidez, assim como a adição de sal e fibras de polipropileno Visando ampliar esta pesquisa foi proposta a troca da matriz da mistura (areia de Osório) por fresado (RAP) e a cal hidratada pela cal de carbureto. Para esse novo tipo de mistura, também foi realizado ensaios triaxiais para análise do comportamento tensão-deformação em relação a adição de 0,5% de NaCl, onde percebeu-se um aumento de 3,4° no ângulo de atrito e de 42,8 kPa no intercepto coesivo. As misturas de RAP e cal de carbureto obtiveram melhores resultados de resistência por compressão e durabilidade do que as misturas com areia de Osório e cal dolomítica, para a mesma temperatura de cura. Posteriormente constatou-se que a perda de massa acumulada após os referidos tipos de ciclos é controlada pelo índice porosidade (η)/teor volumétrico de cal (Liv), para ambas as misturas. Além disso, percebeu-se que menores perdas de massa acumulada foram obtidas para os ciclos de molhagem e secagem comparados aos ciclos de congelamento e degelo, tanto para as misturas com areia quanto para as misturas com RAP. / The practical application of industrial residues, such as coal fly ash, on bases and sub-bases of highways, is of great interest to geotechnical engineers, since it reduces the consumption of natural resources and gives a destination to these residues. In this sense, this master's thesis evaluates the performance of coal fly ash-lime mixtures under extreme climatic conditions. Was analysed the impact of the hydrated lime content (3%, 5%, 7%), the degree of compaction (14.0 kN/m³, 15.0 kN/m³, 16.0 kN/m³), the addition of 0.5% sodium chloride (NaCl) as a catalyst and the addition of 0.5% polypropylene fibers, on strength, stiffness and durability (comparing freezing-thawing to wetting-drying cycles), in fly ash mixtures (25%) with Osório sand. The influence of temperature (23 °C and 40 °C) in a period of 7 days of cure was also studied, this increase in temperature has been shown to provide high durability (for freezeing-thawing cycles), strength and stiffness gains, as well as addition of salt and polypropylene fibers. In order to extend this research, it was propose the exchange of the matrix’s mixture (Osório sand) by reclaimed asphalt paving (RAP) and lime hydrated by carbide lime For this new type of mixture, triaxial tests are also performed to analyze the stress-strain behavior in relation to the addition of 0.5% NaCl, where a 3.4° increase in the friction angle was observed, and 42.8 kPa in the cohesive intercept. The mixtures of RAP and carbide lime obtained better strength and durability results than mixtures with Osório sand and dolomitic lime, for the same cure temperature. Subsequently, It was verified that the accumulated loss of after these kinds of cycles is controlled by the index of porosity (η) / volumetric content of lime (Liv), for both mixtures. Besides that, lower losses of accumulated mass was observed for the wetting and drying cycles, compared to the freezing and thawing cycles.

A aplicação prática de resíduos industriais, como cinza volante proveniente da queima de carvão, em bases e sub-bases de rodovias, é de grande interesse para engenheiros geotécnicos, uma vez que reduz o consumo de recursos naturais e oferece um destino a esses resíduos. Nesse sentido, esta dissertação de mestrado avalia o desempenho de misturas cinza volante-cal submetidas a condições climáticas extremas. Foram analisadas as propriedades resistência, rigidez e durabilidade de misturas de cinza volante (25%) com areia de Osório, comparando-se ciclos de molhagem-secagem com ciclos de congelamento-degelo. Para isso variou-se: o teor de cal hidratada (3%, 5%, 7%), o grau de compactação (14,0 kN/m³, 15,0 kN/m³, 16,0 kN/m³), a adição de 0,5% de cloreto de sódio (NaCl) como catalisador e a adição de 0,5% de fibras de polipropileno. Foi estudada a influência da temperatura (23°C e 40°C) em um período de 7 dias de cura, chegando-se à conclusão que o aumento de temperatura proporciona elevados ganhos de durabilidade por congelamento e degelo, resistência e rigidez, assim como a adição de sal e fibras de polipropileno Visando ampliar esta pesquisa foi proposta a troca da matriz da mistura (areia de Osório) por fresado (RAP) e a cal hidratada pela cal de carbureto. Para esse novo tipo de mistura, também foi realizado ensaios triaxiais para análise do comportamento tensão-deformação em relação a adição de 0,5% de NaCl, onde percebeu-se um aumento de 3,4° no ângulo de atrito e de 42,8 kPa no intercepto coesivo. As misturas de RAP e cal de carbureto obtiveram melhores resultados de resistência por compressão e durabilidade do que as misturas com areia de Osório e cal dolomítica, para a mesma temperatura de cura. Posteriormente constatou-se que a perda de massa acumulada após os referidos tipos de ciclos é controlada pelo índice porosidade (η)/teor volumétrico de cal (Liv), para ambas as misturas. Além disso, percebeu-se que menores perdas de massa acumulada foram obtidas para os ciclos de molhagem e secagem comparados aos ciclos de congelamento e degelo, tanto para as misturas com areia quanto para as misturas com RAP. / The practical application of industrial residues, such as coal fly ash, on bases and sub-bases of highways, is of great interest to geotechnical engineers, since it reduces the consumption of natural resources and gives a destination to these residues. In this sense, this master's thesis evaluates the performance of coal fly ash-lime mixtures under extreme climatic conditions. Was analysed the impact of the hydrated lime content (3%, 5%, 7%), the degree of compaction (14.0 kN/m³, 15.0 kN/m³, 16.0 kN/m³), the addition of 0.5% sodium chloride (NaCl) as a catalyst and the addition of 0.5% polypropylene fibers, on strength, stiffness and durability (comparing freezing-thawing to wetting-drying cycles), in fly ash mixtures (25%) with Osório sand. The influence of temperature (23 °C and 40 °C) in a period of 7 days of cure was also studied, this increase in temperature has been shown to provide high durability (for freezeing-thawing cycles), strength and stiffness gains, as well as addition of salt and polypropylene fibers. In order to extend this research, it was propose the exchange of the matrix’s mixture (Osório sand) by reclaimed asphalt paving (RAP) and lime hydrated by carbide lime For this new type of mixture, triaxial tests are also performed to analyze the stress-strain behavior in relation to the addition of 0.5% NaCl, where a 3.4° increase in the friction angle was observed, and 42.8 kPa in the cohesive intercept. The mixtures of RAP and carbide lime obtained better strength and durability results than mixtures with Osório sand and dolomitic lime, for the same cure temperature. Subsequently, It was verified that the accumulated loss of after these kinds of cycles is controlled by the index of porosity (η) / volumetric content of lime (Liv), for both mixtures. Besides that, lower losses of accumulated mass was observed for the wetting and drying cycles, compared to the freezing and thawing cycles.

Made available in DSpace on 2014-08-20T14:06:13Z (GMT). No. of bitstreams: 1 dissertacao_rodrigo_danielowski.pdf: 1497530 bytes, checksum: fb08b2775f06eaa51226b61c30eb11ec (MD5) Previous issue date: 2013-08-23 / Rice (Oryza sativa. L) is the second most produced cereal worldwide. Soil salinity is one of the most severe abiotic stresses for various crop species. Currently, 6% of arable land on the planet have a limitation due to salinity levels in the soil, it is estimated that by the year 2050, 50% of agricultural soils present limitations due to soil salinity. Rice is one of the crops most sensitive to soil salinity, reductions in productivity are observed at levels of electrical conductivity of 3.0 dS m-1. The hydroponic growing systems are being increasingly used in scientific studies, and a major advantage of this technique is the control of the studied factors and homogeneity of the environment. This study aimed to evaluate genotypes of rice germplasm bank of EMBRAPA temperate in two hydroponic growing systems effecting the correlation of the results obtained in the two systems. The one experiment was conducted in a greenhouse and the second in a room with controlled temperature and photoperiod. The nutrient solution used in the experiments was YOSHIDA et al. (1976) with some adaptations, and salinity levels used were 0, 30, 60 and 90 mM NaCl. The correlation study was conducted with 24 genotypes evaluated in two experiments, adopting also only 0, 30 and 60 mM as dose factors. The two cultivation environments provided genotype variation of the response as a function of NaCl concentration levels. The cropping system in a controlled environment at the level of 90 mM caused the death of almost all plants. The correlation study revealed no association between the two culture environments, should be made a further study in field conditions to validate and compare the efficiency of the methods. / O arroz (Oryza sativa .L) é o segundo cereal mais produzido no mundo. A salinidade dos solos é um dos estresses abióticos mais severos para diversas espécies cultivadas. Atualmente 6 % das áreas agricultáveis do planeta apresentam limitação devido aos níveis de salinidade presentes no solo, estima-se que até o ano de 2050, 50% dos solos agricultáveis apresentem limitações devido a salinidade dos solos. O arroz é uma das culturas mais sensíveis a salinidade dos solos, reduções na produtividade são observados em níveis de condutividade elétrica de 3,0 dS m-1. Os sistemas de cultivo hidropônico vem sendo cada vez mais utilizados em estudos científicos, sendo que uma das principais vantagem desta técnica, é o controle dos fatores estudados e a homogeneidade do ambiente. O presente trabalho teve como objetivo avaliar genótipos de arroz do banco de germoplasma da EMBRAPA clima temperado, em dois sistemas de cultivo hidropônico efetuando-se a correlação dos resultados obtidos nos dois sistemas. O experimento um foi conduzido em casa de vegetação e o segundo em ambiente com controle de fotoperíodo e temperatura. A solução nutritiva utilizada nos experimentos foi YOSHIDA et al. (1976) com algumas adaptações, e os níveis de salinidade empregados foram de 0, 30, 60 e 90 mM de NaCl. O estudo das correlações dos resultados foi realizado com os 24 genótipos que foram avaliados nos dois experimentos, adotando-se também apenas os nível de 0, 30 e 60 mM do fator dose. Os dois ambientes de cultivo proporcionaram variação da resposta dos genótipos em função dos níveis da concentração de NaCl. O sistema de cultivo em ambiente controlado no nível de 90 mM causou a morte de quase todas as plantas. O estudo da correlação não revelou associação entre os dois ambientes de cultivo, devendo-se realizar um próximo estudo em condições de campo para validar e comparar a eficiência dos métodos.

The use of bolts as an element of union has a great importance in industrial situations that need frequent assembling and disassembly. In the present study, the effect of the mean stress and frequency on the fatigue of screw bolts made from cold-formed threaded bars was evaluated. The bolts was made with austenitic stainless steel, AISI 304, and it were tested in two different environments, air and 35g/L NaCl aqueous solution. Initially, tensile testing, chemical analysis, microstructural analysis, x-ray diffraction and hardness were did by the metallurgical characterization. The fatigue tests occurred with mean stress equal to 40% and 60% of yield strength. After the tests, the appearance of the fracture surface was observed. It has been found that the fatigue limit remains unchanged with respect to the mean stress in the air tests at a higher frequency. However, air tests at low frequencies and under corrosion fatigue follow Goodman's prediction. Already, in the tests under corrosion, the higher mean stress tends to decrease the value of the stress amplitude resistant to corrosion fatigue under the conditions applied in the present study. The results were compared with the theoretical models of life expectancy in fatigue and with the results of Burguete and Patterson (1995). / A utilização de parafusos como elementos de união tem grande importância em situações industriais com montagens e desmontagens frequentes. No presente estudo, avaliou-se o efeito da tensão média e frequência de solicitação na fadiga de parafusos prisioneiros confeccionados a partir de barras roscadas conformadas a frio. Fabricados em aço inoxidável austenítico, AISI 304. Os parafusos foram caracterizados através de ensaio de tração, análise química, análise microestrutural, difração de raios x e dureza. Esses parafusos foram testados em dois diferentes ambientes, ao ar e em solução aquosa a 35g/L de NaCl. Os ensaios de fadiga ocorreram com carregamento médio a 40% e 60% da tensão de escoamento. Após os ensaios, o aspecto da superfície de fratura foi observado. A amplitude de tensão de fadiga se mantém inalterada em relação à tensão média nos ensaios ao ar com frequência elevada. No entanto, ensaios ao ar em baixas frequências e corrosão fadiga seguem a previsão de Goodman. Estes ensaios mostraram que a maior tensão média tende a diminuir o valor da tensão alternante resistente à corrosão-fadiga nas condições aplicadas no presente estudo. Os resultados foram comparados com os modelos teóricos de previsão da vida em fadiga e com os resultados de Burguete e Patterson (1995). / São Cristóvão, SE