Spelling suggestions: "subject:"opt""
21 |
Computational and Experimental Approach for Non-destructive Testing by Laser ShearographyChen, Xiaoran 06 August 2014 (has links)
"Non-destructive testing (NDT) is critical to many precision industries because it can provide important information about the structural health of critical components and systems. In addition, NDT can also identify situations that could potentially lead to critical failures. Specifically, NDT by optical methods have become popular because of their non-contact and non-invasive nature. Shearography is a high-resolution optical NDT method for identification and characterization of structural defects in components and has gained wide acceptance over the last decade. Traditional workflow of NDT by shearography has been determined to be inefficient, due to the requirements of having experienced operators that must determine the most suitable loading methods to identify defects in samples under testing as well as to determine the best system arrangement for obtaining the maximum measuring sensitivity. To reduce the number of experiments that are required and to allow inspectors to perform NDT by laser shearography in a more efficient way, it is necessary to optimize the experimental workflow. The goal of the optimization would be an appropriate selection of all experimental variables including loading methods, boundary conditions, and system¡¯s sensitivities, in order to avoid repeating experiments several times in the processes of components characterization and health monitoring. To achieve this goal, a hybrid approach using shearographic fringe prediction with Finite Element Analysis (FEA) has been developed. In the FEA simulations, different loading conditions are applied to samples with defects, and in turn, the shearographic fringes are predicted. Fringe patterns corresponding to specific loading conditions that are capable of detecting defects are chosen and experimental tests are performed using those loading conditions. As a result, using this approach, inspectors could try different combinations of loading methods, and system¡¯s sensitivities to investigate and select appropriate experimental parameters to improve defect detection capabilities of the system by using low-cost computer simulations instead of lengthy and expensive experiments. In addition, to improve the identification of defects on the sample, camera calibration and image registration algorithms are used to project the detected defects on the sample itself to locate and visualize the position of defects during shearographic investigations. This hybrid approach is illustrated by performing NDT of a plate made of acrylic that has a partial hole at the center. Fringe prediction with finite element analysis are used to characterize the optimized experimental procedures and in turn, corresponding measurements are performed. A multimedia projector is employed to project the defects on the surface of the plate in order to visualize the location of the partial hole (defect). Furthermore, shearographic system is used for other applications including NDT of a composites plate and of a thin latex membrane. The procedures shows the effectiveness of the approach to perform NDT with shearography methods. "
|
22 |
Synchronization dynamics of dual-mode solid-state and semiconductor DFB lasers under frequency-shifted feedback : applications to microwave photonics / Dynamiques de synchronisation de lasers bifréquence à état solide et DFB soumis à une réinjection décalée en fréquence : applications en photonique micro-ondeThorette, Aurélien 30 November 2018 (has links)
Le contrôle de la différence de fréquence entre deux lasers est un défi transversal à de nombreux domaines de la photonique, que ce soit dans un but de génération hétérodyne d'un battement micro-onde de grande pureté, ou pour des expériences de métrologie ou de télécommunication. L'avancée des connaissances sur la dynamique de lasers soumis à divers couplages a permis le développement de méthodes de stabilisation basées sur l'injection optique. Nous étudions ici théoriquement et expérimentalement un mécanisme appelé réinjection décalée en fréquence (RDF), qui permet dans des situations variées de contrôler précisément la différence de fréquence entre deux lasers. Dans un premier temps, la méthode RDF est appliquée à un laser à état solide bi-polarisation bi-fréquence Nd:YAG afin de verrouiller en phase ses deux modes de polarisation orthogonaux. Le développement d'un modèle type «rate equations» en bonne adéquation avec les expériences a aussi permis de mettre en lumière un certain nombre de régimes de synchronisation partielle dits de phase bornée. De plus, nous montrons que cet état peut subsister en présence d'oscillations chaotiques de l'intensité et de la phase. Le comportement du laser sous RDF est étudié pour différentes valeurs du désaccord de fréquence, du taux d'injection, du retard éventuel, et du couplage inter-modes. Enfin, la nécessité d'inclure un couplage phase-amplitude (facteur de Henry non-nul) dans le modèle a mené au développement d'une méthode pour mesurer ce coefficient habituellement négligé dans les lasers solides. Le mécanisme de stabilisation par RDF est ensuite appliqué à un composant semiconducteur original contenant deux lasers DFB sur InP. Malgré une plus grand complexité du schéma de couplage, et la présence de retards effectifs importants, il reste possible de synchroniser en phase ces lasers. Des bandes d'accrochages liées au retard sont observées, et reproduites à l'aide d'un modèle numérique. Ce dernier permet aussi de déterminer les conditions de fonctionnement minimisant l'influence de paramètres expérimentaux non maîtrisés. Enfin, ce système, permettant de contrôler une phase micro-onde sur porteuse optique, peut être intégré dans une boucle résonante de type oscillateur opto-électronique (OEO) qui ne nécessite pas de référence externe. On réalise un oscillateur micro-onde sur porteuse optique auto-référencé, à bande latérale unique, ayant des performances encourageantes. Dans ce cadre, il semble que la plupart des techniques développées pour les OEO puissent être réinvesties. / The control of the frequency difference between two lasers is a cross-cutting challenge in many fields of photonics, either for the generation of high-purity heterodyne microwave beatnotes, or in metrology and telecommunication experiments. The advances of the comprehension of laser dynamics under various couplings has allowed to develop stabilization methods based on optical injection. We study here theoretically and experimentally a mechanism called frequency-shifted feedback (FSF), which allows to precisely control the frequency difference between two lasers in several situations.First, the FSF method is applied to a dual-frequency dual-polarization solid-state Nd:YAG laser, in order to lock the phases of its two orthogonal polarization modes. A model of rate equations is used to precisely describe the experiment, and allows to highlight partial "bounded phase" synchronization regimes. Furthermore, we show that in some cases this synchronization can subsist even with chaotic oscillations of the intensity and phase. The behavior of the laser under FSF is studied for varying values of the frequency detuning, injection rate, possible injection delay, and mode coupling in the active medium. Finally, we find that the inclusion of a phase-amplitude coupling (non-zero linewidth enhancement factor) is needed in the model to account for experimental observation. This leads to the development of an ad-hoc technique to measure the low value of this usually neglected factor in solid-laser lasers.The FSF stabilization mechanism is then applied to a custom semiconductor component embedding two DFB lasers overs InP. In spite of a more complex coupling scheme and the large effective delays into play, phase locking of the two lasers is possible. Due to the delay, locking bands appear when the detuning changes, and this behavior can be replicated using a numerical model. This model also permit to determine working conditions minimizing the influence of uncontrolled experimental optical feedback phases. Finally, as this system allows to control a microwave phase over an optical carrier, it can be integrated in a resonant loop not unlike an opto-electronic oscillator (OEO). We realized an oscillator generating a self-referenced, single sideband microwave signal over an optical carrier, with encouraging phase noise performances. In this case, it seems that most of the techniques that exist for standard OEO can be reused.
|
23 |
OPTO-VLSI PROCESSING FOR RECONFIGURABLE OPTICAL DEVICESPOH, Chung, chungp@student.ecu.edu.au January 2006 (has links)
The implementation of Wavelength Division Multiplexing system (WDM) optical fibre transmission systems has the potential to realise this high capacity data rate exceeding 10 Tb/s. The ability to reconfigure optical networks is a desirable attribute for future metro applications where light paths can be set up or taken down dynamically as required in the network. The use of microelectronics in conjunction with photonics enables intelligence to be added to the high-speed capability of photonics, thus realising reconfigurable optical devices which can revolutionise optical telecommunications and many more application areas. In this thesis, we investigate and demonstrate the capability of Opto-VLSI processors to realise a reconfigurable WDM optical device of many functions, namely, optical multiband filtering, optical notch filtering, and reconfigurable-Optical-Add-Drop Multiplexing (ROADM). We review the potential technologies available for tunable WDM components, and discuss their advantages and disadvantages. We also develop a simple yet effective algorithm that optimises the performance of Opto-VLSI processors, and demonstrate experimentally the multi-function WDM devices employing Opto-VLSI processors. Finally, the feasibility of Opto-VLSI-based WDM devices in meeting the stringent requirements of the optical communications industry is discussed.
|
24 |
Contribution à la modélisation hiérarchique de systèmes opto-électroniques à base de VHDL-AMSKarray, Mohamed 12 1900 (has links) (PDF)
Dans un contexte technologique où le degré d'intégration des circuits en micro et optoélectronique est de plus en plus fort, il apparaît nécessaire aux concepteurs de ces circuits de disposer d'outils de simulation complets permettant non seulement d'étudier le fonctionnement des différents éléments constitutifs des sous-systèmes qu'ils réalisent, mais également d'évaluer les performances globales de l'ensemble. Ce travail de thèse porte sur l'élaboration de modèles de composants optoélectroniques en utilisant le langage VHDL-AMS, langage particulièrement bien adapté à la modélisation de systèmes multi-domaines en intégrant les différentes contraintes: l'électronique, l'optique, la thermique ou la mécanique. Ce langage offre aussi la possibilité de modéliser à différents niveaux d'abstraction un même système. Notre travail se situe dans le contexte du projet SHAMAN, dont le but était de modéliser chaque composant d'un microsystème opto-électronique à haut débit, courte distance et à fortes interactions thermiques et mécaniques. La mise en œuvre d'une méthodologie de modélisation hiérarchique permettant de commuter entre deux conceptions ascendante et descendante amène à des solutions optimales en termes de performances, de coût et de temps de conception: ceci en ré-utilisant des composants virtuels dont l'utilisation est régie par des règles de propriétés intellectuelles (IP).
|
25 |
Development of an Efficient Quasi-3D Microfluidic Flow Model and Fabrication and Characterization of an All-PDMS Opto-Microfluidic Flow CytometerIslam, Md Zahurul Unknown Date
No description available.
|
26 |
An?lise da distribui??o do volume pulmonar total e compartimental de crian?as com peso normal e obesidade em diferentes posturasSilva, Let?cia Maria Mendon?a e 13 March 2012 (has links)
Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2015-10-23T14:10:53Z
No. of bitstreams: 1
LeticiaMariaMendoncaESilva_DISSERT.pdf: 1486124 bytes, checksum: 4db7b8134c016e4d67f2848679d2e597 (MD5) / Approved for entry into archive by clediane guedes (clediane@bczm.ufrn.br) on 2015-10-23T20:20:35Z (GMT) No. of bitstreams: 1
LeticiaMariaMendoncaESilva_DISSERT.pdf: 1486124 bytes, checksum: 4db7b8134c016e4d67f2848679d2e597 (MD5) / Made available in DSpace on 2015-10-23T20:20:35Z (GMT). No. of bitstreams: 1
LeticiaMariaMendoncaESilva_DISSERT.pdf: 1486124 bytes, checksum: 4db7b8134c016e4d67f2848679d2e597 (MD5)
Previous issue date: 2012-03-13 / Introdu??o: A obesidade infantil apresenta incid?ncia crescente e as poss?veis comorbidades, como altera??o da fun??o respirat?ria, est?o cada vez mais presente nessa faixa et?ria. O tecido adiposo imp?e carga ao sistema respirat?rio o que leva a um padr?o restritivo. Essa condi??o sofre altera??es com as mudan?as posturais, onde a gravidade influencia o padr?o respirat?rio de acordo com o posicionamento adotado. Objetivo: Avaliar a distribui??o dos volumes total e regional e o movimento t?racoabdominal de crian?as e adolescentes que est?o acima do peso nas posturas supino e sentado. M?todos: Cinq?enta e duas crian?as/adolescentes (8-12 anos) divididas em tr?s grupos: Grupo Obeso (GO=22); Grupo Sobrepeso (GSP=9); Grupo Controle (GC=21) foram avaliadas quanto ?s medidas antropom?tricas, teste de fun??o pulmonar, exame das press?es respirat?rias m?xima e a pletismografia optoeletr?nica em duas posturas, supino e sentado, durante a respira??o tranquila. Resultados: As crian?as que est?o obesas apresentaram maiores valores em rela??o ao GSP e GC das seguintes vari?veis espirom?tricas: volume expirat?rio for?ado no primeiro segundo (VEF1) (p<0.05) e capacidade vital for?ada (CVF) (p<0.01). No exame de manovacuometria o GO apresentou um aumento na press?o inspirat?ria m?xima (PIm?x) (p<0.01) em compara??o com os outros grupos. Quanto ? distribui??o do volume corrente, o GO possui uma maior contribui??o do compartimento abdominal (AB) na postura supina (p<0.05) em rela??o ao GC e GSP, enquanto que na postura sentada os grupos n?o diferiram em rela??o ? distribui??o dos volumes. O GO apresentou maior assincronia na postura supina (p<0.05) e maior velocidade de encurtamento (p<0.05) em rela??o os outros grupos. Conclus?o: A obesidade em crian?as/adolescentes n?o provoca preju?zos na fun??o pulmonar, incrementa a for?a muscular inspirat?ria, aumenta a participa??o do compartimento AB e a assincronia no MTA na postura em supino, conclui-se que a postura supina associada ? obesidade provoca aumento da sobrecarga do diafragma, desfavorecendo o desempenho do sistema respirat?rio.
|
27 |
Microfabrication of Plasmonic Device: PPBG BIosensor in Cytop, Reflection Itensity Modulator and Atomically Flat Nanohole ArrayHassan, Sa'ad January 2015 (has links)
This thesis details the fabrication of three different plasmon-polariton based devices: a plasmon-polariton Bragg grating (PPBG) biosensor, an intensity modulator incorporating grating couplers, and optically separated electrical contact, and finally an array of nanoholes in an ultrasmooth Au film. The biosensor involves a 35 nm Au stripe, lithographically stepped in width to produce a Bragg reflector. The waveguide is embedded in symmetric, Cytop claddings 8 µm thick. Channels are etched into the top cladding, exposing the waveguides and allowing for the integration of fluidics. The modulator involves a 20 nm Au pad, overlaid with 80 nm Au diffraction gratings, supported by an ultrathin (~3 nm) SiO2 insulator, on a p-doped Silicon wafer backed by an Al Ohmic contact. Electrical contact pads are separated from the waveguide by a thick dielectric (700 nm PMMA), and 2.5 µm vias in-filled with Au allow for electrical connection between the contact pads and waveguides. The nanohole array is machined by focused ion beam into an ultrasmooth Au film revealed by template stripping. The Au film is stacked on a thick film of Cytop between ~5 µm thick.
|
28 |
Opto-thermal measurements of thermally generated spin current in Yttrium Iron GarnetGiles, Brandon L. January 2017 (has links)
No description available.
|
29 |
Investigation of Organic Thin Films for Application in Electro-Optic DevicesJobanputra, Manish C. 22 May 2002 (has links)
No description available.
|
30 |
Desenvolvimento de um sistema opto-mecânico para micro usinagem com laser de femtosegundos / Development of an opto-mechanical system for micro machining with femtosecond laserJosé Tort Vidal 08 June 2010 (has links)
A usinagem de estruturas micrométricas pode ser feita com pulsos laser de nano, pico ou fentossegundos. Destes, porém, somente os mais curtos podem resultar em uma interação não térmica com a matéria, o que evita a fusão, formação de rebarba e zona afetada pelo calor. Devido à sua baixa potência média, contudo, a sua utilização na produção em massa somente pode ser considerada em casos muito especiais, isto é, quando o processamento não-térmico é essencial. Este é o caso da usinagem de semicondutores, aços elétricos, produção de MEMS (sistemas micro eletro-mecânicos), de micro canais e diversos dispositivos médicos e biológicos. Assim, visando a produção destes tipos de estruturas, uma estação de trabalho foi construída com capacidade de controlar os principais parâmetros de processo necessários para uma usinagem micrométrica com laser de pulsos ultracurtos. Os principais problemas deste tipo de estação são o controle da fluência e do posicionamento do ponto focal. Assim, o controle do diâmetro do feixe (no foco) e da energia devem ser feitos com grande precisão. Além disso, o posicionamento do ponto focal com precisão micrométrica nos três eixos, também é de fundamental importância. O sistema construído neste trabalho apresenta soluções para estes problemas, utilizando diversos sensores e posicionadores controlados simultaneamente por um único programa. A estação de trabalho recebe um feixe vindo de um laser de pulsos ultracurtos localizado em outro laboratório, e manipula este feixe de maneira a focalizá-lo com precisão na superfície da amostra a ser usinada. Os principais parâmetros controlados dinamicamente são a energia, o número de pulsos e o posicionamento individual de cada um deles. A distribuição espacial da intensidade, a polarização e as vibrações também foram medidas e otimizadas. O sistema foi testado e aferido com medidas de limiar de ablação do silício, que é um material bastante estudado neste regime de operação laser. Os resultados, quando confrontados com a literatura, mostram a confiabilidade e a precisão do sistema. A automatização, além de aumentar esta precisão, também aumentou a rapidez na obtenção dos resultados. Medidas de limiar de ablação também foram realizadas para o metal molibdênio, levando a resultados ainda não vistos na literatura. Assim, de acordo com o objetivo inicial, o sistema foi desenvolvido e está pronto para utilização em estudos que levem à produção de estruturas micrométricas. / Machining of very small structures has been made with nano, pico and femtosecond pulsed lasers. Among then, only femtosecond lasers may result in nonthermal interaction with matter, avoiding melting, formation of slag and heat affected zone. Mass production with such lasers yet can only be considered in cases where nonthermal effects are of prime importance. This is the case in machining of semiconductors and electric steels, the production of MEMS, microchannels, and many medical and biological devices. Hence, a workstation for production of such kind of microstructures was built with the capability of controlling the main parameters necessary for the machining process. Control of the laser fluence and focus positioning are the main concern in this kind of processing. So, the control of the laser beam diameter (in the focus) and of the pulse energy must be very precise. Positioning of focal point with micrometric precision in the three axes is also fundamental. The system built in this work provides solutions for these problems incorporating several sensors and positioning stages simultaneously controlled by a single software. The workstation receives a laser beam coming from another laboratory and delivers it to the surface of the sample managing with precision the main process parameters. The system can dynamically control the energy, number of pulses and positioning for each individual laser spot. Besides, the spatial distribution of the laser intensity, polarization and vibrations were also measured and optimized. The system was tested and calibrated with threshold ablation measurement for silicon, which is well studied in this regime of laser operation. The results where compared with data found in the literature and attested the reliability and precision of the system. Besides the increase in precision, the automation also turned much faster the data acquisition. Threshold ablation for metallic molybdenum was also obtained and resulted in data not found in the literature yet. Concluding the initial goal, the workstation was developed and is ready to be used in studies that can lead to production of micrometric structures.
|
Page generated in 0.0418 seconds